I-Trigue 5600. need some proper, serious wiring advice not the (useless) pretty pictures

Ansd what a disappontment the I-Trigue 5600 doumentaton s and teh product is notceably excluded from some areas of your web site.
I am trying to output from 2 x RCA audio out connectors on my Sony KDL-V32A2U LCD TV. The diagrams iin theQuick Start Guide are unclear. How do I best connect so that I can upmix to 5.1
Please help. It's so frustrating!!

Lovepeaceguru,
If your TV is using RCA connector, you need to get a dual RCA to stereo minijack(3.5mm) cable. Have the RCA end connected to your TV and stereo minijack end to the subwoofer audio input(FRONT). Next, have the switch behind the subwoofer slide to 2CH->5.1 upmix.
Jason

Similar Messages

I need some help with Audigy 4( not the pro, just audigy 4) before I

okay, I got to downloads, and go to audigy 4 series, and find there is only audigy 4 pro, there not the regular, so my question is, do I use the audigy 4 pro drivers, or am I out of luck, because I am running x64, otherwise I'd get an x-fi card, but need a quick fix, bro's sound went and told him he could have my card, but need to know this before I buy, otherwise, I may just get the audigy 2 value or zs...anyone that can help plz do?

Try Resetting your iPod. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display: iPod isn't responding it appears to be frozen

Because of to much energy needed some of my usb port in the front hve been unactivated pls tell me how to reactivate these 2 usb port located in front

because of to much energy needed some of my usb port in the front hve been unactivated pls tell me how to reactivate these 2 usb port located in front
my mac pro is an early 2008 intel xeon hapertown
thanks a lot
patrick stanley thiollet

Thought you could use this info about getting FireWire to work! First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 15 minutes. plug it back in and try FW.
If that didn't work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
If that still didn't get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
A bad internal PRAM battery can also cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
Here's another Fw Faq.

When trying to use my webmail service it says i need some java to run reply to the emails. i am using an iPad iOS 6.1.3

when trying to use my webmail service it says i need some java to run reply to the emails. i am using an iPad iOS 6.1.3
what do i hve to do to be able to use my webmail ?

Java is not supported on iPads. Does your provider have a non-Java version or have their own app, or could you use the Mail or a third-party email app for it ?

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5

I would like to add to the Safari toolbar on my ipad 5 IOS 6 machine. I have searched the web and find some instructions to do this but the words and pictures do not match what I can see. I am beginning to think this is not a capabilty of the ipad 5 but perhaps for a Mac computer running Safari. Does anyone know if it is possible to add tools to the toolbar on the latest version of iPad OS & Safari Browser? If so please tell me how. Thanks

You cannot customize the Safari toolbar on the iPad.
What you can do on the iPad is go to Settings>Safari>Always show Bookmarks Bar>On and that will add a bookmarks bar on to the Safari browser.

I have 2 iPads, I can only download some apps to one device not the other one?

I have 2 iPads, but can only download some apps to one and not the other?. How can I get the same app on both iPads?
Thanks

1. Make sure iPad is using the latest software
2. Settings>General>Date and Time>Set Automatically>On
3. Make sure Time Zone is correct
4. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo.

Need some real serious help guys

Pasty, I redeem a ITunes card into my account and I wanted to buy somthing and then a secruity question thing came up and I don't remember the answers
Is there a way to reset them....please

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page should let you reset them : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use those steps on the HT5312 link above to add a rescue email address for potential future use.

Need some info about getting started with the GE70 2PC Apache

Hi guys!
I'm about to getting the new GE70 2PC Apache gaming notebook from MSI and since I'm really putting alot of money in this I really wanna handle it gently :p So I got some questions about this, since It'll be the first time I'd but a gaming notebook.
1) 1st of all, what do I do when I've first started the laptop? Do I place in the CD and install all the newest drivers from that CD? Afterwards install an anti virus and then I should be good to go?
2) I heard the Haswell i7 processors from Intel produce a hell of a lot heat. When I turn on turbo fan and turbo boost and I reach temperatures of around 90°C, would it harm the hardware of my laptop? Could any damage take place? Or would my processor/graphic card have a shorter life expectancy?
3) The graphic card would be the GTX 850m. Now I'm wondering, is on this particular laptop -> (MSI-ge70-2pc-019be-apache-azerty), is the graphic card the DDR3 version or the GDDR5 version? Because I heard even the GTX 765m can outperform the 850m DDR3. But I also heard that the GDDR5 version of this graphic card is noticeably better than the 765M graphic card.
4)Is it wise to keep the processor going on turbo boost (3,4 Ghz) forever?
5) Will I have internet problems? I heard alot of people having internet problems with the killer lan drivers lately..
6) What laptop do you think I should pick in overall? The 2PC Apache version or the GE70 2OE version (the one without SSD) ?
8) My Brother has the GE70 2OE which has the 765m graphics card, but he only has around 60 fps when he's playing League Of Legends, and LoL isn't the most demanding game right.. The FPS sometimes even drops to 40 (even when he's ALONE with no one around him). It feels like his FPS is capped at 60? Because most of the time it's just 60. But when I look at the settings I saw the FPS is uncapped.. I believe with this graphics card he must atleast achieve a constant 70-80 fps on this game right? Might something be wrong in the settings of the graphics card?
7) Is there anything I should know before I start gaming on this laptop? (something I should do to have best performance or something..?)
Grtz

