I tunes 8 won't run

I can't get I tunes 8 to run at all. I've uninstalled and reinstalled it 2x and each time it starts - it aborts before it completely opens with a "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." AppName: itunes.exe AppVer: 8.0.1.11 ModName: itunes.exe
ModVer: 8.0.1.11 Offset: 0000752b
I tried to find ver 7 but could not find a download available.
Any ideas on the problem or where to find v7??
Thanks,

First, does your QUicktime work normally? iTunes cannot work if QUicktime doesn't.
If Quicktime is OK use this troubleshooting article:
http://support.apple.com/kb/TS1421
If quicktime doesn't work, describe what happens with any error message in full.
Go to your control panel and try to start Quicktime preferences, give the full text of any error message.
Have you installed any of the following:
ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter
They are bad news for Quicktime.

Similar Messages

I tunes won't run after enabling mcafee firewall, privacy settings and viru

hello
i completely deleted itunes and quicktime, reinstalled it and it worked until i enable macfee products. when i click on quicktimes it runs but itunes just has the hourglass for 2 seconds and nothing happens.
thanks stick

found answer in another question
thanks

I tunes won't open. No warning message, just the first terms agreement opens and when i agree itunes stopes running. I just wiped and reinstalled everything including windows. I updated everything fully. Deleted spybot unintalled and reintalled new

I tunes won't open. No warning message, just the first terms agreement opens and when i agree itunes stopes running. I just wiped and reinstalled everything including windows. I updated everything fully. Deleted spybot unintalled and reintalled the newest and one older version of itunes. still nothing. I tried to delete some files that is hidden as directed by apple. I have been trading emails with customer support but it has been no help at all. I am running Windows XP. Before i wiped my computer I ran itunes with no problem, on this computer, this week.

WOOOOOOOOOOOO!!!! JUST WANTED TO UPDATE Y'ALL THAT BY SOME STROKE OF HEAVENLY GLORY, ITUNES DECIDED TO WORK AGAIN!!!
WOOOOOOOOOOOOOO!!!
How did I do it you ask??
after all the stuff I updated you about, I tried one last time to install....still didn't work...so once again I wiped my system of everything itunes and apple related
well today I was trying to watch a video that required me to get the quicktime plug in, and it too me to a page that was a quicktime install + itunes 7.blah blah blah instead of the other way around
well, don't ask me why, but low and behold
IT WORKS!!!!
I HAVE MY ITUNES BACK!!! (JUMPS FOR JOY)
Just wanted to share my shear elation

I-Tunes won't open unless I'm connected to the internet

I am a relatively new user to I-Tunes; when I try to open I-Tunes to play a CD or other files in my library, I-Tunes won't open unless I am connected to the Internet. Is this normal?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

HT1212 My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.

My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

CS3 installs but won't run

Ok - not sure if this goes in this section or not.. but it's a technical question.
My b/f bought me a Dell Laptop last week. It has the recommended minimum of everything adobe says it needs for photoshop CS3 (see below for 1721 specs)
When I installed it on the laptop - it was slow, but said it installed. But when I go to open up Photoshop, it opens the screen - and then just hangs. After about 5 minutes it says not responding and I close it. Any of the other programs that came with won't even get that far. I click on them and it gives the little "thinking" circle (as I call it.. lol) and then nothing.
I have read that CS3 has issues with Vista - but their site says the home premium should work. I've also read about 64 bit issues.. but the OS is 32 bit - so it's capable of running 32bit systems... I guess.
I called adobe yesterday after installing and reinstalling CS3 15+ times... with the same issue. I was on the phone for about 2 hours with them. Basically - they have NO CLUE what it would be since it installs fine and opens with no error messages. I checked the log files and there is nothing in there I see that says any kind of error.
I have disable windows defender, uninstalled McAfee and google desktop (all are known to cause issues with CS3), I have ALL non MS startup services turned off.. I have turned off the MS users control.. all suggested by the adobe tech.
I have installed using the run as administrator. Nothing. Created a new admin account and installed on that user and opened on reg admin account. Nothing. (again typical things that correct cs3 install issues)
The last thing the guy said was that it might be a video issue. I checked and there aren't any issues mentioned and no driver updates listed.
We tryed installing this on my b/f's laptop. He bought the exact one I have (except his is red.. mine blue.. lol) and it does the EXACT same thing...
So today we called dell. they say it's a software issue and won't answer any questions for free. Apparently only hardware support is free... But they won't accept this is a hardware conflict with the software..
errrrr
Anybody have any clues on this?
=======================================
LAPTOP SPECS:
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz) Genuine Windows Vista Home Premium
Operating System
Genuine Windows Vista Home Premium
Memory
2 GB DDR2 SDRAM 677MHz (2 DIMMs)
Hard Disk Drive
120 GB SATA Hard Drive (5400 RPM)
Video
ATI RADEON Xpress1270 HyperMemory
Media Bay
8X DVD +/- RW w/dbl layer write capability
Base
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz)
Bluetooth Wireless
Bluetooth Wireless Card 355
Software Upgrade
Microsoft Works 8.5
Premium Pack - Advanced Photo+Music: Deluxe Pack + Paint Shop Pro XI
NoteBook Screen
17 inch WXGA+ TrueLife Glossy Notebook Screen
Hardware Upgrade
No Camera
6 Cell Primary Battery
90W AC Adapter
Network Interface Card
Dell 1505 Wireless-N

