I try to open the apple store and in a few seconds the aplication close, why?
hello?
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Similar Messages
-
For some reason Safari and App store won't open anymore. Everytime I try to open them they crash and it says it's because of the webkit2 plug-in. Anyone know how to fix this problem?
If you are getting an 'invalid security code' message then is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store -
I just bought aperture and downloaded it from app store. when I try to open the app I get a warning message that says: There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”. The only option the is to quit. What is wrong?
Hi,
not sure what the problem might be, but you can try the following:
While pressing ALT+CMD on the keyboard, click on the Aperture icon in the dock: Aperture then opens in a special "recovery mode", and you're prompted to choose what kind of repair you need: Repair Permissions / Repair Database / Rebuild Database
Considering the situation, I'd recommend you to try "the "Repair Permissions" option first.
If that isn't enough (and it may well be the case), then go straight for the "Rebuild Database" option; it's a non-destructive opration anyway, but since you've just installed Aperture you shouldn't have anything valuable in the default library...
NOTE: if you do have some pictures in the library, instead, do a backup first! Time Machine is your friend
Another option would be to launch Aperture while keeping only the ALT (option) key pressed: Aperture will ask you what library you want to open, or you can choose to create a new one from scratch.
Good luck!
Corrado -
why can't i sign in in the apple store using my apple id? but from the itunes application in my computer which i downloaded, i can use my apple id to sign in...and while opening my apple store in my phone it appears blank..i don't know what happened?
It's a straightforward port-forwarding issue.
You need to forward ports to the internal ip address of your apple tv as follows:
TCP 123
TCP 3689
UDP 5353
TCP 80
TCP 4343
TCP 53
This may also solve other problems you may have with homesharing... -
Transitioning from an older G5 Pro to a new iMac. My Final Cut Express files are on a 2T WD external HD. When I try to load a project to the iMac I get a "General Error 41" and the files do not load. Took the WD the Apple Store and tried it on one of their iMacs...it works fine. The problem seems to be in my new iMac, other WD's with different files load OK. Any ideas?
Hi
Can it be so that You try to boot a G5 (Power) Mac from one external hard disk - then try to boot an INTEL Mac from same external Mac.
WILL NOT WORK - It's not just the Mac OS Extended formation that plays a part here - they have to be formatted differently to be bootable on each system.
I don't think there is any solution to this AT ALL.
When You format a hard disk.
• Select Partitions
• Under the graphic representation to the left there is an Alternative button
Here You select if it's supposed to be Bootable on a Power CPU or INTEL-CPU
No other possibilities.
Yours Bengt W -
I want to initialize my MBpro end reinstall lino, but I purchased it from apple store and cancelled the installation file. If i try to download again it from appstore I couldn't...How I can do ? Please help me
Thanks for the feedback. Now, before installing in, put a copy some place safe and you won't have to download it again, wasting bandwidth, time, and electricity. Why? Because the installer blows itself away during the installation—IMO, a braindead delivery system, copied from their iOS world, but totally unsuitable for computers.
-
Hello all! I bought an app on the apple store and eventhough it was charged on my credit card bill it still opens like if I had not purchased it. So I was charged but didn't get the app. I'm trying to report it but doesn't go through. What can I do? Thx
you may delete this discussion. I fixed the issue
-
Hallo there.yesterday i opened my brand new ipad2 32gb wifi 3g bought from 5th avenue apple store and i found an atnt sim card inside the slot.is it normal????
lllaass wrote:
In the USA, new 3G iPads come with a SIM card installed.
Just to clarify, in the USA, all new AT&T 3G iPads come with a SIM card installed. -
hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?
If you tried to restore to your iCloud backup and your photos didn't fully restore, first go to Settings>iCloud>Storage & Backup and make sure it isn't still in the process of restoring.
