I try to install mac osx 10.5.6 on my powerbookG4

my powerbook G4 1.67ghz have a problem when i try to install new hdd with OSX 10.5.6, a massage box come out " Mac OS X cannot be installed on this computer". After using disk utility to format new HDD, i try again to reeboot but the same massage will come out. Anyone can help me to install the OS X on my Powerbook G4?

Mac OS X 10.5 Leopard installation system requirements
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
MB427Z/A Leopard 10.5.1 install DVD
MB576Z/A Leopard 10.5.4 install DVD
MB021Z/A Leopard 10.5.6 install DVD (single user)
MB022Z/A Leopard 10.5.6 install DVD (5-user family pack)
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
The DVD should look like this
Caution - Leopard does not support classic mode. So, if you currently open OS 9 apps in classic mode, you won't be able to do this if you upgrade to Leopard.
 Cheers, Tom

Similar Messages

Cannot install mac OSX lion v.10.7 on mac mini

I try to install mac OSX lion v.10.7 but they say u need atleast 2GB of memory in HD Machintosh, but i have more enought memory already.

Hello, perhaps you're confusing RAM Memory with Disk Space?
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Installing Mac OSX Leopard Server 10.6 on a Mac Air

Hi
Im trying to install Mac OSX Server 10.6 on a Mac Air which have Lion developer preview 4 on it, i try to install from
a .dmg file thats stored in the downloads folder when it runs it give me a message "resturt to begin installation" with a
restart button, i click it and then computer restarts and nothing happens why ?
also the server file is big 7 GB so i failed to burn it on dvd or copy to external hard disk and install from there

You will want to use a external double-layer (DL) DVD disk that you've recorded, or use an external disk configured to boot the distro.
Also make a full backup of your boot disk before you load this, as there is no "downgrade" option to get back to whatever version of Snow Leopard client you might be using on the box.
Please (also) read the HT4313 support article.
And for completeness...
This particular configuration isn't supported by Apple.
Mac OS X Server doesn't "like" DHCP addressing, and that can be common on portables.

Can i Install Mac OSX Leopard 10.5 /10.6 ?

Hello guys,
I've bought about 3 weeks ago an iPhone 3G. Since i have my iPhone i like to produce software for the iPhone with the developers kit from apple. But i have one problem. I have an Acer Aspire notebook with:
4GB memory
Intel Processor (2,2 GHZ)
Ati Videocard
Windows Vista Premium
Can i Install Mac OSX on this notebook ? Maybe with dual boot.
Best Regards,
Theodoor de Wit

A slightly different perspective from what others have already posted:
Even assuming there were no licensing/legal problems with this & you could somehow successfully hack the OS & SDK to install & run on your Acer, would you really want to try to use that as a development platform for iPhone apps? It would be like trying to build a sturdy house on an uncertain foundation: you would never know if or when the whole thing might collapse or how to tell if the fault was in what you built or not.
If you want to develop for the iPhone, invest in a Mac. If you are any good at it, judging from the success stories you could quickly & easily make back the cost of that investment & much more. Even if you don't, you will have a very well made & supported computer running what is arguably the most stable & user-friendly OS on the planet.

Can not install Mac OSX Update Combo10.4.5 PPC

I have a clean installation of Tiger on a Power Mac G4 (AGP graphics) with Sonnet 1 ghz processor upgrade, updated to 10.4.3 by running Software Update. No other updates available at this time.
So I downloaded MacOSXUpdCombo10.4.5PPC.dmg and it stops at "Select a Destination."
"You cannot install Mac OSX Update Combined (Power PC) on this volume. This volume does not meet the requirements for this update."
I must have installed this update previously, to get to 10.4.6, to install Adobe CS3 which REQUIRES 10.4.6.
Now I can't figure out how I got this update installed - sorry if this has been posted previously.
This isn't my main machine, thankfully, but I use it as a spare in the studio to transfer images to.
Can anyone help me get this OS updated to 10.4.6?
I don't have the original processor, so re-installing it isn't an option.
Thanks.

No, I wouldn't ignore them, I think we really have more messed up than just this, and if any of these steps fix it, we'll likely need new downloads.
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If all the above fails, then it appears to be time for an Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

Can't install Mac OSX via Internet recovery onto my new SSD

I just installed an SSD in my Macbook Pro 2012 (non Retina), but when i try to reinstall Mac OSX 10.7 via Internet recovery it doesn't recognize the new Drive (it does appear in disk utility when connected to another mac externally.) Please Help.

reinstall Mac OSX 10.7 via Internet recovery
The only folks who can get a free copy of Mac OS X 10.7 via Internet recovey are those who bought it previously. If you removed your old drive, and its Recovery_HD with your Apple_ID in it, how do you expect Apple to know who is asking for this download?
There are more reliable ways to do what you want to do.
Is you old drive still operable?
Do you have an external enclosure or another drive over 20GB?
Do you have another Mac?
Do you have a spare USB stick?

HT1893 After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?

After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?

Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software. If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.

Problem installing Mac OSX on my new MacBook hard drive...

Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)

Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies,

How to make a image file from Pre installed Mac osx ? "PLEASE HELP :("?

hey guys ..Thanks u for the time.
So i have this eMac which has crashed and i have got may hands on another eMac.. and it works
... the only problem is.. I can take my eMac to the working eMac to do Target Mode or any thing...
So Help me..
My question is .. Is there a way to make a .DMG image file from pre installed mac osx OR
Is there a way to may a recovery disc??

You can use Carbon Copy Cloner to copy everything from the working eMac onto the non-working eMac while the working eMac is running. If your eMac will still do target mode into the working one, you can download the above software, select the booted drive as the source drive, and your eMac's drive as the target, however it is possible this will not work.
When you say your eMac crashed, what exactly happened? It is possible that the hard drive in your eMac failed or is failing, so in order to get it running again you would need to replace the hard drive. On the eMac, this repair is somewhat involved, and you have to be very careful because it exposes the CRT, which has several areas which can be extremely dangerous to touch if not properly handled. CRTs retain a great deal of voltage, even when unplugged, sometimes for weeks, and they can give you a nasty shock if you touch them in the wrong place.
Also keep in mind that cloning from the working computer to the non-working computer will ERASE any data that you have stored on that eMac, so if you don't have it backed up anywhere, you may want to attempt that with target mode before proceeding.
Good luck!

HT1338 I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working, what can I do to fix's this?

I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working,what can I do to fix's this?

Run Software Update to get to 10.6.8 and update Java.

I want to go back to Snow Leopard but I get "you have to install mac osx.app 23.1.1

I have a new 21.5 iMac I just purchased July 9 so I was able to download Lion for free under the up-to-date program. After installing Lion I decided I wanted to go back to Snow Leopard for various reasons. When I restart with the original Snow Leopard DVD that came with my machine and holding the C key down, I get the window for Mac OS X install DVD. I click the icon to install SL and another window pops up stating "You can't use this version of the application. Install Mac OSX.app with this version of Mac OSX. You have to install Mac OSX.app 23.1.1" To answer the question before hand....I don't have a time machine backup.

Thanks for all your help guys. I had trouble with my first install of Lion, it seemed buggy and when I tried some of the suggestions you offered, my machine did not always react the way it should have. I thought that was weird because it's a new iMac, only three weeks old. Pondini pointed me in the right direction and I think Lion is stable now. This worked after a few tries, not sure why I wasn't getting consistent results but it worked eventually.
1. Shut the computer down.
2. Hold "command" and "R" and turn on the computer (I believe this is recovery HD from the internet because it wasn't working from my hard drive)
3. After a few unsuccessful tries, and repeating #1 and #2, I finally got a window to reinstall Lion. This took about an hour to download and after that things went as expected.
As long as Lion is more stable than it was on my first install, which it seems to be now, I'll just stay with it. After this experience, I would say "make sure you need the features in Lion, and that all your current programs are compatible with Lion before you forge ahead."
Thanks again

When I am re-installing the Mac OSX snow leopard onto an older Mac I run into the window that says select the disk where you want to install Mac OSX but nothing is there to select

I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive. I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?

After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.

I'm trying to install Mac OSX on an external drive with my Mac Mini

A few days ago, I picked up my new Mac Mini. I'm using the install disk included with the Mini in an attempt to install Mac OSX 10.4.5 onto my external hard drive - a LaCie d2 200GB.
The installer knows the LaCie is there - but it won't let me install it there. I had no problem doing this with my last Mac (Power Mac G4). Does anyone have any suggestions?
Mac Mini Duo Core 1.66Mhz Mac OS X (10.4.7) LaCie d2 Firewire Hard Drive 200GB

If you are using an Intel mac mini you need to change the partition scheme. Without doing this the Intel Macs cannot boot from the drive.
To do this you need to open Disk Utility, select your drive (not the partition), then select the Partition tab. In there you'll see an Options… button. Click on it and change the partition scheme to GUID Partition Table. Click OK and then apply the reparitioning.
Please be aware that by making this change you will be able to boot your Intel Mac from the drive although a PowerPC drive will no longer be able to use the drive as a boot drive.

Just installed mac osx snow leopard upgrade and connected my printer to it too, and realized I have no sound anymore

Just installed mac osx snow leopard upgade and connected my printer too, and realized I have lost sound!   Can anyone help?

In case I misunderstood, did you mean that the 10.6.3 version of Snow Leopard was the upgrade? If so you need to update via 10.6.6 to 10.6.8. These updates can correct minor system upsets.
And ... did you also repair permissions both before and after you upgraded.   You should do this when you progress via 10.6.6 to 10.6.8 too.

Quicktime Player states "You can't open the application QuickTime because the Classic environment is no longer supported." I just installed Mac OSX Snow Leopard. What do I need to do?

I just installed Mac OSX (10.6.8) and can not get Quick time player to work. When I go to the Apple site to download a version that will work, it states that Quick Time Player automatically comes with OSX. What do I need to do to use Quick Time Player with 10.6.8

Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
(Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)

I try to install mac osx 10.5.6 on my powerbookG4

Similar Messages

Maybe you are looking for