Rob - thanks for taking a stab at this.
I have tried installing from the DVD and also from the zip file. the zip file was extracted to the hard drive brfore I ran it - and I ran it as administrator.
And when it stalls - it gives the (NOT RESPONDING) tag on the window - which usually means that even if I leave it (and I have for up to 20 minutes) - still nothing.
Here's the update from my dealings with DEll today...
Dell tech support guy told me that it was a know issue that CS3 WON'T run on Vista and that Adobe is working the issue
Told them that I knew others that were running it on Vista and it worked fine. They had no answer.
Then I waited for the Technical support manger to call. This is after expressing my displeasure to the technical supervisor about them trying to pawn this issue off on anyone else but themselves. Why can't they go grab a 1721 off the shelf and replicate the issue and try to figure it out from there?!?!?!
I used to work on a network helpdesk.. if I tried to pull that crap answer without trying to replicate the issue and AT LEAST try to find an answer.. I wouldn't have lasted very long at all!!!!
The Tech manager told me to call customer support and ask for an OS swap (from vista to XP) because they don't know what the problem is and so it muct be a Vista compatibility issue
I call customer support. They say that they no longer will give out XP since it is a step backwards. And to install XP on the machine ourselves (even a liscensed copy) would void the warranty. They suggest I talk to sales about swapping the laptop out with a "more compatible" one. Which isn't a totally bad idea since I really do think it is an AMD/ATI conflict.
They transfer me to Sales.. ohh - you used the Employee Purchase program.. you need to talk to them.. and they transfer me.
The EPP people tell me.. ohhhh you didn't actually go through us since you bought it off the Dell Outlet store. So they transfer me.
The dell outlet store says they will be more than happy to swap me out to an Intel based machine.
Only catch is the Intels are more expensive. They don't have any for the price we paid for the amd's. Fot about $40 more I can get one with a slower processer, a gig less ram, no dvd writer, but with a 160gb hd. To get compatible to mine - would be about $150 more.
And they only have silver in the low end, and black or brown in the higher. Not that I really give a s@!t what the color is.. but it brings up the main reason I am sooo pissed abput all of this....
Why should I have to pay more money, settle on doing without option/features want/need.. just because THEY don't want to take the time to figure out what the real issue is?!?!?! Why isn't it them doing these calls and doing all this troubleshooting.. Why am I being peanilzed for THEM not wanting to do their jobs....
Told the B/F that I am done with Dell. That I don't want the laptop anymore and I don't want any other one from them. He says he'll pay the extra and get me the other one.. but that isn't the point....
Not sure what my next move is.

How do I install the FM10 licensing fix when Adobe Update Installer won't run?

