I try to print a file through my net work 48 pages and it stops after 2 pages help
I send a file to print wireless to the printer and it only prints a few pages then says i have an error???? can anyone help
What model is the printer?
What operating system does the computer use? This will be good to know if any steps or tools need to be ran from the computer.
Is the printer connected to the computer by a USB cable or a network connection? If it is a network connection, is it wireless or Ethernet (wired)? Also, what brand and model is the router?
What is the exact error message you are getting? Is this error on the printer or the computer?
What program are you printing from?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
Similar Messages
-
My photos show in lightroom 5 but when i try to print the file cannot be found
My photos show in LR5 but when I try to print the file cannot be found
Did you buy this directly from Apple or from elsewhere. I've never heard of Lightroom coming pre-installed so it sounds like you MBP might not really be "new."
Enter your serial number here to check the support status and see if the computer has been previously registered:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
If you did not buy it from Apple and that site shows any purchase date other than yours (± a few days), return the computer to the fraud perpetrators who sold it, get your money back, and buy directly from Apple next time -
If I purchase an iTunes movie and try to play it back through my computer/tv via and hdmi connection, will I get sound only through my computer?
Welcome to the Apple Community.
Only through iTunes/Quicktime and only if the TV supports HDCP. -
My ipod 2nd gen has a white screen and when I try to do a restore through itunes it ends with an error 46. Anyone help?
https://discussions.apple.com/message/22808372#22808372
https://discussions.apple.com/message/16155867#16155867
Also Google for:
iTunes error 46
To find others -
How can I print just a part of the page and not the full page with Adobe Reader v 10.1.2?
how can I print just a part of the page and not the full page with Adobe Reader v 10.1.2? I need to print a engineering print with lot of information but information is too small in letter size and I don't have a plotter.
Two ways to print a portion of a page: zooming or using the Snapshot Tool.
ZOOMING:
Zoom into the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure "Current view" is selected under "More options" (you may need to click "More options" to open it).
If you aren't satisfied with the preview, try clicking "Fit" under the Size button.
SNAPSHOT
Choose Edit > Take A Snapshot.
Drag a rectangle around the area you want to print.
Click the Print icon.
Under "Pages to Print", make sure that "Selected Graphic" is selected under "More options".
To enlarge the snapshot to fit the sheet of paper, choose "Fit" under the Size button.
Hope this helps! -
Hey guys i was wondering if i could downgrade my iphone 5 from ios 7.1.1 to 7.0.6 or .0.4 i have 7.0.6 and .0.4 shsh blobs but when i try to build a custom ipsw using ifaith it loads and never stop loading is there any way to downgrade to older ios 7 ?
No, you cannot downgrade your iOS device. That's not supported by Apple.
-
when i convert a word file with a hyperlinks to a PDF file it doesn't work ?? thanks in advance for helping me
using microsoft word.
the hyperlink doesn't work in the pdf file (adobe reader).
adobe reader xi.
my operating system windows 8.1.
the attached screen is appeared. -
When I try to connect to the wi-fi net work at my work place on my new iPad 3 I get a message, "unable to join the network". I have verified the password, so I know it is correct. I know the wi-fi works, because I can connect at home. I have already tried the following:
turn wi-fi off and on again
did a hard restart of my iPad
reset network connections back to factory settings
verified wi-fi is working as my computer accesses internet without issue.
verified that my software is up to date.
Does anyone have more suggestions?Couple of suggestions.
First, many companies have a gateway on their networks that block non approved devices. I work in such a place. You might check with an IT guy , and see if they have a block in place.
Second, the message you are getting means that you have not negotiated the security settings. So either the password is wrong ( case sensitive), or, in some cases, they want a network key as opposed to your normal password.
Again, if you can find one, talk to an IT guy and see if he has some suggestions. -
I can't sync the songs from my computer to my ipod touch. I have gone through the directions on the iPond help page and have not found them helpful. For example, I can't find the autofill button. Can you help?
