I-trigue 3600 subwoofer stopped working

One day when i turned on my computer I realised that sub doesnt work. I checked everything, volume (bass) control, but only speakers work. Do you have any idea whats going on and maybe I can do sth by myself with it ?

I have the same problem. One day I turned my computer on and the subwoofer failed to work, but my satellites are OK. A real pitty, because just a couple weeks out of warranty. Good speakers when they work, otherwise an awkward load for the trashman. I opened the thing up, thinking the warranty sucked anyway... and saw nothing apparent, everthing seemed connection alright and no burn marks or bad smells. It may be something more involved, so I am going to let this 40 Euro speak set go. *boohoo* and buy myself a boston acoustics set, which are better. I had a set that last 8 years and would have lasted more if I had taken them myself on a plane when I emigrated.
I suppose these days in electronics, it not worth sending it in for repair, chances you can buy a better system with the shipping, repair and tax you would pay to repair it, but if it lies in your heart, then thats your business. Otherwise these depreciative things, are not worth the time and sweat.
Here's to a speaker system that lasted only a year. *cheers*

Similar Messages

  • I-Trigue 3800 Remote stopped working..

    The remote in my i-trigue 3800 stopped working all of a sudden. I replaced the battery, and the volume worked for about 5 clicks, and again, it stopped working. Is there a replacement remote for these speakers or something else I should be aware of?
    thanks.

    I have the same problem. One day I turned my computer on and the subwoofer failed to work, but my satellites are OK. A real pitty, because just a couple weeks out of warranty. Good speakers when they work, otherwise an awkward load for the trashman. I opened the thing up, thinking the warranty sucked anyway... and saw nothing apparent, everthing seemed connection alright and no burn marks or bad smells. It may be something more involved, so I am going to let this 40 Euro speak set go. *boohoo* and buy myself a boston acoustics set, which are better. I had a set that last 8 years and would have lasted more if I had taken them myself on a plane when I emigrated.
    I suppose these days in electronics, it not worth sending it in for repair, chances you can buy a better system with the shipping, repair and tax you would pay to repair it, but if it lies in your heart, then thats your business. Otherwise these depreciative things, are not worth the time and sweat.
    Here's to a speaker system that lasted only a year. *cheers*

  • Logitech z640 Live 5.1 Subwoofer stopped work

    The title thread says it all pretty much. All of a sudden my subwoofer just stopped working. I have tried countless things (everything basic, driver un-installation, app un-installation etc...) and haven't fixed it. Any suggestions, im dieing here without my base!

    The same thing happened to me. It happened about 4 months ago. I tried to troubleshoot it tonight, but with no luck. The four speakers work OK. There is some light static, but the sub woofer is definitely not functioning. It will work for about two minutes and then thats it. Any ideas?

  • Subwoofer not working with THX cons

    Ok here's my problems,
    When I updated for the last drivers, my subwoofer stopped working when I calibrate my speaker. When I don't use this options, I can have a good sound. but when I turned in on I loose all my base. So when I play games, I don't have any loud sound on. It's becomming anoying. I've tried to uninstall and install it for 6 times, and have error from plvcore.plx or something like that, and got throught it. But now event if I uninstall physically the card. there's no way out I don't have any loudness when Calibrate the speaker.
    I ran a speaker test from the speaker options and it worked (I didn't use my computer that test)
    when I use my computer as soon as I have my calibrate settings I don't have my subwoofer working.
    It's not the EAX redirection 'cause I used it and didn't notice a change when I jplay Games (CS) only when I listen to music.
    I have a Audigy 2 zs Platinum with a Z-5500 from logitech

    I need help.. anyone got an Idea?

  • I-Trigue 3600 in combination with a stereo

    I want to connect my PC with an I-trigue 3600 system to my old stereo as an extra audio output (no input from the stereo system to the PC or 3600 required).
    I can connect the output to the 2 small creative speakers to the stereo: stereo works fine in combination with the subwoofer but then there is no connection towards the 2 small speakers (unless you use 2 splitters on the output)
    Is there an mare nicer solution than using 2 splitters on the creative outputs.
    is there any danger (possible damage) by connecting the stereo as an extra output device
    greetings

    Is your Sitecom:
    A wired or wireless router?
    Your main Internet router? That is, is it connected directly to a Broadband Internet modem by Ethernet?
    Configured as a router or a bridge?
    Is your Time Capsule (TC):
    Connected to the Sitecom router by wire or wireless?
    Configured as a router (default) or a bridge?

