I Tunes for WIndows wont start after upgrade to 8.0.1

I recently upgraded to iTunes 8.0.1.11. After upgrade, if for some reason I need to reboot my computer iTunes will not start. It took forever to finally figure out what it was. I couldn't sync my iPod, could not get on to iTunes , etc. I finally had to try to uninstall Bonjour to make it come up. The problem is that I can never fully uninstall Bonjour. It says I do not have sufficient privileges. It will be ok until I have to reboot again or turn off my computer. I then have to try to uninstall bonjour to make it come up again. Is there a fix for this bug so I don't have to go through the same procedure every time I reboot?

As far as the sufficient privileges go.
You may wish to temporarily disable User Access Control (UAC)
This should then give you permission to complete the uninstall process like you have been doing. Also ensure you are an Administrator user on the account. That right away will cause the message to appear if you are not.
You want to ensure this gets turned back on if you do not have adequate security protection such as
-Firewall Software
-Anti Virus Software
-Spyware/Adaware Software
To Turn UAC off in the easiest way possible
-Launch Control Panel
-Launch User Accounts
In this Window you will see an option called "Turn User Access Control ON/OFF" Click on this. A simple pop up window will appear. If it has a check mark in the box. Un-check it. Reboot. UAC is now off.
Windows security will notify you of this. Feel free to ignore it while you try to uninstall again. Repeat the steps above to turn it back on when you are ready.
By any chance have you tried a Basic Uninstall of Apple Software? and then Run the iTunes Setup file in Administrator Mode?

Similar Messages

  • Itunes wont start after upgrading for iPhone

    has anyone had this problem after upgrading itunes? I downloaded the new software and it appears to install fine (I even restarted my laptop) but when I click on itunes or quicktime, nothing happens. I've checked the processes list to see if its running and it shows that applemobiledevice.exe, ipodservice.exe, launchapplication.exe ituneshelper.exe are running. can anyone help? I'd really like to sync my calendar and contacts.
    thanks

    Hi chrisr2sf;
    Since this is the iPhone forum where you posted you might have more response if you post over in the iTunes for Windows forum instead.
    Allan

  • Post ios5 update -- videos for ipad2 wont start after adding album art using get info

    this never happened w ios4. before, i could manually add posters on my movies using get info. but now, everytime i add posters the movie wont start. i wanna enjoy my movie playlist complete with movie posters/ cover art. do you experience the same prob?

    Just added new art to two albums in iTunes v7. One the old way (Google Images then a drag and drop) and the other asking iTunes to get it for me. Only the art that was added manually has moved over to the iPod, which is 5th Generation 30GB.
    It's not the worst thing in the world seems as I never had that art before anyways. I'm sure an update will be out soon it is a .0 release and I imagine they is lots of things under the hoot getting us ready for OS X 10.5.
    iMac 2GHz Intel Core Duo, 1.5 GB RAM.
    iBook G4 1.5 GB RAM.   Mac OS X (10.4.7)   5G iPod 30GB
    http://web.mac.com/vyvyenne/

