I tunes closes after opening with 10.6

Since I uploaded itunes to 10.6 my laptop (Windows Vista 32GB) my itunes opens but then a windows message opens and says it has to close itunes and then it breaks down. I already removed i tunes and installed it again but it happens again
Hope to get some help here.
Thanks in advance!

Restart computer.
Disconnect your computer from the internet and see if you can open iTunes without crash.
if iTunes does open, go to iTunes Menu Edit > Preferences, "Advanced" tab and click the "Reset Cache" button, OK.
Close iTunes.
Now, use Windows Explorer to delete the contents of Music\iTunes\iTunes Media\Download
You may now re-connect your internet then see if you can open iTunes without issues.

Similar Messages

ITunes stops working and closes on opening with Match on, works fine with match off

iTunes stops working and closes upon opening with Match on, works fine with match off

I am having the very same problem with iTunes, I'm running Windows 7 64 bit and started having the problem after the latest update. I just upgraded to the new 5s and was syncing everything to it, so I figured that I would update my itunes software as well. Which I never do after updating one time and had trouble with it on my old laptop and had to rollback to a older version of itunes. I have tried every suggestion that has been posted in the Apple Discussion area and on other websites no luck what so ever. I figured I will wait till Apple comes out with another update and try again. In the post above I am having the exact problem with iTunes. I'd love to know what thef-ing problem is because this is extremely annoying!

Mail does not load the mail after opening with 10.10.3 on macbook air

Mail does not load the mail after opening with 10.10.3 on macbook air

Under Window in the Menu bar select Connection doctor. You will see green to indicate a connection and red to show there is a problem. Except for iCloud account you'll see two entries for each account 1) receiving and 2 SMTP for sending.
If it's red, this usually means it's missing the password.
For Incoming messages, set in the account window, under Account Information tab.
For Outgoing (SMTP) messages, follow these steps:
EDIT SMTP SETTINGS
In Accounts window > Outgoing Mail Server SMTP: select to Edit SMTP Server list... from popup.
Select account in the list.(It's not uncommon to find extra SMTP servers listed. When you remove account, Mail does not delete the smtp info. You might need to do some clean up in the list to remove the extras.)
Under Advanced Tab:
Apple defaults to the default ports (25,465, 587) but some servers prefer a custom port. Check to see what port they recommend. Gmail for example likes 465, Outlook.com 587.
Verify if your server require SSL.
User Name. Enter full email address eg. [email protected]
Add password if it is blank.(If you have two step authentication setup, you'll need to get an app specific password more info)
Open Connection Doctor under Window in the Menu bar.
Do you see green light now for your account SMTP?

Preference for Stack NOT to close after opening an app?

I have stacks with multiple apps that I open in sequence, and for the stack to close after every open, is a cork to my workflow.

Restore your iPad:
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New
Also, see iTunes- Restoring iOS software.

Deleted RAW file after "Open with External Editor"

I opened a file in PS using the "Open with External Editor" command and saved and it saved the update in Aperture but I needed to make anothe change so I did the same as before using the "Open with External Editor" command. Aperture created another "version" so I attempted to delete the version and it deleted all the versions as well as the "Master" RAW file. I went into my trash to find the RAW file and PS file that I wanted to keep but the RAW file was not there. I don't understand why it would put the PS file in the trash but the RAW file is nowhere to be found. Is there another place that it would go?
Dual 2.7 G5 Mac OS X (10.4.8) 5GB RAM

If the master was inside the Library then after deleting it, should be in the Trash, inside a folder called Aperture.
If it was a referenced master it should be still in the location it was unless you ticked the box 'send master to trash', in that case it'll be the same as if it was inside the Library.

Photoshop cc auto-close after opening.

I am new here with adobe cc 2014. i have tried using my photoshop once but after that i can't use it because it auto-closes after loading the program. I don't know how to fix this problem. Can anyone help me with this?

Good day!
Please read these and proceed accordingly (restoring Preferences might be of special interest):
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325
Regards,
Pfaffenbichler

Illustrator CS2 closes after opening

I'm on iMac 2.16mhz Intel, system 10.4.11. Illustrator CS2 closes immediately after opening. I've followed some of the other threads describing this problem and have trashed the Settings and "com." files mentioned in earlier threads, but it still quits. Illustrator opens, then when I try to open a new document it suddenly quits. There are no error messages given that identify the problem. I want to avoid reinstalling the whole Suite, b/c I've already upgraded some of the apps to CS3. Suggestions?

After a lot of trial and error, I noticed an Enfocus Instant PDF in the Plug-ins folder. After I deleted this, it worked fine. For others having this problem, I also found out that Myriad is the default font for Illustrator CS2. If you don't have it activated, it may cause the same crash problem.

How can main vi detect whether sub-vi closes after opening and running it by user?

Hi I learned more using the call by reference node function.
From what I know is that, after opening and running subvi by means of method nodes.
So after running it, "call by reference" node stays active and there is no flow of data coming out of it till it is closed.
However what if I do not want to use this "call by reference" node as I have multiple sub-vis to choose. So how does the main program detect that any one of sub-vi is closed by user?
regards,
Clement

Hi Clement,
first: you may run the vi with the option "wait until completion" set to false, the call-by-reference node will return promptly.
2nd:
There are many options to signal the completion of the subvi to the main vi: globals (easiest, but may lead to race conditions), LV2-style global, queues. You can even check the status of the subvi (running or not) via vi server.
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Flash player plays wrong movie after opening with Rosetta

Hi,
I just had the most peculiar experience. Tried to open a [flashmovie].flv (which in hindsight could be done with Quicktime), Flash START popped up, followed by a pop-up requiring a Rosetta installation. This is the first time I came across Rosetta. Installed it, tried to open the flv again, this started the flashplayer alright but it started a completely different movie.
Opened the same file in Quicktime and that works fine.
Can anyone recommend what to do? Do I have to deinstall rosetta and the flashplayer to prevent this kind of behaviour?