  • Sound stopped working

    Hi.
    It used to work.
    I have problem with sound. Yesterday It does work, but today it stopped working. I'm not sure if it is because of some updates, I haven't noticed anything connected to sound. The only difference is that I uninstalled mplayer2. Then it stopped working - but I'm not sure if it was because of this.
    I tried:
    reinstall alsa, alsa-plugins, alsa-utils, vlc, mplayer2
    install pulseaudio, oss (without configuration)
    reboot
    unmute all chanels in alsamixer
    connecting headphones
    aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default:CARD=PCH
    HDA Intel PCH, ALC269VC Analog
    Default Audio Device
    sysdefault:CARD=PCH
    HDA Intel PCH, ALC269VC Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    Front speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC269VC Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: ALC269VC Analog [ALC269VC Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    lspci|grep -i audio
    00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
    lsmod|grep '^snd'|column -t
    snd_hda_codec_hdmi 27857 1
    snd_hda_codec_realtek 62279 1
    snd_hda_intel 33946 0
    snd_hda_codec 101474 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6364 1 snd_hda_codec
    snd_pcm 76956 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7298 2 snd_pcm,snd_hda_intel
    snd_timer 18687 1 snd_pcm
    snd 58893 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    pacman -Q |egrep -wi --color 'vlc|audio|alsa|mplayer2|oss|pulse|sound'
    alsa-lib 1.0.27-1
    alsa-plug]alsa-lib 1.0.27-1
    alsa-plugins 1.0.27-1
    alsa-utils 1.0.27-4
    lib32-alsa-lib 1.0.27-1ins 1.0.27-1
    alsa-utils 1.0.27-4
    lib32-alsa-lib 1.0.27-1
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.8.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.0 20130411 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 17 10:57:28 CEST 2013
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=49f66c2c-5bd3-4843-bd24-714dc1c0d188 ro quiet
    [ 0.000000] Disabled fast string operations
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000019fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.6 present.
    [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 06XK 03/16/2012
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x19fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
    [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable
    [ 0.000000] 5 base 100000000 mask F80000000 write-back
    [ 0.000000] 6 base 180000000 mask FE0000000 write-back
    [ 0.000000] 7 base 19FE00000 mask FFFE00000 uncachable
    [ 0.000000] 8 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] reserving inaccessible SNB gfx pages
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaffffff]
    [ 0.000000] [mem 0x00000000-0xdaffffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xdaffffff @ [mem 0x1fffb000-0x1fffffff]
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x19fdfffff]
    [ 0.000000] [mem 0x100000000-0x19fdfffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0x19fdfffff @ [mem 0xd9c9b000-0xd9c9efff]
    [ 0.000000] RAMDISK: [mem 0x37a50000-0x37d1ffff]
    [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD)
    [ 0.000000] ACPI: XSDT 00000000daffe120 00084 (v01 SECCSD LH43STAR 00000002 PTEC 00000002)
    [ 0.000000] ACPI: FACP 00000000dafef000 000F4 (v03 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: DSDT 00000000daff2000 0803C (v02 SECCSD SNB-CPT 00000000 INTL 20061109)
    [ 0.000000] ACPI: FACS 00000000daf47000 00040
    [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001)
    [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109)
    [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
    [ 0.000000] ACPI: UEFI 00000000dafe7000 0022E (v01 SECCSD LH43STAR 00000002 PTL 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000019fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x19fdfffff]
    [ 0.000000] NODE_DATA [mem 0x19fdfb000-0x19fdfffff]
    [ 0.000000] [ffffea0000000000-ffffea00067fffff] PMD -> [ffff880199400000-ffff88019f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x19fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
    [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff]
    [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x19fdfffff]
    [ 0.000000] On node 0 totalpages: 1545773
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 141 pages reserved
    [ 0.000000] DMA zone: 3776 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 13859 pages used for memmap
    [ 0.000000] DMA32 zone: 873085 pages, LIFO batch:31
    [ 0.000000] Normal zone: 10232 pages used for memmap
    [ 0.000000] Normal zone: 644616 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
    [ 0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000
    [ 0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000
    [ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
    [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
    [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
    [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
    [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
    [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
    [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88019fa00000 s85184 r8192 d21312 u262144
    [ 0.000000] pcpu-alloc: s85184 r8192 d21312 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1521477
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=49f66c2c-5bd3-4843-bd24-714dc1c0d188 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 6002944k/6813696k available (4908k kernel code, 630604k absent, 180148k reserved, 4024k data, 820k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:4352 nr_irqs:744 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 25165824 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 1596.383 MHz processor
    [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3194.79 BogoMIPS (lpj=5321276)
    [ 0.000005] pid_max: default: 32768 minimum: 301
    [ 0.000038] Security Framework initialized
    [ 0.000045] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000630] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.002565] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.003415] Mount-cache hash table entries: 256
    [ 0.003607] Initializing cgroup subsys cpuacct
    [ 0.003609] Initializing cgroup subsys memory
    [ 0.003616] Initializing cgroup subsys devices
    [ 0.003618] Initializing cgroup subsys freezer
    [ 0.003620] Initializing cgroup subsys net_cls
    [ 0.003622] Initializing cgroup subsys blkio
    [ 0.003647] Disabled fast string operations
    [ 0.003649] CPU: Physical Processor ID: 0
    [ 0.003650] CPU: Processor Core ID: 0
    [ 0.003655] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.003658] mce: CPU supports 7 MCE banks
    [ 0.003671] CPU0: Thermal monitoring enabled (TM1)
    [ 0.003677] process: using mwait in idle threads
    [ 0.003681] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    tlb_flushall_shift: 5
    [ 0.003835] Freeing SMP alternatives: 20k freed
    [ 0.004849] ACPI: Core revision 20121018
    [ 0.011331] ftrace: allocating 19310 entries in 76 pages
    [ 0.022372] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.055356] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.055365] TSC deadline timer enabled
    [ 0.055369] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
    [ 0.055376] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.055378] ... version: 3
    [ 0.055379] ... bit width: 48
    [ 0.055380] ... generic registers: 4
    [ 0.055381] ... value mask: 0000ffffffffffff
    [ 0.055382] ... max period: 000000007fffffff
    [ 0.055383] ... fixed-purpose events: 3
    [ 0.055384] ... event mask: 000000070000000f
    [ 0.093170] Disabled fast string operations
    [ 0.095374] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.113177] Disabled fast string operations
    [ 0.126599] Disabled fast string operations
    [ 0.082145] smpboot: Booting Node 0, Processors #1 #2 #3
    [ 0.128712] Brought up 4 CPUs
    [ 0.128716] smpboot: Total of 4 processors activated (12776.19 BogoMIPS)
    [ 0.132574] devtmpfs: initialized
    [ 0.133773] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes)
    [ 0.134524] RTC time: 14:38:00, date: 04/23/13
    [ 0.134565] NET: Registered protocol family 16
    [ 0.134701] ACPI: bus type pci registered
    [ 0.134776] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.134779] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.142122] PCI: Using configuration type 1 for base access
    [ 0.142308] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.142309] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.142310] mtrr: corrected configuration.
    [ 0.142733] bio: create slab <bio-0> at 0
    [ 0.142794] ACPI: Added _OSI(Module Device)
    [ 0.142795] ACPI: Added _OSI(Processor Device)
    [ 0.142797] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.142798] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.144238] ACPI: EC: Look up EC in DSDT
    [ 0.145725] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.148149] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.149385] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.149747] ACPI: Dynamic OEM Table Load:
    [ 0.149750] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
    [ 0.150021] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.150411] ACPI: Dynamic OEM Table Load:
    [ 0.150414] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
    [ 0.150533] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.150890] ACPI: Dynamic OEM Table Load:
    [ 0.150892] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
    [ 0.152416] ACPI: Interpreter enabled
    [ 0.152421] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.152442] ACPI: Using IOAPIC for interrupt routing
    [ 0.159354] ACPI: Power Resource [FN00] (off)
    [ 0.159432] ACPI: Power Resource [FN01] (off)
    [ 0.159506] ACPI: Power Resource [FN02] (off)
    [ 0.159581] ACPI: Power Resource [FN03] (off)
    [ 0.159654] ACPI: Power Resource [FN04] (off)
    [ 0.159950] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.160074] ACPI: No dock devices found.
    [ 0.160078] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.160290] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.160292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.160531] \_SB_.PCI0:_OSC invalid UUID
    [ 0.160532] _OSC request data:1 8 1f
    [ 0.160943] PCI host bridge to bus 0000:00
    [ 0.160946] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.160949] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.160951] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.160952] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.160954] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
    [ 0.160956] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
    [ 0.160965] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [ 0.161009] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
    [ 0.161021] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
    [ 0.161028] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.161033] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f]
    [ 0.161093] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 0.161118] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit]
    [ 0.161201] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.161240] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 0.161264] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff]
    [ 0.161361] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.161391] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 0.161408] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit]
    [ 0.161483] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.161509] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 0.161596] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.161628] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
    [ 0.161714] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.161746] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
    [ 0.161876] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.161921] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 0.161945] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff]
    [ 0.162042] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.162072] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
    [ 0.162207] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
    [ 0.162228] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f]
    [ 0.162236] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097]
    [ 0.162245] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087]
    [ 0.162254] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093]
    [ 0.162263] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f]
    [ 0.162272] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff]
    [ 0.162324] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.162346] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 0.162363] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit]
    [ 0.162392] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
    [ 0.162635] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000
    [ 0.162815] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit]
    [ 0.163511] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 0.169202] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.169209] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
    [ 0.169339] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.169408] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
    [ 0.169530] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref]
    [ 0.169605] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref]
    [ 0.169935] pci 0000:02:00.0: supports D1 D2
    [ 0.169937] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.175788] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.175797] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.175816] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
    [ 0.175957] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
    [ 0.175995] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit]
    [ 0.176190] pci 0000:03:00.0: PME# supported from D3hot D3cold
    [ 0.182448] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.182462] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.182529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.182568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    [ 0.182598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.182726] \_SB_.PCI0:_OSC invalid UUID
    [ 0.182727] _OSC request data:1 1f 1f
    [ 0.182731] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.182732] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.183395] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.183442] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.183487] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.183530] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [ 0.183573] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
    [ 0.183616] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.183662] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [ 0.183709] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9
    [ 0.183797] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.183801] vgaarb: loaded
    [ 0.183802] vgaarb: bridge control possible 0000:00:02.0
    [ 0.183834] PCI: Using ACPI for IRQ routing
    [ 0.185498] PCI: pci_cache_line_size set to 64 bytes
    [ 0.185611] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.185613] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff]
    [ 0.185615] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
    [ 0.185616] e820: reserve RAM buffer [mem 0x19fe00000-0x19fffffff]
    [ 0.185709] NetLabel: Initializing
    [ 0.185711] NetLabel: domain hash size = 128
    [ 0.185712] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.185729] NetLabel: unlabeled traffic allowed by default
    [ 0.185745] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.185750] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.187760] Switching to clocksource hpet
    [ 0.192350] pnp: PnP ACPI init
    [ 0.192366] ACPI: bus type pnp registered
    [ 0.192633] pnp 00:00: [dma 4]
    [ 0.192731] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.192753] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.192844] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.192878] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.192924] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.192927] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.192929] system 00:04: [io 0x5000-0x5003] has been reserved
    [ 0.192931] system 00:04: [io 0xffff] has been reserved
    [ 0.192932] system 00:04: [io 0x0400-0x0453] has been reserved
    [ 0.192938] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.192940] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.192942] system 00:04: [io 0x0a00-0x0a0f] has been reserved
    [ 0.192944] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.192946] system 00:04: [io 0x5000-0x500f] could not be reserved
    [ 0.192949] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.192975] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.193023] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.193027] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.193068] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.193112] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
    [ 0.193267] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.193270] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.193272] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.193274] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.193276] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.193278] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.193280] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.193282] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.193284] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 0.193286] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.193288] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.193629] ACPI Error: Invalid/unsupported resource descriptor: Type 0x00 (20121018/utresrc-650)
    [ 0.193634] pnp 00:0a: can't evaluate _CRS: 12311
    [ 0.193738] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.193762] pnp: PnP ACPI: found 11 devices
    [ 0.193764] ACPI: ACPI bus type pnp unregistered
    [ 0.200460] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.200467] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff]
    [ 0.200477] pci 0000:00:1c.3: PCI bridge to [bus 02]
    [ 0.200481] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
    [ 0.200489] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
    [ 0.200497] pci 0000:00:1c.4: PCI bridge to [bus 03]
    [ 0.200503] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.200541] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.200543] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.200545] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.200546] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
    [ 0.200548] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
    [ 0.200550] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff]
    [ 0.200552] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.200554] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
    [ 0.200556] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff]
    [ 0.200587] NET: Registered protocol family 2
    [ 0.200783] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.201021] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.201188] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.201218] TCP: reno registered
    [ 0.201232] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.201269] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.201357] NET: Registered protocol family 1
    [ 0.201372] pci 0000:00:02.0: Boot video device
    [ 0.201548] PCI: CLS 64 bytes, default 64
    [ 0.201591] Unpacking initramfs...
    [ 0.261406] Freeing initrd memory: 2880k freed
    [ 0.261899] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.261905] software IO TLB [mem 0xd5c9b000-0xd9c9b000] (64MB) mapped at [ffff8800d5c9b000-ffff8800d9c9afff]
    [ 0.262304] audit: initializing netlink socket (disabled)
    [ 0.262319] type=2000 audit(1366727880.259:1): initialized
    [ 0.276840] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.278407] VFS: Disk quotas dquot_6.5.2
    [ 0.278450] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.278614] msgmni has been set to 11730
    [ 0.278836] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.278888] io scheduler noop registered
    [ 0.278891] io scheduler deadline registered
    [ 0.278897] io scheduler cfq registered (default)
    [ 0.279146] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.279147] vesafb: scrolling: redraw
    [ 0.279149] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.279531] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 3072k, total 3072k
    [ 0.344149] Console: switching to colour frame buffer device 128x48
    [ 0.408701] fb0: VESA VGA frame buffer device
    [ 0.408712] intel_idle: MWAIT substates: 0x21120
    [ 0.408714] intel_idle: v0.4 model 0x2A
    [ 0.408715] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.408750] GHES: HEST is not enabled!
    [ 0.408800] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.409237] Linux agpgart interface v0.103
