I-Tunes 7 won't add more than 9 files at a time to library

Have just upgraded to I-Tunes 7 and now when trying to add files to the lib from the hard disk, if you select more than 9 files at a time it wont add them. Any ideas?
Thanks.

Hi,
Sadly I've tried this before with no luck. Any other suggestions?
Regards,
Gord

Similar Messages

  • ITunes 7 won't add more than one file at a time

    Hello everyone. I have a weird problem with iTunes 7.0.2. Every time I try to add multiple files to the iTunes library using the Add File To Library feature, it doesn't do anything. Adding one file at a time is possible, but tedious. Adding multiple files from a folder (using Add Folder To Library) does work, but shouldn't be necessary. I haven't had this problem with iTunes 7.0.2 on the Mac, and didn't have this issue with iTunes 6.0.5 and before on Windows. Any idea what the problem might be? Thanks in advance.
    -Adam

    Maybe I misunderstood your post, but this sounds like a suggestion rather than a problem.
    You can provide iTunes feedback here:
    http://www.apple.com/feedback/itunesapp.html
    If your post was a question, post back and I'll see if I can help.
    I hope this solves your problem!

  • Can't add more than 1 file at a time to library from DVD... any ideas???

    Have Mac and PC but on the PC side I'm unable to add multiple files (MPEG 4's) to the library from DVD. iTunes WILL always add the first tune that I have selected to the library but it disregards the other selections I've made. In other words... it only will add one tune at a time no matter how many I select.
    I've tried copying them to HD and still the same problem. I've tried puttin them into a folder and adding the folder but still same problem.
    I burned the originals MPEG 4's as data unto the DVD but I don't think that would effect things.
    Any suggestions would be G-R-E-A-T-L-Y appreciated.
    Thanks!
    RCJ

    That is a bug in FCP 6 and 6.0.1...to fix it you need to upgrade to FCP 6.0.2.
    Shane

  • Hp laserjet pro 200 My won't print more than 1 file at a time

    My hp laserjet pro 200 m251 won't print more than 1 file at a time. Any ideas?

    Hi @nocastaway,
    I see by your post that you can't print multiple copies. I can help you with this.
    From the application your printing from, go to File, Print, Number of copies select 2. Uncheck Collate. You can now change the number of copies. Collate should now stay unchecked.
    Try printing the multiple page document again.
    You might have to disable all the startup items, to see if there is another program causing this issue.
    How to use MSCONFIG. Click on the Startup tab and disable all.
    Test the printer.
    Then go back in and enable all from the Startup tab.
    Download and run the Print and Scan Doctor if you are still having issues. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
    What applications have you tried?
    How is the printer connected? (USB/Ethernet/Wireless)
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How to open more than 1 file at a time in PSE12?

    How do you set PSE12 to open more than 1 file (jpg) at a time? I've seen this question come up many times but no one seems to get the problem resolved. I've tried all the suggestions. Any assistance appreciated.
    I had this program installed and working as I wanted about 3 months ago. I then uninstalled and reinstalled a few days ago. Now it won't open more than 1 file at a time.

    Hi,
    My theory is that Windows get confused when it is opening the program file and the following intsructions should create a unique copy. I have produced the instructions in detail because I am never sure how much people are use to - forgive me you know much of it.
    Open Windows or Folder Explorer
    Navigate to C:\Program Files (x86)\Adobe\Photoshop Elements 12
    Look for PhotoshopElementsEditor.exe
    Right click on the file and select Copy
    Right click on a blank space and select Paste - you should get a prompt asking if you want to continue - you do - this should produce a copy of the file
    Rename PhotoshopElementsEditor - Copy.exe to PSE 12 ED  - you should get a prompt asking if you want to continue - you do
    Close the Explorer
    In the Windows Control Panel, select Default Programs
    In Default Programs, Select Associate a file type … - it will take a while to display the list
    Scroll down to the type you want to select - say .jpg and select it
    Click on the Change program button
    Click on the Browse button
    Search for the PSE 12 ED file renamed in 6 above, select it and then click on the Open button
    Click on OK and close the Default Programs
    Now try your tests. I can get multiple files to open as well as retain Expert mode.
    Good luck
    Brian

  • ITunes will not allow me 2 add more than 3 songs at one time in2 my library

    iTunes won't allow me to add more than 3 songs at one time into my library. I just want to select a number of songs in 'My Music' folder on my pc and then add them in one go. I used to be able to on older versions of iTunes, but now it will only let me add 3 songs (using the 'add file to library' option), and no more then one (using the 'import' option). It's just very annoying as it takes aaages to add songs into my library, when it shouldn't. if anyone knows how to overcome this, please let me know! Thanks
    Message was edited by: 5Gmel

    how did u do it i've being trying for a long itme now and it takes forever to add music please share

  • Unable to add more than one album at a time

    So I have had minimal issues with my ipod classic until about a week ago, when suddenly all 45gb of music on my ipod was erased. I didn't do anything stupid like disconnect it when it wasn't ready to be disconnected. So I restored my ipod and then began adding music on to it. The only problem is that if I try and add more than one album at a time, it freezes at some point and some error message pops up (there are a few differnt ones). After that happens practically nothing can be added to my ipod. Any solutions?

