I- trigue 3330 2.1

Hi Everybody,
After I moved into my new flat I installed my I-Trigue speaker system again but i cannot get any sound. Before disconection of all the computer/speaker cables, everything was working perfectly.
I can get sound with my headphones from the computer output (So sound card is ok) or from the headphone-output of I-Trigue. however, It does not work itself. Even I tried I-Trigue with my laptop I can not get any sound as well.
Do you have ay idea about the problem? Thanks for your helps.
PS: I dont know whether is relevant but I have a new monitor..

Hey! I've got the same problem with the same kind of speakers! When im listening to something volume is coming down and after a some time its coming back to its previous level! Coming back to its normal level can be forced by turning the speakers on and off! thats all i've discovered...
i also heard that some of creative speakers have kind of (f**k i dont know the word in english :P ) which works like that: when subwoofer is hot it automatially turns the volume lower to save your speakers from burning form hot :P or something like this :P
hmm... what i discovered that is no matter what i connect as source of music! effect of volume is the same
or maby you discovered the reason of this?
ps.
sory for my very unperfect english...

Similar Messages

Which Creative Speakers to buy Next GigaWorks T20-T40, or I-Trigue 3330, 4000 or L3800

Hi just wondering if anyone could make a recommendation on getting some new 2.1 or 2.0 speakers.. After my old Creative 4.1 have died I have been looking at the following models and my main use will be for Music and movies in my room. So they don?t have to be that loud..
Gigaworks T20 & T40
I-Trigue L3800
I-Trigue 3330 or 4000
I heard the T20 and they sound good for a system with no Bass but seam a bit blocky. Next the I-Trigue 3330 also sounded good as long as you don?t crank the volume up too much. As for the I-Trigue L3800 I have read they are a 3 way speakers system and was wondering what people thought of them. Would I get a better sound out of them.
Thanks

Subwoofer I-trigue 3330 broken

Hi dear friends, i have a 2+ sistem i trigue 3330 very nice but few days ago the sub loudspeaker start to go very bad. I would know were i can buy in Italy the spare?( marked Cambridge audio)plese help me i need to start again with this wounderful system.... Bye Joe My e-mail: [email protected]

Hi,
The speakers system do not require drivers to operate. You might want to make sure that the sound card/onboard audio device is installed properly.
Hope this helps.

Creative I Trigue 3330 Adapter problem!!!

hey guys am a kind of novie in the whole sound system game, i went to turn on my speakers this morning i smelt a burning sensation from the adapter, any help guys? would be greatly appreciated, thanks in advance
Asad
Message Edited by asadk on 04-02-2009 05:07 PM

I've seen the support department has replied to other problems from users on this forum with solutions for their problems. Why not here?
because it's user to user only? than what choices do we have?
Best Buy won't take back the faulty speakers because it's past 30 days. Most retailers may accept up to 3 months, but this one doens't apparently.
any other suggestions?
maybe the administrators (who do monitor these forums obviously) could pass this on to the Support Department since this is not an isolated case.

I-trigue 3330 problem

Hey
I just bought this speaker set .....But only one speaker is working ?
Is it my Sound card to old or ?
Michael

I've seen the support department has replied to other problems from users on this forum with solutions for their problems. Why not here?
because it's user to user only? than what choices do we have?
Best Buy won't take back the faulty speakers because it's past 30 days. Most retailers may accept up to 3 months, but this one doens't apparently.
any other suggestions?
maybe the administrators (who do monitor these forums obviously) could pass this on to the Support Department since this is not an isolated case.

Help please no sound

Hi all new to the site so hope you can help. I recently bought my daughter a second hand pc for browsing the internet its all set up fine but I have no sound at all its a compaq presario AMD athlon 64 3200 plus. No sound comes from the monitor or the headphone socket, and no sound from the speakers 2.1 creative i-trigue 3330. In the device manager it wont let me configure the audio its in grey. also there is an exclamation mark next to the creative x-fi. I tried to update this an it came up with code 10 error I tried to un install and re install no change I dont have the original disk any ideas.
Thanks
Katy

Hi I have downloaded and installed new driver because of the code 10. Everything looks ok now nothing is on mute. I can select speakers everything as you should now but still no sound.
I am having to sort the problem via remote access because daughter lives 2 hours away, and before installing the new driver I couldn't hear any sound either from my computer, now the new driver is installed I can hear the sound that she should be hearing from her end.
Is there anything else I can try. Getting stressed now!
Thanks again
Katy