    [ 0.409304] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12
    [ 0.416404] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.416417] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.416540] mousedev: PS/2 mouse device common for all mice
    [ 0.416900] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.416930] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.417022] cpuidle: using governor ladder
    [ 0.417127] cpuidle: using governor menu
    [ 0.417129] EFI Variables Facility v0.08 2004-May-17
    [ 0.417180] drop_monitor: Initializing network drop monitor service
    [ 0.417252] TCP: cubic registered
    [ 0.417348] NET: Registered protocol family 10
    [ 0.417495] NET: Registered protocol family 17
    [ 0.417505] Key type dns_resolver registered
    [ 0.417796] PM: Hibernation image not present or could not be loaded.
    [ 0.417805] registered taskstats version 1
    [ 0.418395] Magic number: 9:780:637
    [ 0.418468] rtc_cmos 00:05: setting system clock to 2013-04-23 14:38:01 UTC (1366727881)
    [ 0.420125] Freeing unused kernel memory: 820k freed
    [ 0.420254] Write protecting the kernel read-only data: 8192k
    [ 0.423156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.424428] Freeing unused kernel memory: 1224k freed
    [ 0.425960] Freeing unused kernel memory: 440k freed
    [ 0.433142] systemd-udevd[57]: starting version 201
    [ 0.458283] ACPI: bus type usb registered
    [ 0.458349] usbcore: registered new interface driver usbfs
    [ 0.458370] usbcore: registered new interface driver hub
    [ 0.458506] usbcore: registered new device driver usb
    [ 0.458848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.458984] ehci-pci: EHCI PCI platform driver
    [ 0.459037] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 0.459041] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.459047] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.459062] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.462962] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.462983] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000
    [ 0.463303] SCSI subsystem initialized
    [ 0.464366] ACPI: bus type scsi registered
    [ 0.464443] libata version 3.00 loaded.
    [ 0.464501] xhci_hcd 0000:03:00.0: xHCI Host Controller
    [ 0.464512] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
    [ 0.470946] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.471264] hub 1-0:1.0: USB hub found
    [ 0.471272] hub 1-0:1.0: 2 ports detected
    [ 0.471541] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 0.471545] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.471551] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 0.471576] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.475501] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.475524] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000
    [ 0.484257] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.484616] hub 3-0:1.0: USB hub found
    [ 0.484625] hub 3-0:1.0: 2 ports detected
    [ 0.484916] ahci 0000:00:1f.2: version 3.0
    [ 0.485018] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
    [ 0.485078] ahci: SSS flag set, parallel bus scan disabled
    [ 0.485142] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x19 impl SATA mode
    [ 0.485145] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
    [ 0.485152] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.498266] scsi0 : ahci
    [ 0.498400] scsi1 : ahci
    [ 0.498501] scsi2 : ahci
    [ 0.498607] scsi3 : ahci
    [ 0.498716] scsi4 : ahci
    [ 0.498823] scsi5 : ahci
    [ 0.498879] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 40
    [ 0.498883] ata2: DUMMY
    [ 0.498885] ata3: DUMMY
    [ 0.498888] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 40
    [ 0.498891] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 40
    [ 0.498893] ata6: DUMMY
    [ 0.527671] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X
    [ 0.527678] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X
    [ 0.527683] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 0.527688] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 0.527693] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
    [ 0.527949] xHCI xhci_add_endpoint called for root hub
    [ 0.527951] xHCI xhci_check_bandwidth called for root hub
    [ 0.527980] hub 2-0:1.0: USB hub found
    [ 0.527988] hub 2-0:1.0: 2 ports detected
    [ 0.528084] xhci_hcd 0000:03:00.0: xHCI Host Controller
    [ 0.528088] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
    [ 0.528278] xHCI xhci_add_endpoint called for root hub
    [ 0.528282] xHCI xhci_check_bandwidth called for root hub
    [ 0.528325] hub 4-0:1.0: USB hub found
    [ 0.528336] hub 4-0:1.0: 2 ports detected
    [ 0.777504] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.817457] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.818156] ata1.00: ATA-9: SAMSUNG MZ7PC128HAFU-000, CXM02K1Q, max UDMA/133
    [ 0.818173] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.818687] ata1.00: configured for UDMA/133
    [ 0.818930] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7PC128 CXM0 PQ: 0 ANSI: 5
    [ 0.901417] hub 1-1:1.0: USB hub found
    [ 0.901487] hub 1-1:1.0: 6 ports detected
    [ 1.007327] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 1.131530] hub 3-1:1.0: USB hub found
    [ 1.131707] hub 3-1:1.0: 6 ports detected
    [ 1.137166] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.210698] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
    [ 1.263792] tsc: Refined TSC clocksource calibration: 1596.373 MHz
    [ 1.263808] Switching to clocksource tsc
    [ 1.456959] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.460046] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
    [ 1.460135] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.460139] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.460170] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.461145] sda: sda1 sda2 sda3 sda4 < sda5 >
    [ 1.461569] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.668989] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.706891] usb 3-1.5: new full-speed USB device number 3 using ehci-pci
    [ 1.790244] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 1.791051] systemd[1]: Set hostname to <530uarch>.
    [ 1.859141] systemd[1]: Cannot add dependency job for unit ntpd.service, ignoring: Unit ntpd.service failed to load: No such file or directory. See system logs and 'systemctl status ntpd.service' for details.
    [ 1.859155] systemd[1]: Cannot add dependency job for unit laptop-mode.service, ignoring: Unit laptop-mode.service failed to load: No such file or directory. See system logs and 'systemctl status laptop-mode.service' for details.
    [ 1.859170] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 1.859349] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 1.859395] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 1.859406] systemd[1]: Starting Remote File Systems.
    [ 1.859417] systemd[1]: Reached target Remote File Systems.
    [ 1.859425] systemd[1]: Expecting device sys-subsystem-net-devices-wlp1s0.device...
    [ 1.859434] systemd[1]: Starting Delayed Shutdown Socket.
    [ 1.859461] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 1.859468] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 1.859487] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 1.859494] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 1.859516] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 1.859524] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 1.859547] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 1.859558] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 1.859587] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 1.859595] systemd[1]: Starting Paths.
    [ 1.859603] systemd[1]: Reached target Paths.
    [ 1.859626] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 1.859714] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 1.859722] systemd[1]: Starting Encrypted Volumes.
    [ 1.859731] systemd[1]: Reached target Encrypted Volumes.
    [ 1.859784] systemd[1]: Starting udev Kernel Socket.
    [ 1.859803] systemd[1]: Listening on udev Kernel Socket.
    [ 1.859845] systemd[1]: Starting udev Control Socket.
    [ 1.859868] systemd[1]: Listening on udev Control Socket.
    [ 1.859877] systemd[1]: Starting Journal Socket.
    [ 1.859912] systemd[1]: Listening on Journal Socket.
    [ 1.859945] systemd[1]: Mounting Huge Pages File System...
    [ 1.893494] systemd[1]: Mounting POSIX Message Queue File System...
    [ 1.898344] systemd[1]: Started Load Kernel Modules.
    [ 1.898365] systemd[1]: Mounted FUSE Control File System.
    [ 1.899753] systemd[1]: Starting Apply Kernel Variables...
    [ 1.923663] systemd[1]: Mounting Configuration File System...
    [ 1.930086] systemd[1]: Starting udev Coldplug all Devices...
    [ 1.936854] systemd[1]: Starting Journal Service...
    [ 1.950121] systemd[1]: Started Journal Service.
    [ 1.950178] systemd[1]: Starting Setup Virtual Console...
    [ 1.960089] systemd[1]: Starting Create static device nodes in /dev...
    [ 1.967386] systemd[1]: Started Set Up Additional Binary Formats.
    [ 1.967414] systemd[1]: Mounting Debug File System...
    [ 1.976595] systemd[1]: Starting Swap.
    [ 1.976618] systemd[1]: Reached target Swap.
    [ 1.976647] systemd[1]: Mounting Temporary Directory...
    [ 2.023332] systemd[1]: Started File System Check on Root Device.
    [ 2.023347] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 2.060070] systemd[1]: Expecting device dev-disk-by\x2duuid-1166c42d\x2dd01a\x2d40bf\x2d8926\x2d2795b3f0b834.device...
    [ 2.060097] systemd[1]: Expecting device dev-disk-by\x2duuid-C332\x2d535C.device...
    [ 2.060597] systemd[1]: Mounted Huge Pages File System.
    [ 2.060732] systemd[1]: Mounted POSIX Message Queue File System.
    [ 2.062885] EXT4-fs (sda1): re-mounted. Opts: commit=15,data=ordered,discard
    [ 2.079953] systemd[1]: Started Apply Kernel Variables.
    [ 2.080081] systemd[1]: Mounted Configuration File System.
    [ 2.091845] systemd[1]: Started Setup Virtual Console.
    [ 2.093312] systemd[1]: Started Create static device nodes in /dev.
    [ 2.093419] systemd[1]: Mounted Debug File System.
    [ 2.093493] systemd[1]: Mounted Temporary Directory.
    [ 2.093753] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 2.106639] systemd[1]: Started udev Coldplug all Devices.
    [ 2.106691] systemd[1]: Starting Load Random Seed...
    [ 2.113536] systemd[1]: Starting udev Kernel Device Manager...
    [ 2.119903] systemd[1]: Started Load Random Seed.
    [ 2.122479] systemd-udevd[142]: starting version 202
    [ 2.126885] systemd[1]: Started udev Kernel Device Manager.
    [ 2.126941] systemd[1]: Starting Local File Systems (Pre).
    [ 2.126955] systemd[1]: Reached target Local File Systems (Pre).
    [ 2.182697] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
    [ 2.182707] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.182713] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
    [ 2.182718] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.182720] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
    [ 2.182724] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.182726] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
    [ 2.182731] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.182733] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 2.183607] ACPI: AC Adapter [ADP1] (on-line)
    [ 2.184967] ACPI: Requesting acpi_cpufreq
    [ 2.187346] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    [ 2.187393] ACPI: Lid Switch [LID0]
    [ 2.187480] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 2.187487] ACPI: Power Button [PWRB]
    [ 2.190425] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 2.190433] ACPI: Power Button [PWRF]
    [ 2.191578] mei 0000:00:16.0: setting latency timer to 64
    [ 2.191674] mei 0000:00:16.0: irq 46 for MSI/MSI-X
    [ 2.198369] [drm] Initialized drm 1.1.0 20060810
    [ 2.198487] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20121018/utaddress-251)
    [ 2.198496] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 2.207287] ACPI: Battery Slot [BAT1] (battery present)
    [ 2.210635] ACPI: Fan [FAN0] (off)
    [ 2.210696] ACPI: Fan [FAN1] (off)
    [ 2.210754] ACPI: Fan [FAN2] (off)
    [ 2.210806] ACPI: Fan [FAN3] (off)
    [ 2.210877] ACPI: Fan [FAN4] (off)
    [ 2.211218] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [ 2.213278] thermal LNXTHERM:00: registered as thermal_zone0
    [ 2.213283] ACPI: Thermal Zone [TZ00] (61 C)
    [ 2.214137] thermal LNXTHERM:01: registered as thermal_zone1
    [ 2.214139] ACPI: Thermal Zone [TZ01] (30 C)
    [ 2.231486] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 2.231742] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
    [ 2.236625] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 2.236988] r8169 0000:02:00.0: irq 48 for MSI/MSI-X
    [ 2.237512] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004ef8000, e8:03:9a:97:b5:a7, XID 0c900800 IRQ 48
    [ 2.237516] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 2.254854] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.258073] samsung_laptop: detected SABI interface: SwSmi@
    [ 2.258077] samsung_laptop: Backlight controlled by ACPI video driver
    [ 2.271599] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 2.271604] Copyright(c) 2003-2012 Intel Corporation
    [ 2.272199] iwlwifi 0000:01:00.0: irq 49 for MSI/MSI-X
    [ 2.273865] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 2.274238] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 2.274354] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 2.276284] systemd[1]: Found device SAMSUNG_MZ7PC128HAFU-000.
    [ 2.276358] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1
    [ 2.276360] systemd[1]: Starting File System Check on /dev/disk/by-uuid/1166c42d-d01a-40bf-8926-2795b3f0b834...
    [ 2.277330] [drm] Memory usable by graphics device = 2048M
    [ 2.277337] checking generic (e0000000 300000) vs hw (e0000000 10000000)
    [ 2.277340] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 2.277356] Console: switching to colour dummy device 80x25
    [ 2.277856] i915 0000:00:02.0: setting latency timer to 64
    [ 2.293728] iTCO_vendor_support: vendor-support=0
    [ 2.294474] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 2.295948] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 2.296080] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 2.296784] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [ 2.296789] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
    [ 2.296792] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [ 2.296794] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
    [ 2.296797] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled
    [ 2.296800] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
    [ 2.297034] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
    [ 2.309676] systemd[1]: Found device SAMSUNG_MZ7PC128HAFU-000.
    [ 2.309725] systemd[1]: Mounting /mnt/shard...
    [ 2.315045] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
    [ 2.326398] i915 0000:00:02.0: irq 50 for MSI/MSI-X
    [ 2.326694] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 2.326697] [drm] Driver supports precise vblank timestamp query.
    [ 2.326780] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 2.329470] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 2.335638] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
    [ 2.339306] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
    [ 2.339922] systemd[1]: Starting Sound Card.
    [ 2.339944] systemd[1]: Reached target Sound Card.
    [ 2.344210] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 2.353017] systemd-udevd[151]: renamed network interface eth0 to enp2s0
    [ 2.356365] systemd-udevd[152]: renamed network interface wlan0 to wlp1s0
    [ 2.359280] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [ 2.403861] fbcon: inteldrmfb (fb0) is primary device
    [ 2.412172] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: commit=15,data=ordered,discard
    [ 2.523824] usb 3-1.5: USB disconnect, device number 3
    [ 2.608485] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
    [ 2.615267] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
    [ 2.885607] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
    [ 2.900591] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c.
    [ 2.975438] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
    [ 3.013202] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
    [ 3.020042] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
    [ 3.252446] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
    [ 3.415660] Console: switching to colour frame buffer device 170x48
    [ 3.424244] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 3.424247] i915 0000:00:02.0: registered panic notifier
    [ 3.436609] acpi device:32: registered as cooling_device9
    [ 3.436968] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 3.437019] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
    [ 3.437169] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 3.496648] Non-volatile memory driver v1.3
    [ 3.963276] Bluetooth: Core ver 2.16
    [ 3.963296] NET: Registered protocol family 31
    [ 3.963298] Bluetooth: HCI device and connection manager initialized
    [ 3.963305] Bluetooth: HCI socket layer initialized
    [ 3.963307] Bluetooth: L2CAP socket layer initialized
    [ 3.963313] Bluetooth: SCO socket layer initialized
    [ 3.964708] usbcore: registered new interface driver btusb
    [ 4.338375] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 4.468607] media: Linux media interface: v0.10
    [ 4.471891] Linux video capture interface: v2.00
    [ 4.518478] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018)
    [ 4.537926] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10
    [ 4.538078] usbcore: registered new interface driver uvcvideo
    [ 4.538083] USB Video Class driver (1.1.1)
    [ 6.473768] wlp1s0: authenticate with 00:24:8c:eb:ff:66
    [ 6.480100] wlp1s0: send auth to 00:24:8c:eb:ff:66 (try 1/3)
    [ 6.482750] wlp1s0: authenticated
    [ 6.483074] iwlwifi 0000:01:00.0 wlp1s0: disabling HT as WMM/QoS is not supported by the AP
    [ 6.483084] iwlwifi 0000:01:00.0 wlp1s0: disabling VHT as WMM/QoS is not supported by the AP
    [ 6.483367] wlp1s0: associate with 00:24:8c:eb:ff:66 (try 1/3)
    [ 6.486701] wlp1s0: RX AssocResp from 00:24:8c:eb:ff:66 (capab=0x431 status=0 aid=2)
    [ 6.496708] wlp1s0: associated
    [ 6.496833] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
    [ 6.534112] wlp1s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 00:24:8c:eb:ff:66
    [ 776.460690] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 776.473529] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 969.874854] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 969.887746] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 1061.757868] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 1061.790334] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 1346.112078] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 1346.143576] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 2241.768058] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 2241.780927] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    [ 2341.444767] psmouse serio1: Touchpad at isa0060/serio1/input0 lost sync at byte 6
    [ 2341.479230] psmouse serio1: Touchpad at isa0060/serio1/input0 - driver resynced.
    cat /etc/asound.conf (which was working)
    defaults.pcm.card 0
    defaults.pcm.device 0
    defaults.ctl.card 0
    Trying to play a file:
    mplayer Music/Arctic\ Monkeys/Favourite\ Most\ Nightmare/02-arctic_monkeys-teddy_picker-mst.mp3
    MPlayer2 UNKNOWN (C) 2000-2012 MPlayer Team
    [ass] FcFreeTypeQueryFace failed
    Cannot open file '/home/dan/.mplayer/input.conf': No such file or directory
    Failed to open /home/dan/.mplayer/input.conf.
    Can't open joystick device /dev/input/js0: No such file or directory
    Can't init input joystick
    Playing Music/Arctic Monkeys/Favourite Most Nightmare/02-arctic_monkeys-teddy_picker-mst.mp3.
    Detected file format: MP2/3 (MPEG audio layer 2/3) (libavformat)
    [mp3 @ 0x7f7b7e07d760]max_analyze_duration 5000000 reached at 5015510 microseconds
    [lavf] stream 0: audio (mp3), -aid 0
    Clip info:
    title: teddy picker
    artist: Arctic Monkeys
    album: Favourite Worst Nightmare
    track: 2
    language: German
    genre: Rock
    encoded_by: LAME 3.97
    date: 2007
    Load subtitles in Music/Arctic Monkeys/Favourite Most Nightmare/
    Selected audio codec: MPEG 1.0/2.0/2.5 layers I, II, III [mpg123]
    AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
    AO: [pulse] Init failed: Connection refused
    AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
    Video: no video
    Starting playback...
    A: 1.9 (01.8) of 163.2 (02:43.1) 1.6%
    aplay -D plughw:0,0 /usr/share/sounds/alsa/Front_Center.wav
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    speaker-test -c 2
    speaker-test 1.0.27
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 2 channels
    Using 16 octaves of pink noise
    Rate set to 48000Hz (requested 48000Hz)
    Buffer size range from 2048 to 16384
    Period size range from 1024 to 1024
    Using max buffer size 16384
    Periods = 4
    was set period_size = 1024
    was set buffer_size = 16384
    0 - Front Left
    1 - Front Right
    Time per period = 5.651455
    Last edited by Kotrfa (2013-04-23 15:32:42)

