I-tunes copying all files each time ipod is connected

These are my current settings for sync ( checked) :
Sync only checked songs and videos
Enable disk use
Now, each time I connect ipod, the disk is getting cleared and ipod again copies all the songs right from scratch. Just imagine this going on for 50 Gb+ data, each time I connect my ipod.
Am I doing anything wrong here?

A reset won't delete data from the ipod.
http://support.apple.com/kb/HT1320
A restore will completely blank everything. Since itune's copying everything over each time you sync, though, I assumed all your content was safe on the PC, so restoring (wiping the ipod clean to factory settings) wouldn't "lose" anything.

Similar Messages

IN Premiere Pro CC how can I group copy all files in time line to another part of the time line

How can I group copy all files from one part of the timeline to another part

From the Premiere Pro manual (I believe track targeting matters, too. That is, the targeted tracks only are copied):
Copy command enhanced to operate on a range in a sequence
The existing Copy command (Edit > Copy, Ctrl+C (Windows), Command+C (Mac OS)) is enhanced when used in the Timeline panel. If there are no clips or keyframes selected, and an In Point or Out Point is set, then the range of time between the In point and Out point is copied to the clipboard.

How to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunesb

how to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunes......

Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797

HT1386 My computer was stolen with all my iTunes on it. However, my iPod was not stolen. How do I transfer all files from my iPod to my new computer (purchased files and files I copied from CDs)?

My computer was stolen with all my iTunes on it. However, my iPod was not stolen. How do I transfer all files from my iPod to my new computer (purchased files and files I copied from CDs)?

http://www.wideanglesoftware.com/touchcopy/index.php

Why is TB re-syncing/re-load with GMail all messages each time I open TB? Slows down TB by much each time.

Why is TB re-syncing/re-load with GMail all messages each time I open TB?
It does slow down quite heavily. e.g. It takes almost 5 mins to just write a simple short email, since ''freezing'' at every 3-4 caracters.
All other programs on the computer work fine in the meantime, though. Including word processor. So it is really a TB issue.
Or is it a GMail issue, forcing download everytime a connection is created ?
I am on Win8.1 on an ASUS AiO.
Thanks

IMAP mail accounts see a remote view of the server.
You subscribe to see server Folders.
Headers are downloaded and when you select to view an email, the emails are downloaded to a temp cache to enable quicker access to those emails, but upon exit Thunderbird the temp cache is lost, so you cannot read emails if offline. These emails are not stored on your computer.
If you synchronise subscribed folders, then a copy of the folder is downloaded to Thunderbird Profile folder and stored in an mbox file. This means you can read them even if offline.
However, the folder is set up to synchronise with the server when changes occur, so that your copy and the folder on the server are updated to be the same.
I would recomend that you do not allow folders to get too big as it would take longer to synch.
more info on IMAP:
https://support.mozilla.org/en-US/kb/imap-synchronization
Can you see an 'All Mail' folder?
This is gmails copy of all your emails, so it is gmail Archive of your emails.
This folder can get huge. As it only shows you what you already have in other folders, it also doubles the size of your Profile and can take a while to download. It is recommended that you do not subscribe to see this folder.
Read info at link - under 'all Mail' section:
http://kb.mozillazine.org/Gmail

I have Safari 7.02 installed. Recently, it started to drop all preferences each time I launch the app. Nothing has been added except McAfee Security.

recently installed McAfee Security for Mac. Free download from AT&T. Since then, Safari has been dropping all preferences each time I launch the app. Is it the new install or something else?

Step 1
Uninstall the McAfee product by following the instructions on whichever of the pages linked below is applicable:
How to install or uninstall McAfee Internet Security for Mac
How to manually remove VirusScan for Mac 8.6.x using a removal script
How to uninstall and reinstall McAfee Agent 4.x on Macintosh computers
Note that if you have already tried to uninstall the software, you may have to reinstall it in order to finish the job. If you have a different version of the product, the procedure may be different.
Back up all data before making any changes.
Step 2
Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.Safari.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Does anyone know how to copy my files from my ipod to a different computer?

Does anyone know how to copy my files from my ipod to a different computer? I tried to do it, but all that it did was erase my files. What i want to to is use my ipod to transfer my files to another computer (which has itunes as well) PLEASE help!

You will need to enable your iPod for disk use. Then, you should see your iPod in "My Computer" and you can open up your iPod's folder there and drag the files into it. You can store the files on the iPod, then connect it to the other computer and drag-and-drop them from the iPod into the designated directory in that computer. Make sure individual files are not larger than 4 GB.

Can't copy all files from a CD-R

I have a number of CD-Rs of family photos. I made the disks on a Dell PC with a horizontally mounted CD-RW Drive in 2005. I recently tried to load them onto my iMAC, but I could only copy about half of the files before the drive hung-up. The drive would often make noise and then slow to a near inaudible crawl and then say the file(s) could not be copied.
I was able to copy the missing files to a memory stick at a local library on an HP PC with a horizontally mounted drive, so the disks are OK. Interestingly, I had trouble with the disks at a library with iMAC-like HP PCs, i.e., all-in-one monitor/pc/optical-drive with a vertically mounted drive.
Other drive-related problems: (1) friends have trouble playing Audio CD-Rs I've made for them, (2) I can't copy a DVD-R with MackTheRipper (PowerPC), the DVD-R plays fine.
Is this a drive issue, a drive orientation issue, or something else?
Thanks for your help.

