I try to connect the Qosmio F20 to TV
Hi,
I am trying to connect my laptop F20 to TV.
By using S-Video - Composit cable
shown in pic blew :-|
http://aycu32.webshots.com/image/21471/2000131229832581606_rs.jpg
Prepose: to see view in my laptop into TV.
But infortunaly does not worke with me.
Could you help me please ?
hi. try to get a s-video scart cable like this one:
http://www.redcoon.es/index.php/cmd/shop/a/ProductDetail/pid/B105731/cid/9016/Monster_Cable_S_Video_Scart_THX_2M/
then with the laptop power off, connect the s-video to the "s-video out" port of the laptop, and connect the scart to the tv. power on the laptop and the tv. when operating system is fully loaded, click on the magic button (buttons bellow the screen) monitor out (with the symbol of a tv and an arrow going to the right) and click on the tv set remote control to AV.
now whatever you were seing on the laptop should be seen on the tv.
Similar Messages
-
When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?
The problem has been fixed with the most recent OS X software update.
-
If an iPod is stolen, can you track it when they try to connect the iPod to another computer?
If an iPod is stolen, can you track it when they try to connect the iPod to another computer?
No. You can only track it if you had setup the FindMyiPhone feature and some other constraints.
-
Two of our ipod touches won't connect to the home wifi. They have done before. All other apple devices connect fine. They can see the wifi devices, appear to try to connect (the circle whirls around) but connection doesn't complete. Ideas please?
I have 2 of them that only connected for a day and then reset network settings and they connected again for a day now resetting network settings does not fix it either. My iphone used to work with my home network but after upgrading to the latest OS which is the same versions as the ipods it no longer works either. Acts the same as the ipods. It would seem that the latest tweeks to the OS is the problem with wifi connectivity.
-
Where do i find the Qosmio F20 online manual?
I would like to watch movies through my qosmio but using my tv for screening.I tryed fn and F5 but nothing appeared on my tv, laptops screen went black though.
Hi
You have to change also the right channel on the TV. If you have connected the notebook with the s-video out port so you have to enable it on the TV.
If you want to download the user manual for Qosmio so please check this:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp -
How to enter to BIOS for the Qosmio F20-137
F1-F12 which key enter to bios, if i want doing something at bios setting.
Qosmio has Toshiba BIOS and every unit with Toshiba BIOS can be enter using ESC > F1 key.
Some Toshiba units have Phoenix BIOS and it can be enter using F2 button at the startup. -
Is this an airport express problem?? Only Youtube and google doesnt work. Its not work only on wifi from airport express. I really have no idea about technical problem.
After the last upgrade, my itunes doesn't open (this happen only the first time after the start of my pc). It seems frozen.To re-open Itunes i need to terminate APS deamon every time from task manager.
What is Apple doing to solve this problema? Thank you. -
I have a jetpack, and when I try to "connect" to my ipad or phone, it keeps telling me I am not using the correct password. I have tried everything. I even changed the password, nothing is working. Both are 4G, my ipad is an Air and my phone is a Iphone 5. I can get connected to other wifi on these features but not with my jetpack. Please help, I need to use this feature soon. Thank you so much
Chances are you mis-typed a character in the Wifi password and the devices saved that information. Now whenever you try to connect the device refers to the wrong password and the Jetpack does not accept your connection. Tell your devices to forget the wireless connection and start over.
Once you enter the proper WiFi credentials the Jetpack will allow you to connect. -
Questions about remote control and infrared port Qosmio F20
Hi again,
My Toshiba Qosmio F20 comes with a remote control funcioning through a infrared device on the front of the computer.
Regarding this I have 2 questions:
1. How do I configure additonal functionality through the remote control? (Like launching and controlling Winamp?)
2. How do I connect other devices, like my cellular phone, pdas etc., to the infrared device on my computer?
Kind regards,
VegardHi,
the Remote Control delivered with the Qosmio F20 is designed only for Windows XP Media Center Edition (all Remote Control's which are designed for Windows XP Media Center Edition work only with Media Center or Windows Media Player). Other program's like Winamp were not supported by these Remote Control's.
I believe, the Remote Control's are made by Microsoft and for a wide palette of product's (the Infrared Transceiver is on nearly all Media Center PC's e.g. Siemens-Fujitsu, the same). So it's a little bit tricky to support more program's then Media Center or Windows Media Player.
