I Tunes for Windows 7, Compatibility Issues

When I try to download I Tunes it states it has downloaded successfully. However, I have no sound when I am in this application. In addition, when I try to open I Tunes I get the message that it has been set to a previous version of Windows, and for best results I need to turn off compatibility mode before opening I Tunes. How do I do that? Can anyone tell me how I can download this program successfully? It has been very frustrating as it appears to not be compatibile with Windows 7.

However, I have no sound when I am in this application. In addition, when I try to open I Tunes I get the message that it has been set to a previous version of Windows, and for best results I need to turn off compatibility mode before opening I Tunes. How do I do that?
With that, let's first try the suggestions from the following document. *(Make sure that all of the boxes in the Compatibility tab are unchecked,* not just the compatibility mode setting itself.)
[iTunes for Windows: How to turn off Compatibility Mode|http://support.apple.com/kb/TS1489]
If you're still getting the compatibility mode message even though you have all the boxes unchecked in the Compatibility tab, you may have an errant setting in your registry. For Windows 7 troubleshooting advice on that possibility, see RandomBehavior's post in the following thread:
http://discussions.apple.com/message.jspa?messageID=10397771#10397771

Similar Messages

  • Office for Mac and Office for Windows XP compatibility issues?

    Trying to convince a family member to make the Mac switch. She uses Office for Windows XP at work but might use Office for Mac at home. Will there be an compatibiity issues with the programs? She is a heavy Excel user and takes a lot of work home. If she has to rearrange cells and fonts and such each and every, it would drive her (and the rest of us) insane.
    Any advice would be most welcome.
    She is looking into either a Macbook Air or Macbook Pro. Putting Windows on the Mac is not really an option for us.
    Thanks Community!

    Or I could just download the trial version and see how that works.
    http://www.microsoft.com/mac/trial
    Thanks for putting me in the right direction, anyway!

  • I-Tunes for  Windows with  Lame

    How about not using the I-Tunes for Windows MP3 encoder, and encoding with Lame ? Is this possible ? From where can I get the plug-in ? does it really work ? Pros and Cons ?
    Thanks for the comments
    Elvert

    Thanks Joe for your help. I will check back. I would like to rip with I-Tunes for Windows and encode with the Lame plug-in ( it seems it is available only for Mac). I know EAC is excellent in Secure Mode, but it comes with Freedb (no composer tag info) and not CDDB/Gracenote that comes with I-Tunes and shows composer tag. The composer tag is of extreme importance to me when ripping my Jazz cds.
    suse Lame, but not EAC. Eac uses freedb and not CDDB/GRacenote. I

  • I tunes for windows xp 6d bit

    i want i tunes for windows xp 6d bit
    Regards
    Sunil.

    There is no version of iTunes that supports the 64-bit version of Windows XP and never will be. If you search this forum for "XP 64"or do a web search for something like "iTunes Windows XP 64",  you'll find threads describing the process some people have used to "crowbar" iTunes onto XP 64, with varying levels of success, none of them complete.  
    Regards.

  • I-tunes for Windows XP Professional x64

    I tried a lot to find out i-tunes for Windows XP Professional x64 bit
    but i didn't get any solution for installing i-tunes in my laptop which had Windows XP Professional x64 bit.
    when i asked to other person then at last i found only one reply that,
    "If i want to install i-tunes in my laptop then i has to CHANGE OPERATING SYSTEM

    iTunes is a 32 bit program.
    The 64 bit installer has 64 bit drivers for burning and the iPhone.
    If you don't have an iPhone you should be able to install the 32 bit iTunes and then download the 64 bit Gear drivers for burning from the Gear download site:
    http://www.gearsoftware.com/support/drivers.cfm
    You may need to enable scripts if you are using Firefox with Noscript.
    If you have an iphone and want to try to get the 64 bit installer to work here are some links that may help:
    http://yukichigai.googlepages.com/iphonex64
    http://pctech.invisibill.net/?page_id=36
    http://skunkwerks.wordpress.com/2008/04/13/getting-itunes-to-work-with-windows-x p-x64/

  • Could anyone assist with a quicktime for windows platform compatibility source?

    I am trying to find a good source for Quicktime for Windows platform compatibility.  I was unable to find anything on the apple support site for legacy versions, any assistance would be greatly appreciated.

    I'm not certain what it is you're looking for, but perhaps this will give you the information you need:
    http://en.wikipedia.org/wiki/QuickTime#Platform_support
    Regards.

  • TS3212 I'm trying to download i tunes for windows 8 but it will not complete the process?

    I'm trying to download i tunes for windows 8 but it will not complete the process

    does it give you an error message?

