I tried to update to ios7 but it said to plug into itunes. I've plugged it in several times but the update fails everytime and my phone continues to say plug into itunes
I tried to update to ios7 but it said to plug into itunes. I've plugged it in several times but the update fails everytime and my phone continues to say plug into itunes. Any help is greatly appreciated
Your iPhone was hacked at a "small phone unlocking shop "
Only the carrier who locked the iPhone from new can unlock it no-one else
Anything else is hacking which forfeits any help from Apple and this forum
I also doubt that Orange will touch it
For an understanding what hacking does see here
http://support.apple.com/kb/HT3743..
Since all the UK carriers ( I assume you are in the UK )
offer unlocking you have trashed a perfectly good iPhone
Similar Messages
-
I have updated my iPhone tithe new software and my phone is now saying connect to iTunes I have tried to do this but iTunes is saying I need to restore my phone help! My phone will now not turn on and only shows connect to itunes
Then connect it to iTunes. Hope you backed it up, because the restore will wipe your phone.
-
Updated firefox SEVERAL times in the last few months and even though everything goes ok with the installation, it never upgrades! I get notices on my college website as well as other that I have an incompatible version and have to upgrade, BUT OT NEVER WORKS!!!
In the "More system details..." for your post, it shows an ancient version:
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.17) Gecko/2009122116 '''Firefox/3.0.17''' (.NET CLR 3.5.30729) FBSMTWB
It could have something to do with that acronym at the end, which I think is associated with one of your add-ons.
To see your true current version, you can check Help > About Firefox.
If your true current version is 6.0.2 (today's version), then you may need to clear a setting using the about:config preference editor. Here's how:
(1) Type or paste '''about:config''' into the location bar and press Enter. Click the button promising to be careful if it appears.
(2) Type '''agent''' into the filter box and wait for the list to be filtered.
(3) Right-click '''general.useragent.override''' and choose Reset to return that preference to its default value.
Any luck? -
Keep getting error message "The registry settings used by the iTunes drivers for importing and burning CDs ....please reinstall iTunes." I have done this several times but it doesn't help.
Refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299 -
I downloaded a movie on my apple tv and now when I try to watch it tells me there is an error and to try later. I have tried several times over the last 5 days and nothing changes. Any help please?
What is your current connection via speedtest.net
Make sure DNS is set to auto (settings - general - network)
If on wifi try ethernet -
In the last four months i have attempted to update my billing info, it says my billing information does not match despite verifying it several times with the bank. I walked into an Apple store hoping they would be able to magically fix it, but they were unsuccessful at it as well. I was asked to call into and speak to someone in support but they just ended up sending me to a website so that i would have to explain my situation again. I need help fixing this please!
What did itunes support tell you?
If you did everything it says then you contacted them.
From the article you linked:
If the issue persists, you can visit iCloud Support, iTunes Support, Apple Print Products, or contact AppleCare for further assistance." -
Every time I plug my Ipod Nano or Ipad 2 into my computer I get the same error message. It says that registery settings are missing for importing burning cds and dvds due ot other burning software and to untinstall itunes and reinstall Itunes. I've done this several times and I'm not having any trouble importing cds at all and I can't make the message go away. It always comes up before Itunes will open.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
Open several instances of the update Form - session state handling problem
Hi,
I have a page with a classic report region on a database table and an other page that has an update form region for updating the records on the previous page. The application navigates from the page containing the classic reports region to the update page via the primary key link displayed in the reports region.
Users tend to open the multiple instances of the update form by right clicking in the browser the primary key links in the classic reports region. I couldn't pinpoint the problem yet, but I have 'data overwrite issues' i.e. records are updated with form item values that are entered in the other - concurrently opened - update forms.
Is this the 'normal' way of doing things? I think the problem is that APEX keeps track of only one single instance of any item on a page. If the same page is opened several times in the same browser, APEX updates the state of the page and items within with the one on the most recently opened page or submitted page.
Can I enable users to use the application as they are currently doing, i.e. by opening the update form several times in the same browser concurrently and still make APEX to handle this?
TIA,
TamasI would also argue that the amazon.com example is not entirely valid. Opening your products in multiple tabs and hitting "buy" on all of them sounds analogous to multiple "insert"s in our Oracle world...every item is probably not in your cart and so it's possible to stuff three new items into your cart with no conflicts.