Rosetta could come in handy for other apps you have hanging around, so I suggest you leave it where it is.
To make movies open in QuickTime, select one and press Command-I to open the Information window. In the Open With pane, select QuickTime Player from the pop-up menu. Then click on the Change All button below, and click on the Continue button in the "Are you sure" dialogue box that appears.
You can then throw away the Flash player, unless you prefer it and the developer comes up with a Cocoa/Intel version.
HTH
Archie

CC 2014 closes after opening/starting a new project.

So i called Adobe about this problem on Friday and after an hour and a half of trying stuff, it was all for not.
we ended up getting disconnected, and i didnt feel like calling them again.
once i open Premiere Pro CC2014 all seems good till i try to open a Project or start a new one,
it just immediately closes with out letting me do anything.
The Custmer Support guy tried:
- Reinstalling it.
- updating my graphics card.
- removing some files.
- making a new user on my computer.
all of which didnt work...i really hope that i can get it up and running soon ><

Are you on Windows or Mac, and exactly which operating system version?

Voice Memo Bug, closes after opening

When I open voice memos using Iphone version (6.0.1), the voice memo screen is frozen, an then shuts off after about 2 seconds, returning to the main screen. Also, I am noticing that when I sync to my Powerbook(using Itunes (10.5.8) using Itunes (10.6.3) it seems to Sync the same voicememos every time, as if it's not noticing them as being alreay synced. Any help with this is much appreciated. (I already upgraded to Iphone 5 and am about to buy a new powerbook, but I need to retrieve and make sure all my voice memos go with me, as they are integral to my work).
Thanks,

Ok you can also try closing the app by double tapping the home button and tap and hold on V.memos till it dances(lol) and then tap the little (-) that appears above it, hold the sleep/wake button and home button on you device for about 12-15 secs (when you see the apple release) then launch the app again. It may open as expected after this
If that yields nothing you can try backup/restore see ( http://support.apple.com/kb/ht4946 ) to see that iTunes does in fact include V.memos in backups then see ( http://support.apple.com/kb/ts2529 ) to find where your backup is located on the HD and transfer it to another ( friend or family members ) computer that can get the new iTunes and restore to your iPhone 5
I would make sure that you use caution when connecting your device (old one ) To any new computer. iTunes will prompt you before it removes anything but you cannot get click happy or you may lose data. Go to iTunes Preferences on the devices tab to disable automatic syncing if need be

Acrobat Reader closes after opening PDF from an app-v

So we have a problem with reader version 10.1.0.534. In our company we have most applicaties packaged as an app-v take firefox as an example. Now when we try to open a pdf document from firefox Acrobat Reader opens for a second and then closes again right away. Reader itself is installed on Windows 7 x64 (so reader is not packaged with app-v)
We also have this problem with some business applicaties. Is this a known issue for this Reader version? upgrading reader is a big thing (large company) so if there is a fix in the settings it would help us greatly.

Hi Ronnie,
I am not able to reproduce the exact issue. Sequenced the latest build of Firefox on a system already having Reader 10.1.4, so that the reader plugins gets registered. On the sequencer the PDF is opening up in Firefox. The firefox package is then installed on a client system having Reader 10.1.4. When I open any PDF in firefox on the client, I always get the SaveAs dialog.
How are you sequencing Firefox. Are you making any customizations so that browser extensions work well. In this case browser is working within the virtual environment and might not be able to talk to local Reader.

Itunes close after open

hello,
if i open itunes it says:"itunes doesn't work anymore" and it close the itunes
whad can i do against it?

Assuming you have a variation of iTunes freezes on closing, try the following:
If you are using NOD32 see this article:
http://www.eset.com/support/kb.php?option=com_kb&Itemid=29&page=articles&article id=760
Freeze on closing has also been associated with the bonjour service.
This article tells you about the Bonjour service and how to turn it off as a test:
http://support.apple.com/kb/HT2250?viewlocale=en_US
If you don't need Bonjour and it is causing the problem, you can uninstall it and iTunes will still work except for the features requiring Bonjour.
If that doesn’t work some people have found that uninstalling Apple Mobile Device support works. iTunes works OK without it, but it is required for the iPhone or Touch.

Illustrator CC closes after opening

Illustartor CC closes upon clicking on "Open File" or even maximizing screen.
I am under pressure, as I have a deadline to meet. I uninstalled Illustrator and re-installed. I keep getting "Complete registration" messages. Sure, where's my registration code? Yes, I followed the instructions, as per Adobe's instruction. Nothing! No codes no verifications...nothing!
Help!

Kustomfiend,
Just to make sure: Are the Verdana and Tahoma font families installed and enabled as TTF?
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Acrobat closes after opening an embedded pdf

Hello
I have created a pdf from Framemaker which in itself has a lot of pdf illustrations.
When I click on one of these illustrations, they open in Acrobat but close the master file.
Can I stop this?

Ok, let's see if I've got it this time.
1. You want to make a PDF from a FrameMaker document.
2. In it are placed PDFs as illustrations.
3. You want it to be a normal, single, self-contained PDF.
4. When you look at the PDF, you see the illustrations on screen where you want them.
5. But when you click on those illustrations it closes the PDF and instead opens the illustration PDF that you started with (and closes the PDF you made).
6. And this illustration PDF won't even be on the computers where the end user is looking at the PDF.
Is this right? Especially step 5, is it definitely opening the actual picture file you placed? Or a different one with the picture in it?

I tunes closes after opening with 10.6

Similar Messages

Maybe you are looking for