I-Trigue L3500 with DDTS-100

Can I combine DDTS-100 with speaker I-Trigue L3500?

Vvien,
The DDTS-100 speakers are meant for use with 5.1 / 6.1 / 7.1 speakers. If you're connecting from a soundcard, connecting analog speakers would offer no benefits. It is possible though, but you'll only be using one of the connections that is available to go to speakers, but it's set up to output sound for 5.1 speaker (or more).
Cat

Similar Messages

  • Creative inspire 5300 5.1 with DDTS-100

    Hello i'musing these set of speakers for 2.6 years and now decide tobuy decoder DDTS-100 but there is a problem ca't connect them and creative labs are saying this decoder is compatible with all speakers from creative !!!
    Any information how to connect will be wellcome many thanks
    Filipe Valente

    Just connect them using your speaker audio cable from the decoder audio outputs jack to the speaker system audio inputs jack. The decoder user guide should also cover some simple guide for connection too which you can refer to.
    Jason

  • Centre channel problem with DDTS-100

    I have a set of Gigaworks s750 speakers connected to my PC, PS3 and Xbox 360 via the DDTS-100 decoder; up until yesterday this was all working fine. Having moved some of the gear around to accomodate my new desk, I plugged everything back in and found that the sound from the front centre channel is muffled and/or quieter than the other channels.
    The speakers themselves don't seem to be the problem as the PC (which is connected via the switch box included with the decoder) sounds fine but the problem persists with both the PS3 and X360.
    My first thought was that I'd pulled one of the cables loose while rearranging the furniture but I've re-plugged everything in several times since with no joy. I've also tried changing the spdif cables and switching the sockets around, as well as removing the switch box and plugging the speakers directly into the decoder but nothing made any difference.
    Has anyone ever encountered anything like this before and/or could offer any suggestions?
    Any advice would be much appreceated.

    I finnaly found out my problem
    The buzz came out from my coax cable from my DVD. My DVD player was probably inducing 60Hz on the coax output.
    I switched to the optical output and no more buzz.
    I'll need to buy a new toslink cable to plug my x-box on the optical input #2
    Also I pluged my TV audio out in my st analog input, it also induced a 60 Hz on my DDTS-100. The decoder does not seem to filter out electric noises.
    I'm pretty happy to have found out my problem but I'm very dispointed that the DDTS-100 does not filter any electric noises.
    Mat

  • Help.. What sound card to go with ddts 100??

    HI everyone,?I just bought my samsung lcd tv and i am very anxious to get the ddts-100. But the problem now is: What sound card should i get? Get a Xi-Fi Extreme Music or just a cheaper soundcard will do since the decoding will be done by the decoder. Can anyone advise on this? I hope to spend lesser on the sound card but if it is really needed then i will get good one. Thanks.
    Regards,Kekin

    Bear in mind the DDTS-100 will only decode Dolby and DTS (and their varieties). That is, it will happily decode the surround from a dvd (assuming your soundcard and software passes it over the digital) but it will only get stereo when gaming or using CMSS for music.
    So, the DDTS-100 is a great partner to a standalone dvd player, games console, and whatever else you have hooked up to the tv. It will also play nice when watching dvds on the pc. It has a good upmixer for music and stereo tv too. If thats roughly what you had planned then it will fit that role nicely. Its also more convenient than switching manually over to the pc (with the switcher box) when you want to use it instead of the decoder.
    If you were planning to do everything on the pc then it may be a bit pointless as your soundcard and software could do it all instead. Also, i suspect the quality will be better from a decent X-Fi than the DDTS-100 but havent got around to doing a comparison yet.

  • Help connect X-fi Elite Pro with DDTS-100 and Gigaworks s750

    Hi,
    I purchased a brand new Gigaworks s750 speakers system, DDTS-100 decoder and X-fi Elite Pro. I connected the DDTS-100 and Elite Pro using Optical Fibre output from the audio console of X-fi Elite Pro to the optical digital input of DDTS-100. With the cables supplied with s750, I connected it to the Decoder DDTS-100. The problem is I am not getting any sound from the rear speakers and the front speakers. Only the centre speakers and the side speakers are producing sound. I could hear loud hissing sound and very very low volume of the music from the front speakers and no sound from the rear speakers. I can hear good quality sound from the centre speakers and average quality sound from the side speakers. What could possibly have gone wrong with my setup ? Somebody please help me. Thanx in advance.

