I tried to upgrade BIOS and the laptop doesn't work anymore

  Hi, I tried to install the update of the BIOS:
BIOS update for Satellite A100/A105, Satellite M110/M115, and Tecra A7
  but unfortunatelly when it start to be installed, a blue window shous up, the laptop resets and never start again. I can turn on the laptop and enter to the BIOS, but unfortunatelly when the Hard Drive try to start to work, it doesn't do nothing, just show a completly black screen. I tried to install windows again from CD, but after press any key for start from CD, the screen goes black and no more happens, until I press the power on button for more than a couple of seconds.
  My laptop is A105-S4004 and I has windows XP.
  Please, if you have any solution please let me know. I really feel very comfortable with Toshiba Laptops since I study in the university but this fact give me a very bad experience with this.
BR
Jaime

It is iPhone and iPod only.
https://itunes.apple.com/us/app/haunted-hollow/id591098046?mt=8
Requirements: Compatible with iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, and iPad. Requires iOS 4.3 or later. This app is optimized for iPhone 5.

Similar Messages

  • I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

    I upgraded my iphone 5 to 6.1.4 and the earphone doesn't work anymore. Anyone has an idea on how to solve the problem ? Thank you

    Hi Jboudet,
    Welcome to Apple Support Communities.
    You can find some suggestions for troubleshooting your iPhone at these links:
    iPhone Assistant
    http://www.apple.com/support/iphone/troubleshooting/
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Have a good one,
    Jeremy

  • Satellite L300-26K - After BIOS update the touchpad doesn't work anymore

    Hi,
    like recommended by tempro, I updated BIOS from ver.2.1 to 2.2 (windows-Version). After rebooting, touchpad incl. tips doesnt work anymore. In bios touchpad is enabled, in system it says unit is working properly. FN/F9 makes no effect. Reinstalling synaptics drivers - no effect - still dead.
    Satellite L300-26K
    Using Vista 32bit home
    How can I restore BIOS to 2.1 again? (if i try the windows-bios utility from V2.1 it says it is still installed - so I cannot downgrade by this easy way)
    Please help - I need my notebook without external mouse (this works)
    yours
    Oliver
    Message was edited by: enigmo

    Hi enigmo,
    I cant imagine that this happened due the BIOS update. Have you tried reinstalling Windows by using Toshiba recovery disk?
    This BIOS downgrade can only be done from an authorized service provider. The technicians can install every version because they have such special tools to make a downgrade.
    On the Toshiba website you can find a list of them. Just give the guys and ask for that. They will help you! :)

  • I forgot my password for my account and the email doesn't work anymore, and the message to sign into FaceTime keeps popping up every time I cancel it, how do I get it to stop?

    I forgot my password for my accounts and a message keeps popping up and won't go away or let me use my iPad, how do I get my iPad back to normal?

    Go to iforgot.apple.com to recover the password for the Apple ID.

  • I clicked "yes" to upgrade iTunes and now it doesn't work. I get an error message stating my computer is missing MSVCR80 and then a message stating Error 7 (Windows Error 126). I've tried reloading iTunes twice. What can I do?

    I clicked "yes" to upgrade iTunes and now it doesn't work. I get an error message stating my computer is missing MSVCR80 and then a message stating Error 7 (Windows Error 126). I've tried reloading iTunes twice. What can I do?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Hi, I wanted to up upgrade my iPhone 4 from ios 4.1 to ios 5.1.1 and now i'm stuck in recovery mode and the restore doesn't work

    Hi, I wanted to up upgrade my iPhone 4 from ios 4.1 to ios 5.1.1 and now i'm stuck in recovery mode and the restore doesn't work
    I tried to restore with ios 5.1.1, with ios 5.0.1 and with ios 4.1
    none is working

    Mcloulou34 wrote:
    Oh my god, it finally worked ! I restored on an old PC and it worked !
    Thanks anyway for your help.
    But allow me to extend to you a simple reflexion about the jailbreak (even if my iPhone wasn't... except if my little cousin jailbreaked without me noticing the advantages or disadvantages) : Would you refuse an alcoholic trying to go to rehab ? Would you really let someone trying to restore a cellular phone die without it, because he went on the bad side a couple of years ?
    Not a great analogy, but this is a user-to-user forum, and Apple will not allow discussion of jailbreaking; if someone tried to help with jailbreaking the message would be deleted. However, if you have a jailbroken phone Apple will generally not block a discussion of how to unjailbreak it. The only problem is that not all jailbroken phones can be restored successfully; it depends on the method of jailbreaking (which I can't discuss without THIS message being deleted).

