I tried to update to ios 7.0.1 and my iphone 5 went into recovery mode and i dont have iCloud
I tried to update to ios 7.0.1 and my iphone 5 went into recovery mode and said i had to plug it in to itunes so i did and it restored to factory settings and i lost everything and i am pretty sure i dont have anything backed up on iCloud.. Is there anyway i can recover anything? I had over 1,000 pictures and 500 contacts and now i have nothing.
Then you have no data from which to backup, I'm afraid.
This would be a good time to review the User Guide and learn how to use your phone as recommended so data loss like this doesn't happen again.
Best,
GDG
Similar Messages
-
I have a 4S and just tried updating to the latest iOS version and my phone went into recovery mode and iTunes says I need to restore to factory settings. Anyone know how I can fix my phone without losing all my content?
You would only be able to restore to a backup to iCloud or iTunes:
Restore from Backup
Cheers,
GB -
I Have the iPad 2, download the update iOS 8, but when I tap to install it, it crash my iPad 2 and made it go into recovery mode, why did that happen ? If the update wasn't for the iPad 2 why send the software I mean it crash my iPad 2 I have no song no apps it's all gone, and I don't understand why the update crash my iPad like that, my iPad 2 mite not recover or update because of the new iOS 8 update, I'm very upset please can someone give me a answer for this.
yes i I would of been satisfied that I drop it, and broke my iPad then the update crashing my Ipad 2. Because at least I know I did it, the apps I purchase iI'm not that upset about, but there's one app since I had to reset it to factory as new and update, I didn't want to reset it to factory setting, but I had no choice. I lost a lot of memerie. lesson learn next time I will update all my stuff on my PC to prevent this happening to me again. Never had a problem with pass update it was this update, that teach me a lesson, u can not always be computer free when it come to update any apple device.
-
I have a 3gs, and I haven't updated it for a long time because I always have issues when I do. I tried to update the ios today, and it decided to update it to 6.1.3 instead of 7, I didn't think there would be a problem, so I clicked ok. When I came to check on my phone, itunes said there was an error with the update, and my phone was in recovery mode (plug-in sign on the screen). I looked up multiple things to try, I tried putting it in DFU mode, still itunes doesn't see it. The computer also doesn't list it under devices, however when it is plugged in the Apple Mobile Support USB Driver shows up in device manager. I have tried uninstalling itunes and reinstalling, still nothing. I just want to know if there is anything else I can try. Thanks.
No, it is my phone that I've had since 2009. I just hate updating it because every time I do something goes wrong. So I put it off as long as possible. I am getting a new iphone, but I read that to have your backup transfer to the new phone, it must be a backup from the current ios.
-
I went into recovery mode - and keep receiving error 4005 - tried different usb, computers, did all updates possible nothing helps, my iphone screen shows apple logo and constant waiting circle
Same here. I tried to update my iPhone 5S and iPad 4 to 7.1 but iTunes wiped out them. This thing already happened for iOS 7.0.6 update. What happened to Apple? I am really curious whether Apple is aware of this problem.
-
currently at ios 7.1.. suddenly my iPhone entered into recovery mode without any reasons.. i tried using iTunes restore the iPhone.. after the process finished... I still stuck at recovery mode. any idea?
i have tried to restore via itunes as i would have usually, half way through i get an error code 3194 pop up.....and yes i do back up.
Thanks for your help but i've already tried this a couple of times. -
i was in the process of jailbreaking and updating my ipod and when i was updating it,it went into recovery mode and now i cant get it out of recovery mode so what can i do??
Go elsewhere:
Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues -
I tried uppdating my ipad then it went into recovery mode. I thought "oh no problem, my phone has done this before". So, I hooked it up to iTunes and started to restore/update it, but when the update began, it said it would take 24 hours to download. Already abnormal. Then, the number kept rising higher and higher until it got to 300 HOURS. Then, once it reaches a certain 300, it says "connection failed. please check to see that you have a working connection or try again later" or something like that. So, my iPad is now stuck in recovery mode and I can't exactly talk to people now. What do I do?
Hello aZaa4401
Sorry to hear about your issue. I would start your troubleshooting with the article below to check to settings of your computer to make sure your connection is good to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Regards,
-Norm G. -
I tried to update my iPhone running 6.1.2 to 6.1.3 it showed an error and went into recovery mode but when I try to restore it it doesnt even got restored.......... ! Please Help !!!