  • OIM 9.1.0.2 wont start after upgrade

    I have upgraded OIM 9.1.0.1 to 9.1.0.2 following the document from the patch.
    On running xlStartWLS.cmd to start the WebLogic domain - The command window just closes off in a second. Below is the output from xlStartWLS.cmd command
    I couldn't figure-out what could be the problem. The setup is on Windows Stand-Alone machine.
    ===================================================================================
    C:\bea\user_projects\domains\OIM\bin>setlocal
    C:\bea\user_projects\domains\OIM\bin>SET XLHOME=C:\OIM\xellerate
    C:\bea\user_projects\domains\OIM\bin>SET EXT_POST_CLASSPATH=C:\OIM\xellerate\ext\jdbcpool-0.99.jar;C:\OIM\xellerate\lib\xlLogger.jar;C:\OIM\xellerate\ext\log4j-1.2.8.jar;C:\OIM\xellerate\lib\xlUtils.jar;C:\OIM\xellerate\lib\xlCrypto.jar;
    C:\bea\user_projects\domains\OIM\bin>call C:/bea/user_projects/domains/OIM\bin\setDomainEnv.cmd
    "Sun JAVA"
    JAVA Memory arguments: -Xms1280m -Xmx1280m -XX:PermSize=128m -XX:MaxPermSize=256m
    WLS Start Mode=Development
    CLASSPATH=;C:\bea\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea\JDK160~1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSERV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_10.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\bea\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;C:\bea\WLSERV~1.3\server\lib\xqrl.jar;C:\OIM\xellerate\ext\jdbcpool-0.99.jar;C:\OIM\xellerate\lib\xlLogger.jar;C:\OIM\xellerate\ext\log4j-1.2.8.jar;C:\OIM\xellerate\lib\xlUtils.jar;C:\OIM\xellerate\lib\xlCrypto.jar;;;
    PATH=C:\bea\patch_wlw1030\profiles\default\native;C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\default\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bin;C:\bea\modules\ORGAPA~1.5\bin;C:\bea\JDK160~1\jre\bin;C:\bea\JDK160~1\bin;C:\bea\patch_wlw1030\profiles\default\native;C:\bea\patch_wls1030\profiles\default\native;C:\bea\patch_cie660\profiles\default\native;C:\bea\WLSERV~1.3\server\native\win\32;C:\bea\WLSERV~1.3\server\bin;C:\bea\modules\ORGAPA~1.5\bin;C:\bea\JDK160~1\jre\bin;C:\bea\JDK160~1\bin;C:\oracle\OHTTP13\bin;C:\oracle\OHTTP13\jlib;C:\OraHome\bin;C:\OraHome\jdk\jre\bin\client;C:\OraHome\jlib;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\bea\WLSERV~1.3\server\native\win\32\oci920_8;C:\bea\WLSERV~1.3\server\native\win\32\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    Starting WLS with line:
    C:\bea\JDK160~1\bin\java -client -Xms1280m -Xmx1280m -XX:PermSize=128m -XX:MaxPermSize=256m -DXL.HomeDir=C:\OIM\xellerate -Djava.security.auth.login.config=C:\OIM\xellerate\config\authwl.conf -Dlog4j.configuration=file:/C:\OIM\xellerate/config/log.properties -Djava.awt.headless=true;\OIM\xellerate\ext\ojdbc14.jar -Xverify:none -da -Dplatform.home=C:\bea\WLSERV~1.3 -Dwls.home=C:\bea\WLSERV~1.3\server -Dweblogic.home=C:\bea\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\bea\patch_wlw1030\profiles\default\sysext_manifest_classpath;C:\bea\patch_wls1030\profiles\default\sysext_manifest_classpath;C:\bea\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=AdminServer -Djava.security.policy=C:\bea\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
    Error occurred during initialization of VM
    Could not reserve enough space for object heap