For other program's you need a second Remote Control like this one:
http://www.logitech.com/index.cfm/products/detailsharmony/GB/EN,CRID=2084,CONTENTID=9193
br, Ben -
Qosmio F20 - Built-In HDD error
My F29 took a hefty knock today around the HDD area on the forward right,while my kids were playing around. In hefty i mean that when it got knocked it unclipped the speaker panal near the sreen.
For a while it continued to work but about 10 mins later i got a blue screen with a load of text and then it just restarted.
During the boot up screen a error came up saying "Built-in HDD error".. Now i checked the connection and they seem solid enough. is there anything that i can do to get my system working again?
Thanks in advance
JHello
You can check this yourself ;)
On the bottom side of the notebook you must only remove the HDD cover that is secured with one screw as far as I know. Remove the cover and then you can see what type of HDD it is.
Anyway, as far as I know the Qosmio F20 was equipped with IDE HDDs. That means due the 28bit LBA limitation you can use HDDs up to 128GB.
So I think a HDD with 120GB would be best solution.
Greets -
Qosmio F20-136 - Boot from USB Hard drive
Dear All,
Is it possible to enable the Qosmio F20-136 to boot from a second hard drive connected one of the USB ports? I know that you can hit F2 during the boot to get 4 different boot options, but this isn't one of them.
ThanksHello
As far as I know it is not possible and I didn?t find any topic where someone can confirm this possibility. Anyway it will be very nice if something like that can be possible. -
When I try to connect the files to the catalog on the Mac, many (~9000 out of ~12000) files show as can not reconnect. Elements finds "similar" files (actually the files I want) but says they are not the same file. I noticed that many of them have the time parameter different in the file compared to the catalog. If I go ahead and say reconnect anyway, I get another error indicating the the data has been changed by two different sources. If offers the choice of overwriting the file data with info from the catalog (which loses the EXIF data in the file) or says leave the file alone (which loses the keyword metadata from the catalog). Is there any way to get Elements to connect all of these files while retaining all of the EXIF and the keyword metadata without having to re-edit or re-import each of these files? My ultimate aim is to then move all of these photos into the current version of Lightroom on the Mac.
You won't like this response, but there is no way to simply move any Adobe software installation from one system to another. In part, this has to do with the registration/activation infrastructure that Adobe uses. FWIW, Adobe isn't the only software vendor for which you can't simply move software from one system to another via various migration tools.
You must totally uninstall from the first system including product deactivation and then install on the new system and reactivate.
In terms of “fixing” your current system, I would recommend totally uninstalling the software (and deactivating in the process), reboot, and then reinstall from scratch.
- Dov -
Unable to connect the server, while open the rpt file in server from java.
Hi,
I have written one java class, that class deployed in solaris server. The BO server is avilable in another solaris server. i want to convert the rpt file to pdf format. for that i try to give the file path to the server for opening the rpt file, that time i got the follwoing error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException:
Unable to connect to the server: uinbrdcsap02. --- Connection refused
(errno:239)---- Error code:-2147217387 Error code name:connectServer
at
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwR
eportSDKServerException(Unknown Source)
at
com.crystaldecisions.proxy.remoteagent.TCPIPCommunicationAdapter.connect
(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.z.a(Unknown Source)
at
com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Un
known Source)
at
com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initia
lize(Unknown Source)
*My java code is the following ..*
package com.ramco.report;
//Crystal Java Reporting Component (JRC) imports.
import java.io.File;
import java.io.FileInputStream;
import java.io.ByteArrayInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.io.ByteArrayOutputStream;
import java.sql.Connection;
import java.sql.CallableStatement;
import java.sql.Statement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.text.SimpleDateFormat;
import com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat;
import com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions;
import java.util.Calendar;
import java.util.Properties;
import org.apache.log4j.Logger;
import org.apache.log4j.SimpleLayout;
import org.apache.log4j.FileAppender;
import java.net.InetAddress;
import java.net.UnknownHostException;
// Class file starting.
