I try to safe my Movie on my usb key but when i try to use an other computer i do not see image
How to safe my projet so i could use an other computer
Hey warriorsc!
You will need to export your iMovie project in order to view it with other applications:
iMovie '11: Export your movies to a Finder folder
http://support.apple.com/kb/PH2285
iMovie (2013): Export a QuickTime file
http://support.apple.com/kb/PH14734
Choose the article listed above that is appropriate for the version of iMovie that you are currently using. Thanks for coming to the Apple Support Communities!
Regards,
Braden
Similar Messages
-
I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
I have downloaded the HD version of a movie from itunes, but when I sync it to my iPad 2 it will not play. It appears that it is on the iPad, but it will not play. Is this because it is HD, and if so is there a way to change it from being HD? Thanks
I'm having a similar problem ... just used my iPad 2 to purchase the Bourne trilogy and it downloaded fine but I did not try to play it right away. Then I plugged the iPad into the computer and it downloaded the SD versions of the movie and I used iTunes to sync my movies. Then I tried to play it and it said it could not open the movie. I then did a full iPad restore and did a fresh sync and now I get the Cannot Opne pop up. Did you ever find an answer to your question?
-
I Have downloaded 2 movies to my iPad on an iTunes account but when I go to watch it, it says I'm not authorized.
I have read about some cases where movies rented or purchased on one device will not play on another device. Seems to happen mostly with Apple TV and iPads. One way some have worked around it is to cable from the downloaded device to a TV or Apple TV.
Were these movies purchased or rented from iTunes? Not sure, but that almost sounds like a iTunes Password problem. Maybe try checking that you're signed in as the same account that purchased the movies. -
I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?
See this previous discussion:
https://discussions.apple.com/message/16962474#16962474 -
HTC Desire
Android: 2.2 (stock)
Build: 2.29.405.5
KeyBord: SwiftKey (newest version)
Every time i try to fill a textfield on a homepage swiftkey crashes. But i can type in a internet-adress without any problems. If i use any other Keybord all work fine, but i dont want to use any other Keybord than SwiftKey.Thanks for the report. We are working on this problem; for details see https://bugzilla.mozilla.org/show_bug.cgi?id=617298
-
i am try to use my itunes which i have not used in a while trying to do all the upgrades. i have an older macbook but i cant download anything. so is apple saying that i will not be able to connect my iphone to macbook ever unless i get a new laptop?
Your MacBook is compatible with Mac OS X 10.6.8, which is the minimum required to install the current version of iTunes and sync devices running iOS 7. It doesn't need to be compatible with Lion, Mountain Lion, or Mavericks.
(101906) -
I am trying adobe Photoshop and adobe illustrator because I can't decide which one to buy so I want to try both, after I downloaded Photoshop I can not see the option "free trial" for adobe Illustrator, it is because I can only free try one at the time??
Bryan,
You can download both at the same time.
But you may wish to start off with one and use it full time, then download the other later, so you get the maximum possible time with both.
If you have trouble getting the free trial on the Adobe site, you may try here or here:
http://prodesigntools.com/tag/ddl
http://technolux.blogspot.co.nz/2011/02/adobe-direct-download-links-less-akamai.html#more -
Purchase a movie, down loaded it. But when I play it back it freezes after 10 minutes of playing. What can I do to fix the problem?
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item. -
Firstly why is it so difficult to find answers to problems?!?!?!?!?!!?!?!?!?!?
Secondly
I have purchased and downloaded a movie but when I try to view it on my PC or my Apple TV it says that I haven't purchased anything, yet when I go into my iTunes account I can see my purchase.
Frustrating or what?!?!?!?!?!?!!?!?!?Details, please. Purchased from where, the iTunes Store? If so, does the movie appear in iTunes, and if it does what happens when you select the movie and click Play?
It's really difficult to offer advice with so little information to go on, so please post back and give us the complete situation. We can then probably come up with suggestions.
Regards. -
Macbook Pro won't boot into safe mode or via bootable USB key
Hi,
Am running OSX Lion latest version on my Macbook Pro 4,1 and can't get the thing to boot from any source. Always get's stuck at the grey screen with apple logo. Have tried all the following...
- Straight Boot (power on)
- Boot via Recovery HD (hold option on bootup then select)
- Boot via Safe Mode (Holding Shift on bootup)
- Boot via Safe Mode Verbose (Shift, Command, V)
- Boot via bootable Lion USB Key (Hold option, and choose the USB drive - not the same USB key works on my other macbook pro)
On every one (except verbose) it just get's stuck on the grey screen with spinning timer thingie.
I have done PVRAM reset, SMC reset and have reseated the RAM and all to no avail. I'm pretty sure the problem was caused by removing battery at wrong time (device not responding after sleep mode started and I plugged in power - should have been more patient!)
I have a Time Machine backup but it's a bit older than I thought and very much want to get my newer photos off it before rebuilding - not that Time Machine would work in current state anyway.
So what are my remaining options? Will I have to open it up and remove the HD as next step or is there anything else left to try? Can I remove the HD and connect it via a USB caddy to my existing Mac to recover info (hardrive spins and sounds ok to me)?