I have already tried following those steps. I went back and tried to follow them again but they did not work. Some of my songs have synced, some have not. And I am still not seeing the Autofill icon on the bottom of the menu or anywhere else. I fear something has been corrupted here and I need to start afresh.
-
Im running on 10.6.8 On my mac...But i downloaded Mountain Lion recently and theres always an error once i try run it..do i need Snow Leopard 1st and then Mountain Lion..HELP!!
Sorry Josh, I'm having a bad day with my illness.
Can I ask you to repost this question? Might try in the Mountain Lion forum as well as here.
Put "Mountain Lion Install fails" in the headline box, then from your second post -
"When i run The OSX Mountain Lion Icon i downloaded from the App Store it always gets to the point when its about to restart but the it keeps saying "please quit the application and try again" Now i've tried Re-Downloading it a lot of times but that doesn't work"
and add the Mac specification -
MacBook7.1
2GB RAM
Upgrading from Snow Leopard 10.6.8
Sorry I can't concentrate sufficiently today. -
Open and print pdf file through form 6i
I want to run and print a pdf file through the form. Any suggestion please......
thanks in advance....
iftiyou could try using the DDE package to open the file
and then print from the actual file location using a host command. -
Why does Photoshop CS5 cease working when I try to print a file on my Canon Lasershot LBP7200?
I am using Photoshop CS5 extended with the latest upgrade 12.0.4.0 installed. My OS is Windows 7 with the latest updates installed. I have a Canon Lasershot LBP7200 Cdn printer installed as a network printer. When I try to print, e.g., a jpeg file using the print command I get an error message that says Photoshop has stopped working and will be shut down. This did not happen before i started installing the updates for Photoshop -- the print commmand in v. 12.0 worked OK. I have tried uninstalling and reinstalling both the printer and Photoshop but this makes no difference - the file will still not print in v. 12.0.4.0 and the application crashes.
Here is the error message in the application log:
Faulting application name: Photoshop.exe, version: 12.0.4.0, time stamp: 0x4d9d8cbc
Faulting module name: CNAP2SMK.DLL, version: 4.4.5.2, time stamp: 0x48bf6e6d
Exception code: 0xc000000d
Fault offset: 0x0000df3a
Faulting process id: 0x1e00
Faulting application start time: 0x01cc2a70dc9c1900
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS5\Photoshop.exe
Faulting module path: C:\Windows\system32\spool\DRIVERS\W32X86\3\CNAP2SMK.DLL
Report Id: 58ca671c-9664-11e0-a05a-00271337ef93
Here is the Windows error reporting message - no response from Microsoft to the error report:
Fault bucket , type 0
Event Name: BEX
Response: Not available
Cab Id: 0
Problem signature:
P1: Photoshop.exe
P2: 12.0.4.0
P3: 4d9d8cbc
P4: CNAP2SMK.DLL
P5: 4.4.5.2
P6: 48bf6e6d
P7: 0000df3a
P8: c000000d
P9: 00000000
P10:
Can anyone help me resolve this annoying situation please?
Hibiscus08I thought of something you can try... Not a very great chance of success, but not too difficult to implement (if a bit geeky)...
Just in case this might be because of recent security changes Adobe has made regarding loading DLLs, it might be interesting to try putting the name of the folder containing the Canon DLLs into your system's PATH.
1. You'll need to figure out in what folder CNAP2SMK.DLL resides. That's not trivial, as Windows normally avoids searching in System folders by default. Possibly the most reliable way is to start a CMD window As Administrator then type in the following command:
DIR C:\CNAP2SMK.DLL /S
2. The above command may take a long time to run. Assuming it finally does yield a folder name containing the DLL file and its cousins as installed by the Canon print driver installer, click Start, then right-click Computer, then choose Properties. Then click Advanced system settings.
