I-trigue 3400 soundwoofer not working / right speaker low output compare with left speaker

Hi, basically i have 3 sets of creative i-trigue 3400 purchase as second hand. All these 3 sets have some minor problem. I trust my ability i able to repair it as iam a professional electronic engineer. Just need some advance information or guidance from creative big brother and sister.
i do check with the controller everything, because i have 3 sets so i able to verified the problem.
1)subwoofer not output----Is it problem with amplifier or any transistor damage? How do i start checking and verified it?
2)right speaker low output compare with left speaker----I already analysis it and would like to know is it the transistor prolem? Please let me know so i can start with my repairing.
From what i know, this model seem like going to discord soon, so is it possible send me a partial schematic on the 3400 so i can repair. Please let me know and reply me, i am waiting your answer. Thank you

seem like nobody reply my email, can creative technical provide some guide. I already mention i will repair myself.:angry:

Similar Messages

Envy 2 Since 8.1 update keyboard does not work right did several driver updates with no results?

I even restored to factory settings, can i go back to 8.0 if Hp and Ms can't get it right?

Pete,
The invitation to Upgrade to Windows 8.1 comes from Microsoft.
If you did not make backups, you might be able to order replacement Media from HP.
You may find Recovery Media at your computer's website. Start at:
HP Drivers & Downloads
If available, the Media has its own category: Order Recovery Media
==========================================================================
If you cannot find it, or you are outside of the US / Canada, you can call HP directly:
Worldwide Support Portal
Contact HP – USA - Phone Assistance
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
============================================================================
Microsoft does care about their customers. Microsoft's enthusiasm for Windows 8.1 might have overshadowed their inclination to warn you that not EVERY computer on the planet is able to run Windows 8.1 easily - or, in some cases, at all.
The Envy 2, IF you are talking about the Envy X2 - one of various models, should be able to run Windows 8.1 if some precautions are taken ahead of time.
For example:
Every driver must be updated to Windows 8.1 before you Upgrade
Most user installed programs should be removed
Most user settings should be set back to standard. For example, set a standard background, do not expect your fancy Start Screen settings to survive, back up and strip the stuff from your Desktop.
All connected devices must be removed.
Security software must be removed.
You should not attempt the Upgrade without having the means to get back to where you started. Translation: Make Backups - Make Backups - Make Backups
The following might help you if you want to try again:
Upgrade Windows 8 to Windows 8.1
Good Luck! Windows 8.1 is worth the journey if you can be successful.
Click the Kudos Thumbs-Up to show appreciation and say Thanks.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround to your Question!
Kind Regards,
Dragon-Fur

Firefox is not working right in KOC.. loads with a bunch of junk in program?

has anyone fixed the problem with firefox and KOC, if so how do you fix?

Your NAS is obsolete. You may be able to work around the problem by following these instructions:
Connecting to legacy AFP services

Remote not working right

I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Solved!
Go to Solution.

netmouse wrote:
I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Might not even be a remote issue. Have you tried rebooting the box?
If you do think it's the remote it's still under warranty.
You can get a free replacement easy within the dvr's menu.
Here is a page that tells you ways to get a replacement.
http://www.verizon.com/support/residential/tv/fiostv/remote+controls/troubleshooting/questionsone/12...
Get a new remote and if you still have the same issues then you'll know its the dvr that needs to be replaced.

Is there any way to redownload iOS 5 my iPod touch 4 th generation white 32 gig is not working right?

My iPod is not working right. It's slow and lags and just doesn't work and always exits apps. I was if there was any way to redownload ios5 because it does the same things after I've reset about 4 times. Please help! It's even lagging why I am typing this. The thing that I checked below are all of the things that are not working on my iPod.

You cannot reinstall iOS without doing a restore. But you might first try a software update. If you have iOS 5.0 or 5.0.1, you can update to iOS 5.1 by going to Settings > General > Software Update.

TS1398 Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automaticall

Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automatically. Please help.
Thank You.

