I try to load data in a infocube while compression are running

SDN Experts
i try to laod data while compression are running. it is a full load, but i stoped my data load job right away in 20 minutes from sm37 when i see that it could cause problem. i like to know what can i possible able do know? and what are the conciquenses?

i changed the request status to red in the infocube. if i try to delete the request i think it will effect the compression job that is running right know. should i wait to see if the compression job is successful before i delete the request from the infocube?
there are five compression job that are scheduled to compress it compressed all the four request successfully and compressing the last i right know?
i am really scared about this do you think every thing will be alright even if the compression job failed? what are the negative effects of the action i did? should i run the report of the compression job is complete to check the performance or the data is ok?
please help. thank you.

Similar Messages

Load data from an infocube into other infocube

Hi guys....i try to load data from an infocube to other infocube.....i generated the infosource for export without problems i can visulize the datasource in my BW System assigned well...but how i can run the extraction from one infocube into the other?
I view that in ODSs there's an option to run load of data into datatargets but in the infocube i can´t find this option......
is there anything else to do?
Regards

The Infosurce and Datasource was linked automatically i can see this in Source System Myself but i can´t see it in Infosources Tab and i can´t create a Infopackage....that´s my problem

Error while loading data to an Infocube from 0EC_PCA_1 extractor

Hi,
I am trying to load data to the infocube form the extarctor 0EC_PCA_1(Profit centre:Transaction Data on Acounts).It is giving the following error.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Please provide your inputs.
Thanks in advance!!!

Hi,
The following is the total error message.
Extraction (messages): Errors occurred
Error occurred in the data selection
Error 4 when starting the extraction program
Errors in source system
The data extraction is terminated.
Thanks,
Bhagyarekha.

UNCAUGHT_EXCEPTION on load data for 0PU_C02 infocube

Hi Everybody, I am trying to load data into 0PU_C02 infocube from 0PU_O31 ODS, but the system shows me a problem in the log (ST22), the message includes:
"UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
"SAPLRRMS" or "LRRMSU13"
"RRMS_X_MESSAGE"
Thanks for your help...

The below threads will help you to solve the issue.
Short dump while loading statistics data - 'CX_RSR_X_MESSAGE'
Short dump u201CCX_RSR_X_MESSAGEu201D with cube 0PS_C031
Loading 2lis_11_VAITM thowing error CX_RSR_X_MESSAGE

Load data to 0SD_C03 infoCube issue with 0MATERIAL

Hi experts,
I m loading data to 0SD_C03 InfoCube and while executing the DTP I faced the erreur saying that the material data in the PSA (2LIS_11_VAITM) exceeds the length of the 0MATERIAL InfoObject! knowing that the source field MATNR and the InfoObject 0MATERIAL have the same length = 18.
I tried also to load the master data into the 0MATERIAL InfoObject but the DTP fails ...
Thank's for your help.
Abdess,

Hi Karaman,
Through user exsit, I tried to modify the data from 2LIS_11_VAITM and replace the material number by another more short. in the InfoPackage selection, I restricted the data from 2 LIS_11_VAITM, plz see below:
When I execute the DTP to load data into 0SD_C03, it gives me the same error!!
Any help please.
Abdess,

Steps for loading data into the infocube in BI7, with dso in between

Dear All,
I am loading data into the infocube in BI7, with dso in between. By data flow looks like....
Top to bottom:
InfoCube (Customized)
Transformation
DSO (Customized)
Transformation
DataSource (Customized).
The mapping and everything else looks fine and data is also seen in the cube on the FULL Load.
But due to some minor error (i guess), i am unable to see the DELTA data in DSO, although it is loaded in DataSource through process chains.
Kindly advise me, where did i miss.
OR .. Step by step instructions for loading data into the infocube in BI7, with dso in between would be really helpful.
Regards,

Hi,
my first impulse would be to check if the DSO is set to "direct update". In this case there is no Delta possible, because the Change log is not maintained.
My second thought would be to check the DTP moving data between the DSO and the target cube. If this is set to full, you will not get a delta. It is only possible to create one DTP. So if you created one in FULL mode you can't switch to Delta. Just create the DTP in Delta mode.
Hope this helps.
Kind regards,
Jürgen

How to load data from one Infocube to another request by request using DTP

Hi All,
I have a scenario where we are maintaining backup Infocube B for Infocube A. User loads data from a flat file many times a day in different requests. We need to maintain backup of the Infocube A on weekly basis. i.e data to be refreshed with delta update from cube A to cube B. There are some situations where user deletes some of the requests in Infocube A randomly after use. Will this change effect in back up cube B when performed data refresh from cube A to cube B. i.e. this functionality is similar to reconstruct in BW 3.5. Now we are running on BI 7.0 SP 9.
Can anyone answer this ASAP.
Many Thanks,
Ravi

You cannot load request by request, " Get Data By Request " DTP loads request by request on " First In First Out " basis. You can run some Pseudo/Fake DTP's if you dont want to load data from a particular request.
If the user deletes a request from Cube A, it wont be loaded to Cube B but if it is already loaded in Cube B and later the user deletes the request from Cube A you have to delete the request frm Cube B. Inorder to monitor request by request run DTP with " Get Data By Request set.