Hi all. I am trying to copy all files from a flash: on a CME to a
usbflash drive. I am able to do so, but only one at a time. Is there
a away to copy all files at one time so I dont have to name them
individually when copying all of them over? Thanks.
Check out the below link hope to help !!
https://cisco.com/en/US/products/hw/routers/ps233/products_tech_note09186a00800a6744.shtml
Ganesh.H

How to see all image types when saving an image without selecting "all files"every time

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/951766]]</blockquote>
Hallo, and thank you for reading this.
I am a person who saves a lot of images online and renames them in different folders in different names like B - 34 or G - 56. I have been working with firefox 10 for quite some time and it had a pretty handy bug (I guess) where I could save an image and firefox would just save the image in it's original type (JPEG,PNG etc) while "save as type" was empty.
It also always has shown all the image types in the folder where I save the images (except for GIF) and that helpes me quite a lot by saving me the trouble of selecting "all files" every time I save or going to the folder to rename every image.
Now this seems to be lacking in the newest firefox versions and my question is if I can set firefox to always show me all the image file types when saving an image, instead of only showing JPEG's when I try to save a JPEG.
Thank you for your time.

I suspect this is a Windows problem. I am surmising the FilePicker uses the Operating System or Desktop facilities. Does Windows 7 offer any other file categories like ''images'' ?
I do not normally use Windows 7, but may the option depend upon the directory being an indexed one, I ask after finding this thread ''Bring File types tab back'' [http://www.windows7taskforce.com/view/819]
This question is a duplicate of [/questions/951764]
Normally I would lock the duplicate question, but in this instance I will leave it open as it is unanswered and someone may give a better reply.

Using Terminal to copy all files (hidden and not hidden) and folders from one place to another

How -using Terminal- can I copy all files (hidden and not hidden) and folders (and their contents) from one place to another

ditto
DITTO(1)                  BSD General Commands Manual                 DITTO(1)
NAME
     ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
     ditto [-v] [-V] [-X] [<options>] src ... dst_directory
     ditto [-v] [-V] [<options>] src_file dst_file
     ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
     ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ...
           dst_directory
     ditto -h | --help
DESCRIPTION
     In its first form, ditto copies one or more source files or directories
     to a destination directory. If the destination directory does not exist
     it will be created before the first source is copied. If the destination
     directory already exists then the source directories are merged with the
     previous contents of the destination.

HT4972 do I need to copy all files on my iphone to update from 4.3.3 to 6.3

do I need to copy all files on my iphone to update from 4.3.3 to 6.3

Read the instructions in the article from which the statement was posted.

Store and refresh saved file each time.

Hello,
I am writing program to save the inputs (String cmd) .I store it in seperate text file using FileOutputStream(filename).
My problem os i am not able to refresh the contents of file each time i press the button save.
I m use,
FileOutputStream o=new FileOutputStream(filename,true).
when i try to clear the saved text file,
I give, o.reset (filename);
but, it gives error.
I think o.reset() not define for FileOutputStream function.
what can I do.
how can I reset the text file(file.txt) each time.
I need each time the input is given, the file already strore must erased and store the new inputs.
thanks in advance.

Just write a new file, it will delete the existing data and overwrite it, unless you specified "append" in the constructor.

Copy All Files From Folder1 To Folder2

I need a powershell script that will copy all files (not shortcuts, omit those) from folder1 to folder2. The files are various types ranging from file folders (will want the contents of the folders copied as well) to .xlsx, .docx, .tiff, .jpg etc
(and more).

Hi,
You can check the repository if you're looking for prewritten scripts:
https://gallery.technet.microsoft.com/scriptcenter
If you don't find what you need and you can't write your own, you can request a script here:
https://gallery.technet.microsoft.com/scriptcenter/site/requests
If you want to try to tackle this problem on your own, I'd suggest looking into Copy-Item or just using robocopy.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

How do I copy music files from an iPod 5thGen to a new iTunes installation?

My old WinXP computer crashed & burned (literally). I installed iTunes (11.2.2.3) on my new Win7 PC. How do I copy all my music from my 5th Gen iPod into the new iTunes? My music collection contains only MP4 files ripped from my CD collection--nothing purchased from the iTunes Store. I located a folder named Apple on one of my old flash drives which contains a subfolder named iTunes Music. That folder contains subfolders for each of my original CDs with MP4s for all the tracks. Could I use those files to restore my music to iTunes?

If is a MicroSD card you'll need a MicroSD to SD card adapter. Something like this.
Once you have one of those just insert it into the SD card slot on your Mac then open a Finder window and select all the images and press Command + c to copy then go to the folder you want to put them in and select it and press Command + v to paste to that folder.

I'm trying to write a VI that updates a file each time it is run, but on a new day a new file is created which is updated until a new day begins.

I have written a VI to create and update a file as many times as needed on any given day. On any subsequent day a new file is created which for that day will be updated each time the VI is run and so on. The problem is that when I run the VI the first time of a new day, ie when the file is created only data is written to the file and not the header data. When the file is appended, header data, and regular data is properly written to the file. Can anyone tell me how to correct this problem? A copy of the VI that I wrote is attached.
Thanks,
Chuck M.
Solved!
Go to Solution.
Attachments:
File - create new on date change.vi ‏15 KB

You had the header information written when there wasn't an existing file, then you overwrote that file with another file consisting only of the data because you wired the "append to file? (new file:F)" the same for both functions (F causes it to create a new file). I put the header writing function in a Case structure because you only want it to execute when this is a new file (otherwise it'll overwrite what's there). Wire the path straight through the False case. I wired a TRUE to the data writing function to always append (because there will always be a file by the time the program gets there).
Jim
PS - a few other observations
Avoid sequence structures
You don't need the property node
Use Path functions (not string)
Message Edited by jcarmody on 04-13-2009 05:58 PM
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice
Attachments:
examp.jpg ‏19 KB

I-tunes copying all files each time ipod is connected

Similar Messages

Maybe you are looking for