I try to open itunes but a mistake keeps apearing i tunes new library

I try to open i tunes but a mistake messages keeps apearing, " i tunes new library .

Does the original library file still exist on the computer? Hopefully when creating the new library it was done in a seperate folder as I do not believe iTunes allows for two library files in the same location.

Similar Messages

I created a 2nd library for my husbands music and now I can't find my original library. I did hold down the shift key to open itunes but is still comes up with the new library. What am I doing wrong? I tried several times with no luck. Thank you.

I just got an Ipod Classic recently and downloaded Itunes. Got my music on my Ipod. My husband just got an Ipod Touch. I followed the directions on how to create a 2nd library and was able to load his music onto his Ipod. My problem is now I can not find my original library. I did what the directions said about holding down the shift key while opening Itunes and it still goes to the 2nd library that I created. How do i get my original library to come up? I tried several times with the same results. Please let me know what I need to do to be able to get into either library. Thank You.

Does the original library file still exist on the computer? Hopefully when creating the new library it was done in a seperate folder as I do not believe iTunes allows for two library files in the same location.

A message "MSVCR80.dll" cannot be found appears on my screen when I try to open iTunes but I am unable to do so. What can I do?

A message "MSVCR80.dll" cannot be located to open iTunes. This occurred after I attempted to download a new iTunes update. How do I fix this issue?

First, uninstall all Apple products from your Control Panel. There should be 4 itmes. 1.Apple Application support, 2.Apple Mobile Device Support, 3.Apple software Update, and 4. iTunes.
Second, reboot the system.
Third, go to www.apple.com/itunes/ and download iTunes. Be sure to allow to install (.exe) as an administrator.
That's it. You should get back to your old iTunes (latest version) and it's library.
Message was edited by: nkg0319

I try to open itunes from the desktop and It says that my library is locked

ya thats my problem

According to a random website... the HTC Wildfire S uses a Qualcomm MSM7225 processor. This processor unfortunately does not support the full ARM version 7 instruction set, so Firefox cannot run on it.

I tried to update to the most recent itunes, but the update failed and now when I try to open itunes a dialog box pops up and tells me that it can.t open because MSVCR80.dll is missing. I need help!

I tried to update to the most recent version of itunes but the update failed. Now when I try to open itunes I get a dialog box telling me it can,t open because MSVCR80.dll is missing. I tried uninstalling and reinstalling itunes but I grt the same message. What can I do to fix this?

Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process.

Every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this?

every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this? I don't want to lose my music and would at least want to save that.

Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086 and note to run as admin

After installing the maverick i get this message when i try to open iTunes: If you want to run i 64bits modus you must remove the mark:Open in 32bits modus.But i have removed the 32bits and i still can't get it to work!Have maces

after installing maverick i get this message when i try to open itunes:Unmark the 32bits modus-but i have unmarked it several times!The new iTunes requires 64bits modus so what shall i do?

I upgraded my 2007 iMac (20") to Maverick. Should never have done this! Lost mail, lost my mail archive, lost numerous programs/applications, lost all my installed hardware, spend 4 days on getting it running again with the (supreme) help of Apple Care. However it should not have happened at all!
iMac Computers with less than 4Gb of internal memory (as explained by Apple Care), or less than (estimated) 150Gb of free disc-space should not upgrade! Simple as that and the App Store should warn you about that and not simply let you pick up your free copy of Maverick!

I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison"

I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?

Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd

HT1926 Installation of latest itunes update stopped, gave error message re couldn't find MSVCR80.dll. Suggested reinstall. Tried but that generated same message. Now get that message when I try to open itunes. I have Windows XP. Help!

Installation of latest itunes update stopped, gave error message "couldn't find MSVCR80.dll" Suggested reinstall. Tried but got same message. Now get same error message when I try to open itunes. Help!

Hey jeight26,
When you uninstalled and reinstalled iTunes, did you use this article?
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.

I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. The computer I transfered to had a bunch of files on it and I got full ownership of what was already there, so, how do I get to my iTunes library, I do have access as an administrator to the iTunes library (that works just fine) already there and I guess I must have had a newer version ofiTunes on my defunt eMac....

Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first.

My computer reboots when i try to open itunes,i tried to uninstall and reinstallitunes but when i try to do either my computer reboots also.

when i try to open itunes my computer reboots. i have tried to uninstall and reinstall itunes but when i tried either my computer also rebooted.

Are you getting any sort of blue screen when the PC restarts? If so, what numerical and textual codes are you getting for it?
(For example: STOP 0x00000023 FAT_FILE_SYSTEM)
If the blue screen also mentions a specific file, let us know what the file is called. (Precise spelling please. Include filename extensions like .sys or .dll ... for example, "atiduag.dll".)

I installed itunes and quick time but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096)"

I installed itunes and quick time but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096). I have removed both itunes and quicktime from my computer and re-installed them and I still get the same message. What do I do to get itunes to work?

That one is often a compatibility mode problem. Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions for a non techy person?

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

When I try to open itunes I get a small box that says...This version has not been correctly localized for this language. Please run English version but when I click ok nothing happens

When I try to open itunes i get a small box that says....This version of itunes has not been correctly localized for this language. Please run English version. Help please!

June 2014, iTunes not localized - https://discussions.apple.com/thread/6306009 - language settings

I try to open itunes but a mistake keeps apearing i tunes new library

Similar Messages

Maybe you are looking for