Well...
1. When you get the laptop, use MSI Burn Recovery and make the backup disks (I prefer DVD's myself...). This way if something happens, you can reinstall all the software like you just bought it.
2. Haswell does produce quite a bit of heat. As long as you don't get much higher than 90C you should be ok. If you're getting into the high 90's or even 100C range, you probably need to replace the heatsink compound. MSI has had a number of issues with that aspect on notebooks. It is easily done though.
3. The only way to really answer that question is probably to contact MSI about it. >>How to contact MSI.<<
4. Turbo boost isn't really user controlled. I wouldn't worry about it.
5. You might have issues. I'm honestly not too sure. I know most people haven't had issues recently, but that's all relative. The drivers seem to be working rather well right now to be honest.
6. Depends what you want and what is available. Maybe the GE70 20E + buy an SSD will be cheaper than just buying the Apache version. I don't really know, but you could always look into it.
8. The 765M is a decent card....but remember, it's NOT the same as a 760 on a desktop. It's roughly equivalent to a 750 in the desktop world. That's not a bad card by any means, but you aren't going to be able to get 60+ FPS at 1920x1080 in many games. LOL is rather demanding as a game though to be perfectly honest. (throwing my personal opinion in on this, I always buy the highest end item I can in this case, because you won't be able to get any better really in the end until the next laptop comes out).
7. I would setup all your games in the NVidia control panel to use the NVidia high performance graphics processor. That way there is no confusion and it will use the right video card.
You don't really need to update drivers UNLESS you're having an issue (like BSoD's or game freezes or something similar).
The MSI customer service in the EU really seems to be hit or miss. Some people seem to get good service, some people get really crappy service. I'm honestly not sure what the problem is over there. =/

Need some real serious help with continuing disk problem

The story started when my internal hard drive, in my 15" lap top, gave up the ghost, and I bought a new replacement:
Seagate Momentus 5400.2 ST9120821A - hard drive - 120 GB - ATA-100
Manufacturer: Seagate Technology Inc.
Specs: 120 GB, 12.5 ms, 5400 rpm, 8 MB, ATA-100, 2.5" x 1/8H
I installed it in my laptop (model M8859LL/A) which I booted with my Tiger installation DVD. However, the Disk Utility Program did not pickup my new hard drive. I also booted with my DiskWarrior program and it doesn't see the disk either.
I got in touch with Seagate. The rep. there says it could be a bad disk, but asked if my laptop was compatible with the drive. He asked me to listen for disk noise when I turned on the computer -- there was none. That convinced him that the disk was defective.
Subsequently I found that the hard drive was indeed compatible with my laptop and that the second one was defective, so I sent that one back and ordered a replacement.
I just installed the replacement disk, However it too is not be seen by either Disk Warrior or Disk Utility. What now???
Dan Page
Maui, Hawaii

Hi Dan,
If, as Matthew suggested, you have the HD connector properly seated and it still doesn't work, the HD cable/connector itself may be damaged and need to be replaced. They are relatively inexpensive, so that would be my next troubleshooting step. You should be able to find one at one of the following:
pbfixit.com
pbparts.com
powerbookmedic.com
dttservice.com
powerbooktech.com
powerbookresq.com
powerbookguy.com
powerbookrepairshop.com
Good luck.

Need some info on how to keep the computer arm in place.

The flat panel will not stay in an upright postion, it keeps drooping down towards the keyboard. The guys at the apple store in our town said that since this product is no longer available I would have to purchase a new arm for the computer. Any help?

sammy,Welcome to Apple Discussions.
I believe that the arm is not user serviceable and requires a special tool (your local Apple Authorized Service Provider (AASP) should have one) - I'm surprised the Apple Store didn't offer to adjust it for a fee.
As the new arms come in at around £200 - £300 dependant on model; I would suggest looking in your local Yellow Pages and find an(other) AASP who can may the adjustment.
mrtotes

Firefox crashes - I need some help becaue I cannot understand the cause of my constant crashes...

These are my last two crashes. I tried all that is commonly advised, but crashes are still frequent, about once or more every day.
bp-dd8c6382-a254-4f16-aaf8-257152140313
bp-98dc2419-5892-4cf8-89a7-ce3382140312
Thanks

hello mozi108, i'm locking this thread, because you already have created a similar question yesterday at https://support.mozilla.org/en-US/questions/989596. please put all new information about the crashing issue there instead of opening new questions for it, so that contributors can follow up on you more easily. thank you!