See:
Can't connect to the iTunes Store

IPad 2 was updated to latest iOS 7 and has been not working right since. I have tried to do a restore but still continues to go into reboot mode by itself and very erratic. Can no longer trust it. I tried to complain to Apple but have to give them 20 buck

iPad has not worked right since it updated to latest software. Tried to question Apple about it but it costs 20 bucks just to lodge a complaint. Is this normal Apple behavior or am I missing something. Also anyone else having issues with upgrade to iOS7. It was working great until that point and now goes into reboot mode often and sometimes will continuously reboot several times. I have tried to restore but that didn't clear the problem. Any thoughts or help would be appreciated.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

HT4623 My iPad mini is not working right ?? On some apps

My iPad mini is not working right on some apps

You can always try to reset your device and see if it helps matters any:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

T42 keyboard not working right, HELP PLEASE

My keyboard is not working right. If I push the key it wont work,but if I hold the key for a couple seconds then it works was told to replace the keyboard and I did with a new one. But it is still doing it. Can anyone tell me what the problem is. Model # R4U machine type 2378, OS XP-PRO , COA SP2 , S/N L3xxxxx.
Message Edited by scottzilla on 12-15-2008 10:05 PM
Moderator Note; s/n edited for members own protection
Message Edited by andyP on 12-16-2008 07:57 AM

It's the Quick Selection Tool in Photoshop Elements 9 and I'm trying to get the background and make it another layer so I can even out the color of the background then bring down the transparency. Not sure if that makes sense. I'm new to this.... Sometimes the area it will grab can go ...not fast.. but not slow. Sometimes it's like it's just messed up and literally takes 30 seconds to process each move. I rebooted my computer and re opened it and it helped a little. It's not clear what causes it when it messes up and when it doesn't. Just frustrating. It's probably user error because I'm so new at Photoshop. Thanks for your input. I really appreciate it.

Scroll-bar STILL not working right in 10.6.1 update

The scroll-bar is STILL NOT working right in the 10.6.1 update. I am not able to click anywhere on the scroll-bar and have the navigation go there. I have to drag the blamed thing where ever I want it to go. This problem only exist with the recent iTunes 10.6.x updates.

I have the new MacBook Pro 2010, Dell 3007WFP. No mirroring problemsat that or higher res. I was chagrined, however, to find out that while my 2007 15" MacBook Pro had no problems driving the Dell 30", the 2010 17" requires the Dual Link cable for $100 extra. ;>(
But it works fine.
ak

Safari 5.1.2 Not working right after install

Hi, after installing the update for Snow Leopard safari is not working right. Some pages don't load, and other don't load correctly.
I have to keep hitting refresh two or three times. Also thunbnails are not displaying. Even the apple page comes up looking buggy.
Please help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in as yourself. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
In safe mode, test again. Same problem(s) now?
After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

Command key not working right in several applications

All of a sudden, some functions are not working right, i.e., in PhotoShop when I select the Zoom key I get a minus rather than the usual plus. In Date and Time, I started getting a 24 hour clock. If I go there in System Prefs and change to 24 hour clock, then the readout on my menu bar is for 12 hour clock. Sometimes when I use Command-Q the machine asks me if I want to close all programs rather than just the one I'm attempting to leave. What is wrong?

Hi n,
I have no idea if this might work, but I'd reset the PRAM and SMC.

LR2 to PS CS3 roundtrip not working right

I am sorry, but from where I am standing Adobe screwed up big.
In the first place, LR 2 is very slow on my MACPRO with 4 gigs, as slow as Aperture 1.5 was and was what made me switch from Aperture to Lightroom.
In the second place, PS roundtrip is not working right. LR2 sends the image to PS when I select edit in, but after I finish with the file in PS and close and save, the new file does not show up in LR 2. It is in the folder but not in the catalog. I either have to re-import the image or sync the folder. On either case, it is not stacked with the original.
What's up??
Is there a setting or something? or just a big screw up from Adobe? Why isn't Adobe addressing this issues in public?

I am having the same problem with lr2. Mine will not round trip. It goes to CS3 but will not come back when saved in CS3. Strange thing is, after having LR2 since day one of release it did round trip a few times yesterday but today it is back to its habit of no round trip.
At times LR2 is slow and the brush tool is mostly unusable since it is so slow. Also sliders are very sticky.
If the Adobe boys and girls can get it working soon LR2 is great and I feel it has increased my quality.
Bob Kuprion

TS1368 My Itunes match is not working right, it was only able to download 50% of my songs and now I can't play the balance songs.. it's so stupid

My Itunes match is not working right, it was only able to download 50% of my songs and now I can't play the balance songs.. it has messed up my enitre music library

Hello Carpathianna,
No judgment here on the music you listen to, I have that song too in my library. If iTunes is telling you that the song is missing and you purchased it from the iTunes Store, then just delete it from your iTunes library and then download your song again. Check out the articles below for more information.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Download past purchases
http://support.apple.com/kb/HT2519
Regards,
-Norm G.

I-trigue 3400 soundwoofer not working / right speaker low output compare with left speaker

Similar Messages

Maybe you are looking for