I-Trigue L3450 Speaker System

i have some question about the M-Port provided on the audio controller port ...
i have a Muvo TX FM MP3 Player, i try to connect it into the M-Port and play it, it seems not functioning at all, no sound.
does it require any driver ?
thx !!!

badboyuk,
The USB port on the volume control is what we call a M-PORT. Basically, it does what you mention by it's only compatible with M-PORT compatible player and as far as I know, only the Creative MuVo NX is supported. The speaker doesn't need to be connected to the computer only. You can connect to any audio source that's using a 3.5mm stereo minijack output.
You can also download the user guide for this speaker from the Product Documentation page for more information regarding the speaker system.
Jason

Similar Messages

Creative I-Trigue L3450 Speaker System

Hi.
I am interested in the above product but was just wondeirng if anybody could answer some questions for me.
Is it possible to plug a USB MP3 player into the controller of this system and have the music played? The following link seems to suggest that a USB MP3 player can be plugged in:
http://www.boysstuff.co.uk/product.a...id=&src=Search (st picture)
Can Anybody confirm this?
Also, must this system be connected to a PC or can it simple be plugged into the mains and have MP3 players etc run off it's
Any help would be brilliant!
Thanks!

badboyuk,
The USB port on the volume control is what we call a M-PORT. Basically, it does what you mention by it's only compatible with M-PORT compatible player and as far as I know, only the Creative MuVo NX is supported. The speaker doesn't need to be connected to the computer only. You can connect to any audio source that's using a 3.5mm stereo minijack output.
You can also download the user guide for this speaker from the Product Documentation page for more information regarding the speaker system.
Jason

I Trigue 5600 Speaker System RMA

Hi, would be grateful for some help please. A couple of days ago my speaker system stopped working. It is within warranty and I contacted the support centre. I was sent a troubleshooting guide which I followed through and still the speaker system isn't working.What I did discover however, is that the power supply unit that plugs directly into the subwoofer is actually working as I could hear it buzzing when I put it next to my ear. Also, it does get a bit warm when it's on.Anyway, I tried to explain that to customer support, and they have sent me an RMA no for the power supply !Phoned up this morning and I'm not getting anywhere. The problem could be either with the subwoofer, or the volume control unit, or failing that the power supply unit. The volume control produces a blue light normally when its turned on, but that isn't also happening anymore. I am from the UK btw and if anyone could help, I would be very grateful. I have also sent numerous emails trying to explain the above. Thanks

Well i think i have the same problem as you with these exact speakers (i-trigue 5600). I found out it was the volume control not that long ago, so im guessing this is the same problem as you! Try lifting the black turner thing on the volume control away from it and turn it and see if the blue light comes on, mine came on for a second, but the volume control is definitely faulty. If you know of any way to get a volume control this would also help me :-) Peace outChris

I trigue l3450 volume controller

I am looking for a volume controller (ANY volume controller) that works on our "i trigue l3450 speaker set". ANYONE?! Thanks, really appreciate any info!! Kurt (Netherlands).

Hi,
I am afraid the remote is not sold separately. You might want to google and keep an eye out on auction sites, someone could be selling their speakers system. I will have to leave this thread for others to chime in.

I-Trigue 2.0 speaker system

Does this speaker system need to be plugged into a computer to work? Or can it be used anywhere just by itself?

Really!?! Thanks! Sorry, the model was the I-Trigue 2300. That's great, thanks for replying! :smileyvery-happy:

Need informations about speaker systems

Give me best models in 2.1 speaker systems and 5.1 speaker systems

best 2.1 system from creative: i-trigue L3800
best 5.1 system from creative: megaworks thx 550
but if you really want to buy 2.0/2.1 sets: buy big ones (personally i use 976 advents with 2" woofers in them they give like 250watts per channel and they never broke)

How can I get permission to use Apple's Airplay Technology for new and innovative Speaker System?

Hi there!
I want to integrate Airplay technology in a new and innovative Speaker System.
I've searched the internet, but couldn't find anything.
Does anybody know how to get the permission to use it?

Apple
1 Infinite Loop
Cupertino, CA 95014
408.996.1010
...ask to speak to someone about licen$ing.

Can I use a new ipod touch in an old dock/speaker system

I will be in the states soon and thinking of getting and I pod touch the 5th edition. However I have an older dock/speaker system and wonder will it work in it. I have heard that you have to buy an adaptor. Is this true and are they easy to get and how expensive are they. Also is there any issue with buying one in the states and using it in Europe

http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=72
is the lightning to 30 pin adapter. There are some third party ones out there, but not a ton. If you go for a third party one go for a name brand not a no name generic.
If you want to buy one, look for a retailer with a good return policy so if it doesn't work you can take it back.
As to world wide use, shouldn't be a problem. The only thing you need to worry about is making sure you have a plug adapter if your charger is rated for world wide voltage, or making sure you have a charger that can handle the world wide variances in power. (Usually rated 100-240V in the specs)

How to play songs from an iphone on a speaker system without a computer

Hi,
i am new to this.
i wanted to know, how can i play the songs from my Iphone on a amplified speaker system without any Computer. I can use a airport express.
Is it possible.
Thanks
PJ

i wanted to know, how can i play the songs from my Iphone on a amplified speaker system without any Computer. I can use a airport express.
Sorry, but at present, there is nothing available for the iPhone or iPod Touch to stream audio (via AirTunes) to an AirPort Express Base Station (AX).