    Same for me after system upgrade on 2013-05-01:
    pacmatic -Syu
    Since then, no Audio output via HDMI anymore. Mainboard is Intel DH67BL.
    Before upgrade, it worked. Audio via normal audio connector also still works.
    $ aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
    Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
    But on the connected (via HDMI) TV is nothing to hear. Video on TV via HDMI works. Checked also alsamixer volume setting.
    With this, I hear the sound on the speakers connected with the Mainboard:
    $ aplay /usr/share/sounds/alsa/Front_Center.wav
    Wiedergabe: WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate: 48000 Hz, mono
    $ aplay -l
    **** Liste der Hardware-Geräte (PLAYBACK) ****
    Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC892 Analog [ALC892 Analog]
    Sub-Geräte: 1/1
    Sub-Gerät #0: subdevice #0
    Karte 0: PCH [HDA Intel PCH], Gerät 1: ALC892 Digital [ALC892 Digital]
    Sub-Geräte: 1/1
    Sub-Gerät #0: subdevice #0
    Karte 0: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [HDMI 0]
    Sub-Geräte: 1/1
    Sub-Gerät #0: subdevice #0
    $ lsmod | grep snd
    snd_hda_codec_hdmi 24877 1
    snd_hda_codec_realtek 53315 1
    snd_hda_intel 28850 1
    snd_hda_codec 87310 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 4746 1 snd_hda_codec
    snd_pcm 62851 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 6038 2 snd_pcm,snd_hda_intel
    snd_timer 14846 1 snd_pcm
    snd 44486 9 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 4386 1 snd
    $ cat /proc/asound/modules
    0 snd_hda_intel
    I've read this, but did not help:
    https://wiki.archlinux.org/index.php/Ta … chitecture
    Here the list of upgraded packages:
    grep 2013-05-01.*pgraded /var/log/pacman.log
    http://pastebin.com/vXjp3Bw4
    I also downgraded to the kernel version before upgrade:
    pacman -U /var/cache/pacman/pkg/linux-3.7.4-1-i686.pkg.tar.xz
    But that did not solve the problem. Also using linux-lts kernel did not help.
    I have posted this also on the german Arch Linux board:
    https://bbs.archlinux.de/viewtopic.php?id=23955
    Last edited by 1970 (2013-05-06 05:23:59)

  • Apulse skype - microphone stops working.

    HI !
    I use apuls for calls on Skype.
    I have an usb webcam:
    user0@homelinux ~]$ lsusb
    Bus 001 Device 004: ID 041e:4071 Creative Technology, Ltd
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    [user0@homelinux ~]$
    If during a call on Skype to enable video, after a few seconds the microphone stops working.
    my asoundrc:
    [user0@homelinux ~]$ cat ~/.asoundrc
    pcm.usb
        type hw
        card Ultra
    pcm.!default
        type asym
        playback.pcm
            type plug
            slave.pcm "dmix"
        capture.pcm
            type plug
            slave.pcm "usb"
    [user0@homelinux ~]$
    can anyone help?