If the restore is complete and all your photos weren't restored, all you can do is try restoring the backup again. You might try the solution posted by ezjules in this discussion: https://discussions.apple.com/message/19518589#19518589. This involves opening the photos app after the phone restarts and you provide the passwords for your Apple IDs, then leaving it open for the remainder of the restore process. -
I run mac os x 10.9.5 and i can't open apple store and mail application crush
i run mac os x 10.9.5 and i can't open apple store and mail application crush
any help??
thanks in advanceLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try to launch one of the problem apps. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting. -
When i try to open the app store ,it says cannot open it may be damaged or incomplete
when i try to open the app store ,it says cannot open it may be damaged or incomplete
If you are actually running Mac OS X 10.6.8 then download and install http://support.apple.com/kb/dl1399. This should re-install the Mac App store.
-
I purchased keynote for my new iPad do I need to purchase keynote for my iMac?
When I try and purchase keynote for my iMac I am told that "you have already
purchased keynote, do you want to purchase it again?" Answer NO. I try to open the
keynote app on my iMac and it asks "do want to buy iWork again?" answer NO. Then the keynote app
closes. What an I to do?Call the apple store you got it from and ask them. Sometimes in the past they've extended the 'no questions asked return' but only Apple can tell you for sure.
-
How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive without opening a browser?
The guts of my computer were rearranged and I got a new main hard drive. My old one is still in there and I can get stuff from it, but when I go to the Mozilla folder on the old one, I can't figure out if there's anything I can do to get all my bookmarks from that drive to my new one, where Firefox is newly installed.If you open Firefox then Firefox will always use the default profile folder as found via profiles.ini on your system drive.
You either need to import the file in your current default profile or copy the file to your current profile folder while Firefox is closed.
Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] and no longer creates an HTML backup by default.
There are also (five) JSON backups in the bookmarkbackups folder within the Firefox profile folder.
You can either copy the file places.sqlite to your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] or import the most recent JSON backup from the bookmarkbackups folder of that old profile.
See:
http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See http://kb.mozillazine.org/Profile_folder_-_Firefox
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
See http://kb.mozillazine.org/Show_hidden_files_and_folders
Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
You may want to un-check the box "Hide extensions for known file types" to see the file extensions of all files. -
how do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable. The TV says "no signal. I do not see TV as an option in the display tab of system preferences. what else do I need to do?
First, make sure your TV is tuned to display the correct input signal. Most TVs have several inputs (multiple HDMIs, cable connections, RCA etc) so double-check that you're using the correct one - HDMI1, HDMI2 or whatever is written next to the port.
I assume that you have a mini-Displayport to HDMI adaptor? If you open displays preferences, first tick the box that says "show display preferences in menu bar" then locate the menu and click Detect Displays. See if that helps.
Matt -
Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.
Erica,
I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
For the rest of us, please post when you find a solution.
Best.
BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others)
Maybe you are looking for
-
Getting values from a checkbox
I am iterating through a vector and displaying the values in checkbox format. The problem I have is that my servlet can only see one value that has been selected from the checkbox. The JSP code is as such: <%int checkBoxIndex = 0; Vector abc = (Vecto
-
Reset password for RPD in OBIEE 11G
Hi. Is there a way to reset or bypass the password to open a RPD in offline mode ? I'm using OBIEE 11.1.1.5 linux, and using the Administrator standalone client in windows. Thanksx !!
-
Regarding SAP SRM Inbox configuration
Hello Guys, We are in the process of configuring the SRM workflow approvals in Portal. We made the basic mandatory configurations and we are able to see the workitems in the UWL. But unfortunately, we need configure the Inbox iView comes with the SAP
-
I have a text file that look something like this: [21/06/07] System DEBUG * BA_LOG_OUTPUT System DEBUG Random text Random text System DEBUG Random text Random text System DEBUG Random text Random text System DEBUG Random text Random text <?xml ve
-
Every time I enter into the forum, I have to go thru login process. Can the website remember me so I do not need to login every time.