Any advice appreciated...ds store wrote:
Yes, once the data is off you can use Disk Utility to Erase the entire drive (Lion + Recovery) with the Zero option (one selection below 7x) then use the Lion USB to install it fresh and stick it back into the machine.
Thanks for the info - I removed the HD and data is all ok on there so very happy about that. Before I wipe the data (all backed up now) I thought I would try booting the mac without any harddrive installed - using a OSX Lion bootable USB. However, still can't get past the grey apple screen and circle icon whirling away. I know the USB works ok, as tried it in my 2011 Macbook Pro and it boots absolutely fine.
I am happy to wipe the HD now and start again, but seeing as the DVD Drive is broken I'll probably need a USB drive boot to install OSX onto the wiped HD anyway. I'm a bit lost as to what to try now. -
Using photoshop elements 13 for creating a brochure -drew the rectanle shape for the first column but when i go to the move tool it doesnt allow me to highlite this shape why?
The faulting module is photoshop. Report below.
Source
Adobe Photoshop CC 2014
Summary
Stopped working
Date
2/2/2015 4:54 PM
Status
Report sent
Description
Faulting Application Path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 15.2.2.310
Application Timestamp: 5480338c
Fault Module Name: Photoshop.exe
Fault Module Version: 15.2.2.310
Fault Module Timestamp: 5480338c
Exception Code: c000001d
Exception Offset: 00000000049de322
OS Version: 6.3.9600.2.0.0.768.101
Locale ID: 1033
Additional Information 1: 8db4
Additional Information 2: 8db473619c10c0c8b85ce99afe676ed8
Additional Information 3: f06d
Additional Information 4: f06da704bdd5338df2a8d09bde2244bb
Extra information about the problem
Bucket ID: 1fe6d1d4e5765bd348843b981b8ec4d2 (85990875000) -
I connect on my ipad to my wifi and it sows good signal strength but when i try using the internet it says it cannot because it is not connected to the internet.
Have you tried rebooting your router - unplug it for about 30 seconds and then plug it back in? Is this a new problem? Have you been able to connect to your home WiFi before?
This WiFi assistant set up article might help.
http://www.apple.com/support/ipad/assistant/wifi/
More troubleshooting help is available here.
http://support.apple.com/kb/ts1398 -
I want to see movies in my HBO app. I cannot do so because the message keeps coming up that I must take the HTTP off in my wi-fi settings. I do not know how to find this in those settings. I am a novice at this whole thing, so be patient with my ignorance with techie things.
There is no HTTP in WiFi settings. Are you talking about an HTTP Proxy server? If so, this may mean that the HBO App does not work correctly if you are using a Proxy server for your internet connection. To see if you are using a proxy go to Settings > Wifi and touch the blue ">" to the right of your network name. This will bring up the network connection details. At the bottom will be information about any Proxy server that you are using.
What exactly is the error message? -
It is the latest version of iTunes btw.
The faulting module is photoshop. Report below.
Source
Adobe Photoshop CC 2014
Summary
Stopped working
Date
2/2/2015 4:54 PM
Status
Report sent
Description
Faulting Application Path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 15.2.2.310
Application Timestamp: 5480338c
Fault Module Name: Photoshop.exe
Fault Module Version: 15.2.2.310
Fault Module Timestamp: 5480338c
Exception Code: c000001d
Exception Offset: 00000000049de322
OS Version: 6.3.9600.2.0.0.768.101
Locale ID: 1033
Additional Information 1: 8db4
Additional Information 2: 8db473619c10c0c8b85ce99afe676ed8
Additional Information 3: f06d
Additional Information 4: f06da704bdd5338df2a8d09bde2244bb
Extra information about the problem
Bucket ID: 1fe6d1d4e5765bd348843b981b8ec4d2 (85990875000)
Maybe you are looking for
-
How do I change the pre-filled file location when I choose Save As?
16 September 2013 Using Windows 7 Home Edition and Firefox 24.0 I always want Firefox to offer a location when I download stuff. At the moment it fills the Save As file location with a location I never use and it is the same one every time, and I don
-
Dynamic table in visual composer
Hi Experts!!! It's possible create a dynamic table in visual composer? I want to show only records that exist unpaginated... Is it possible?? thanks in advance!!! Regards!!
-
Apple tv and Ethernet no wireless
Can I connect an Ethernet cable from Apple TV to a TV to watch a video that is on my Mac without having a wifi network?
-
Hello All, I am learning ActionScript 3.0 A simple question for you. In my Actions panel. I am trying to get a video feed from the Camera. How do i you use addEventListeners to see if the feed is successfull or unsuccessfull?
-
Question about the result of calling JDialog.setAlwaysOnTop(true)
Let's use these two small code snippets for reference. Sample 1 JDialog d = new JDialog(myFrame, "Dialog Title"); d.setModal(true); d.setAlwaysOnTop(true); d.setVisible(true);Sample 2 JDialog d = new JDialog(myFrame, "Dialog Title"); d.setModal(true)