    I have the same problem: microphone of webcam doesn't works on "apulse skype".
    my ,asoundrc :
    pcm.usb
    type hw
    card camera
    pcm.!default
    type asym
    playback.pcm
    type plug
    slave.pcm "dmix"
    capture.pcm
    type plug
    slave.pcm "usb"
    $ arecord -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    sysdefault:CARD=VT82xx
    HDA VIA VT82xx, ALC883 Analog
    Default Audio Device
    front:CARD=VT82xx,DEV=0
    HDA VIA VT82xx, ALC883 Analog
    Front speakers
    surround21:CARD=VT82xx,DEV=0
    HDA VIA VT82xx, ALC883 Analog
    2.1 Surround output to Front and Subwoofer speakers
    surround40:CARD=VT82xx,DEV=0
    HDA VIA VT82xx, ALC883 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=VT82xx,DEV=0
    HDA VIA VT82xx, ALC883 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=VT82xx,DEV=0
    HDA VIA VT82xx, ALC883 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=VT82xx,DEV=0
    HDA VIA VT82xx, ALC883 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=VT82xx,DEV=0
    HDA VIA VT82xx, ALC883 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    sysdefault:CARD=camera
    USB camera, USB Audio
    Default Audio Device
    front:CARD=camera,DEV=0
    USB camera, USB Audio
    Front speakers
    surround21:CARD=camera,DEV=0
    USB camera, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
    surround40:CARD=camera,DEV=0
    USB camera, USB Audio
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=camera,DEV=0
    USB camera, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=camera,DEV=0
    USB camera, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=camera,DEV=0
    USB camera, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=camera,DEV=0
    USB camera, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=camera,DEV=0
    USB camera, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
    $ cat /proc/asound/cards
    0 [VT82xx ]: HDA-Intel - HDA VIA VT82xx
    HDA VIA VT82xx at 0xc7ffc000 irq 17
    2 [camera ]: USB-Audio - USB camera
    USB camera at usb-0000:00:10.0-1, full speed
    Last edited by quellen (2014-10-15 18:18:39)

  • Netweaver 2004s Trial Stopped Working

    My SAP server has stopped working a while back and I have no idea where to even look...
    I use the SAP Management Console on windows XP SP2 with MaxDB as the database. When I try to start the server, all the processes start and then work+disp.exe dies.
    See traces and logs below... Are there any other traces or logs I should be looking at to find the cause?
    Here is the developer trace for disp+work.exe:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        NSP
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    23
    intno      20050900
    make:      multithreaded, ASCII
    pid        4280
    Thu Jun 19 11:30:45 2008
    kernel runs with dp version 202(ext=109) (@(#) DPLIB-INT-VERSION-202)
    length of sys_adm_ext is 360 bytes
    *** SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 4280) [dpxxdisp.c   1226]
         shared lib "dw_xml.dll" version 23 successfully loaded
         shared lib "dw_xtc.dll" version 23 successfully loaded
         shared lib "dw_stl.dll" version 23 successfully loaded
         shared lib "dw_gui.dll" version 23 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Thu Jun 19 11:30:56 2008
    *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 10 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5209]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpShMCreate: sizeof(wp_adm)          5280     (880)
    DpShMCreate: sizeof(tm_adm)          3351072     (16672)
    DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
    DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1076)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 04C80040, size: 3950264)
    DpShMCreate: allocated sys_adm at 04C80040
    DpShMCreate: allocated wp_adm at 04C81978
    DpShMCreate: allocated tm_adm_list at 04C82E18
    DpShMCreate: allocated tm_adm at 04C82E48
    DpShMCreate: allocated wp_ca_adm at 04FB5068
    DpShMCreate: allocated appc_ca_adm at 04FB5518
    DpShMCreate: allocated comm_adm at 04FB59C8
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 05036878
    DpShMCreate: allocated gw_adm at 050368B8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 050368E8
    DpShMCreate: allocated wall_adm at 050368F0
    MBUF state OFF
    *** ERROR => ztta/diag_area is 64000. [sapinit.c    325]
    *** ERROR => ztta/diag_area adjusted to 128000 (minimum value). [sapinit.c    327]
    *** ERROR => ztta/cua_area is 90000. [sapinit.c    963]
    *** ERROR => ztta/cua_area adjusted to 250000. [sapinit.c    967]
    EmInit: MmSetImplementation( 2 ).
    MM diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    Thu Jun 19 11:30:57 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( PackardBell) [dpxxdisp.c   11163]
    Thu Jun 19 11:30:58 2008
    CCMS: alert/MONI_SEGM_SIZE = 0   monitoring and alerting switched off.
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 23
    Release check o.K.
    Thu Jun 19 11:31:38 2008
    *** ERROR => W0 (pid 4316) died [dpxxdisp.c   13743]
    *** ERROR => W1 (pid 956) died [dpxxdisp.c   13743]
    my types changed after wp death/restart 0x9f --> 0x9e
    *** ERROR => W2 (pid 3692) died [dpxxdisp.c   13743]
    my types changed after wp death/restart 0x9e --> 0x9c
    *** ERROR => W3 (pid 3308) died [dpxxdisp.c   13743]
    my types changed after wp death/restart 0x9c --> 0x98
    *** ERROR => W4 (pid 4728) died [dpxxdisp.c   13743]
    my types changed after wp death/restart 0x98 --> 0x90
    *** ERROR => W5 (pid 3388) died [dpxxdisp.c   13743]
    my types changed after wp death/restart 0x90 --> 0x80
    *** DP_FATAL_ERROR => DpWPCheck: no more work processes
    *** DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-4316 (SIGUSR2)
    *** ERROR => DpWpKill(4316, SIGUSR2) failed [dpxxtool.c   2656]
    killing W1-956 (SIGUSR2)
    *** ERROR => DpWpKill(956, SIGUSR2) failed [dpxxtool.c   2656]
    killing W2-3692 (SIGUSR2)
    *** ERROR => DpWpKill(3692, SIGUSR2) failed [dpxxtool.c   2656]
    killing W3-3308 (SIGUSR2)
    *** ERROR => DpWpKill(3308, SIGUSR2) failed [dpxxtool.c   2656]
    killing W4-4728 (SIGUSR2)
    *** ERROR => DpWpKill(4728, SIGUSR2) failed [dpxxtool.c   2656]
    killing W5-3388 (SIGUSR2)
    *** ERROR => DpWpKill(3388, SIGUSR2) failed [dpxxtool.c   2656]
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:31:48 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Thu Jun 19 09:31:48 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA     4316 Ended         no      1   0             0                                                             
    1 DIA      956 Ended         no      1   0             0                                                             
    2 UPD     3692 Ended         no      1   0             0                                                             
    3 ENQ     3308 Ended         no      1   0             0                                                             
    4 BTC     4728 Ended         no      1   0             0                                                             
    5 SPO     3388 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Thu Jun 19 09:31:48 2008
    ===========================
    +------+--------+--------+--------+--------+--------+
    |  Typ |    now |   high |    max | writes |  reads |
    +------+--------+--------+--------+--------+--------+
    | NOWP |      0 |      2 |   2000 |      6 |      6 |
    +------+--------+--------+--------+--------+--------+
    |  DIA |      4 |      4 |   2000 |      4 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  UPD |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  ENQ |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  BTC |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  SPO |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  UP2 |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    max_rq_id          11
    wake_evt_udp_now     0
    wake events           total     7,  udp     7 (100%),  shm     0 (  0%)
    since last update     total     7,  udp     7 (100%),  shm     0 (  0%)
    Dump of tm_adm structure:               Thu Jun 19 09:31:48 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Thu Jun 19 09:31:48 2008
    =============================
    Slots: 20, Used: 1, Max: 0
    +------+--------------+----------+-------------+
    |   id | owner        |   pid    | eyecatcher  |
    +------+--------------+----------+-------------+
    |    0 | DISPATCHER   |       -1 | *WPCAAD000* |
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:31:53 2008
    NiISelect: TIMEOUT occured (5000ms)
    Shutdown server ...
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (4104) (SOFT_KILL)
    Stop icman
    killing process (2228) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:4104  HANDLE:1608)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:31:54 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:4104  HANDLE:1608)
    wait for end of icman
    [DpProcDied] Process lives  (PID:2228  HANDLE:1624)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:31:55 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2228  HANDLE:1624)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:31:56 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2228  HANDLE:1624)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:31:57 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2228  HANDLE:1624)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:31:58 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2228  HANDLE:1624)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:31:59 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2228  HANDLE:1624)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:32:00 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2228  HANDLE:1624)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:32:01 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2228  HANDLE:1624)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:32:02 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2228  HANDLE:1624)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:32:03 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2228  HANDLE:1624)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:32:04 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:2228  HANDLE:1624)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1645
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:32:05 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:2228  HANDLE:1624)
    NiIMyHostName: hostname = 'PackardBell'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11447]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 1572 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 1572 (pos=2)
    SiSelNRemove: removed sock 1572
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/20/6
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 1572
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 4280) [dpxxdisp.c   9836]
    Good Bye .....
    msg_server.exe developer trace:
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr 4392] Thu Jun 19 11:30:33 2008
    [Thr 4392] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    23
    intno      20050900
    make:      multithreaded, ASCII
    pid        2824
    [Thr 4392] Thu Jun 19 11:30:34 2008
    [Thr 4392] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2824) [msxxserv.c   1828]
    [Thr 4392] Thu Jun 19 11:30:35 2008
    [Thr 4392] load acl file = C:\usr\sap\NSP\SYS\global\ms_acl_info.DAT
    [Thr 4392] MsGetOwnIpAddr: my host addresses are :
    [Thr 4392]   1 : [10.4.13.98] PackardBell.paper.mondi.co.za (HOSTNAME)
    [Thr 4392]   2 : [127.0.0.1] localhost (LOCALHOST)
    [Thr 4392]   3 : [10.76.164.214] PackardBell (NILIST)
    [Thr 4392] Thu Jun 19 11:30:39 2008
    [Thr 4392] MsHttpInit: full qualified hostname = PackardBell
    [Thr 4392] HTTP logging is switch off
    [Thr 4392] set HTTP state to LISTEN
    [Thr 4392] ms/icf_info_server : deleted
    [Thr 4392] *** I listen to port sapmsNSP (3600) ***
    [Thr 4392] *** I listen to internal port 3900 (3900) ***
    [Thr 4392] *** HTTP port 8100 state LISTEN ***
    [Thr 4392] CUSTOMER KEY: >A0585523289<
    [Thr 4392] Thu Jun 19 11:32:05 2008
    [Thr 4392] *** ERROR => MsSClientHandle: no server provides service ENQ  (4), requested from PackardBell_NSP_00 [msxxserv.c   4658]
    Edited by: David Bann on Jun 19, 2008 11:44 AM

    Seems there is a problem with the database but I have no idea how to fix it...
    Please see contents of dev_w0 file:
    trc file: "dev_w0", trc level: 1, release: "700"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ

    B Thu Jun 19 11:55:51 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' ...
    B  Library 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' loaded
    B  Version of 'C:\usr\sap\NSP\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.19)
    B  New connection 0 created
    M sysno      00
    M sid        NSP
    M systemid   560 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    23
    M intno      20050900
    M make:      multithreaded, ASCII
    M pid        952
    M
    M  kernel runs with dp version 202(ext=109) (@(#) DPLIB-INT-VERSION-202)
    M  length of sys_adm_ext is 360 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 952) [dpxxdisp.c   1288]

    I Thu Jun 19 11:55:52 2008
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          5280     (880)
    M  DpShMCreate: sizeof(tm_adm)          3351072     (16672)
    M  DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
    M  DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    M  DpShMCreate: sizeof(comm_adm)          528048     (1048)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1076)
    M  DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 04C80040, size: 3950264)
    M  DpShMCreate: allocated sys_adm at 04C80040
    M  DpShMCreate: allocated wp_adm at 04C81978
    M  DpShMCreate: allocated tm_adm_list at 04C82E18
    M  DpShMCreate: allocated tm_adm at 04C82E48
    M  DpShMCreate: allocated wp_ca_adm at 04FB5068
    M  DpShMCreate: allocated appc_ca_adm at 04FB5518
    M  DpShMCreate: allocated comm_adm at 04FB59C8
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 05036878
    M  DpShMCreate: allocated gw_adm at 050368B8
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 050368E8
    M  DpShMCreate: allocated wall_adm at 050368F0
    Y  *** ERROR => ztta/diag_area is 64000. [sapinit.c    325]
    Y  *** ERROR => ztta/diag_area adjusted to 128000 (minimum value). [sapinit.c    327]
    Y  *** ERROR => ztta/cua_area is 90000. [sapinit.c    963]
    Y  *** ERROR => ztta/cua_area adjusted to 250000. [sapinit.c    967]
    X  EmInit: MmSetImplementation( 2 ).
    X  MM diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation flat
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M  ThInit: running on host PackardBell
    M  calling db_connect ...

    C  DBSDBSLIB : version 700.08, patch 0.019 (Make PL 0.23)
    C  MAXDB shared library (dbsdbslib) patchlevels (last 10)
    C    (0.019) UPDSTAT optimized (note 870327)
    C    (0.010) MaxDB DBSL patch collection 1 2005 (note 850830)
    C    (0.009) New stream compression available with LVC 7.6.0 b12 (note 835809)
    C    (0.008) Support of SDBUPDEXCL (note 847616)
    C    (0.005) Switch stream compression on/off (note 835809)
    C    (0.005) ITAB stream handling optimized (note 835809)


    C  Loading SQLDBC client runtime ...
    C  SQLDBC SDK Version : SQLDBC.H  7.6.0    BUILD 002-121-083-965
    C  SQLDBC Library Version : libSQLDBC 7.6.0    BUILD 018-123-113-357
    C  SQLDBC client runtime is MaxDB 7.6.0.018 CL 113357
    C  INFO : SQLOPT= -I 0 -t 0
    C  Try to connect (DEFAULT) on connection 0 ...

    C Thu Jun 19 11:55:53 2008
    C  *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:database not running))
    [dbsdbsql.cpp 118]
    B  ***LOG BV3=> severe db error -10709    ; work process is stopped [dbsh#1 @ 1195] [dbsh    1195 ]
    B  ***LOG BY2=> sql error -10709 performing CON [dblink#3 @ 431] [dblink  0431 ]
    B  ***LOG BY0=> Connection failed (RTE:database not running) [dblink#3 @ 431] [dblink  0431 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1391]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9995]

    M  Info for wp 0

    M    stat = 4
    M    reqtype = 1
    M    act_reqtype = -1
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source = 255
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    vm = V-1

    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server PackardBell_NSP_00 on host PackardBell (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Thu Jun 19 11:55:53 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10180
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************

    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   720]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  260]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 952) [dpnttool.c   327]
    Also see contents of dev_disp file:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      00
    sid        NSP
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    23
    intno      20050900
    make:      multithreaded, ASCII
    pid        5928
    Thu Jun 19 11:55:45 2008
    kernel runs with dp version 202(ext=109) (@(#) DPLIB-INT-VERSION-202)
    length of sys_adm_ext is 360 bytes
    *** SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 5928) [dpxxdisp.c   1226]
         shared lib "dw_xml.dll" version 23 successfully loaded
         shared lib "dw_xtc.dll" version 23 successfully loaded
         shared lib "dw_stl.dll" version 23 successfully loaded
         shared lib "dw_gui.dll" version 23 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    Thu Jun 19 11:55:49 2008
    *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5209]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpShMCreate: sizeof(wp_adm)          5280     (880)
    DpShMCreate: sizeof(tm_adm)          3351072     (16672)
    DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
    DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1076)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 04C80040, size: 3950264)
    DpShMCreate: allocated sys_adm at 04C80040
    DpShMCreate: allocated wp_adm at 04C81978
    DpShMCreate: allocated tm_adm_list at 04C82E18
    DpShMCreate: allocated tm_adm at 04C82E48
    DpShMCreate: allocated wp_ca_adm at 04FB5068
    DpShMCreate: allocated appc_ca_adm at 04FB5518
    DpShMCreate: allocated comm_adm at 04FB59C8
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 05036878
    DpShMCreate: allocated gw_adm at 050368B8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 050368E8
    DpShMCreate: allocated wall_adm at 050368F0
    MBUF state OFF
    *** ERROR => ztta/diag_area is 64000. [sapinit.c    325]
    *** ERROR => ztta/diag_area adjusted to 128000 (minimum value). [sapinit.c    327]
    *** ERROR => ztta/cua_area is 90000. [sapinit.c    963]
    *** ERROR => ztta/cua_area adjusted to 250000. [sapinit.c    967]
    EmInit: MmSetImplementation( 2 ).
    MM diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation flat
    <EsNT> Memory Reset disabled as NT default
    <ES> 127 blocks reserved for free list.
    ES initialized.
    Thu Jun 19 11:55:50 2008
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( PackardBell) [dpxxdisp.c   11163]
    CCMS: alert/MONI_SEGM_SIZE = 0   monitoring and alerting switched off.
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 23
    Release check o.K.
    Thu Jun 19 11:56:30 2008
    *** ERROR => W0 (pid 952) died [dpxxdisp.c   13743]
    *** ERROR => W1 (pid 3244) died [dpxxdisp.c   13743]
    my types changed after wp death/restart 0x9f --> 0x9e
    *** ERROR => W2 (pid 3376) died [dpxxdisp.c   13743]
    my types changed after wp death/restart 0x9e --> 0x9c
    *** ERROR => W3 (pid 5052) died [dpxxdisp.c   13743]
    my types changed after wp death/restart 0x9c --> 0x98
    *** ERROR => W4 (pid 4160) died [dpxxdisp.c   13743]
    my types changed after wp death/restart 0x98 --> 0x90
    *** ERROR => W5 (pid 2988) died [dpxxdisp.c   13743]
    my types changed after wp death/restart 0x90 --> 0x80
    *** DP_FATAL_ERROR => DpWPCheck: no more work processes
    *** DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    killing W0-952 (SIGUSR2)
    *** ERROR => DpWpKill(952, SIGUSR2) failed [dpxxtool.c   2656]
    killing W1-3244 (SIGUSR2)
    *** ERROR => DpWpKill(3244, SIGUSR2) failed [dpxxtool.c   2656]
    killing W2-3376 (SIGUSR2)
    *** ERROR => DpWpKill(3376, SIGUSR2) failed [dpxxtool.c   2656]
    killing W3-5052 (SIGUSR2)
    *** ERROR => DpWpKill(5052, SIGUSR2) failed [dpxxtool.c   2656]
    killing W4-4160 (SIGUSR2)
    *** ERROR => DpWpKill(4160, SIGUSR2) failed [dpxxtool.c   2656]
    killing W5-2988 (SIGUSR2)
    *** ERROR => DpWpKill(2988, SIGUSR2) failed [dpxxtool.c   2656]
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:40 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Thu Jun 19 09:56:40 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program  Cl  User         Action                    Table
    0 DIA      952 Ended         no      1   0             0                                                             
    1 DIA     3244 Ended         no      1   0             0                                                             
    2 UPD     3376 Ended         no      1   0             0                                                             
    3 ENQ     5052 Ended         no      1   0             0                                                             
    4 BTC     4160 Ended         no      1   0             0                                                             
    5 SPO     2988 Ended         no      1   0             0                                                             
    Dispatcher Queue Statistics               Thu Jun 19 09:56:40 2008
    ===========================
    +------+--------+--------+--------+--------+--------+
    |  Typ |    now |   high |    max | writes |  reads |
    +------+--------+--------+--------+--------+--------+
    | NOWP |      0 |      2 |   2000 |      6 |      6 |
    +------+--------+--------+--------+--------+--------+
    |  DIA |      5 |      5 |   2000 |      5 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  UPD |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  ENQ |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  BTC |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  SPO |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    |  UP2 |      0 |      0 |   2000 |      0 |      0 |
    +------+--------+--------+--------+--------+--------+
    max_rq_id          12
    wake_evt_udp_now     0
    wake events           total     7,  udp     7 (100%),  shm     0 (  0%)
    since last update     total     7,  udp     7 (100%),  shm     0 (  0%)
    Dump of tm_adm structure:               Thu Jun 19 09:56:40 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    RM-T6, U7,     , PackardBell, 11:55:52, M0, W-1,     , 1/0
    Workprocess Comm. Area Blocks               Thu Jun 19 09:56:40 2008
    =============================
    Slots: 20, Used: 2, Max: 1
    +------+--------------+----------+-------------+
    |   id | owner        |   pid    | eyecatcher  |
    +------+--------------+----------+-------------+
    |    0 | DISPATCHER   |       -1 | *WPCAAD000* |
    |    1 | DISPATCHER   |       -1 | *WPCAAD001* |
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:45 2008
    NiISelect: TIMEOUT occured (5000ms)
    Shutdown server ...
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (5104) (SOFT_KILL)
    Stop icman
    killing process (3916) (SOFT_KILL)
    Terminate gui connections
    send SHUTDOWN to REM TM 6
    blks_in_queue/wp_ca_blk_no/wp_max_no = 2/20/6
    LOCK WP ca_blk 2
    return errno (-17) to T6
    errormsg without overhead: take mode 0
    NiBufIAlloc: malloc NiBufadm, to 0 bytes
    try to send 14 to M0
    NiBufSend starting
    NiIWrite: hdl 4 sent data (wrt=14,pac=1,MESG_IO)
    REL WP ca_blk 2
    set status of T6 to TM_DISCONNECTED
    NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
    SiSelNSet: set events of sock 1540 to: ---
    NiBufISelRemove: remove hdl 4 from set0
    SiSelNRemove: removed sock 1540 (pos=4)
    SiSelNRemove: removed sock 1540
    NiSelIRemove: removed hdl 4
    DpDelSocketInfo: del info for socket 4 (type=3)
    NiICloseHandle: shutdown and close hdl 4 / sock 1540
    NiBufIClose: clear extension for hdl 4
    dp_tm_adm[6].stat = DP_SLOT_FREE
    DpGetSchedule: next schedule 1213869410/187000
    DpGetSchedule: no schedule found
    DpITmSlotRelease: release slot 6
    DpListInsert: insert elem 6 into tmadm_free_list (at begin)
    DpListInsert: 195 elems in tmadm_free_list
    DpListRemove: remove elem 6 from tmadm_inuse_list
    DpListRemove: 6 elems in tmadm_inuse_list
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:5104  HANDLE:1612)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:46 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:5104  HANDLE:1612)
    wait for end of icman
    [DpProcDied] Process lives  (PID:3916  HANDLE:1628)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:47 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3916  HANDLE:1628)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:48 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3916  HANDLE:1628)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:49 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3916  HANDLE:1628)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:50 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3916  HANDLE:1628)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:51 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3916  HANDLE:1628)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:52 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3916  HANDLE:1628)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:53 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3916  HANDLE:1628)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:54 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3916  HANDLE:1628)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:55 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3916  HANDLE:1628)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:56 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process lives  (PID:3916  HANDLE:1628)
    waiting for termination of icman ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1649
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Thu Jun 19 11:56:57 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:3916  HANDLE:1628)
    NiIMyHostName: hostname = 'PackardBell'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   11447]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 1576 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 1576 (pos=2)
    SiSelNRemove: removed sock 1576
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 2/20/6
    LOCK WP ca_blk 2
    make DISP owner of wp_ca_blk 2
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 1576
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 5928) [dpxxdisp.c   9836]
    Good Bye .....