3. In the System Properties dialog, click the [Environment Variables...] button.
4. In the User variables section at the top, you may already have a PATH variable defined. If so, double-click it. If not, click the [New...] button and add the PATH variable. If it already existed, add a semicolon (;) then the folder name you got from step 1. If the variable is new, just add the folder name.
5. OK out, then log off and back onto Windows.
6. Do a test print.
7. If it doesn't help, you can go through the same steps to remove the folder from the PATH.
-Noel -
The print dialouge box comes up. I select print to PDF. Another box comes up and says it is preparing the document (This is the way it has always been). Then, nothing. It says Firefox is not responding. If I try to close out the print box, it not only closes the page I was on, but any other open tabs in Firefox. How can I fix this?
I didn't see that I could edit the question before "I answered myself." I updated the question.
-
Intermittently, when I try to enter the internet through Safari on my Imac, it freezes up so that the loading line only goes 1/3 way across and then stops. If I shut down the computer and then restart, it usually loads fine. I have had my internet provider check eveything form their end and it is fine. I suspect that I have a software conflict. My provider and others have said that I should use FireFox because Safari is not that stable. I am running OSX Maverick on my system. This was a recent download. Is anyone else having this problem and have you any ideas how I can correct it.
If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help to identify which such modifications you've installed, as well as some other aspects of the state of the system that may be pertinent.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: You copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, proceed anyway.
Below are instructions to run a UNIX shell script. It does nothing but produce human-readable output. However, you need to be cautious about running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The script will line-wrap or scroll in your browser, but it's really a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user, and the affected user is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The administrator is the user that is created automatically on a new computer when you start it for the first time. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Triple-click anywhere in the line of text below on this page to select it:
clear; PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/ /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; a=$(id | grep -w '80(admin)'); [[ "$a" ]] && sudo true && r=1 || r=; { [[ "$a" ]] || echo $'No admin access\n'; [[ "$a" && ! "$r" ]] && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage"; [[ "$o" ]] && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; [ "$r" ] && { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; }; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; exit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately, leaving the Terminal window empty. If that doesn't happen, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter your password, the script will run anyway, but it will produce less information. In most cases, the difference is not important.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again.
Please note:
☞ This procedure is all copy-and-paste — type only your login password when prompted. When typing it, you won't see what you're typing. Make sure caps lock is off.
☞ Remember to post the output. It's already in the Clipboard when you see "[Process completed]" in the Terminal window.
☞ If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary. -
Cannot print in Adobe 9 it will only print to file which does not work
I cannot print a PDF file that is in Adobe 9. It is not the file, I opened several other files and they all do the same thing. INstead of printing. When I click OK after choosing the printer, it goes into a print to file mode. The print to file always fails and then it will nto print. This morning it was working fine. Now it will not print. It may have installed an update to Adobe 9, I do not remember it being 9 before. I am in trouble if I cannot print tonight. Any ideas?
WHat is a "print dialogue?n How can I find it" There is nothing that I can find called print dialogue.
Where do nI find "print to file in order to disable it?
Maybe you are looking for
-
How To make Openoffice look nicer in xfce4??
Hi I´ve been using openoffice2 for month in xfce4. it always looked nice. The same like in kde or gnome. But since couple of days it looks like crap. Like an old GTK1 application. I really don´t know what the cause for this was / is. Anyone an idea?
-
Example:- Please click on this link to go to Google. When they click on the word "link", it'll open a new window and redirect to that website.
-
I have a html page that loading in two edge compositions and an external custom javascript file. The javacsript file includes the bootstrapCallback so I can store references to the loaded compositions and can communicate with them. This seems to work
-
Hi, maybe someone here can help me out. Let me first explain the situation. A couple weeks ago, my hard drive failed. Thankfully, I had everything still intact via Carbon Copy Cloner with a bootable backup on my external hard drive. CCC created this
-
Hi experts. Please let me know how the PSA is managed in SAP BI Netweaver 2004's. The SAP Library says that in the Data warehousing Workbench under the Modeling section, i should find a PSA tree and invoke its context menu for managing it, but unfort