I Tunes 9.0.2 installs ok but will not update music files and then crashes

Installed the newest update for I Tunes and the install goes well but after rebooting computer as is required for the full update, try to start I tunes player and it tries to update the music files but crashes after it gets about half way through the update of the music files and then the computer wants to send this error message to microsoft: AppName: itunes.exe AppVer: 9.0.2.25 ModName: uplaymeitunesplugin.dll
ModVer: 1.2.0.5 Offset: 000030b1
Then when you send this message to microsoft I Tunes closes. Tried to uninstall the new version but the older version will no longer update my music files and it crashes. Help!!!!

it tries to update the music files but crashes after it gets about half way through the update of the music files and then the computer wants to send this error message to microsoft:
It might be choking on a dodgy content file as it goes to do the library update.
Is it always crashing when it gets to a particular song/video? If so, try removing that file from wherever you have it stored on the hard drive. With it out of the way, does the library update go through properly?

Similar Messages

  • My ipod on my iphone has been replaced by "music" but now it will not play- it started and then crashed after a few seconds- now my music is blank

    Please help, I have installed Icloud on my iphone 4 and now I cannot play any music, my ipod has been replaced by a music file and it jammed after a few seconds of play- after downloading back from icloud.  The music is there somewhere becuase it streams in my car but on the phone the screen is blacnk and I have no controls.
    Thanks for any help
    Jacqueline

    Delete the music in your iTunes library, then go to iTunes store, Quick Link, 'Purchased' to redownload again.

  • DVD Player plays DVDs but will not play VIDEO_TS files from my hard drive

    When logged into my home account DVD Player plays DVDs but will not play VIDEO_TS files that are on my hard drive. I get an error message: "there was a problem opening the media. Media type is not supported." When logged in as "root" DVD player does play these same files. Also, when logged in to my home account, I can play these same files in VLC.

    Go this this thread for more details:
    http://discussions.apple.com/thread.jspa?threadID=1075814
    But the gist of the fix is to delete or rename "~/Library/Preferences/com.apple.DVDPlayer.plist" and let the DVD Player build a new one. It seems that this is caused by a migrated PPC preference that borks DVD Player 5 on Intel Macs, which is what just happened to me. Hope this helps.

  • Firefox will not start and open a website from a Thunderbird email link. It will go to a link from Thunderbird once Firefox is open, but will not initially start Firefox and proceed to open the Thunderbird email link.

    Firefox will not ''start'' and open a website from a Thunderbird email link. A link from Thunderbird will open once Firefox is ''already'' started, but will not initially start Firefox and proceed to open the Thunderbird email link.

    I also have this problem. I cannot open links from a discussion board I frequent nor can I open links from my email. Also after opening my email, I cannot go to any other sites except my home page. I can then go no where else.
    When I close Firefox and try to reopen it, it does nothing! I have to bring up the Task Manager and end the Firefox process before I can get back in.
    To the best of my knowledge, this problem started with the new update to Ver. 3.6.9. I am running Windows XP Media Center 2005

  • I placed my aperture library on a 1 TB external drive (the file is 300 GB) and Aperture churns and churns but will not open the file. I don't know if the file is too large or if it is the external drive or what? any ideas? Smaller files will open.

    I placed my aperture library on a 1 TB external drive (the file is 300 GB) and Aperture churns and churns but will not open the file. I don't know if the file is too large or if it is the external drive or what? any ideas? Smaller files will open. This is very annoying.

    If this is an external USB drive, you must understand that USB is really, really slow. There may be nothing wrong except for that.
    In my opinion, USB external drives are only acceptable for backups, and to get "near Hard Drive" performance, you need FireWire.

  • My photoshop elements12 will not update says error and contact adobe but not open now for help.  windows vista

    my photoshop elements12 will not update says error and contact adobe but not open now for help.  windows vista

    I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Do you really mean the Nikon D60 which shipped in 2008? Was it purchased secondhand?
    The Nikon D60 was first supported in Adobe Camera Raw 4.4.
    Photoshop CS4 ships with Camera Raw 5.0 so it can read D60 NEF files out of the box. No updates required.
    If you do mean the D60 then something else must be going on. e.g. are you using Nikon software to transfer files from camera to computer?

  • TS1717 i tunes installed icon on desk top but will not launch

    i tunes installed but will not launch help please

    Refer steps here to delete SC file(s):
    Win7/Vista http://support.apple.com/kb/TS2363
    WinXP http://support.apple.com/kb/TS1776
    Then proceed to repair your QuickTime. START > CONTROL PANEL
    WinXP - Add n Remove Programs
    Win7/Vista - Programs n Features
    highlight QUICKTIME and click CHANGE then REPAIR.