    Hi Richie,
    Thanq for your response. But unlike what you have mentioned, ("what may be happining is the soundcard is decoding the signal and then the ddts is trying to decode it with disatrous results"), In my setup the signal is not getting decoded two times, once by Soundcard and once by the DDTS-100. As I have mentioned that I am taking out an Optical Signal from the sound card to the DDTS-100, the signal comming out from the sound card to the DDTS is Encoded signal only. So there doesnt arise a chance that the signal is getting decoded twice. Can you think of any other reason why my setup is not working? Please let me know.
    regards,
    Rahul M

  • Hum problem with DDTS-100 with Klipsch Promedia 5.1

    I have a problem with me decoder DDTS-100 since the beginning. I use it with Promedia 5.1 Klipsch kit.
    When I use digital sources either optical or coax, when my decoder does'nt receive any signal from my DVD or X-box, I am earing a big hum coming out from my speakers. And then when my DDTS-100 receive a digital signal the hum disapeer.
    I am not earing the hum when I use the analog input.
    I am very disapointed about this bug because when the volume is high I am worried about my Klipsch kit.
    Thanks in advance
    Mat

    I finnaly found out my problem
    The buzz came out from my coax cable from my DVD. My DVD player was probably inducing 60Hz on the coax output.
    I switched to the optical output and no more buzz.
    I'll need to buy a new toslink cable to plug my x-box on the optical input #2
    Also I pluged my TV audio out in my st analog input, it also induced a 60 Hz on my DDTS-100. The decoder does not seem to filter out electric noises.
    I'm pretty happy to have found out my problem but I'm very dispointed that the DDTS-100 does not filter any electric noises.
    Mat

  • Upconvert Stereo to Five Channel with DDTS-100?

    I'm using the DDTS-100 to share a speaker system between Windows Media Center and a Dolby Digital enabled high definition DirecTV DVR. I don't find any control that allows you to upconvert a standard two channel audio source to a five channel system. On Windows media players, this is a standard feature. In Windows Media Player they call this "SRS Wow". On the Creative Audigy setup they call this CMSS. This is probably the single most basic feature I would expect any Dolby decoder to offer, as a way to offer a cheap expansion of low quality sound sources, to at least fill all the speakers with some kind of sound balance.
    Is there any way to get the DDTS-100 to expand a two channel source to five channel? I tried all of the modes for output, and none of them did this. Quite bizarrely, there is a mode that lets you upconvert a five channel system to six channel. How they could have remembered to implement something that esoteric but have forgotten to implement a two to five channel conversion (which would benefit about 95% of the potential market for the product) is strange.

    It appears that the Neo:6 setting is working well on most two channel content to upconvert to five channels. But it just by bad luck happens that the content I was originally using (a Spanish language channel 429 on DirecTV) does *not* upconvert to five channel but remains on two channels. Would this indicate the source is mono rather than stereo? Will Neo:6 only upconvert two channels to five and have no effect at all on a mono source?

  • Annoying Buzzing with DDTS-100

    Hi,
    I have had a set of T-7900 speakers for about 6 months now and I've has no problems with them. They were being used in conjunction with an Audigy 2 ZS.
    I decided to purchase the DDTS-100 decoder for my other devices to use the speakers. But when I have it all setup on the speakers on there is a loud buzzing sound. For those of you who have the DDTS-100 you will know you can switch between PC and source. When I flick it to decoder the buzzing stops.
    Any ideas what's causing this?

    i have the xfi xtreame music and the g500 get great 5. sound on movies and games.dont need anyting else hope this hel
    ps.

  • Dolby Digital with DDTS-100

    Hi,
    I recently just got HDTV and connected it to my DDTS-100 (which is connected to the Gigaworks S750). However, all channels which have 5.1 surround sound (confirmed with cable company - doesn't mean they aren't lieing/don't know what they're talking about) make the the DDTS-100 illuminate the Dolby Digital light (as expected), but also the "Stereo" light (making me think I'm only getting a 2.1 signal). The end result is that I only get sound out of the sub, FL and FR. If I use any of the matrix modes I "lose" all the voices (i.e. apparently no centre channel decoded).
    I've tried hooking up the Gigaworks S750 directly to my 7.1 soundcard and all speakers work fine. I've also tried every combination of upmixing available on both the DDTS-100 and the Gigaworks S750. I've also tried using Optical and Coaxial sources from the HDTV box. I also have a GameCube which appears to work perfectly fine on the Pro-Logic mode.
    Is there something special I need to do with the DDTS-100? Any way of confirming that the signal is in fact 5.1

    plz reply

  • Creative inspire 6700 with DDTS-100 ??