  • Merge to HDR Pro and Camera Raw stop working...

    I have been noticing for the past few days that two aspects of PS CS6 completely stop working. Those are Merge to HDR Pro and Camera Raw 7.0. What happens is I can see a photo yet no changes take place no matter what I change, I try zooming, I try changing settings, nothing at all changes. At one point Merge to HDR Pro would not let me cancel or click okay to do anything. To solve this problem I must reboot PS. Merge to HDR Pro this problem keeps happening, with Camera Raw I have seen this issue twice so far.
    I am running Windows XP (SP3).

    Adobe Photoshop Version: 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00) x32
    Operating System: Windows XP 32-bit
    Version: 5.1 Service Pack 3
    System architecture: Intel CPU Family:15, Model:2, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, HyperThreading
    Physical processor count: 1
    Logical processor count: 2
    Processor speed: 2800 MHz
    Built-in memory: 3071 MB
    Free memory: 1261 MB
    Memory available to Photoshop: 1710 MB
    Memory used by Photoshop: 60 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Normal
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: False.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: ATI Radeon HD 3600 Series
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 1024, right: 1280
    Video Card Number: 1
    Video Card: ATI Radeon HD 3600 Series     
    OpenCL Unavailable
    Driver Version: 6.14.10.7236
    Driver Date: 20111026030140.000000-000
    Video Card Driver: ati2dvag.dll
    Video Mode: 1280 x 1024 x 4294967296 colors
    Video Card Caption: ATI Radeon HD 3600 Series     
    Video Card Memory: 1024 MB
    Video Rect Texture Size: 8192
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6\
    Temporary file path: C:\DOCUME~1\Lynda\LOCALS~1\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
       D:\, 74.5G, 9.93G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
        A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
        ACE.dll   ACE 2012/01/18-15:07:40   66.492997   66.492997
        adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
        AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
        AdobeOwl.dll   Adobe Owl 2012/02/09-16:00:02   4.0.93   66.496052
        AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
        AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1642  
        AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
        AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
        AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
        adobe_caps.dll   Adobe CAPS   5,0,10,0  
        AGM.dll   AGM 2012/01/18-15:07:40   66.492997   66.492997
        ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
        aif_core.dll   AIF   3.0   62.490293
        aif_ocl.dll   AIF   3.0   62.490293
        aif_ogl.dll   AIF   3.0   62.490293
        amtlib.dll   AMTLib   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
        ARE.dll   ARE 2012/01/18-15:07:40   66.492997   66.492997
        AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
        AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
        Bib.dll   BIB 2012/01/18-15:07:40   66.492997   66.492997
        BIBUtils.dll   BIBUtils 2012/01/18-15:07:40   66.492997   66.492997
        boost_date_time.dll   DVA Product   6.0.0  
        boost_signals.dll   DVA Product   6.0.0  
        boost_system.dll   DVA Product   6.0.0  
        boost_threads.dll   DVA Product   6.0.0  
        cg.dll   NVIDIA Cg Runtime   3.0.00007  
        cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
        CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
        CoolType.dll   CoolType 2012/01/18-15:07:40   66.492997   66.492997
        data_flow.dll   AIF   3.0   62.490293
        dvaaudiodevice.dll   DVA Product   6.0.0  
        dvacore.dll   DVA Product   6.0.0  
        dvamarshal.dll   DVA Product   6.0.0  
        dvamediatypes.dll   DVA Product   6.0.0  
        dvaplayer.dll   DVA Product   6.0.0  
        dvatransport.dll   DVA Product   6.0.0  
        dvaunittesting.dll   DVA Product   6.0.0  
        dynamiclink.dll   DVA Product   6.0.0  
        ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
        FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
        filter_graph.dll   AIF   3.0   62.490293
        hydra_filters.dll   AIF   3.0   62.490293
        icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
        icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
        image_compiler.dll   AIF   3.0   62.490293
        image_flow.dll   AIF   3.0   62.490293
        image_runtime.dll   AIF   3.0   62.490293
        JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
        libeay32.dll   The OpenSSL Toolkit   0.9.8g  
        libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
        libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
        LogSession.dll   LogSession   2.1.2.1640  
        mediacoreif.dll   DVA Product   6.0.0  
        MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
        msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
        msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
        msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
        msvcp71.dll   Microsoft® Visual Studio .NET   7.10.3077.0  
        msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
        msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
        msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
        msvcr71.dll   Microsoft® Visual Studio .NET   7.10.3052.4  
        msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195  
        msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
        pdfsettings.dll   Adobe PDFSettings   1.04  
        Photoshop.dll   Adobe Photoshop CS6   CS6  
        Plugin.dll   Adobe Photoshop CS6   CS6  
        PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (32 bit)   3.0.0.383  
        PSArt.dll   Adobe Photoshop CS6   CS6  
        PSViews.dll   Adobe Photoshop CS6   CS6  
        SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
        ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
        shfolder.dll   Microsoft(R) Windows (R) 2000 Operating System   5.50.4027.300  
        ssleay32.dll   The OpenSSL Toolkit   0.9.8g  
        tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
        tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
        TfFontMgr.dll   FontMgr   9.3.0.113  
        TfKernel.dll   Kernel   9.3.0.113  
        TFKGEOM.dll   Kernel Geom   9.3.0.113  
        TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
        updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
        WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
        wu3d.dll   U3D Writer   9.3.0.113  
    Required plug-ins:
        Accented Edges 13.0
        Adaptive Wide Angle 13.0
        ADM 3.11x01
        Angled Strokes 13.0
        Average 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Bas Relief 13.0
        BMP 13.0
        Camera Raw 7.0
        Chalk & Charcoal 13.0
        Charcoal 13.0
        Chrome 13.0
        Cineon 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Collada 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Color Halftone 13.0
        Colored Pencil 13.0
        CompuServe GIF 13.0
        Conté Crayon 13.0
        Craquelure 13.0
        Crop and Straighten Photos 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Crop and Straighten Photos Filter 13.0
        Crosshatch 13.0
        Crystallize 13.0
        Cutout 13.0
        Dark Strokes 13.0
        De-Interlace 13.0
        Dicom 13.0
        Difference Clouds 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Diffuse Glow 13.0
        Displace 13.0
        Dry Brush 13.0
        Eazel Acquire 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Embed Watermark 4.0
        Entropy 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Extrude 13.0
        FastCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Fibers 13.0
        Film Grain 13.0
        Filter Gallery 13.0
        Fresco 13.0
        Glass 13.0
        Glowing Edges 13.0
        Grain 13.0
        Graphic Pen 13.0
        Halftone Pattern 13.0
        HDRMergeUI 13.0
        IFF Format 13.0
        Ink Outlines 13.0
        JPEG 2000 13.0
        Kurtosis 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Lens Blur 13.0
        Lens Correction 13.0
        Lens Flare 13.0
        Liquify 13.0
        Matlab Operation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Maximum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Mean 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Measurement Core 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Median 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Mezzotint 13.0
        Minimum 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        MMXCore Routines 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Mosaic Tiles 13.0
        Multiprocessor Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Neon Glow 13.0
        Note Paper 13.0
        NTSC Colors 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Ocean Ripple 13.0
        Oil Paint 13.0
        OpenEXR 13.0
        Paint Daubs 13.0
        Palette Knife 13.0
        Patchwork 13.0
        Paths to Illustrator 13.0
        PCX 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Photocopy 13.0
        Photoshop 3D Engine 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Picture Package Filter 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Pinch 13.0
        Pixar 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Plaster 13.0
        Plastic Wrap 13.0
        PNG 13.0
        Pointillize 13.0
        Polar Coordinates 13.0
        Portable Bit Map 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Poster Edges 13.0
        Radial Blur 13.0
        Radiance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Range 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Read Watermark 4.0
        Reticulation 13.0
        Ripple 13.0
        Rough Pastels 13.0
        Save for Web 13.0
        ScriptingSupport 13.0
        Shear 13.0
        Skewness 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Smart Blur 13.0
        Smudge Stick 13.0
        Solarize 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Spatter 13.0
        Spherize 13.0
        Sponge 13.0
        Sprayed Strokes 13.0
        Stained Glass 13.0
        Stamp 13.0
        Standard Deviation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Sumi-e 13.0
        Summation 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Targa 13.0
        Texturizer 13.0
        Tiles 13.0
        Torn Edges 13.0
        Twirl 13.0
        Underpainting 13.0
        Vanishing Point 13.0
        Variance 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Variations 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Water Paper 13.0
        Watercolor 13.0
        Wave 13.0
        WIA Support 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        Wind 13.0
        Wireless Bitmap 13.0 (13.0 20120305.m.415 2012/03/05:21:00:00)
        ZigZag 13.0
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
        Workflow
        Stack Modes
        Paper Texture
        Painting Assistant
        Mode
        GuideGuide
        Adobe Watermark
        Adobe EMailer
        Mini Bridge
        Kuler
    Installed TWAIN devices: NONE