SB Audigy 2 NX on Windows 7, speakers + headphone problem

Hi All, I plugged my USB SB Audigy 2NX into a Windows 7 x64 laptop. I have 2.1 Stereo speakers plugged in to the SB 'FRONT' Jack. And sometimes plug a stereo headset into the 'SIDE /PHONES' jack.
This works fine on my XP system. And when I plugged in the headphones, the sound will just play on the headphones
THE PROBLEM IS, on the Win 7 laptop, when I plug the headphones into the Audigy 'SIDE /PHONES' jack, the sound still plays thru BOTH the speakers AND the headphones. Does anyone have any idea why this is happening?
USB Sound Blaster Audigy 2 NX
Installed Driver: the Creative Sound Blaster Audio Driver .0.0099 (Feb 200), no errors detected on the install.
Creative Labs I-Trigue 3330 2.1 Speakers

Ok, thanks. Is the PCMCIA Audigy 2?ZS able to decode from external sources? Or is there a way for the laptop (via software) to decode, effecti'vely only using the NX as a hub to connect to the speakers?Message Edited by Alonso4 on 03-27-200704:54 AM

HP 3330 MFP scanning function doesn't work

I have a HP 3330 MFP wirelessly networked to (2) computers via a WPSM54G. I am able to wirelessly print from both computers, but I am unable to scan from either. When I open the HP LaserJet Document Manager, and initiate a scan, I receive a message "hp LaserJet Scan Control Viewer...Unable to communicate with the device. The device is disconnected or powered off." (The MFP is "on", and if I power the HP 3330 MFP "off" and "on", the result is the same.)
If I connect the printer directly to the computer(s) via a USB 2 cable, the scanning function does not work - since the Linksys printer drivers were installed. (I also noticed in Control Panel -> Printers and Faxes, there are some printer functions (ie., Scanning, Fax) have been removed - since the Linksys printer drivers were installed on the computer(s); and Network HP LaserJet 3330 (shared) was added as the default printer.
Since the printing function works fine, I'm wondering if 1.) the installation of Linksys printer drivers on the computer(s), removed or altered the HP drivers/scanning function, 2.) if there is a printer driver that will allow the computer/printserver to recognize a scan command and/ or the printer, or finally, 3.) if the HP 3330 is simply not capable of perfoming all of the functions (scanning, faxing) that the WPSSM54G claims it is capable of perfoming...
Any ideas?
Thank you for your thoughts.
saj

Got it working. The problem was with the firewall (Bit Defender). Once I turned it off, and connected the print server (wirelessly), the scan function worked like a charm. (It would be nice - in a perfect world - if when the print server experiences a problem, the Linksys software/ drivers would identify the cause, and at least point you in the right direction....you know, something like "...can't communicate with device, try turning off your firewall")
Hope this helps someone.
saj

Wireless printing for an HP Laserjet 3330 - need print server

Anyone know of a good wireless print server that will work with an HP Laserjet 3330? I don't care as much about the full multi function capability as I do simply printer remotely. Just returned a Linksys that wasn't compatible and don't want to go through that again. Could buy a new printer but this one works just time.
Thanks

Yes, one of the others is an HP LaserJet 1320 and the other is a Samsung ML-2010. I'm using a Canon MF4360 at home and the 1200 seems to be the only one with this problem. All other systems are running the most recent SL and well as Adobe Reader.
Susan

HP LaserJet 3330 shows horizontal lines exactly every 1.5" when printing a completely white page

HP LaserJet 3330 shows seven or eight about 3.5" long cloudy horizontal lines spaced exactly every 1.5" even when printing a completely white page. This occurs also when copying and faxing.
There are also 2 very thin vertical lines running down the whole page approx. in the middle. They are exactly 1" apart.
However, a scan of a white page viewed on my computer (not printed) is completely clean.
Windows 7. No changes or upgrades.
This question was solved.
View Solution.

Propbably the toner cartridge if they are 1.48" apart it could be the developing cylinder or the charging roller that are both in the toner cartridge. So a good guess if you replace the toner cartridge, the problem will go away. The vertical lines could also be part of this issue.

