I try to sync my itunes with my iphon 4s 16gb but a message says that the sync fails can anyone help me?
I try to sync my itunes with my iphon 4s 16gb but a message says that the sync fails can anyone help me?
The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.
Similar Messages
-
When i login to my mac, it opens iTunes, Skype and AIM. I've tried deleting these from the login items, but they are not on the list. Can anyone help?
babowa wrote:
If you do not lock that folder immediately after deleting all the contents, it will simply populate again (Resume - a "feature" in Lion). You do that by doing a Get Info (highlight folder and press Command + I keys), unlock the lock at the bottom, enter your admin password, then check the box to lock the folder. lock the lock and you're done.
Yes, that is correct. The alternative is to quit all applications prior to logging out. Lion will then have a chance to remove the saved states.
babowa also wrote:
And, for the OP:
It has also been a regular feature of Mac OS to automatically open any window that was open at shutdown. To avoit that behavior, simply close any Finder windows and properly quit applications by closing their window and using Command + Q (or File >Quit).
This was true only for the Finder. Prior to Lion, no other apps would launch unless they were included in the Login Items for the account. And the OS would not restore windows for other apps.
A very small number of apps (TextWrangler is an example) implemented this capability prior to Lion. They could restore previously opened windows. But that is an application feature, and can be controlled by the application's preferences. Lion implements it at the system level, and users have virtually no control on a per application basis. -
After upgrading to the new ios5 software when singing the iTunes starts sincing and it then fails it says that the sinc failed to start. I have removed iTunes rebooted reinstalled iTunes etc but the problem persists.
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom -
After installing ios6 to ipad2 I no longer it went back to factory settings. I cannot sync iTunes on my computer with the iPad but get a message "pairing record is missing". Can anyone help me.
I need to uninstall my old version on itunes and install a new version, i cant uninstall from Programs and Features, a message keeps coming up saying 'The feature you are trying to use is on a network resource that is unavailable.'
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
Yes Im a lot of a novice so be patient with me lol I am trying to put a 2006 Edition of a weight programme on my laptop, but when I down load it it just comes up in weird script and says cannot operate in Dos mode can anyone help.
ThanksWelcome to Apple Support Communities.
Sounds like you have a program designed to run on Microsoft Windows, or even older (1980's) MS-DOS, rather than Mac OS X. If you have Windows on your Mac installed via Boot Camp, try booting into Windows first, and then loading the CD. If you don't have Windows, it's probably cheaper to buy a new program designed for Mac than to purchase a copy of Windows (US$120 or more), not even knowing for certain if your old program will run. -
Each time I try and update my software, I recieve a message saying that it failed
if you use windows then it seems that the windows user you use dont have writing rights to all the required dirs that itunes would use for temp storage of downloads such as the update
I would contact who ever you use for user management and rights on the computer
and get their help to grant your windows user the required rights -
When i try to sync my ipad with the itunes on my computer it gives me an error message. " The sync session failed to start. How can i fix this?? I had to uninstall itunes on my computer because of runtime error R6034.
The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.
-
Pretty much as above, when I plug my iphone in it just comes up with the message saying the sync session failed to start and thats all I can get out of it :/
Any ideas on what I need to do to get my iphone to talk to my itunes again please?Hi hblower,
As a first step, I would suggest quitting your open apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Then sign out of iTunes:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311?viewlocale=en_US
Restart and/or reset the device:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Are you running the latest version of iTunes? If not, update the software and try syncing again …
Cheers,
Judy -
I am trying to download itunes again after restoring my laptop to factory settings. I can download it & it starts to install but then a message comes up saying 'the installer has been interrupted'
Has anyone any ideas of how to overcome this?
ThanksFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
What can I do to sync Mac Book Air and iPhone 5 calendars if the iTunes message says that 'the sync server failed to sync iPhone'?
Thanks,
JulianRead the KB. Earlier today I had a fail to sync - I closed my Calendar app and the reopened and all was good.
Sometimes just closing the app the relaunching is all it takes. At other times a reboot of the Mac is all that is needed.
MJ -
I synced my iTunes with my iPhone 5. some of the titles on't match the songs. I checked my iTunes database, it is the latest version, and the titles and songs all match. So how do I fix this on my iPhone?
Sounds like you may need to re-download the entire albums from iTunes. See this KB article for how to download past purchases: http://support.apple.com/kb/HT2519.
I'd suggest doing it one album at a time. Delete one, download it from your purchase histor, then the next, etc. -
I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
When i try to start itunes i get a message saying that the MSVCR80.dll file is missing and to reinstall itunes. When I try to reinstall itunes it tells me that I have an Error 7 (windows error 126). Can anybody tell me what this means? Thanks
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
i'm trying to sync my iPad with my new pro and i get message saying 5 computers authorised ?? what to do
1. De-authorize one of your five computers and then authorize your new Pro.
Or, if you don't have five computers and got rid of them before you de-authorized them...
In iTunes, click your iTunes user ID in the upper right corner of the iTunes Store. Select Account and then press the "De-Authorize All" button. All of your computers will be de-authorized. Then it is just a matter of re-authorizing the computers that you want to use with iTunes.
Maybe you are looking for
-
So I made this basic game a few years ago which was in AS2 and Flash 6. Now I want to convert this game from AS2 to AS3 but I have no idea where to start. The code is approximalty 4k lines long and I don't know what to change to make it work in AS3
-
Extending one Region Controller but need hold button id in Another Region
Hi All, I am extending one Region() Controller.But i need to get control to a Button in a different region(Page Button Bar: (EffDateFooterRN)). I tried to use PageLayoutBean as well as OASubmitButtonBean but it is returning null. Can anyone help on t
-
My Iphoto has disappeared all of a sudden. I tried to use my application disc but it gives me an error at the end of installation. I don't have to pay for an App that was already on my computer. How do I download or get IPhoto in my situation?
-
Any Idears on how to use my D-Link Router with Print Server on my mac ?
I just got recently a D-Link Router with Print Server. The Model is a DI-704UP. does anyone know how i can access the printer to my G5 ? talked to D-Link and Apple and they have no solution. IMac G5 Mac OS X (10.4.6)
-
CRVS2010 Beta - WPF Viewer and ReportSource
I have been using the ReportSource from the viewer pre 2010 of visual studio. Now that i upgraded and using the new crystal reports the ReportSource doesnt seem to be included with the WPF Viewer. How do i bind my ReportDocument to the viewer. I'm