  • Hi my abode photoshop cs 5.1 stop working for windows 7

    abode photoshop cs5.1 stop working for windows 7 error

    I have a subwoofer and 5 speakers (2 for front, 2 for rear, 1 for center)...Philips MMS460 5.1.  Connection to the on-board RealTek HD Audio is simple, orange for the subwoofer, green for front and black for rear.I have already tried downloading the latest drivers from the motherboard manufacturers website,I have tried connecting the subwoofer connectors to different jacks (reversed black and green).
    I have experimented with the settings in the RealTek HD Audio Manager and Control Panel->Sound windows.  Nothing works.
    These exact same subwoofer and speakers worked perfectly fine in vISTA Home basic
    1. Disconnect the speaker system from the pc rear audio panel
    2. Remove the on-board audio using the "Add or Remove Hardware" option in Control Panel
    3. Reboot the pc, install the driver.  Re-connect the speaker system.
    4. Using the Sound applet found in Control Panel, configure the speakers for surround sound
    5. Reboot the pc.
    And now resume all of that ...i have been on Realtek hd audio manager->Speaker configuration set on 5.1 making the test ...EVERITHING WORKS FINE but ...finally when i open for example WINAMP AND PLAY A SONG ....is only  played on front *or stereo..So on what im wrong?

  • Itunes wont open and gives me a message saying "Itunes has stopped working".  What can I do to fix this?

    I use windows vista and I have upgraded my itunes.  Now when I open it, it gives me a message saying "itunes has stopped working"  and then gives me a message saying it will notify me for a solution.  What can I do to fix this so it can open and not give me any more problems???

    First you can try;
    Try restarting PC and run itunes again!
    If error again than perform clean instal of itunes (uninstal first and than instal again)!

  • Each time I try to synch photos from my Windows 7 PC to my iPad2, iTunes stops working, and the error report says Problem Event Name:     APPCRASH   Application Name:     iTunes.exe   Application Version:     10.3.1.55   Application Timestamp:     4deec35

    Each time I try to synch photos from my Windows7 PC to my iPad2, iTunes stops working and the error message is:
    Problem Event Name:                          APPCRASH
      Application Name:                             iTunes.exe
      Application Version:                           10.3.1.55
      Application Timestamp:                    4deec351
      Fault Module Name:                          ntdll.dll
      Fault Module Version:                        6.1.7601.17514
      Fault Module Timestamp:                 4ce7ba58
      Exception Code:                                  c0000005
      Exception Offset:                                0002e3fb
      OS Version:                                          6.1.7601.2.1.0.768.3
      Locale ID:                                             1033
      Additional Information 1:                  0a9e
      Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:                  0a9e
      Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
    I reloaded iTunes 10 (64 bit) successfully, but the problem remains the same.
    Any suggestions?

    I looked in the folder from which I want to synch photos, but there is no such thing as an "ipod photo cache" in that folder, or sub-folders, as suggested in the link which you were nice enough to provide.
    I have also tried removing photos from my iPad2 Photos App, and "iTunes has stopped working" shows up  again as soon as I click on the "Synch photos from" button.

  • Since I installed a printer software Satellite L300 has stopped working

    Hello there!
    I'm new here so not really sure if I'm posting in the right place. Mods, please feel free to move to the relevant section, thank you.
    OK I have a Toshiba Satellite L300 Laptop and ever since I installed a printer software on Wednesday night, my laptop has suddenly stopped working!
    Ever since Thursday night, I have been trying to get it working but I'm faced with this message:
    when i load it up it goes to Windows error recovery:
    'windows has failed to start.a recent hardware or software change might be the cause
    if windows files have been damaged or configured incorrectly,startup repair can help diagnose and fix the problem.if power was interrupted during startup,choose start windows normally'
    then it gives two options: Launch startup repair (recomended)
    start windows normally
    ==========
    -so i click launch startup repair (reccomended)
    -then a scren loads up called 'system recovery options'.. it says: select an operating system to repair and click next.only windows vista operating systems are listed and can be repaired
    if you do not see your operating system listed, click load drivers to load drivers for your hard disks'.....
    but nothing comes up so i click load drivers and it just gives me loads of random folders...and i haven't a clue which ones to load
    ========
    5 years ago Report Abuse
    Additional Details
    so i just click 'next'
    ========
    then i have 5 options:
    -startup repair
    -system restore
    -windows complete pc restore
    -windows memory diagnostic tool
    -command prompt
    ==========
    startup repair says it cannot manually fix any problems
    -system restore just says your computer is in a limited state and performing this action cannot be changed...but there is no option to do so
    -windows comple pc restore says i need to insert a backup disk which I dont have
    windows memory diagnostics tool says that windows is preventing this
    ============
    but on the system resotre it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
    but i don't know where...i typed it in the command prompt but don't understand how to use it
    =========
    i also tried to click start windows normally but it won't work

    If the problem is installed software, start notebook in safe mode and try to start system restore from there.
    Please let me know which options are available. Can you roll back OS few days back?
    Are some restore points listed there?

  • Mozalloc.dll A firefox plug in container has stopped working. I can't get firefox to work for more than 2 mins. before crashing. How do I make this stop?

    AdapterDeviceID: 0x9712
    AdapterDriverVersion: 8.861.1.2000
    AdapterSubsysID: 164c103c
    AdapterVendorID: 0x1002
    Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:33.1.1
    AvailablePageFile: 13967405056
    AvailablePhysicalMemory: 6222434304
    AvailableVirtualMemory: 3783245824
    BIOS_Manufacturer: Hewlett-Packard
    BlockedDllList:
    BreakpadReserveAddress: 46661632
    BreakpadReserveSize: 41943040
    BuildID: 20141113143407
    CrashTime: 1417153956
    EMCheckCompatibility: true
    EventLoopNestingLevel: 1
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1416895140
    Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x9712, AdapterSubsysID: 164c103c, AdapterDriverVersion: 8.861.1.2000
    D2D? D2D+ DWrite? DWrite+ D3D11 Layers? D3D11 Layers+
    ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 175
    StartupTime: 1417153798
    SystemMemoryUsePercentage: 25
    Theme: classic/1.0
    Throttleable: 1
    TotalPageFile: 16630353920
    TotalPhysicalMemory: 8316153856
    TotalVirtualMemory: 4294836224
    URL: https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=mozalloc.dll&step=aaq-question
    Vendor: Mozilla
    Version: 33.1.1
    Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [UDP/IP] : 2 : 2 :
    MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
    MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
    RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
    RSVP TCP Service Provider : 2 : 1 :
    RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
    RSVP UDP Service Provider : 2 : 2 :
    useragent_locale: en-US
    This report also contains technical information about the state of the application when it crashed.
    AND:
    A plugin container for firefox has stopped working.
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: plugin-container.exe
    Application Version: 33.1.1.5430
    Application Timestamp: 54656826
    Fault Module Name: mozalloc.dll
    Fault Module Version: 33.1.1.5430
    Fault Module Timestamp: 54654321
    Exception Code: 80000003
    Exception Offset: 00001425
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

    Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]

  • HT1689 I can reach the iTunes Store from my iPod Touch, but it will not open on my PC running Windows 7.  Message shows that iTunes has stopped working.  This happens every time.  I have updated iTunes Software.  Will not solve the problem.  What is wrong

    I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded.  When I click on the iTunes Store Box, Nothing happens except for a message that reads:
              iTunes has stopped working.
    The following items give me a choice, but no answer comes up.  The computer will shut down the website.
              "Check online for a solution and close the program"
              "Close the program."
    There is an item below the box that is selectable for View problem details.  When clicked a long list of items show up.  I have listed some of the problems as written, but I do not understand them.  I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version.  How can we go back and download an earlier version of iTunes?
         Here are some of the Problem Details:
         "Problem signature:  APPCRASH
         Application Name:     iTunes.exe
         Application Version:  11.0.1.12
         Application Timestamp:  50c8fc7e"

    I had this exact same problem.  I found this fix and it worked for me. 
    Step 1:
    Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll. 
    Step 2:
    Browse and past that file into C:\Program Files (x86)\iTunes.
    Hope this helps you.  I wish I could remember where I saw this originally so I could thank them.
    Good Luck.
    Anthony

Maybe you are looking for

  • Load distribution of a Planned Order Operation

    Hi All, Need help in understanding an issue here. For a Planned Order, detailed scheduling happened ,and schedule and Cpacity requirements were generated. This is the case with just 1 operation. The requirement of this operation is of 1 Hour and sche

  • After install infra and mid tier, how do I put into one Farm?

    If I installed the infra , then the mid tier (all on one machine) How do I include the mid tier in the a farm that includes the infra i already installed? How do I link the mid tiers to the infra. I can link to both , which have separate ports 1810 a

  • Just Updated to Firefox 26.0...Hanging Worse Than Ever.

    I just updated to FireFox 26.0 a few hours ago, and now when I visit a site like Wonkette.com, the browser hangs are worse than ever before...and they were bad before. My browser is hanging (becomes completely unresponsive) minutes at a time before i

  • BEX function variable

    Hi Experts, Does anyone know if it is possible to save a KF value into a function variable (both in the same Query), so we can play with the KF value in the user exit? Thanks Regards, Albert

  • Advice on DatePicker of af:selectInputDate

    the date picker is very slowly. i suggest to use a embeded one instead of the popup dialog with current version. expect it will responde quickly when it is clicked.