    Thanks Kevin. After reviewing the log file; the only problem I found is below.
    But, all the other operations like copy/modify/create/delete went well. The complete log can be found Here
    Do you think the upgrade Failed ? The log shows only it failed tried to delete nexaweb.log files
    Thanks Much !
    =========================================================================================
    BUILD FAILED
    C:\OIM\xellerate\Setup\setup.xml:448: The following error occurred while executing this line:
    C:\OIM\xellerate\setup\***-setup.xml:266: Unable to delete file C:\OIM\xellerate\OIMApplications\WLNexaweb.ear\Nexaweb.war\logs\nexaweb.log
         at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(ProjectHelper.java:539)
         at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:384)
         at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         at org.apache.tools.ant.Task.perform(Task.java:364)
         at org.apache.tools.ant.Target.execute(Target.java:341)
         at org.apache.tools.ant.Target.performTasks(Target.java:369)
         at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
         at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
         at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
         at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
         at org.apache.tools.ant.Main.runBuild(Main.java:668)
         at org.apache.tools.ant.Main.startAnt(Main.java:187)
         at org.apache.tools.ant.Main.start(Main.java:150)
         at org.apache.tools.ant.Main.main(Main.java:240)
    Caused by: C:\OIM\xellerate\setup\***-setup.xml:266: Unable to delete file C:\OIM\xellerate\OIMApplications\WLNexaweb.ear\Nexaweb.war\logs\nexaweb.log
         at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:594)
         at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:587)
         at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:587)
         at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:587)
         at org.apache.tools.ant.taskdefs.Delete.execute(Delete.java:498)
         at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         at org.apache.tools.ant.Task.perform(Task.java:364)
         at org.apache.tools.ant.Target.execute(Target.java:341)
         at org.apache.tools.ant.Target.performTasks(Target.java:369)
         at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
         at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:37)
         at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
         at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:382)
         ... 12 more
    --- Nested Exception ---
    C:\OIM\xellerate\setup\***-setup.xml:266: Unable to delete file C:\OIM\xellerate\OIMApplications\WLNexaweb.ear\Nexaweb.war\logs\nexaweb.log
         at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:594)
         at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:587)
         at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:587)
         at org.apache.tools.ant.taskdefs.Delete.removeDir(Delete.java:587)
         at org.apache.tools.ant.taskdefs.Delete.execute(Delete.java:498)
         at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         at org.apache.tools.ant.Task.perform(Task.java:364)
         at org.apache.tools.ant.Target.execute(Target.java:341)
         at org.apache.tools.ant.Target.performTasks(Target.java:369)
         at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
         at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:37)
         at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
         at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:382)
         at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
         at org.apache.tools.ant.Task.perform(Task.java:364)
         at org.apache.tools.ant.Target.execute(Target.java:341)
         at org.apache.tools.ant.Target.performTasks(Target.java:369)
         at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
         at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
         at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
         at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
         at org.apache.tools.ant.Main.runBuild(Main.java:668)
         at org.apache.tools.ant.Main.startAnt(Main.java:187)
         at org.apache.tools.ant.Main.start(Main.java:150)
         at org.apache.tools.ant.Main.main(Main.java:240)
    Total time: 16 minutes 56 seconds
    Edited by: Notorious Non-Confirmist on Sep 25, 2009 11:36 AM

  • Windows not starting after upgrading to 8gb of ram on Dv6 3200

    I have a dv6 - 3220tx with Windows 7 64bit Home Premium
    When I start the laptop with the 2 sticks of PC3-12800 4gb ram installed it will start and go the screen where it has told me that windows has had an error and asks if i would like to "start windows normally, or launch start up repair. If i choose start windows normally, it will go to the screen where it says "starting windows" and revert back to the Hp screen then to the same "start windows normally or.." screen. Same thing happens when i choose to launch start up repair. 
    If i choose to use just 1 stick of the new ram in either slot then it will do the same as above however instead of going to "starting windows" it will go to a blue screen saying either BAD_POOL_ERROR or DRIVER_IRQL_NOT_LESS_OR_EQUAL. 
    If i remove the newly installed ram and and use the one shipped in the unit the laptop will start just fine.
    This question was solved.
    View Solution.

    Hi,
    It will accept DDR3 PC3-8500 or DDR3 PC3-10600. This implies it may not accept 12800. I have not tried 12800.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • VIBE wont start after Upgrade to VIBE4