Creative I-Trigue 2.1 (3300) Left channel not working

Just recently purchased the Creative I-Trigue 2.1 (3300) for my boyfriend's gaming station. I have his audio settings set to 2.0 CH speakers, and have the thing plugged into the appropriate hole. The subwoofer works, the right speaker works, but there is no sound comming out of the left. I discovered that the satellite speakers themselves are operational by individually plugging them into the right speaker output line on the back of the subwoofer, but neither of the speakers work when I plug them into the left audio output line in the back of the subwoofer. I have come to the conclusion that the subwoofer is possibly defective.
Just to rule out any other possible errors on my part, I've tried it on three different computers with the same result. The equalizer settings on all computers are not skewed.
Please help. Depending on the results I find here, I'll either be going back to the store to have them exchanged for the same product.... or get a refund :womanmad:
Yvonne

I have the same exact problem, but I can't return mine because I moved 3 hours away from the place I got it What did u end up doing to fix it, and is it something that I can fix? I really do not want to spend time sending them back to the company for the new set, that takes forever, not to mention the shipping cost >_> I had to do the same thing for my Eclipse 2 keyboard cuz of bad keys... please help me

I-trigue 3400 soundwoofer not working / right speaker low output compare with left speaker

Hi, basically i have 3 sets of creative i-trigue 3400 purchase as second hand. All these 3 sets have some minor problem. I trust my ability i able to repair it as iam a professional electronic engineer. Just need some advance information or guidance from creative big brother and sister.
i do check with the controller everything, because i have 3 sets so i able to verified the problem.
1)subwoofer not output----Is it problem with amplifier or any transistor damage? How do i start checking and verified it?
2)right speaker low output compare with left speaker----I already analysis it and would like to know is it the transistor prolem? Please let me know so i can start with my repairing.
From what i know, this model seem like going to discord soon, so is it possible send me a partial schematic on the 3400 so i can repair. Please let me know and reply me, i am waiting your answer. Thank you

seem like nobody reply my email, can creative technical provide some guide. I already mention i will repair myself.:angry:

Problem with I-trigue 5600 . Please help!

hi,
My I-trigue 5600 worked perfectly for over 4 years. Buy recently, my rear right channel stoped working I 've tried everything : all satellites work poperly,drivers are ok, I tested it on 2 computers. There is still the same problem. Unfortunately Creative dosn't have after-guarantee service.. So, I tried to open subwoofer, but the inerity is too complicated with many areas flooded with glue or isolation. I tried also to buy another subwoofer / i believe it must have small damage , but the rest of speakers work great and the voice of subwoofer is good as well/ but there is problem with buying a subwoofer separately. Becouse there are only auctions on net.
So , what I supposed to do? Does Creative have separated spare parts to my subwoofer? Can I buy another subwoofer anywhere?
Can I replace my sub to similar from another speakers system and which one would be suitable.
I don't want to change my speakers. They are the best for me, but defect of one chanell is annoying. Really.
I wanted to buy x-fi elite pro ,but now it's pointless.
Please help me
Despere Makary

Hey! I've got the same problem with the same kind of speakers! When im listening to something volume is coming down and after a some time its coming back to its previous level! Coming back to its normal level can be forced by turning the speakers on and off! thats all i've discovered...
i also heard that some of creative speakers have kind of (f**k i dont know the word in english :P ) which works like that: when subwoofer is hot it automatially turns the volume lower to save your speakers from burning form hot :P or something like this :P
hmm... what i discovered that is no matter what i connect as source of music! effect of volume is the same
or maby you discovered the reason of this?
ps.
sory for my very unperfect english...

Connecting 2 Monitors to HP Pro 3330

I tried to connect two monitor to my HP Pro 3330. One using VGA socket and one to DVI socket (using VGA to DVI convertor as the new monitor only comes with VGA cable). The graphics card is Intel HD. The computer was able to detect the 2nd monitor connected (under Control Panel>Display). I selected the extended display mode. However, the message of “no signal found” was displayed in the new monitor even I have updated the graphics driver.What should I do ?Do I need to buy another graphics card in order to use the 2nd monitor?

Yes, it is possible to run 3 monitors at once on the Retina MacBook Pro (2 connected over Thunderbolt and one over HDMI).
Displays used in picture below:
Retina on laptop @ “best for Retina”
iMac used as a display @ 2560 x 1440 via Thunderbolt
iMac used as a display @ 2560 x 1440 via Thunderbolt/DisplayPort
LG monitor @ 1920 x 1200 via HDMI
Hope this answers your question.
http://apple.stackexchange.com/questions/53759/how-many-external-displays-can-i- power-with-the-15-retina-macbook-pro

Does Red Hat Linux 4 OS will support in HP 3330 i5 Processor

Does Red Hat Linux 4 OS will support in HP 3330 Using i5 Processor , Kindly tell me that this PC will support this OS or not
This question was solved.
View Solution.

Hi,
Based on this, HP does not support, that won't stop you. You have to use other source to get all drivers for it.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I- trigue 3330 2.1

Similar Messages

Maybe you are looking for