  • ICloud for Windows/Windows 10 Compatibility Issue

    2 days after the Windows 10 upgrade I began to get a constant refresh of the desktop and system tray (every 2-3 seconds). Also saw a pop up stating that iCloud could not access photos due to permissions (of course I am the Admin of the machine). No control over Start Menu button (non-responsive) If flashing/refresh did finally stop, or I manually stopped it (more on that in a moment) the "Edge" application (IE replacement) errored with inability to register. Reboot with WI-FI off and system came up OK. As soon as I turned on WI-FI desktop refresh resumed. sfc attempt did not clear issue. Repair of iCloud (version 4.1.1.53) did not clear issue. Completely uninstalled iCloud for Windows, and problem ceased. Laptop booting OK on Wndows 10. Apple/iCloud site not reporting what the newest version is, so not bothering to try a new install. It would appear there is a compatibility issue with Windows 10; would be interested if any other users have experienced same.

    Just picked up your message via a search.  Yes - I have exactly the same problem that you describe.  Have tried changing permissions but when re-starting after close down the same message appears again and PC goes into meltdown.  As you, have now  managed to delete iCloud and all working fine.  This is on my desktop PC.  Oddly I have another machine (laptop) and this problem has not occurred and iCloud not affecting Windows 10 at all!

  • Windows 8 Compatibility issue -

    I just ran the MS Windows 8 compatibility test on my Windows 7 system... a number of programs were flagged, including iTunes.. however, the action to be taken seems vague:  a yellow caution symbol was displayed with the words, "remove authorized PCs"
    What does that mean?  Do I need to deauthorize my PC before doing the upgrade?  Do I need to uninstall iTunes? (I am running v.11) And then reinstall it after upgrading to Windows 8? 

    Ok, no replies.. so here is what I found out....
    It seems that you can have up to 5 computers authorized to use iTunes.  If one of the computers that is being upgraded to Windows 8 is one of those 5, you may need to deauthorize iTunes before the install.  Why? Because apparently the new install treats the system as a new system, so in order to keep your authorized systems under 5, it may be necessary to deauthorize before the install, then reauthorize again after the install.
    Of course, if this is the only computer authorized, then no biggie.. you will end up with two authorized systems and everything should still hum along. The only concern is if you already have 5 computers authorized, then you need to use this process to ensure that iTunes will still work after the install.
    Odd that iTunes would be so picky... Adobe is infamous about software activations - insisting on the product being deactivated before uninstalling and reinstalling... but no concern here about upgrading to Windows 8
    Hope that helps some others that had a question about this item.
    Oh, and btw.. make sure your notebook manufacturer has drivers for Windows 8 - Microsoft had stated that the upgrade from Windows 7 to 8 would be smooth and hiccup free.. but no mention of drivers. Seems there could be issues with drivers. I have a relatively new ASUS G53SW, and apparently ASUS does not have any drivers for Windows 8!

  • Windows 7 compatibility issues with Studio 8

    Hi guys,
    Sorry if this question has been asked before.
    I can't afford to upgrade my Studio 8, and I would ideally like to install it clean on my Windows 7 rig which is working fine.
    I understand that there is an issue with Flash and Windows 7, and I would like to know what it is (and how serious), and also whether there are any other compatibility issues that would make problems for myself.
    Any advice gratefully received.

    If compatibility is important to you, your best best is to run a virtual machine in your Windows 7 64-bit installation.  You can do this using Virtual PC as part of Windows 7 Professional or Ultimate, or via VMWare's Player software ( http://www.vmware.com/products/player/ ).
    Also just a reminder that CS5 betas are planned for later this year and Adobe typically only allows you to upgrade from the previous 3 versions (Studio 8 = CS2, CS5 will be the last version) and some of the Creative Suite applications are going to be 64-bit only(a couple products have updated FAQs stating this fact).

  • Intel Mac?  End of Windows-Apple compatability issues?

    So, i'm a noob in the world of macs. when apple comes out w/ intel based notebooks and computers, will this mean you will be able to run pc only programs on the new intel macs? educate me, i've tried to research my question, and pretty much came up w/ no straight forward answer.
    -Ian

    thanks for the responses. if you have anything else to add, please do so.
    the main reason i bring this up, in which you can see in my other thread i posted, i'm looking to buy an apple laptop. but as a student majoring in electrical engineering, there are compatability issues. nonetheless, i'm pretty much set on buying an apple laptop, despite the issues. i will be doing what ifelix has stated, and use vpc to run any programs that i need to. and if worse comes to worse, i still have a desktop pc running windows, so i can just use that if vpc isn't working out for me.
    seeing as to how i'm already writing in this post, i'm going to ask some questions:
    i plan on buying a powerbook- faster, etc. but if i chose to buy an ibook, will that be able to run vpc as well as the powerbook? would i need to just throw in some more memory to get it up to par w/ the powerbook? b/c i love the design of the powerbook (a couple of my friends have one) but the ibook is like a couple hundreds of dollars cheaper.
    throw in some knowledge if you can.
    thanks again
    -ian

  • SSDT - BI for VS 2013 compatibility issues

    Hi all,
    I've installed on my Windows 7 x64 development machine (in the given order): 
    1) SQL Server Developer Edition 2014  x64
    2) Visual Studio Professional Edition 2013 with Update 3 x86
    3) SSDT - BI for VS 2013 x86 (12.0.2430.0 => latest version) 
    After migrating my SSIS 2008 solutions in VS 2013 (using the SSIS package upgrade wizrd), I discovered that the property
    ScriptLanguage of my C# script tasks show "Microsoft Visual C#
    2012".
    Trying to edit any of those scripts the "Program compatibility issues" shows up for Visual Studio 2012, but, I'm using Visual Studio 2013 !
    Is there something wrong with my installation order or SSDT - BI not really compatible with VS 2013 ?