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
when i was doing the next update for IOS 8.1 my phone went into recovery mode. i was wondering if i could get out of it without losing everything on my phone?
well if it's in recovery mode, all of the data is already gone. this article mey help you get it working again: http://support.apple.com/kb/HT1808
-
Just bought a new ipod touch a month ago. Went into itunes to burn music and had an update to download which I did. Then I get a message that my ipod has gone into recovery mode. It's locked up with a black screen with iTunes logo and picture of a plugin on the screen. Tried to restore it as recommended but itunes said this device isn't eligible for the requested build. Error codes 3194 and 17. This is very frustrating considering the cost of the ipod and how new it is. Now what do I do? Buy another one? Can anybody fix these types of things? Is this a common occurance or am I just unlucky?
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Then...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
When I downloaded (on PC) the new 5 it crashed my iPad 2. I worked for two days to get it to stop the malfuction, went to the apple store for four hours, iPad crashed again, got a new one, new iPad crashed when I tried to restore my back up. Down loaded iTunes to an employees computer, I was able to restore iPad to factory settings but my itunes account is on my office computer and now I am afraid to plug it into my computer. I did delete the back up as maybe that is currupt and making it crash??? Any body know about this?
This is Linda again. The new iPad actually as not restored on my employees computer. I thought it was working. Message said the device is in recovery mode and can not be restored. I have been at the Apple store for a total of 6 hours and on the phone with support for at least 4 hours. And now the replacement has crashed??? Has this happened to any one else?
-
I was updating my ipod and it went straight into recovery mode so I tried to restore it and it says it cant because the connection
Hello courtney lynn 7420,
Thanks for using Apple Support Communities.
From your post I understand you ran into an issue with restoring your iPod with iTunes. Without an error message or error code provided, the best troubleshooting step for you to go through is the article linked to below.
Resolve iOS update and restore errors in iTunes
Cheers,
Alex H. -
Iphone went into recovery mode after trying to update to 5.1
I went to upgrade to 5.1 and my iphone went into recovery mode and will not work unless i restore it, if i do this will i lose everything!?
dfu mode
How to enter iPhone DFU mode
Connect the iPhone to your computer and launch iTunes
Turn the iPhone off (hold down the power button at the top of the iPhone)
Hold down the sleep/power button and home button together for exactly 10 seconds, then release the power button
Continue to hold down the Home button until a message appears in iTunes telling you an iPhone in recover mode has been detected
When you are in DFU mode your iPhone screen will be completely black
Even though the screen is black, that doesn’t mean the device can’t be interfaced with either iTunes or a custom firmware client (for jailbreaking, etc).
Remember that if you see the restore logo, iTunes logo, or any message on the iPhone screen, you are not in DFU mode but standard Recovery Mode. Again, DFU mode is signified by having a completely black screen on the device. If anything else is the case, repeat the steps above until you enter into DFU mode successfully.
Exit DFU mode on iPhone
The simplest way to exit out of DFU mode is to hold down the Home and sleep/power buttons on the iPhone while connected to iTunes. Then just hit the power button as and this should reboot the device as usual.
And if you’re curious, yes this works all the same on an iPod touch. -
exactly as the title says.
error 3194 came up and well yeah, nothing's working.Most likely you previously used an iPhone hacking utility such as tinyumbrella that messed with your computer hosts file, blocking access to the Apple server gs.apple.com. See this:
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Maybe you are looking for
-
(Access is denied) error
Could anyone please tell me why am I getting the error "C:\temp\Installation (Access is denied)". I am trying to copy selected few files from source to destination. public class filesMove public filesMove() void copyDirectory(File source, F
-
hi experts, Please tell me how to change the font of text in WDA. thanks in advance athu
-
Executing Pro*C/C++ generate code in Oracle 10g Express
Hi, I had developed my application using Pro*C/C++ in Oracle 10g Enterprise Edition Release 2 to generate the code to execute my SQL statements from the application program. Problem 1: Now, as I am trying to migrate my database to the Oracle 10g Expr
-
Sql server does not exist or access is denied.
Hi, i am trying to connect a dadabase to the server from client pc. and i take the sql error [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied to the client pc. i using .udl file and ia trying to connect with sql auth
-
I'm trying to connect to MS SQL Server version 7. I've created an ODBC datasource and in JDeveloper I can create a database connection using the Sun JDBC-ODBC bridge that'll show all the tables and their contents. I've created an EntityObject for one