Can I use my new iphone 5 with the old iHome iD9SVC Speaker System if I get an apadter? or should i just buy new speaker system made specifically for the iphone5

can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?

Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

A solution to the S750 speaker system problem

Well my s750 died just like everybody elses. But after creative wanted me to pay 75% of my purchase price, I found a better solution. Nope, I am not fixing the unit like you guy's. I do not see the need to fix a poorly design system! I am not sure if creative or indigo/bash/blade audio is to be blamed. But if I had to pick, I would say "indigo/bash/blade audio". Years ago before blade audio became indigo, I had a chance to visit their location in ontario Canada. This was just when they stop making the blade audio car amps.
While I was there, I happened to see this long list of brand names they had started to make amp modules for. Names like Harman International, Klipsch and so on. Anyway I cast the blame on indigo for this reason: Some years ago I had purchased a set of "harman international" infinity IL series speakers. Like our creative s750, the infinity shares a bash powered subwoofer system. And just like the s750 the infinity subwoofer like to blow up too! In the case of the infinity, the power supply was the weak link. The amp module in the infinity at that time, was built just like the blade audio car amps before. Which in my opinion is a much better design than what is being used in the s750. I remember one of the sale guy at circuit city at the time saying, "I wish we would drop this model". He went on to tell me the failure on the powered units were very high. You know there is a problem when the mid level Creative Inspire T7700 7.1, out last the flagship s750. Now, whats my better solution you guy's want to know? Two words , Simplifi Digital! The 7075a 7.1 amplifier along with Definitive Technology Pro Sub1000 and the remaing surround speakers from my s750 system. Yes, it did cost me more to go this route. But what I now have is a much more reliable system. And a sound that the s750 can only dream about. My s750 died while I was listening to Dave Bruebeck quartet "take five" at mid volume. With my current setup, I can listen mid volume all day long with no hiccups.
For those who my have the cash to spend. I recommend looking at my direction!? Keep this in mind, make sure whatever powered subwoofer you choose, is adjustable up to 50hz. The creative surround speakers dont play very well below 20hz. Also make sure whatever powered sub you choose don't use a BASH amplifier. For those looking at the s750 as a purchase, good luck. Or go over to partsexpress.com and get the Dayton Part Number 300-670, surround speakers. Then get the simplifi digital 7075 7.1 amplifier and power subwoofer of your choice and make a better/best system. Sorry Creative Labs! This post is NOT intended to cast negativity. I use and like the products you offer. I just do not like the s750, and the reasons are all over this forum and elsewhere on the net. I currently own 3 audigy 2zs sound cards, three Inspire t7700 speaker system, three sound blasters modems and yes, one defective/dead s750 speaker system. If anything use this post as a positive to what Creative Labs could offer in the future. A system like I now have, sure would be nice with the Creative name all over it.
Victor
Creative Labs end user

My system specs below. What I have now simply blows the S750 away. And this is mated to my Audigy 2zs card. I am tempted to try my Terratec Aueron 7.1 universe which does sound better than my 2zs. The Simlifi Digital amplifier is one serious unit. This amp has one HUGE toroidal transformer inside of it! I was able to see it thru the vents on top of the cover. Definitive Technology ProSub 1000 Subwoofer Specifications:Complement: One 10" woofer with polymer cone coupled to one 10" infrasonic radiator
Amplifier: 300 Watts RMS
Speaker Level High-Pass
Filter: 6 db/octave (80 Hz)
High-Level Low-Pass Filter: 24 db/octave continuously variable (40 Hz ~ 50 Hz) plus unfiltered LFE direct coupled input
Frequency Response: 8 Hz ~ 50 Hz
Simplifi Digital 7075, 7.1 Channel Surround Amplifier
Detailed Specfications
Power Output: 50 W/ch RMS, 8 ohm ( kHz sine wave, all channels). 70 W/ch RMS, 6 ohms ( kHz sine wave, all channels) 75 W/ch RMS, 4 ohm ( kHz sine wave, all channels) 75 W/ch Peak, 8 ohm (music) 100 W/ch Peak, 4 ohm (music)
Frequency Response: 20Hz-20kHz (+/-0.2db over the entire frequency range)
Total Harmonic Distortion: <.03%, 50W RMS, 4/8 ohms, 20Hz-20kHz
Line-level Audio Inputs: V RMS (2.83V P-p) yields full power out into 8 ohms
50k Impedance
8 RCA inputs
Subwoofer output: Pass through (non-buffered)
AC Power: 0-25 VAC at 5A
Dimensions: 7.2"(width) x 3.9"(height) x 7.7"(depth)
Weight: 33 lbs
PRODUCT DESCRIPTION
The perfect audio solution for your Media Center or traditional PC. Use the Simplifi Amplifier with a Media Center PC, and get clear, powerful audio in your living room without needing yet another remote. Connect the Simplifi Amplifier to a traditional PC and hear how good your computer's audio can be.
Features
Class A/B Hybrid Design provides power and audio fidelity
Simple Rear Panel Connections make setup easy
Power Sensing Technology turns amplifier on/off with PC
Volume controlled through PC
Media Center Power Plug
Advanced Spike Protection
Fan cooled