  • ITunes installs properly, but will not open

    I have just upgraded from iTunes 6.0.1 to 6.0.2
    Everything installed correctly, and I am receiving no error messages; the program simply will not open. I have uninstalled and reinstalled multiple times, and I have exactly the same problem each time.
    My music files (including ones that I purchased from Apple's music store) will open with other players, but will not open with the newly installed v6.0.2
    I am running Norton Internet security, but the problem still occurs after I disable the program.
    Any assistance is appreciated.
    Gateway 400VTX   Windows XP  

    Well, that annoying. So, I am a bit confused here. Does iTunes launch at all or sometimes? BTW, You need to Configure Norton to allow iTunes to open. Otherwise, it will continue to block it silently.
    Do you see, under your Processes tab in your Windows Task Manager, both Quicktime and iTunes?

  • I have a samsung smart tv i want to play my pogo but will not update for me

    i have a samsung smart tv and want to play my pogo but it will not updat for me what do i do

    Your Smart TV uses Google Chrome as its browser, yes?

  • Mac Air storage indicates music storage is big but can not find music files

    I am going in to check the storage on my hard drive. In the music section it says there is 74.14 GB of storage being used but I am unable to locate the files. I have checked everything that can be checked on this mac and no music. Can you please help. I fequently use Final Cut Pro and I know they render files but there are no music files rendered in there. Especially not to amount to that amount of storage. Please Help.

    Download from the Internet OmniDiskSweeper and open it.  It will show all of you files and the respective sizes.
    Ciao.

  • Creative Cloud installer downloads but will not run

    I have downloaded and re-downloaded the Creative Cloud installer but when i click on the download to run it my computer (Sony Vaio windows 8) acts like its trying to but nothing ever happens.
    Specs:
    Sony Vaio
    Intel core i7
    windows 8.0 (have not updated)
    8 gigabytes of ram
    Thanks

    Deathknive you are welcome to review the installation logs for the Creative Cloud Desktop application for specific errors.  Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files.  You are welcome to post any specific errors which you discover.

  • Itunes Installs Correctly, but will not Open

    Hello
    I have downloaded the latest version of iTunes for Windows XP and I installed it correctly yet when I attempt to open it the hourglass appears for a second and then disappears and no iTunes. I tried to open it with the process list in front of me and saw that it indeed opens but then disappears off the list. Please help. I do not have any firewalls running, am an administrator on my computer, have tried uninstalling-reinstalling several time on different Windows accounts but nothing has worked.
    Please help me. Thank You.

    I'm having the exact same problem I think. Spent about an hour on the phone with tech support, installing and uninstalling to no avail.
    Basically, when I would click on the itunes icon, it would try to open.Sometimes, a white EULA screen would pop up VERY fast and close immediately....I couldn't click on anything. Other times, nothing except hourglass. Same behavior as others in task manager.
    Tried opening things up in safe mode and got much further. It wouldn't open everytime...sometimes, I have to shut down in task manager a couple of times, but it would open eventually. Once I couldn't open and had to shut down, but it does eventually open.
    Now here's the important part (I think): After accepting the EULA in safe mode, I get an error message that says " iTunes has detected a problem with your audio config. Audio / Video playback may not operate properly." Everytime I open it now in safe mode, get the same message. In normal mode, iTunes behaves exactly as before (.exe pops up in TM, but does nothing and closes) with no error. So I'm thinking that this "audio config problem" is causing iTunes to shutdown in normal mode.
    I'm still working on figuring out how to get rid of error. I've tried disabling everything under Sound in device manager...no help. I also tried removing Windows Media PLayer's association with all files thinking one file type may have 2 default programs.
    Anyone else with this problem able to confirm similar error? (use F8 during startup to get into safe mode) Let me know if you figure anything out or have ideas of what may be conflicting.
    HP laptop   Windows XP  
    HP laptop   Windows XP  