public class StandardReconReport
private Connection objConnection = null;
private DBConnection dbconnection = null;
private ByteArrayInputStream byteArrayInputStream =null;
private FileOutputStream fileOutputStream = null;
private ByteArrayOutputStream byteArrayOutputStream = null;
private CallableStatement callablestatement = null;
private CallableStatement callablestatement1 = null;
private ResultSet resultset1 = null;
private ResultSet resultset = null;
private String Deal_No = null;
private String Job_Date = null;
private String Reportservername = null;
private SimpleLayout layout = null;
private FileAppender appender = null;
private Logger logger = null;
private String DateTimeFormat = null;
private String Report_File_path =null;
private String Pdf_File_Name = null;
private Properties properties = null;
private String LogFilePath = null;
private String FileName = null;
private String FullLogFilePath = null;
private Statement statement = null;
private String Report_upload_path = null;
private String StanReconDir = null;
private String winandsol = null;
private com.crystaldecisions.sdk.occa.report.application.ReportClientDocument reportClientDoc = null;
private int count_tmp=0;
private String DATE_FORMAT = null;
private String dateformat = null;
private Calendar cal = null;
private SimpleDateFormat sdf = null;
private String reconfilename = null;
// Method for Generating Report.....
private void stanReportGeneration()
try
properties = new Properties();
properties.clear();
properties.load(new FileInputStream("GeneralInfo.properties"));
Reportservername = properties.getProperty("reportservername");
reconfilename = properties.getProperty("reconfilename");
layout = new SimpleLayout();
LogFilePath = properties.getProperty("logfilepath");
dateformat = dateTime1(properties.getProperty("dateformat1"));
StanReconDir = properties.getProperty("stanrecondir");
winandsol = properties.getProperty("windowsandsolaris");
if (new File(LogFilePath).exists())
LogFilePath = LogFilePathdateformatwinandsol;
if (new File(LogFilePath).exists())
else
new File(LogFilePath).mkdirs();
FileName = "STANRECONLOGFILE-";
FileName = FileNamedateformat".txt";
FullLogFilePath = LogFilePath+FileName;
appender = new FileAppender(layout,FullLogFilePath,false);
logger = Logger.getLogger("MyLogger");
logger.addAppender(appender);
DateTimeFormat = properties.getProperty("datetimeformat");
logger.info("The Start Recon Report Start Time: " +dateTime(DateTimeFormat));
logger.info("");
try
InetAddress address[] = InetAddress.getAllByName(Reportservername);
for (int i=0; i<address.length;i++)
logger.info("Report Server Name: " + address<i>.getHostName());
logger.info("Report Server Address: " + address<i>.getHostAddress());
logger.info("Report Server Canonical: " + address<i>.getCanonicalHostName());
catch (UnknownHostException e)
logger.error("The host "Reportservername"is not avilable");
Report_File_path = properties.getProperty("StandardReconReportpath");
logger.info("The Report File Name is : "+Report_File_path " - "dateTime(DateTimeFormat));
//Report_File_path="rassdk://"+Report_File_path;
try
//Getting the Database connection....
dbconnection = new DBConnection();
objConnection = dbconnection.getConnections();
statement = objConnection.createStatement();
String sqlQuery = "SELECT TRIM(PARAM_VALUE) FROM SYS_USER_PARAM WHERE COMPONENT = 'REPORT' AND LINE_NO = 1 AND PARAM_NAME = 'REPORT_DOWNLOADPATH' AND STATUS = 'A'";
resultset = statement.executeQuery(sqlQuery);
while(resultset.next())
Report_upload_path = resultset.getString(1);
logger.info("Report_upload_path from the DB: "+Report_upload_path);
catch (SQLException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch(Exception ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
finally
if(statement!=null)
statement.close();
if(resultset!=null)
resultset.close();
if (new File(Report_upload_path).exists())
Report_upload_path = Report_upload_path+StanReconDir;
if (new File(Report_upload_path).exists())
System.out.println("Directory is avilable"+Report_upload_path);
else
new File(Report_upload_path).mkdirs();
Report_upload_path = Report_upload_pathwinandsoldateformat+winandsol;
if (new File(Report_upload_path).exists())
else
new File(Report_upload_path).mkdirs();
logger.info("Report_upload_path : "Report_upload_path" : "+dateTime(DateTimeFormat));
try
logger.info("Calling the REPORT_STAN_RECON_CON SP : "+dateTime(DateTimeFormat));
callablestatement = objConnection.prepareCall("{call REPORT_STAN_RECON_CON(?)}");
callablestatement.registerOutParameter(1, oracle.jdbc.driver.OracleTypes.CURSOR);
callablestatement.execute();
resultset=(ResultSet)callablestatement.getObject(1);
if(resultset!=null)
while(resultset.next())
