I tried updating my iPod touch to the newest update. But my iPod was unable to complete the update now it doesn't even turn on completely. The apple logo appears but then the screen goes blank. What should I do?
I tried updating my iPod touch to the newest update. But my iPod was unable to complete the update. Now my iPod doesn't turn on completely. The apple logo appears but then the screen goes blank. I've tried charging it, letting it discharge, I've tried things I found on the internet but nothing seems to be working. What can I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Original text by lllaass
-Ethan
Similar Messages
-
my iphone4s blackout.. I tried the on/off and home botton and only apple sign appears and then blackout again.. What should I do?
OP has posted twice already responded to post that was correctly in this forum which included fact that it had been immersed in water ...........................
-
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
when i try to install the mac os x 10.7.3 i start up the computer and apple logo appears and it stucks why? and what should i do?
How are you trying to install Lion 10.7.3? Where did you get that version as the current download version is 10.7.4.
Why are you installing 10.7.3? What OS X version was on the computer before you started this install? -
On my iPod Touch, the Apple logo appears and then shuts off again. What do I do?
It has been doing this for a while. It became unresponsive so I turned it off and now it won't turn on. I know it's not dead, because I had just got done charging it all the way. I've tried almost everything and it still doesn't work. Help?
Try a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
Apple logo appears and then phone freezes
hi,
my phone is somehow frozen suddenly. i tried rebooting but every time the apple logo appears and then the screen freezes and nothing happens! what should i do? please help!I think it will remove the jailbreak but should not affect the unlock if it's truly carrier unlocked. Warning: many people believe they have an officially unlocked iPhone when in reality it's JB to unlock it. In this case, a restore will relock it.
-
I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?
If it is otherwise working, you can change the battery. If you want to do it yourself, you can buy the part on eBay and other online sources. Just make sure you know the type of iPod you have so that you get the right part.
http://support.apple.com/kb/HT1353
There are online guides, including the ones on this web site
http://www.ifixit.com/Device/iPod
(Note: Most replacement batteries come with plastic/nylon tools seen in the guides.)
You can also have a repair business do the work.
If it is just the battery, if you do a Reset (using the Menu and Select buttons) while it is connect to your computer, I think it should still be recognized by iTunes. -
Hello. I am owner of an iPod Touch 5gen. I have an error "iTunes was unable to load provider data from sync services". I tried: All Apple's tutorials including reseting sync data, reinstalling and deleting all of iTunes components including deleting it from system registry. My system is Windows 7 64bit.
UPDATE: The true error is : '
"itunes was unable to load data class information from sync services"
Any of the topics didnt work.
Sync on my wife's laptop works. -
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple -
when i start my ipad 3 the apple logo appears but then a loading bar appears and it stucks i have restarted it but nothing is happening pleeeeease help me! i love my ipad sooo much.....!!!
Try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If that does not help, you may have to restore your iPad.
iTunes: Backing up, updating and restoring iOS software.
If that doesn't work - You will have to use recovery mode
iPad: Unable to update or restore -
when i clicked on erase all content and setting in my iphone3, it first shut down and next the apple logo appears and then nothing happens, its been 12hrs since like that. i tried force restart by clicking the home and sleep/wake button, and still same issue.
I believe with the 3G and the older iOS, erase all content and settings acts differently than the newer iOS. You can use this support document http://support.apple.com/kb/HT1808 to place the phone in recovery mode and restore it.
-
need help with MacBook Pro 17inch willnot start apple logo, spining wheel, then gray screen, a circle with digional line through the circle
Mac OS X- "Broken folder" icon, prohibitory sign, or kernel panic when computer starts
Mac OS X- Gray screen or prohibitory sign appears during startup -
I have a problem with iPad2, apple logo appears but iPad won't boot up, then logo disappears & iPad dies - probably caused due to insufficient hard disk space (foolishly loaded up too many apps) - any help/advice greatly appreciated
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
ipad not turning on.On charging apple logo appears in between.But its not turning on,tried to restore by pressing start & home button for 10 seconds.But its not working.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
My itunes store home page opens just fine and i can search music and evrything but when i press the "redeem" button it will begin to load then stop and go completely blank. what should i do?
I figured it out!
I read a solution for something that sounded similar.
Anyone in similar position:
Open iTunes app on iPhone, and pick an option from bottom, such as music. Then scroll down to bottom of page and where your iTunes ID is, press on it, and pick sign out.
Then return to home screen, and double press home button and press and hold on first icon showing, until a minus symbol appears in the top left of icons present. Press on each minus symbol on each app in turn, until all app icons have disappeared. Then Restart the phone by pressing and hold the home button and the on/off/standby button at top of phone, until the apple symbol appears in centre of blank screen.
Swipe to turn phone fully on and open settings and scroll down to iTunes and apps option and tap that. Pick sign in and put in your apple ID, it will accept it and then return to home screen and open iTunes a you'll find it works fine
Simple really, but some like me won't think f this themselves!
Hope that helps
Maybe you are looking for
-
Execution of a command in Linux
Hi expert, I wrote this java class, that it's working in Windows, but not in Linux. Seems not executing the code have you any idea why? 1) you provide a userlogin 2) check if the userlogin file exists 3) if not it create a file where name and content
-
My iPad one won't charge with any cable I buy? Tell me what I am doing wrong.
I have an iPad 1 and have had no major problems with it til now. I want to continue using it, I use it for many things and it would suck if it stoped working because of something IDK about. My first and only apple product. The charger cable (That cam
-
It appears that I cannot share documents between my iMacs and and Mac air using icloud without first opening document in and IOS device. Is this true. If so, then icould is petty much worthless for me, especially since idisk will be discontinued ne
-
Can't add audio to video file in QT 7.1.5 on WinXP.
Quicktime Pro 7.1.5 on a PC running WinXP. I have created a video file (.mov) and now wish to add an Audio track. Following the instructions in Help, however nothing seems to happen - click on the menu item to Edit->Add To Movie but nothing happens -
-
Oracle 10g Express Edition - change default working directory for save ?
Greetings all, I'm completely new to Oracle but I am quite sure that on Oracle 9i, when using the <save xyz.sql> statement, a file was saved somewhere on the hard drive. I accidentaly managed to convince XE to save .sql files on C:\ but I would like