    Yes, I was able to add as many albums as I wanted before the crash and I have restored it three or four times since then because of this problem.

  • Is it possible to add more than one page at a time in pages - word processing?

    Is it possible to add more than one page at a time in pages - word processing?

    I haven't been able to find a way to add more than one page at a time.  I think you'll have to add them one at a time. 

  • How do i add more than one pdf at a time to profile manager books

    How do I add more than one pdf at a time to profile manager books? When I browse to my pdf folder I can only select one pdf at a time. I have 500+ pdf files I need to add. Any help would be greatly appreciated.

    Bucknut wrote:
    I want to add more than one email address to my address book from an email I received. They were in the CC of the email I received. is there anyway to drag them all into an address book group all at once. I hate having to add and address and then having to find the address and then add it to a group. thanks
    no, there is no way to do that, sorry. you need to control-click on every email address one at a time and select "add to address book". if an email is in the address book already that option will not be there.

  • Any way to transcode more than one file at a time?

    I've noticed that Final Cut Pro X, when doing transcoding (for Optimizing or creative Proxy media) only processes a single file at a time (whereas it can handle processing up to 5 audio files at once), and is only using about 70% of my processor(s) -- I have a dual core, Core i5 processor, 8GB of RAM, about 500MB used by FCPX during the processing.  So this thing should have PLENTY of processor and memory headroom to use, and it should certainly be able to transcode more than one file at a time.  Yet it isn't nearly taking full advantage of the processors, or the RAM.  Is there any solution to this problem?
    --Andy H.

    Try the 'add folder to library' option under file on the main menu.

  • Html tag to upload more than one file at a time

    hai sir this is surendra i need html tag to upload more than one file at a time .I am using
    <input type="file" name="">
    tag to upload single file at a time i need tag to upload more than one file at a time .
    Waiting for your result

    You can add more than one input element of type file.
    <input type="file" name="name1">
    <input type="file" name="name2">

  • Deleting more than one file at a time from Nomad Jukebox Zen Xtra 4

    Is there a way to delete more than one file at a time from Zen Xtra? Actually, I'd like to delete most of the 800+ files and the only way I've found is to do them one at a time..! Help!

    Either use finder to drag and drop those tracks onto
    "Library" in iTunes' left "Source" column or from
    iTunes Menu Files use "Add to Library ..." then
    navigate to a folder that keep a yoru tracks and
    select that folder.
    This did it! I was doing an "import" which would only let me do one song at a time. But the "add to library" and the drag and drop both worked. Thanks!!!
    New Mac user
    Scott in Alaska
    MacBookPro   Mac OS X (10.4.5)  

  • Can not color label more than one file at a time

    Hi,
    I've had this problem since 10.6.6-ish, i can not color label more than one file at a time in the Finder.
    Wether i select two, twenty or twohundred only one file gets color labeled.
    It doesn't seem to matter if i assign a color label through the File menu or right click > label.
    Figured a re-install might fix this but it hasn't (even a clean install without restoring any kind of backup).
    Does anyone else have this issue and/or a fix for it?
    Thanks,
    Jay

    Aaaaanyone ?

  • Can't relink more than 1 file at a time

    I'm trying to relink media I have on an external firewire drive, but when I click Relink, FCP only relinks the first file in my list. The files are all there, in the same location, and have not had any name or reel changes - each one relinks fine individually, but I can't get FCP to link more than 1 file at a time.
    Procedures: I select all the files from a certain reel that are listed as being offline, then File>Reconnect Media. All the files I've selected are listed in the top half of the window, with the first file underlined. I have Search Single Location checked. I select Locate (though same thing happens if I select Search at locate the file myself), Show: Video Files (tho same thing happens if I select All Files), I've checked Match Name and Reel Only (though again same thing happens if this is not checked), and I checked Reconnect All Files in Relative Path. FCP finds the first file, and I click "Choose" - and the first file is listed in the bottom part of the window, but only that file.
    Everything else in FCP works fine. Is it possible I'm running into problems because of the very large number of clips I have in the project (12,000 so far)?
    FCP 6.0 running on G5 dual 2 gig, OSX 10.4.9
    Thanks for any suggestions.
    Tom Valens
    Tamalpais Productions
    Forest Knolls, CA

    That is a bug in FCP 6 and 6.0.1...to fix it you need to upgrade to FCP 6.0.2.
    Shane

  • Is it possible to color tag more than one file at a time?

    I have a Mac Book Air and I have just upgraded to OS X Yosemite.  I love the option to tag files by color.  However it is taking me FOREVER.  I was wondering if there was a way to tag more than one file at a time.

    Welcome to Apple Support Communities
    Hold the Command key and choose all the files you want to tag with the same color. Then, right-click one of those files and select the color tag, so all the files will be tagged with the tag you wanted.

Maybe you are looking for