    Hi there,?I have the creative inspire 6700 speaker system connected to my PC (audigy2 audiocard) andit works fine. Then i saw the DDTS-100 decoder on the website and it looks like the thing i need.So, it's possible to connect my 6700 system to the DDTS 100 ?and then i can use a digital in/out to the DDTS system and then it will work ?(i have a dvd player that i want to connect)?Greetz,...

    I am sorry but i am new to these forums and i am actually looking for help myself. I have the creative 6. 6700 speaker system and just today dropped and damaged the casing to one of the sattelite speakers. I have searched the internet to see if i can get another speaker or another set. Can you help me. Im in Scotland in the uk but if there is a place i could contact to buy from that you know i would appreciate it. i will see if i can help you soon.
    Thanks.
    mark.

  • GigaWorks S750 with DDTS-100 Decoder - Center/Sub channel not working.

    I have the S750 with the DDTS decoder and everything was working fine until the other day. I have tested several times and from what I can tell there is no signal being sent from the sub to the decoder from the Center/Sub channel wire (S750 sub) to the decoder. Plugging the center speaker wire into the left speaker jack will produce a test signal so I know it is not the speaker. Seems the sub has gone out along with the center channel. I checked the fuse and all is well. Please help...
    Message Edited by aosbeck on 04-15-2008 06:19 PM

    shin8,
    Are you getting proper output if you use the "TEST" button on the remote control?
    Daniel

  • Connection DTT3500 Digital with DDTS-100. Pls Help me.

    I want to connect my speakers (DTT3500) with the decorder DDTS-00. How to connect them and how to setup my system to play DTS. Please analyze. The soundcard is Audigy 2 ZS.
    Thank you in advance,
    Ilias

    Unless I am terribly misinformed those speakers uses a digital connection. So there is no way to connect them to the DDTS unless they also accept analogue connections.
    Though, please don't take my word for it since there might be some magical converter but I have never heard of such a thing.

  • XFI with ddts-100 combinat

    I just don't clearly know below item:
    - In case I use XFI with progamer G-500, do I need DDTS-00 decoder?
    Maybe I'm wrong, but I think no need, because XFI will decode DD and DTS for G-500.
    If not, why?
    - In case I use XFI with Logitech Z-5500, do I need DDTS-00 decoder?
    Maybe I'm wrong, but I think no need, because Z-5500 built-in decoderwill decode DD and DTS by itself.
    If not, why?
    Could you describe in detail for me?
    THanks

    i have the xfi xtreame music and the g500 get great 5. sound on movies and games.dont need anyting else hope this hel
    ps.

  • Anyone using Logitech Z-5500 Digital with DDTS-100?

    Topic pretty much says it all.
    What are your experiences?

    It is now on "6 Ch Direct", but there`s still no good sound from the center and rear speakers. Do I need to change the sound blaster, because when I play with its software the sound is always different?

  • DDTS-100 and Apple Powerbook

    My question is, since Apple PowerBook has a normal stereo output (for headphones, stereo speakers, etc.), would I be able to connect it with DDTS-100?
    I have Creative Inspire 5300 (5.1 speakers) and I'd like to up-mix all content that will be playbacked on my PowerBook (music, movies...), but I don't know if PB and DDTS-100 connection is possible (couldn't find any back image of the decoder). I saw a switch box, but I'm not sure if that is packed together with the decoder, which looked promising and I think that it would work as I want it to.
    So, if anyone could tell me which cable do I need to connect those two (I don't know all those names, RCA, 3.5 mm, whatever it's all called) and if it will all work as I imagined, I'd be very satisfied, because I'm planning to buy DDTS-100 (since PB has only stereo ouput and I don't want to give up surround sound).
    I hope someone can understand what I want, if not... well, guess I'll have to try harder.

    danijelr5,
    Yes it should be able to work fine. You can find the user guide for the DDTS100 via here. The guide have those images you need. The cable you will need is the minijack to dual rca cable.
    Jason

Maybe you are looking for