Adobe Update Installer won't run so can't install FM10 licensing fix
This question is Not Answered.(Mark as assumed answered)
Aug 9, 2013 12:09 PM
Tags (edit): none (add)
Because FM10 began crashing with "fatal" errors whenever I tried to generate a TOC for a small (65 page) book, I researched workarounds and none of them worked. Now that I have delivered a crippled deliverable via Acrobat manipulations, I would like to fix FM. I uninstalled it and reinstalled it, got some updates, and then received the "licensing fix" error that popped up in January. I'm wondering why this fix was included not in the updates. That said, the licensing fix package, first, would not unzip so I downloaded it again. I unzipped it but I got a message that Adobe Updater Installer could not run and after several clicks I found that file. I reinstalled Adoble Update Installer but it still does not run.
I am running Windows XP and have TCS 3.5.I uninstalled FM and RH but not Acrobat, Captivate, or Photoshop.
So, now what? Listen to my supervisor who says never use FM again?
P.S. Why do I have to enter a title for my question and then do it again when this page opens??

Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).

Action steps that won't run correctly in PSE 7/8/9 (but did in 4 and 6)

I have a wonderful action that was written to work in PSE 3/4/6. It won't run in PSE 7/8/9. After fooling around for a while, I think I understand why. Adobe changed the way Adjustment Layers are handled. In earlier versions of Photoshop and Elements, Adjustment Layers threw up a modal dialog box. That changed so that Adjustment Layers now appear in the Palette Bin as a palette.
Here a sample of some of the action steps that won't work correctly:
Make adjustment layer
Using: adjustment layer
Type: levels
Set Selection
To: none
Set current layer
To: layer
Name: “Adjustment 1”
Set current layer
To: layer
Mode: luminosity
Stop
Message: “Move gray slider left”
With Continue
Set current adjustment layer
To: levels
In earlier versions of PS and PSE, the way these steps would work is that a new adjustment layer would be created, the dialog box giving the instruction would open, it would be dismissed by clicking "Continue," and then the "Set current adjustment layer to: Levels" would generate a model adjustment layer dialog box would open up which would let one make the adjustment.
In newer versions, since Adjustment Layers are handled in the Palette Bin, after dismissing the instructions, the action doesn't stop to allow the user to make change the sliders on the adjustment layer.
The action runs perfectly in CS4 and CS5 and throws up the levels adjustment modal box as it did in PSE 4 and PSE 6, but the action doesn't throw the modal box in PSE 7/8/9
Does anyone know of a way to alter the action steps to allow the action to stop to allow the adjustment and then to resume again?

Adding a new levels adjustment layer on top of the Midtone contrast layer
should work, just use a clipping mask to restrict the adjustments to the
areas of the levels adjustment layer below. The histogram will be different, but
actually testing the action is really the only way to know if that makes any difference.
Replacing the levels adjustment layer is another option, though it requires a few more steps.
The following assumes when the action gets to this point,
the Midtone contrast adjustment layer is the active (selected) layer.
To record this part of the action:
1. Duplicate current channel (in the channels panel. drag the Midtone contrast mask
    down to the Create new channel icon at the bottom of the channels panel)
2. Ctrl+click on the newly created channel (Midtone contrast mask copy)
    This loads the selection of that channel.
3. Drag the new channel (midtone contrast mask copy) to the trash icon at the bottom
   of the channels panel.
4. Back in the layers panel, delete the Midtone Contrast adjustment layer.
5. Go to Layer>New Adjustment Layer>Levels
    This creates a new levels adjustment layer using the selection loaded from
    the duplicated channel and opens the levels dialog.
To load the RGB (composite) as a selection, Ctrl+click on the rgb in the channels panel
and the same is true for the red, green and blue channels.
With layer masks, elements doesn't seem to want to load them as selections in actions,
so that's the reason for the action steps above.
MTSTUNER

CS2 won't run

CS2 won't run, says activation code no longer usable. Been running win7 on this system 3 years. Adobe says it won't activate in win7. Well, it did, and ran just fine. what's up?