IPhone 4 - Pioneer Speaker System No Longer Works After Firmware Update

To Whom It May Concern,
I recently updated the firmware on my iPhone 4 from 4.1 to 4.2.1. Unfortunately, as soon as I did that my Pioneer (XW-NAV1K-K) Speaker System no longer works with my iPhone. Are there plans on correcting this in the next firmware?

Me again, THANKS FOR HE TALENS well it kind of worked, but I had one chance and have not seen it since but all the root, or iCloud, basically all keychains might have been rest to defaults, but if I try a password, it hakes and says incorrect, the apple id worked though?!?
NIGHTMARE AND NEED THI FOR WORK, last backup (from apples time machine, not sure how old.
Your or anyones HELP! is greatly appreciated!

Speaker system no longer recognizes my ipod

Wondering if others have run into a similar situation and if there's an easy fix -- I have previously used an Altech-Lansing speaker system with my iPod classic very successfully. Now all of a sudden when I connect my iPod it tells me the accessory is unsupported. I can't seem to get it to work at all. Only change is that I recently added some songs/updated my library, but wouldn't think this should affect anything.
Would be very happy to get feedback from anyone out there who has encountered something like this recently...

Perhaps something in this article can help: iPod does not appear in iTunes or iPod updater in Mac OS X Products Affected
Have you tried a simple hard reset of the device with it still connected to your Mac? To do this, first make sure the hold switch is in the off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

Need help connecting new HDTV to an old 5.1 speaker system

I have an old Creative 5.1 speaker system that I want to connect to my new HDTV, and I am not sure how to do it in a way that preserves the 5.1 surround sound.
My new TV only has two options for audio out:
1. Optical/TOSLINK
2. 3.5 mm jack (labeled "headphones")
My speaker system has three options for input:
1. SPDIF (a single RCA connector)
2. 9-pin DIN
3. 3.5 mm jacks (two of them, labeled "Line In" and "Rear In")
The manual for the speaker system is here:
http://download.cambridgesoundworks....s/DTT2500D.pdf
How do I connect my speaker system to my TV while preserving the 5.1 surround sound?
If I simply connect the TV's headphone output the the speaker system's "Line In", then I won't get 5.1 surround, right -- only stereo?
Is there any way to convert the TV's optical/TOSLINK output to SPDIF (a single RCA connector) or 9-pin DIN?
Thank you for your help!

I have an old Creative 5.1 speaker system that I want to connect to my new HDTV, and I am not sure how to do it in a way that preserves the 5.1 surround sound.
My new TV only has two options for audio out:
1. Optical/TOSLINK
2. 3.5 mm jack (labeled "headphones")
My speaker system has three options for input:
1. SPDIF (a single RCA connector)
2. 9-pin DIN
3. 3.5 mm jacks (two of them, labeled "Line In" and "Rear In")
The manual for the speaker system is here:
http://download.cambridgesoundworks....s/DTT2500D.pdf
How do I connect my speaker system to my TV while preserving the 5.1 surround sound?
If I simply connect the TV's headphone output the the speaker system's "Line In", then I won't get 5.1 surround, right -- only stereo?
Is there any way to convert the TV's optical/TOSLINK output to SPDIF (a single RCA connector) or 9-pin DIN?
Thank you for your help!

My iPod Nano 6th generation iLive speaker system quit on me and now I cannot find a compatible speaker system. I don't want tiny personal speakers, I use this for music in the family room.

I have 2 iPod Nano 6th generation. I had them setup with different music from iTunes and I had an iLive Bluetooth docking and speaker system that charged and played them with speakers spaced in the family room. Not a little personal setup but for reasonably loud music for the whole room. My iLive system died on me. It had the 20 pin place to plug in the iPod nano and a clock and the two speakers that were bluetooth. It was the perfect setup for me. Now that model has been discontinued and I cannot find anything like it. Does anyone know what a good option is? These iPods are only a couple of years old and now obsolete because they don't make anything to play them on. I don't use earbuds, it's not what I bought them for. One has our jazz music collection, the other has Christmas music. I want to hear it throughout the house.

Sorry typo it had a 30 pin place to plug in the iPod Nano

I-Trigue L3450 Speaker System

Similar Messages

Maybe you are looking for