I tried to update the iOS and never finished the installation
A day ago i tried to update the iOS of my iPad 2.
Everthing looked good but it never started again.
It's stuck in the tiny apply screen with the status bar under it.
Have any suggestion of what to do?
thank you in advance!!!
Try this and see if it will restart the update. If it doe not work, you will need to restore your iPad using Recovery Mode.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
This explains how to restore with recovery mode.
If you can't update or restore your iOS device
Similar Messages
-
App updates say waiting and never finish Loading to my iPad
Hi. Trying to update my apps through the app store on my iPad. I clicked update all, the app icons show "waiting" and never finish. I tried synching to iTunes by hooking up to my computer, but made no difference.
Maybe something here will help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
i just tried to update ios, and now my phone wants me to connect to itunes. I dont have a PC anymore. what can I do?
No, I'm sorry. If you're seeing that Connect to iTunes screen that means the phone is in recovery mode and needs to be restored.
If you can't borrow a friend's computer, you can go to the Apple Store and they will restore it for you. -
Iphone 4 in recovery mode when trying to update it to the last version and I will not update it because I don't want to lose my information
my operating system is the before last oneOpen iTunes. plug in your iPhone to the usb-port while holding the home button pressed. Your bricked phone should now show up in iTunes.
-
I just can't do anything that needs adobe reader
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you! -
I receive an error message when trying to update the Installer
I've uninstalled and reinstalled with no luck: Installer was unable to access a critical file/directory. Please try installing again.(Error code: 43) Contact Customer SupportInstaller was unable to access a critical file/directory. Please try installing again.(Error code: 43) Contact Customer Support
uninstall and clean per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
then right click the installation file and click 'run as administrator', if you have a win os. -
I can't open my ipad now. It is stuck with the picture of the usb cord and the itunes logo on the front.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows the device but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI and i tried all the stuffs that has been written in the manual. Plese give me the Proper suggetion about this issue..!!
If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it. Hence your device cannot be located. I suggest you try your test at some public wifi spot, like a bookstore or coffee shop. These places usually have a location associated with their wifi router.
-
I am locked out of my iPod. I tried to update the iPod so I could download a song I just bought. Had to back up the library on my computer. After I installed the software and updated the iPod, iTunes is asking for the password for the backup, but I never typed a password. Now I can't get into my iPod at all.
That happens some times.
- You can restore to factorys settings/new iPod or
- Try to recovery the backup password by:
How to Recover iPod Backup Password to Restore iPod from Bakcups -
I have a 3gs, and I haven't updated it for a long time because I always have issues when I do. I tried to update the ios today, and it decided to update it to 6.1.3 instead of 7, I didn't think there would be a problem, so I clicked ok. When I came to check on my phone, itunes said there was an error with the update, and my phone was in recovery mode (plug-in sign on the screen). I looked up multiple things to try, I tried putting it in DFU mode, still itunes doesn't see it. The computer also doesn't list it under devices, however when it is plugged in the Apple Mobile Support USB Driver shows up in device manager. I have tried uninstalling itunes and reinstalling, still nothing. I just want to know if there is anything else I can try. Thanks.
No, it is my phone that I've had since 2009. I just hate updating it because every time I do something goes wrong. So I put it off as long as possible. I am getting a new iphone, but I read that to have your backup transfer to the new phone, it must be a backup from the current ios.
-
I had my iphone 4 locked to vodafone uk carrier. I connected the phone to itunes on my pc and tried to update the version to ios 6 through itunes. But it has been locked and asks for sim of previous carrier. how can i return to previous state?
You cannot return to previous state. The update re-locked the iPhone
to the original carrier. You must contact the original carrier to see if
they offer unlocking and if you qualify.
What does it say when you look at Settings=>General=>Carrier?
Be advised that if your iPhone had previously been hacked/modified/
jailbroken to work with other than original carrier, it may be impossible
for the original carrier to unlock it properly. -
I was trying to update to iOS 6 then I thought it was done so i left the wifi but now my screen turns blue and i cant use it.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
hello, i tried to update the to the ios 7.04 and the iphone just stuck and he is not turning on anymore and my computer didnt recugnize him, what should i do?
hopefully you have a backup to either icloud or itunes because you need to but the device into recovery and then restore
-
I have been trying to update to IOS 6 for 3 days now - my Iphone4S is in middle of restore and it gets so far then stops - no error messages - the bar does not move further. it stops at different places -
can anybody help please
KulbirStewart
This forum is for questions regarding the LabVIEW Datalogging and Supervisory Control Module. You will have more luck posting this question in the general LabVIEW forum.
Good luck
Maybe you are looking for
-
Need help with my graphic calculator!!!
Hello everybody!! I need help with my little program I made.... The problem is that I am unable to use to calculate but it is possible to compile the code!! What should I do?? Thanks in advance. import javax.swing.*; import java.awt.*; import java.aw
-
Please can someone help. I have many images on my index page which all work fine. I added a new table as normal and the images will not come through. Checked ftp jpg is small images are there. This is the normal page www.casandras.co.uk this is the p
-
Transfering avip fields to BSEG during Post With clearing
Greetings All, The AVIP table has fields SGTXT (Text) and ZUONR (assignment). If you fill in these fields when you create a payment advice, and you later use that payment advice to apply using FB05 or F-28, these fields are not copied to the resulti
-
Sun Ray server software and Sun DSEE
I want to have a centralized user administration in the latest sun java 7 directory server. i want to set up the system in that the users of the sun ray thin clients will be authenticated from the DSEE. Please assist me in how to make this work.
-
how do I get the program to run?