count_tmp = count_tmp+1;
logger.info("");
Deal_No = resultset.getString(1);
Job_Date = resultset.getString(2);
DATE_FORMAT = resultset.getString(3);
Job_Date = Job_Date.substring(0,10);
logger.info("*********** PDF Convertion Starting for a Deal No: " +Deal_No " :: "dateTime(DateTimeFormat));
Pdf_File_Name = Report_upload_pathreconfilenameDeal_No"-"DATE_FORMAT+".pdf";
Job_Date = Job_Date.replace('-', '/');
logger.info("The Deal_No is : "+Deal_No " - "dateTime(DateTimeFormat));
logger.info("The Job_Date is : "+Job_Date " - "dateTime(DateTimeFormat));
try
reportClientDoc = new com.crystaldecisions.sdk.occa.report.application.ReportClientDocument();
reportClientDoc.setReportAppServer(Reportservername);
logger.info("Report App server Name := "+ reportClientDoc.getReportAppServer());
logger.info("Report_File_path := "+ Report_File_path);
reportClientDoc.preCreateServerAgent(true);
reportClientDoc.open(Report_File_path,0);
logger.info("After opening the RTF file for : "+Deal_No " Deal_No - "dateTime(DateTimeFormat));
callablestatement1 = objConnection.prepareCall("{call REPORT_STANDARD_RECON(?,?,?,?)}");
callablestatement1.setString(1, Job_Date);
callablestatement1.setString(2, Deal_No);
callablestatement1.setString(3,"");
callablestatement1.registerOutParameter(4, oracle.jdbc.driver.OracleTypes.CURSOR);
callablestatement1.execute();
resultset1=(ResultSet)callablestatement1.getObject(4);
String tableAlias = reportClientDoc.getDatabaseController().getDatabase().getTables().getTable(0).getAlias();
reportClientDoc.refreshReportDocument();
reportClientDoc.getDatabaseController().setDataSource(resultset1, tableAlias , "Result Set");
reportClientDoc.refreshReportDocument();
ExportOptions oExportOptions = new ExportOptions();
oExportOptions.setExportFormatType(ReportExportFormat.RTF);
byteArrayInputStream = (ByteArrayInputStream)reportClientDoc.getPrintOutputController().export(ReportExportFormat.PDF);
logger.info("After exporting the report file to PDF file for the : "+Deal_No " Deal_No - "dateTime(DateTimeFormat));
//Use the Java I/O libraries to write the exported content to the file system.
byte byteArray[] = new byte[byteArrayInputStream.available()];
//Create a new file that will contain the exported result.
logger.info("Successfully exported report to " + Report_File_path" - "dateTime(DateTimeFormat));
logger.info("*********** PDF Convertion Ending for a Deal : "Deal_No" "+dateTime(DateTimeFormat));
logger.info("");
Deal_No = null;
Job_Date = null;
catch (SQLException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch (IOException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch (Exception ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
finally
if(byteArrayInputStream!=null)
byteArrayInputStream.close();
if(byteArrayOutputStream!=null)
byteArrayOutputStream.close();
if(fileOutputStream!=null)
fileOutputStream.close();
if(callablestatement1!=null)
callablestatement1.close();
if(resultset1!=null)
resultset1.close();
if(reportClientDoc!=null)
reportClientDoc.close();
if(count_tmp==0)
logger.info("");
logger.info(" $$$$$$$$ There is NO DATA for generating the Report $$$$$$$: " +dateTime(DateTimeFormat));
catch (SQLException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch (Exception ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
finally
if(callablestatement!=null)
callablestatement.close();
if(resultset!=null)
resultset.close();
if(objConnection!=null)
objConnection.close();
if(callablestatement1!=null)
callablestatement1.close();
if(resultset1!=null)
resultset1.close();
catch (IOException ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
catch (Exception ex)
ex.printStackTrace();
System.out.println(ex);
logger.error(ex);
finally
properties.clear();
logger.info("");
logger.info("*******Standard Recon Report End Time*******: "+dateTime(DateTimeFormat));
// Getting the current date and time..
public String dateTime(String dateFormat)
cal = Calendar.getInstance();
sdf = new SimpleDateFormat(dateFormat);
return sdf.format(cal.getTime());
//Getting the Yesterday Date and time...
public String dateTime1(String dateFormat)
cal = Calendar.getInstance();
cal.add(Calendar.DATE, -1);
sdf = new SimpleDateFormat(dateFormat);
return sdf.format(cal.getTime());
public static void main(String[] args) {
StandardReconReport SR = new StandardReconReport();
SR.stanReportGeneration();
For the above code i given the report parameter from the property file.
reportservername=servername
datagenreportpath=rassdk\://C\:
MyEclipseWorkPlace
IDSREPORTGENERATION
REPORTFILES
STANDARD_RECON_REPORT.rpt
The code is working fin, while i try to connect the BO which is avilble in Windows server, but this is not working if the BO is avilble in solaris server.