  • I am trying to import video and the audio doesn't upload with the video. Help.

    I am trying to import video and the audio doesn't upload with the video. Help.
    I upgraded to iMovie 11 because the previous version wouldn't read the type of video I was importing (VOB).  The video imports but not the audio, what do I do?

    What are you capturing from?  You may not hear the auido as it's captured but it will be there.  After it's captured can you see the audio waveforms? Do the audio meters move when you play the clip?  If so then go to "View" then "Audio Playback"  and set it to 'Built-in Output" if you're monitoring audio through the computer.

  • TS1702 My 3G iphone only loads few apps since I updated and the camera doen't work anymore, what now. Tried to reset to original settings and now it won't load apps, even old ones.

    My 3G iphone only loads few apps since I updated and the camera doen't work anymore, what now. Tried to reset to original settings and now it won't load apps, even old ones.

    What model iPod do you have? If yo have a 2G iPod. many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.

  • I just bought a new apple imac pro laptop. the did the updats at the store and put in a password for me.I got home and the password doesn't work.

    I just bought a new apple imac pro laptop. the did the updats at the store and put in a password for me.I got home and the password doesn't work.

    Resetting User Password in Lion, Mountain Lion & Mavericks
    Boot into your Recovery Partition by hold down the Command and R keys whilst booting.
    When the Recovery screen appears, go to the Utilities menu and open Terminal.
    In Terminal, type:
    resetpassword
    ...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
    Good luck,
    Clinton

  • Sometimes my screen starts to move on my iMac.    It's like it's trying to turn the page and it gets off center and the mouse doesn't work when it happens.  It usually lasts about 15 seconds or so and happens often.

    Sometimes the screen on my imac starts to shake like it it trying to "go to the next page".   When this happens it usually freezes up for 15 seconds or so and the mouse doesn't work.

    Have you tried a hard reset of the iPod to see if that helps?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. 
    Otherwise, work through each of the troubleshooting suggestions in this Apple support document as necessary.
    iOS: Troubleshooting Wi-Fi networks and connections
    B-rock

  • I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor

    I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu

    You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
    NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR.

  • I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
    I know that Acrobat, full version, 10 works with Lion...use it myself.

  • HT1657 I rented a movie and the sound doesn't work, how do I fix it?, who do I direct to for a complaint?

    Hi, I rented warhorse HD, and the sound doesn't work, my itunes version is 10.6.1(7). How do I fix it or who do I direct to get my money back? Thank you

    I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

    My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

    I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited.  In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items.  I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible.  I simply deleted that item and now I don't have the situation you described and my wireless is connected.  Hope this helps!

  • I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

    i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

    Will u help me or not?

Maybe you are looking for

  • Remote and iTunes 8.1 with AirPort deactivated?!?

    Ok, I just wanted to try if the new iTunes DJ thing works, updated the iPhone remote app and started to "vote" for songs, when I realized that my MacBook was not connected to my WiFi-network... but it still worked! Now I wondered how that was possibl

  • Validation functionality in service entry sheet

    Hi, We have made provision to use field - External service no- to manually input some number for reference in the line item tab in ML81N. This number is used to track LR no for internal usage. There will be s separate number in each line item. Since

  • Calling third party process from webservice

    Hi there! A client would like us to build a process, actualy a webservice, to generate PDF documents based on XML files generated by a process outside LiveCycle. For us this outside process is just a black box that will deliver XML files to be consum

  • Decrease spacing of footnotes?

    I'm working on a document with footnotes at the bottom of the page and I'm trying to find a way to have them not be spaced out so much. Currently they're more than double-spaced and I haven't found a way to bring them closer to single-spaced. Can any

  • How do I manage to get the questions back into the raw in the header of the answering view?

    Some how the text in the header of the view of answers is gone.. I deleted "answers" we hade made when testing the form, and suddenly the text in the header was gone too. Is there any chance to get it back? To import it somehow from the form back in