The sticky issue is when you are editing existing data and I am not quite seeing Amazon as an example either of working in multiple windows.
I went to amazon.com and signed in. I did the following:
1. Home page came up with suggested items of children's books. I right-clicked on a book (book B) and opened it in a new window and clicked "add to cart". In my original window I clicked on a book (book A) and added it to my cart.
2. I closed the new window I had opened.
3. In the original window in which I was dealin with Book A, I clicked "View cart". It had books A and B in it. I didn't have a separate shopping cart for Book A and a separate shopping cart for Book B! Apex would do the same thing.
4. Now looking at my cart, I hit Ctrl + N and opened a duplicate window. In one window I changed the quantity on Book A to 2 and on the second window I changed the quantity on Book A to 3. When all was said and done, I still had ONE cart and Book A with 3 was the prevailing record. What is it that they would expect Apex to do with a similar situation?
What is it your users are doing in their amazon.com example that is theoretically different than what Apex supports? -
I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Can anyone help? I am unable to log into ICloud. When I type in my ID and password it comes back with 'incorrect password' I have changed the password several times but it doesn't help. strangely i can use my paswod to buy buy Itunes music but not for Icloud. Any suggestions would be gratefully recieved.
Hello CarenzaRielle,
I know not being able to access your Apple ID can be frustrating. I have located an article that will walk you through a series of troubleshooting steps to resolve this:
Apple ID: If you forget your password
http://support.apple.com/kb/ht5787
Refer to the Apple ID Support page if you are unable to reset your password using the steps in this article. If you know your Apple ID password, you can also choose to change your Apple ID or change your password.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I have a 4S and just tried updating to the latest iOS version and my phone went into recovery mode and iTunes says I need to restore to factory settings. Anyone know how I can fix my phone without losing all my content?
You would only be able to restore to a backup to iCloud or iTunes:
Restore from Backup
Cheers,
GB -
I recently downloaded ios 6.1.3 in my iphone 3, but unable to install the download. This message keeps showing "unable to install update, an error occurred installing the ios 6.1.3 I have tried several times but the same message keeps coming. What is the solution?
There is no such thing as an iPhone 's3'. There is a 3G which can only be updated to iOS 4.2.1 and a 3GS which can be updated to iOS 6.1.3.
Which model iPhone is this?
Identifying iPhone models -
After updating Firefox yesterday I have been unable to access the internet. I have tried the Norton 360 fix several times, but it still doesn't work.
After updating Firefox yesterday I have been unable to access the internet. I have tried the Norton 360 fix several times, but it still doesn't work.
-
I have an iPhone 4. I tried updating it tonight to iOS7 through my just updated iTunes. I received an error message telling me the update couldn't be completed. My phone then went to the screen asking me to connect to iTunes which can't see my phone. Help!!
micron12
Hi I had a simular problem with my iPhone 4 and iPad 3 and found that the USB connection on the computer was at fault so I moved the connection to a USB port on the Mother board.This curred my problem,see if ti works for you.
Windows 7 and windows XP -
I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!
All media and apps should be in iTunes on the computer. Simply select the content desired to sync to the device and sync it.
FYI, backups have never included media or apps.
Downloading past purchases from iTunes
Maybe you are looking for
-
Tecra M9 Vista installation network problems
Hi, Have just got a Tecra M9-136 that I try to install with the English version of Vista Business. Vista refuses to connect to a number of websites: update.microsoft.com www.microsoft.com www.intel.com liveupdate.symantecliveupdate.com The following
-
Forgot my password and the associated email account is no longer active
I cannot for the life of me remember the password for my desktop. I moved some stuff around in my house and so I hadn't plugged in my desktop in months. It demands a password and I can't remember it. Making matters worse, my old email account is no l
-
How do I change my new tab from being yahoo search to google search? I have this changed in IE 8 and works fine. I have removed Yahoo as a search engine in firefox but a new tab is still yahoo. How do I change this using firefox 8
-
Very slow downloads and frequent timeouts
Hi, I've been using the iTunes store with no problems, until about 2 weeks ago. Usual download time for a tv episode is around 40 mins, but now its varies from 80 - 120 hours per episode, that is if it does not time out. I've been searching around th
-
Dear Experts: In China , the tax are involved in the price when buying somethings. If it is possible to let the LIV distinguish the material cost and tax amount . EX: if the quotation is 10 RMB ,and I use 10 RMB as PO price. I hope when I do LI