    Hello,
    I tried to upgrad our VIBE 3.4 to new Verson 4 how it is explained in documentation.
    If I try to start VIBE now I get the following error in catalina.out:
    Apr 23, 2015 12:24:08 PM org.apache.catalina.core.StandardService initInternal
    SEVERE: Failed to initialize connector [Connector[HTTP/1.1-8443]]
    org.apache.catalina.LifecycleException: Failed to initialize component [Connector[HTTP/1.1-8443]]
    at org.apache.catalina.util.LifecycleBase.init(Lifecy cleBase.java:106)
    at org.apache.catalina.core.StandardService.initInter nal(StandardService.java:559)
    at org.apache.catalina.util.LifecycleBase.init(Lifecy cleBase.java:102)
    at org.apache.catalina.core.StandardServer.initIntern al(StandardServer.java:821)
    at org.apache.catalina.util.LifecycleBase.init(Lifecy cleBase.java:102)
    at org.apache.catalina.startup.Catalina.load(Catalina .java:638)
    at org.apache.catalina.startup.Catalina.load(Catalina .java:663)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:95)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:56)
    at java.lang.reflect.Method.invoke(Method.java:620)
    at org.apache.catalina.startup.Bootstrap.load(Bootstr ap.java:280)
    at org.apache.catalina.startup.Bootstrap.main(Bootstr ap.java:454)
    Caused by: java.lang.ExceptionInInitializerError
    at java.lang.J9VMInternals.initialize(J9VMInternals.j ava:257)
    at javax.crypto.KeyAgreement.getInstance(Unknown Source)
    at com.ibm.jsse2.L.h(L.java:53)
    at com.ibm.jsse2.L.a(L.java:206)
    at com.ibm.jsse2.l$c.a(l$c.java:6)
    at com.ibm.jsse2.l.a(l.java:90)
    at com.ibm.jsse2.m.a(m.java:2)
    at com.ibm.jsse2.m.g(m.java:123)
    at com.ibm.jsse2.SSLServerSocketFactoryImpl.getSuppor tedCipherSuites(SSLServerSocketFactoryImpl.java:11 )
    at org.apache.tomcat.util.net.jsse.JSSESocketFactory. <clinit>(JSSESocketFactory.java:114)
    at java.lang.J9VMInternals.initializeImpl(Native Method)
    at java.lang.J9VMInternals.initialize(J9VMInternals.j ava:235)
    at org.apache.tomcat.util.net.jsse.JSSEImplementation .getServerSocketFactory(JSSEImplementation.java:47 )
    at org.apache.tomcat.util.net.JIoEndpoint.bind(JIoEnd point.java:388)
    at org.apache.tomcat.util.net.AbstractEndpoint.init(A bstractEndpoint.java:646)
    at org.apache.coyote.AbstractProtocol.init(AbstractPr otocol.java:434)
    at org.apache.coyote.http11.AbstractHttp11JsseProtoco l.init(AbstractHttp11JsseProtocol.java:119)
    at org.apache.catalina.connector.Connector.initIntern al(Connector.java:978)
    at org.apache.catalina.util.LifecycleBase.init(Lifecy cleBase.java:102)
    ... 12 more
    Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
    at javax.crypto.b.<clinit>(Unknown Source)
    at java.lang.J9VMInternals.initializeImpl(Native Method)
    at java.lang.J9VMInternals.initialize(J9VMInternals.j ava:235)
    ... 30 more
    Caused by: java.lang.SecurityException: Cannot locate policy or framework files!
    at javax.crypto.b.c(Unknown Source)
    at javax.crypto.b.access$600(Unknown Source)
    at javax.crypto.b$0.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Access Controller.java:341)
    ... 33 more
    Java: 1.7 from IBM ink. JCE
    Keystore worked in 3.4 before.
    Has anybody an idea how I could solve this problem?
    Thanks,
    Michael