I assume when you say "Adobe says it won't activate in win7" that you talked to customer support....
A drive change could trigger the need for reactivation. Did you tell them that you're running from a mirrored drive?
It sounds to me that they're being aggressive about trying to get you to upgrade when they should still be supporting you with active maintenance of their activation database.
But unfortunately if you can't get them to adjust their database you're out of luck.
-Noel

Some of the songs I have downloaded onto i tunes won't play when I select it to do so. The error message I get is "The song could not be used because the original file could not be found. Would you like to locate it?" How can I get my songs to play?

Some of the songs I have downloaded into i tunes won't play when I select it to do so. The error message I get is "The song can not be used because the original file can not be found. Would you like to locate it?" When I select yes I'm sent to a screen that has my i tunes library listed. When I select the song in question I'm asked if I would like to open the song. When I select this option I get nothing. The songs I have downloaded must be somewhere because they are listed in my i tunes library and on the screen I've been sent to. I can't the songs to play however. This is not true of all of my songs but it is true of quite a few of them. Actually, one song is too many. How do I get my music to play that seems to be locked up somewhere in the computer?

Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

How do I roll-back to the previous version of Firefox? An auto update occurred and now one of the programs used at the office (ACT! v6.0 SwiftMail) won't run with the browser.

The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
HELP!

Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154]

FMS won't run on RHEL 6.2 EC2 instance - _defaultRoot__edge1 experienced 1 failure

I've got a fresh RHEL 6.2 64-bit instance on EC2. I've turned off the firewall and have installed an FMS 4.5 dev server. In the logs directory I have admin and master logs (only). The admin logs look ok:
#Fields: date
time
x-pid
x-status
x-ctx
x-comment
2012-02-29
09:24:26
1144
(i)2581173
FMS detected IPv6 protocol stack!
2012-02-29
09:24:26
1144
(i)2581173
FMS config <NetworkingIPv6 enable=false>
2012-02-29
09:24:26
1144
(i)2581173
FMS running in IPv4 protocol stack mode!
2012-02-29
09:24:26
1144
(i)2581173
Host: ip-10-204-143-55 IPv4: 10.204.143.55
2012-02-29
09:24:26
1144
(i)2571011
Server starting...
2012-02-29
09:24:26
1144
(i)2631174
Listener started ( FCSAdminIpcProtocol ) : localhost:11110/v4
2012-02-29
09:24:27
1144
(i)2631174
Listener started ( FCSAdminAdaptor ) : 1111/v4
2012-02-29
09:24:28
1144
(i)2571111
Server started (./conf/Server.xml).
The master logs contain these lines, repeating every 5 seconds:
2012-02-29
10:43:17
1076
(i)2581226
Edge (2790) is no longer active.
2012-02-29
10:43:17
1076
(w)2581255
Edge (2790) _defaultRoot__edge1 experienced 1 failure[s]!
2012-02-29
10:43:17
1076
(i)2581224
Edge (2793) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1".
The FMS install failed, complaining about a missing libcap.so until I installed the libcap.i686 package. The following libcap packages are now installed:
libcap.i686
2.16-5.5.el6
@rhui-us-east-1-rhel-server-releases
libcap.x86_64
2.16-5.5.el6
@koji-override-0/$releasever
libcap-ng.x86_64
0.6.4-3.el6_0.1
@koji-override-0/$releasever
libpcap.x86_64
14:1.0.0-6.20091201git117cb5.el6
Any help would be most appreciated.
/Ed.

I had the same problem on CentOS 6.2 x86_64, albeit not on EC2. It seems that the installer creates a symlink to the i686 libpcap (libcap.so.1 -> /lib/libcap.so.2) and fmsedge won't run with it. Manually removing that symlink and instead linking to the libcap.so.2 in /lib64 solved the problem for me.
cd /opt/adobe/fms
rm libcap.so.1
ln -s /lib64/libcap.so.2 libcap.so.1
HTH, Jeremy

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

ITunes won't run at all after updating 10.5

I have recently updated iTunes to 10.5, and now it won't run/open at all. Gives me an error and doesn't even open it at all. I have tried everything apple says to do but nothing has worked so far. Please help me, I really want my iTunes running again! If you need more information/details, please ask. I'd be happy to help you if you're going to help me. :-)

Anyone? Please?

I tunes 8 won't run

Similar Messages

Maybe you are looking for