How to load data into an infocube from a flat file

HI friends,
Iam a learner of bw.
I have master and transaction data to load into an info cube.
I think we can load master data first, and then transaction data. that is master data we have to load through direct or flexible update and then transaction data through flexible update by preparing 2 excel sheets( one for master data and other for transaction data)
Or
can we load both at a time by preparing a single excel sheet which covers the values of characteristic, attributes and key figures.
sai
sai

Hi Sai,
Please find your replies below -
I have master and transaction data to load into an info cube.
>> You load master data in InfoObejcts and Transaction data in Cubes. So first Identify the Master data InfoObjects & InfoCubes<<
I think we can load master data first, and then transaction data. << Yup good practice is to load master data first & then transaction data<<
that is master data we have to load through direct or flexible update << you need to look into your scenario which one are you using??<<
and then transaction data through flexible update by preparing 2 excel sheets( one for master data and other for transaction data) << Yup I think you will need separate file - Master data one for InfoObejcts data load & transcation data one for InfoCube data laod>>
Or
can we load both at a time by preparing a single excel sheet which covers the values of characteristic, attributes and key figures.
Hope it helps
Regards
Vikash

Can't load data to a InfoCube

Hi,
I'm using minisap BW NW2004s with supportpackge 008. I created a infocube with all components necessary to upload a file to it: source system, data source, infopackge, transformation (datasource to infosource), infosource, transformation( infosource to infocube) and the infocube. All components are ok and active, but when I push the button "Start" in the infopackge it send me a message "Data was requested" but nothings happen, no record on the monitor and the infocube remains empty. I can read and display the file on the datasource. Can you help me?
Thanks a lot!
Marcus

Hi Marcus,
I think you ignored the DTP(data transfer protocol) which is used to load the data from the datasource to the cube. Create a DTP for the transformations and load the data from the DTP it is like infopackage and loads the data within the BI system.
In BI-7 infopackage does'nt load data upto the cube it only loads data into the datasource(PSA) from here on u need to use the DTP to load the data.
Hope this helps,
regards

Quetsion about loading data from transactional infocube

Hi,
We have 4 transaction infocubes where the users data will be saved from their layouts and we have one more transaction infocube(A) where all these 4 transactionl data will saved to onecube say(A)
We also load from A- to other basic cube(B).
My questions are when
1.I load from All these 4 trnsactional cube to A - Do I need to say transactional can be planned not loading allowed.
2.When I load from A to b(basic cuvbe do I need to say - Planning cannot be allowed only laoding)
Let me know
Thanks

If you want to load data from planning cubes to further data target using update rules or transformation, their requests need to be green (yellow request would not load further). In this case the target transactional cube should be in loading mode. If you do not want to do these things, you can look at using a copy planning function (but remember that planning function takes more time than BW loading - this difference would be really noticeable if the data volume is large).
There are many threads on this topic - if you search, you can get more info.

Help in loading data from an infocube to another

all,
i have been trying to load data from a consolidation infocube of one BW system to a similar infocube in another BW system
I managed to load data by identifying the fist system as the source system
the challenge that i m facing is as follows
the first infocube has approx 70000 records; while when i uploaded the data approx only 20000 records got updated
would appreciate help on why this has happened
thanks for your time

Hi,
   Are you using Open hub interface?
   If yes, then the structure/datamodel of the two infocubes are same?
   If both the infocubes are having the same structure, then did you apply any transformation (custom)logic,selection field values in the infospoke definition ?
   If the all the above are true, then do check the the status overview of the executed infospokes grouping by logical target system, destination, infospoke and day.
   And also double click to access single request log and then drill down to record count and errors.
regards,
ravi

Error while loading data into Customers InfoCube

Hi All,
I am receicing the following error while loading the data into the following InfoCube 0SD_C01.
The error I am receiving is "LIS Updating is Still Active".
I am also receiving error similar to "The data is being edited at the time of loading the data request".
Does anybody have encountered such a situation...
Please help me out.
Regards
YJ

Hi Dinesh and Paolo,
The links are very useful.
I went through the Transactions and found out that the Asynchronous Updating is going on for S001.
So what are the steps that I can take as a BW Consultant so that the data is loaded into BW.
Regards
YJ

Why is my iPad Mini freezing when I try to load data?

My iPad Mini is freezing when I attempt to use any data at all, including, but not limited to:
-Notes
-Contacts
-Safari (History, Back Button)
-Apps (Shows loading screen with no progress, turning off and on shows a freezed screen of the completed game)
Not sure what to do, I use my iPad for a lot and have lots of valuable data on there, and I don't want to buy another. Any suggestions?

If the Reset does not Resolve your Issue...
1: Connect the device to Your computer and open iTunes.
2: If the Device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
GroxTerror wrote:
I use my iPad for a lot and have lots of valuable data on there,
How to BackUp > http://support.apple.com/kb/ht1766
What gets Backed Up
iTunes http://support.apple.com/kb/ht4946
iCloud http://support.apple.com/kb/PH2584

HT4682 I have a samsung full hd 1920x1080 camcorder that doesnt seem to be compatible with final cut pro because when I try to load the videos onto it, the stills are just black and all I get is sound. Can someone help me?

Yeah any help would be appreciated.

I can't find any information about what format and specs this camera shoots. The only think I can find online is the manual as a PDF, which I'm not about to read. Maybe you could look through it and see if you can find out the specifications that this camera shoots. In all likelihood you'll have to convert the media using MPEG Streamclip or Compressor.

I have been importing pictures and today i succesfully imported more, they are in my iphoto library but when i try to load them for my ebay account they are not there. it says they must be in the correct format, help!!

please help me find these pictures!!

Before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

I try to load data in a infocube while compression are running

Similar Messages

Maybe you are looking for