Any bodies please help
Edited by: velmurugan.spn on Sep 12, 2009 6:38 AMHi,
Not able to find Report - Standard templates or Report - Custom templates view in Administration - BIP reports in Siebel 8.1.1.3?
We have applied 8.1.1.3 patch on 8.1.1.0
below are the steps followed
Reports are not generated after 8.1.1.3 patch installtion.
we have also followed to below steps mentioned for this issue in oracle support.
"In order to resolve this behavior it is necessary to ensure that the 8.1.1.3 FixPack has been applied to the Siebel Tools installation. This will provide an additional .zip file in the REPPATCH folder of the Siebel Tools installation. Once this has been done please then follow the configuration steps as documented :
change sysprefix to X_ before sif import and chage back to SBL_ after sif import.
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Once the above steps have been completed the Selected Record flag will appear in the Report Template Registration views."
we still not able to generated able to generate reports even after following above steps.
Thanks
Sean -
How do I post a message on the qosmio forum?
Hi, I see messages on the qosmio forum pages but no mention of "post a new topic" this is the only page I can see that allows me to post a topic. I wish to post a topic asking what cables are included in the qosmio f20-136 in UK as I seem to be missing an infra red transmitter cable and an antenna cable.
thanksHi Mike
I have seen that you have already posted in this forum. I assume you know this procedure. But please check this forum help:
http://forums.computers.toshiba-europe.com/forums/help.jspa
There you will find a decryption about the forum rules and other useful informations.
Nevertheless in the Qosmio section you can find this clue:
Click to review or to create a new Topic
There you will find a function to post new Topic.
Bye -
How to connect the wrt120n to android
My mother in law bought my daughter a impression android tablet for Christmas it connects fine at public hotspots but I can not get it to connect to our wrt120n router at home. I have tried everything I know to add it. It asks for the password then says getting IP address then disconnects. What can I do to fix this besides pull my hair out.
You can try the following:
# Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page.
# Then Click on wireless Tab select Channel Width to 20 MHz only and Channel to 6, 9, and 11. Click Save Settings.
# Click on wireless Security tab and lower down the security level of the wireless.
#Adjust the following advanced wireless settings:
~~ Lower the beacon interval from 100 to 50
~~ Lower the fragmentation threshold from 2346 to 2306
~~ Lower the RTS threshold from 2347 to 2304
After doing the following settings then try to connect the android tablet and check the connectivity..
Maybe you are looking for
-
BSP Error while selecting "campaign elements" in spanish --- crm 2007
Hi experts, I´m trying to look for a solution for a problem with an error that occours while selecting in WEB UI --marketing --- campaign elements , in spanish language. Error Business Server Page (BSP) <thtmlb:textView>: (design) The Attribute Value
-
Balance Sheet Report in OBIA 7.9.6
Hi, We are using OBIA 7.9.6 and exceuted the finance execution plan.It Ran sucessfully. When we open balancesheet report there's no data.After we checked in session log and found the below query select D1.c1 as c1, D1.c2 as c2, D1.c3 as c3, D1.c4 as
-
My MacBook Pro has become extremely slow
Overnight my MacBook Pro (2012) has become very slow when trying to complete any task. I have plenty of space left and have emptied my trash but the problem persists. For added detail, I did just get an iphone which may be slowing my computer down th
-
Temperature controlled cooling for K7N2G - making a cheap and quiet sy
Hi! My CPU and IGP fan speed is temperature controlled. The two fans in my PSU are very quiet. Beside these i have two fans blowing air into the cabinet and two fans blowing air out. At the moment I have the option to let them stay turned off, to giv
-
Failed but blocking corelation after upgrade
I see lots of failed but not blocking correlation events in the queue after upgrading from Project Server 2010 to 2013, there does not appear to be any user impact, but want to ensure there is no larger issue. General•ProjectHasNoWriteLock:◦ProjectHa