Firefox crashes - I need some help because I cannot understand the cause of my constant crashes...

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/989596 /questions/989596]''
AND AGAIN AND AGAIN...
other two crashes in the last few minutes:
bp-e23f3f47-df28-49aa-9117-870ee2140313
bp-e656c64b-ddaa-4ca1-ab0a-2daea2140313

hello mozi108, i'm locking this thread, because you already have created a similar question yesterday at https://support.mozilla.org/en-US/questions/989596. please put all new information about the crashing issue there instead of opening new questions for it, so that contributors can follow up on you more easily. thank you!

I need some help taking my site over the top.

Ok, i built the site for a small business and i believe it looks better than most sites in the industry. How do i get it noticed in searches and take it over the top and make it look like it was done by a professional. How do i increase the search hits. Has a cottage industry spawned with people who do this in IWEB. i want to maintain control of the site.
Your thoughts and direction
john

Rugbyjoey wrote:
How do i get it noticed in searches...
John ~ This article may help:
_How to get your iWeb Websites into Google & Other Major Search Engines_
Rugbyjoey wrote:
...and make it look like it was done by a professional.
“Do only what is necessary to convey what is essential. Carefully eliminate elements that distract from the essential whole, elements that obstruct and obscure....Clutter, bulk, and erudition confuse perception and stifle comprehension, whereas simplicity allows clear and direct attention." — Richard Powell, in his book +Wabi Sabi Simple+.
"One of the biggest mistakes typical business people make with documents is going out of their way to seemingly use every centimeter of space on a page, filling it up with text, boxes, clip art, charts, footers, etc. Space, often called "white space," is good. Embrace it. Use it. Often, the more space you don't use on a page, the clearer your message becomes.
Empty space is beautiful, yes. But empty space also implies importance, elegance, professionalism. This is true with graphic design, but you can see the importance of space (both visual and physical) in the context of interior design. Think of the retail space, for example. Target is dedicated to design although they are a discounter. They know about space. Target stores are well designed. They have more empty space than other discounters, Walmart, for example."
...Understanding such basic points on graphic design will help set you apart. You can read more design tips in this Presentation Zen article:

I couldn't drag my photos from iphoto to my desktop or folder so I rebuilt from automatic backup and some photos were saved but not the photos that I need. what do i do?

I have a macbook pro and I updated iphoto to the latest version, last night.

Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder Window should open with the file selected. Does it?
Regards
TD

Need to display only leaf and not the node using tree table

Hi,
Am using Jdeveloper 11.1.2.0.0 . As per requirement , am having Department - Employee View wherein Department is the parent considered as node and Employee as a child which is considered as a leaf. Having dragged and dropped the DepartmentView as a tree table -> shuttle department id and department name to be displayed -> added EmployeeView to the same and shuttled employee id along with the first and last name. so this works as it has to be in the below structure...
10 ADF
256 A
257 B
258 C
20 JAVA
259 D
260 E
Code for the same ..
<af:treeTable value="#{bindings.DepartmentsView.treeModel}" var="node"
selectionListener="#{bindings.DepartmentsView.treeModel.makeCurrent}" rowSelection="single" id="tt1">
<f:facet name="nodeStamp">
<af:column id="c1">
<af:outputText value="#{node}" id="ot1"/>
</af:column>
</f:facet>
<f:facet name="pathStamp">
<af:outputText value="#{node}" id="ot2"/>
</f:facet>
</af:treeTable>
*Here comes my requirement , need to display only the leaf nodes which has employee name [Employees] and need to hide the node [Department] in the below structure....*
256 A
257 B
258 C
259 D
260 E
Things tried to achieve the requirement....
1. Got only the EmployeeName in the nodeStamp facet as below. Hence am getting only Employee name but the issue is am getting the icon for the node [Parent - Department]. Now how do i hide the same.
<af:treeTable value="#{bindings.DepartmentsView.treeModel}" var="node"
selectionListener="#{bindings.DepartmentsView.treeModel.makeCurrent}" rowSelection="single" id="tt1">
<f:facet name="nodeStamp">
<af:column id="c1">
<af:outputText *value="#{node.FirstName}"* id="ot1"/>
</af:column>
</f:facet>
<f:facet name="pathStamp">
<af:outputText value="#{node}" id="ot2"/>
</f:facet>
</af:treeTable>
Please do suggest some solution....
Thanks and Regards,
Vinitha G

Hi,
Thanks for the reply. As the project has already implemented tree table they do not wanna change any logic written for the same. So they wanted to just display only the leaf node data using treetable component. Can you please suggest.
Thanks and Regards,
Vinitha G

I-Trigue 5600. need some proper, serious wiring advice not the (useless) pretty pictures

Similar Messages

Maybe you are looking for