    Hi guestMS,
    According to your description, the ScriptLanguage property of C# script tasks show "Microsoft Visual C# 2012” in SSDT-BI for VS 2013.
    After testing the issue in my environment, I can reproduce it in SSDT-BI for VS 2013. And I find that the ScriptLanguage property of C# script tasks show "Microsoft Visual C# 2010” in SSDT, and show "Microsoft Visual C# 2012” in SSDT for SSDT –
    BI for VS2012. It shows incorrect only in SSDT-BI for VS 2013.
    So it seems that the issue is that the ScriptLanguage property of C# script shows incorrect. But we can execute the task without any problem. If you concern about this, it is my pleasure to help you to reflect your recommendation to the proper department
    for their consideration. Please feel free to submit your situation on our product to the following link
    https://connect.microsoft.com/SQLServer/. Your feedback is valuable for us to improve our products and increase the level of service provided.
    Thank you for your understanding.
    Regards,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

  • Windows 10 Compatibility Issues

    I want to upgrade to the new Windows 10 Operating System. Apparently, this is going to be a compatibility issue with my laptop. I have the AMD Radeon HD 7640G Graphics Card. It would seem Windows 10 doesn't like this. How can I correct this problem before the release date in July? Thanks.

    Your PC ran into a problem and needs to restart.
    We're just collecting some error info, and then
    we'll restart for you. (percentage counter)
    I have an HP LAPTOP WITH AN AMD10 AND 6GB OF RAM, RUNNING WINDOWS 7 PRO. TRYING TO UPGRADE TO WINDOWS 10. GETTING ERROR. HAVE TRIED 4 TIMES DIFFERENT WAYS TO UPGRADE AND KEEP GETTING ERROR AND FAILURE AT THE END...
    Your PC ran into a problem problem and needs to restart. We're just collecting some error info, then we'll restart it for you.
    If you'd like to know more about this error: IRQL_NOT_LESS_OR_EQUAL
    NEVER RESTARTS, NEVER FINISHES UPGRADE. WHERE IS MY PROBLEM. DO I HAVE TO DO CLEAN INSTALL OF WINDOWS 10, OR WILL PROBLEM REMAIN OR GET WORSE? SHOULD I RESTORE MY LAPTOP FIRST FROM HP RECOVERY PARTITION, AND THEN UPGRADE?

  • I-Tunes for Windows - I-pod Sync

    HI,
    I have the new windows 8.1 and the new i-Tunes 64bit downloaded and installed. I cannot see my i-pod anywhere on my i-tunes and cannot sync my i-pod. Please help as I have uninstalled and installed 6 times in the past few months and not getting anywhere and trouble shot a lot too.
    This would make my christmas if it got sorted!
    Cheers
    Stevo

    Hi Stevo,
    Thanks for visiting Apple Support Communities.
    If your iPod touch is not recognized by iTunes for Windows, be sure to try all of the steps in this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Best,
    Jeremy

  • I Tunes for Windows

    Hi All
    why can I not download Itunes for windows the I click on down load now.
    A popup appears asking me to save the file " itune64setup.exe" I click save then nothing.
    Bob

    See the Further Information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
    tt2

Maybe you are looking for

  • Random words disappear from pdf and printed page

    I work for a newspaper and we have had an ongoing problem from week to week of random words dropping off pages. It happens with the same font family each time but usually only occurs on one page a week. These fonts are used throughout the entire pape

  • Inactive DataSource  - two clients in Development System

    Hi, I have two developement clients 100 and 130. What ever changes I make in Client 100, it is supposed to reflect in Client 130. We use developement Client 100 to make any changes and use Client 130 to extract/trasnsfer data to BW system.  I activat

  • HELP!  Placing Overweb3D Snipet Does Not Work

    First let me say that I converted to the "Dark Side" about 6 mos. ago by purchasing a MacBook Pro. All I can say is "****...why didn't I do this years ago?". However I've been a systems engineer for much of my professional life so not using a PC wasn

  • My computer in my local network

    I recently bought a mac pro and am using an airport extreme base station. I need to access my computer on the local network but somehow I have made it invisible! I think i turned something off but now I need to make it visible again to other computer

  • PSP Sync

    I have an eMac G4, and I want to put a Garageband song onto my PSP. I exported my song to my iTunes, which worked fine. I could play the song and all, and it sounded great. I then proceeded to transfer my song onto my PSP. When I synced the PSP it sa