I tried updating my IOS to 8.0.2, but the OS X Han Recognizer is in the way, I did control shift space bar alot of times, but it dint work now my ipad is stuck in recovery mode, can anyone help?

Can anyone pls help?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Similar Messages

  • I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

    I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Tried updating to iOS 6, now my phone is stuck in recovery mode...help?

    I tried updating my phone to the iOS 6 software, and my iTunes won't read my phone at all. It keeps saying that "your iphone is in recovery mode and needs to be restored." I restored it for an hour and it didn't work at all. Now my phone is stuck in recovery mode. I'm away at college and I don't know how to fix it. Help!

    No, it is my phone that I've had since 2009. I just hate updating it because every time I do something goes wrong. So I put it off as long as possible. I am getting a new iphone, but I read that to have your backup transfer to the new phone, it must be a backup from the current ios.

  • My 3g phone is in recovery mode can anyone help please

    Hi All, I bought a 3g Iphone, connected to my ITunes and now in recovery mode, cant get out of it. Please help
    thank you

    1. Disconnect phone from iTunes, leaving the cable plugged into the USB port ON THE COMPUTER (not an external hub or keyboard port
    2. Press the home button and while pressing, plug the dock end of the cable into the phone, and continure pressing the home button until iTunes detects the phone in recovery mode;
    3. Follow the prompts to restore.
    If the above sequence doesn't work, try this:
    1. Start iTunes and plug in phone
    2. Press BOTH home and on/off buttons for at least 10 seconds until the Apple logo appears, then continue pressing the home button alone until iTunes detects the phone in Recovery Mode, and follow the prompts to restore.

  • My iphone 3gs factory unlocked phone frequently goes into recovery mode. can anyone help me out from this?

    my iphone 3gs is an factory unlocked phone running on ios 6.1.3 which frequently goes into recovery mode. mostly atleast once in a week...how can i fi this problem???

    There's a whole lot to read in your post, and frankly I have not read it all.
    Having said that, this troubleshooting guide should help:
    http://support.apple.com/kb/TS1538
    In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

  • I tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??

    i tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??

    Try Restoring it 3 times in a row and see if that works.
    If not that error can indicate one of two things: Your iPhone was at one time jailbroken, had the iOS version rolled back, or ran an unauthorized beta and if none of those things are true it is a hardware error.

  • Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6

    Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!

    Restore ur iPad to iOS 5 or 6( if u have downloaded)
    <edited by host>
    Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
    Then set up your iPad as a new iPad .
    Here you go, Now your iPad will be perfectly fine..

  • IPad 3 stuck in Recovery mode while trying to upgrade

    I attempted to upgrade my iPad 3 and received the error message that there was not enough memory. Linked it via USB to iTunes on PC laptop (updated iTunes to latest version). Error message said unable to upgrade the iPad, my only option is to Restore. However, that will erase all my data and settings which I have not backed up. Now I'm stuck. Either restore and lose all or leave iPad as is ... only problem with the latter is that the iPad is stuck in Recovery mode and everything I have tried does not release it. Would appreciate help with this as I now have a non-functioning iPad! Thank you.

    Hello ardsdon,
    Thank you for using Apple Support Communities. 
    I see your iPad is stuck in recovery mode. The following article addresses putting your phone into recovery mode and restoring it. 
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    Jeff D. 

  • My IPad is stuck in recovery mode and now ITunes wont recognize it, what do I do? Keeps giving me a long error message.

    My IPad is stuck in recovery mode and now ITunes will not recognize it, it just gives me this long error message. What do I do, I've uninstalled and reinstalled ITunes.

    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • I started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

    started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

    Any numbers or other details on the mesages given?
    Did you try to connect in recovery mode again? iOS: Unable to update or restore
    In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues

  • Hi so my ipad is stuck in recovery mode.  Once I connected to itunes to install the ios 8 software it says that its eligible for the request build and I tried the sudo nano command and that didn't work either. Please help thanks!

    Ipad mini stuck in recovery mode.
    My itunes is up-to-date.
    Sudo nano command is not working.

    yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

  • My iPad is stuck in recovery mode.  I already downloaded Snow Leopard and am making no progress.  Help!

    My iPad is stuck in recovery mode.  It was suggested before that I upgrade my computer, so I downloaded Snow Leopard and have tried resetting it, but it still isn't working.  What can I try next?

    FORCE IPAD INTO RECOVERY MODE
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...

  • Our iPad is stuck in recovery mode after attempting to update.

    Our iPad is stuck in recovery mode after attempting to update to latest iOS..Help.

    It IS plugged into the pc. iTunes doesn't even recognize hat any device is connected.
    Reiboot isn't even working. considering trying DFU mode. no idea if that will even help.

  • TS3274 iPad 2 stuck in recovery mode

    iPad is stuck in recovery mode. I don't want to restore and lose data, is there a way to do this?

    Restore ur iPad to iOS 5 or 6( if u have downloaded)
    <edited by host>
    Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
    Then set up your iPad as a new iPad .
    Here you go, Now your iPad will be perfectly fine..

  • My iPad is stuck in recovery mode, and wont stay turned off in order to use redsnow.

          Alright so my iPad is stuck in recovery mode. I did some research and arrived at redsnow to fix the problem. In order to use redsnow's recovery fix option I have to power down my iPad. When I hold the sleep button though, no "slide to power off" appears, the screen just goes black then reboots into recovery mode 3 or 4 seconds later. Restarting it via holding the sleep and home buttons doesn't do anything. How do I get it to stay powered down? Any advice would be greatly appreciated.

    I believe I may have used the wrong terminology. My iPad screen looks identical to the picture shown in the link, which is what I reffered to as Recovery Mode. I was looking for a way to return to normal functionality, without having to restore my iPad. I have never backed up this iPad and would prefer not to lose any information on it. If this is impossible then I will just restore it and carry on.
    My main issue with restoring it is that I don't want to lose the pictures on it. If the restore doesn't erase the pictures, then I apologize for wasting your time and will be restoring it immediatly. However if I will lose the pictures than I'd prefer any other method of exiting this screen.

Maybe you are looking for

  • Creating a photo gallery with photo download option

    Good morning, I need to create a page on my website where I can have a photo gallery WITH the option to download a photo, or the entire gallery. Can someone tell me, or point me to a video tutorial on how to do this? If you are familiar with SmugMug,

  • Please help. Error message "Document is licensed for a different user account"

    I purchased a ebook on B and N and saved to my PC. I added this ebook to the library in Adobe Digital Editions and it is displayes. Whena I click on it to open I receive the error message"Document is licensed for a different user account". Please let

  • Number range in SD documents

    Dear All, In number range VN01 I have 98 records. I need one more range, But when doing this getting the information: "Enter inverval without overlap" So, I can not add the range. Is there anybody to hlep me to over come. Thanks N B/R Bishnu 26/11

  • "Invalid Metadata Objects" when creating materialized views

    Hi experts, I have run into some trouble. I had an analytic workspace that grew too fast (see 11.2.0.2 AW size grows steadily with every cube build so I deleted it and created a new one. It seemed to build fine using the tip that David Greenfield gav

  • Where do i find the open document password, i dont have one

    I cannot open a file because it wants a document open password, i dont have one, what do i do?