  • ITunes updates songs, playlists, etc., but will not update iPod options

    When I plug in my iPod (4G, 40GB), everything syncs as it should --songs, playlists, podcasts, etc. The same is true when I manually choose to update the pod. (i.e. from a context menu or somewhere else in the UI) However, I am unable to change any of the options for the iPod. This includes renaming, choosing disk access, etc.
    When I attempt to make these changes from the "Preferences" dialog, iTunes will say "Updating iPod," etc. but while the changes appear in iTunes, they are not actually made on the iPod itself.
    A similar situation occurs when renaming the iPod. Same as before, iTunes "goes through the motions" but doesn't actually change. The difference is that after the iPod is renamed, it will no longer update until the iPod is ejected and reconnected. iTunes gives an error message saying: "The iPod '[New Name]' cannot be updated. The disk could not be read from or written to." The name listed in the iPod's About menu is still the old name.
    Info:
    iTunes version: 6.0.4.2 (Win)
    iPod firmware: 3.1.1
    iPod connected via firewire
    Gateway 500SE   Windows XP Pro   XP Pro SP2, P4 2.0Ghz, 1GB RAM

    iPod freezing up can sometimes indicate a hard drive failure. To determine this, follow these steps:
    Press menu + select until the apple logo appears.
    With the apple logo still on the screen, press and hold select + rewind. You will soon see a screen that says "IRAM PASS HIT PLAY CONTINUE".
    Press play/pause.
    Using the forward button, navigate to "HDD SCAN" and select it.
    Connect your iPod to the wall adapter.
    Allow sufficient time for the scan to complete, it can take a couple of hours. Results such as a "HDD PASS" that appears in seconds or a minute or two, "SCAN NG" or "RD FAIL" indicate the iPod's hard drive is pooched and the unit will have to be replaced.
    Freezing during sync can also happen if the ports are not high powered USB 2.0.

  • With iOS8.1 I can no longer sync MAC iTunes playlists to my iPhone. Purchased new song with iTunes and it is on my MAC but will not update to iPhone when I sync!

    With iOS8.1 I can no longer sync my iTunes MAC playlists to my iPhone!  I purchased a song on Itunes store and put it into a playlist on my MAC.  When I sync (as usual) with my iPhone, the playlist no longer updates to include the new song (i.e., playlist stuck at 16 not 17 songs)... yes, all devices are authorized... If I turn on HOME SHARING it will work, but the moment you disconnect, everything goes away... What is APPLE doing?

    From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
    Take the following steps:
    1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
    2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
    The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
    I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
    Hope this helps!

  • 2nd gen. iPod -software too old but will not update or restore  HELP!!

    Please Help! I've followed all update protocol and itunes 7 is installed, up and running etc, but..
    I hook up the ipod and this message appears:
    Some of the items in the iTunes library were not copied to the iPod "Kit-Ying's iPod" because your iPod software is too old.
    I go to the summary tab in iPod preferences and click Update to get the latest iPod software update.
    I'm looking in the summary and it says 'your iPod is up to date' (so the update button cannot be highlighted)
    The only other option is to click on the "restore" button, which I've done
    over and over again... Only to get:
    'contacting the iPod software update server'
    And nothing happens.
    I cancel and then get this message:
    "there was a problem downloading the iPod software for the iPod "Kit-Ying's iPod". The requested resource was not found.
    Tried manually restoring the thing and as soon as I hook it up again the
    same message appears (software too old etc)
    Am I missing something here as I feel I'm going round and round in circles!!
    PLEASE help me!!!
    ibook   Mac OS X (10.3.9)  

    hmmmmm.
    Some of the items in the iTunes library were not copied to the iPod "Kit-Ying's iPod" because your iPod software is too old.
    in your "Summary" page, is itunes displaying the correct icon for your ipod?
    is a Movies or Photos tab appearing there?

Maybe you are looking for

  • Missing part list is incomplete while creating Production Order and 2 components are not shown in the list.

    Hi Team, We are facing issue for availability check. During creation of Production order, the missing part list is not complete and it should show componenet A in the Missing part list. Below is the details: Production Order quantity: 100 kg Componen

  • Employee data migration CRM

    Hi, I have a requirement to upload the employee data to CRM from Flat file. If any one has done the same , Please advice the approach. I plan to try LSMW. If any one has done through this requirement by coding please share your knowledge. Regards mal

  • To nat destination ip

    nat (inside) 2 0.0.0.0 0.0.0.0 global (outside) 2 202.1.1.2 access-list acl extended permit ip any host 202.1.1.2 access-list policy exetended permit ip 10.10.10.1 192.168.1.1 global (inside) 5 172.16.1.1 netmask 255.255.255.255 nat (outside) 5 acces

  • Why soes a Uniblue systenms pop up appear every time i go on line

    '''I want to know if you support the use of Uniblue systems Is it safe to allow thme to make cfhanges to my computer '''

  • Canon Video to iPhoto or computer !!

    Anyone have an idea of how to get iMac to see USB from Canon digital camcorder ZR700? Trying to get video into Final Cut Express4. Message was edited by: Darrell Hill