    Hello Willem,
    appserver.log:
    015-04-23 14:25:03,680 ERROR [localhost-startStop-1] [org.springframework.web.context.ContextLoader] - Context initialization failed
    org.springframework.beans.factory.BeanCreationExce ption: Error creating bean with name 'sPropsUtil' defined in ServletContext resource [/WEB-INF/context/applicationContext.xml]: Cannot create inner bean 'org.kablink.teaming.util.encrypt.EncryptedClassPa thConfigFiles#862127bd' of type [org.kablink.teaming.util.encrypt.EncryptedClassPat hConfigFiles] while setting bean property 'config'; nested exception is org.springframework.beans.factory.BeanCreationExce ption: Error creating bean with name 'org.kablink.teaming.util.encrypt.EncryptedClassPa thConfigFiles#862127bd' defined in ServletContext resource [/WEB-INF/context/applicationContext.xml]: Invocation of init method failed; nested exception is org.jasypt.exceptions.EncryptionInitializationExce ption: java.lang.NoClassDefFoundError: javax.crypto.b (initialization failure)
    at org.springframework.beans.factory.support.BeanDefi nitionValueResolver.resolveInnerBean(BeanDefinitio nValueResolver.java:287)
    at org.springframework.beans.factory.support.BeanDefi nitionValueResolver.resolveValueIfNecessary(BeanDe finitionValueResolver.java:122)
    at org.springframework.beans.factory.support.Abstract AutowireCapableBeanFactory.applyPropertyValues(Abs tractAutowireCapableBeanFactory.java:1417)
    at org.springframework.beans.factory.support.Abstract AutowireCapableBeanFactory.populateBean(AbstractAu towireCapableBeanFactory.java:1158)
    at org.springframework.beans.factory.support.Abstract AutowireCapableBeanFactory.doCreateBean(AbstractAu towireCapableBeanFactory.java:519)
    at org.springframework.beans.factory.support.Abstract AutowireCapableBeanFactory.createBean(AbstractAuto wireCapableBeanFactory.java:458)
    at org.springframework.beans.factory.support.Abstract BeanFactory$1.getObject(AbstractBeanFactory.java:2 96)
    at org.springframework.beans.factory.support.DefaultS ingletonBeanRegistry.getSingleton(DefaultSingleton BeanRegistry.java:223)
    at org.springframework.beans.factory.support.Abstract BeanFactory.doGetBean(AbstractBeanFactory.java:293 )
    at org.springframework.beans.factory.support.Abstract BeanFactory.getBean(AbstractBeanFactory.java:194)
    at org.springframework.beans.factory.support.Abstract BeanFactory.doGetBean(AbstractBeanFactory.java:286 )
    at org.springframework.beans.factory.support.Abstract BeanFactory.getBean(AbstractBeanFactory.java:194)
    at org.springframework.beans.factory.support.DefaultL istableBeanFactory.preInstantiateSingletons(Defaul tListableBeanFactory.java:615)
    at org.springframework.context.support.AbstractApplic ationContext.finishBeanFactoryInitialization(Abstr actApplicationContext.java:932)
    at org.springframework.context.support.AbstractApplic ationContext.refresh(AbstractApplicationContext.ja va:479)
    at org.springframework.web.context.ContextLoader.conf igureAndRefreshWebApplicationContext(ContextLoader .java:410)
    at org.springframework.web.context.ContextLoader.init WebApplicationContext(ContextLoader.java:306)
    at org.springframework.web.context.ContextLoaderListe ner.contextInitialized(ContextLoaderListener.java: 112)
    at org.kablink.teaming.spring.web.context.ContextLoad erListener.contextInitialized(ContextLoaderListene r.java:55)
    at org.apache.catalina.core.StandardContext.listenerS tart(StandardContext.java:4992)
    at org.apache.catalina.core.StandardContext.startInte rnal(StandardContext.java:5490)
    at org.apache.catalina.util.LifecycleBase.start(Lifec ycleBase.java:150)
    at org.apache.catalina.core.ContainerBase.addChildInt ernal(ContainerBase.java:901)
    at org.apache.catalina.core.ContainerBase.addChild(Co ntainerBase.java:877)
    at org.apache.catalina.core.StandardHost.addChild(Sta ndardHost.java:649)
    at org.apache.catalina.startup.HostConfig.deployDescr iptor(HostConfig.java:672)
    at org.apache.catalina.startup.HostConfig$DeployDescr iptor.run(HostConfig.java:1862)
    at java.util.concurrent.Executors$RunnableAdapter.cal l(Executors.java:483)
    at java.util.concurrent.FutureTask.run(FutureTask.jav a:274)
    at java.util.concurrent.ThreadPoolExecutor.runWorker( ThreadPoolExecutor.java:1157)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:627)
    at java.lang.Thread.run(Thread.java:801)
    Caused by: org.springframework.beans.factory.BeanCreationExce ption: Error creating bean with name 'org.kablink.teaming.util.encrypt.EncryptedClassPa thConfigFiles#862127bd' defined in ServletContext resource [/WEB-INF/context/applicationContext.xml]: Invocation of init method failed; nested exception is org.jasypt.exceptions.EncryptionInitializationExce ption: java.lang.NoClassDefFoundError: javax.crypto.b (initialization failure)
    at org.springframework.beans.factory.support.Abstract AutowireCapableBeanFactory.initializeBean(Abstract AutowireCapableBeanFactory.java:1512)
    at org.springframework.beans.factory.support.Abstract AutowireCapableBeanFactory.doCreateBean(AbstractAu towireCapableBeanFactory.java:521)
    at org.springframework.beans.factory.support.Abstract AutowireCapableBeanFactory.createBean(AbstractAuto wireCapableBeanFactory.java:458)
    at org.springframework.beans.factory.support.BeanDefi nitionValueResolver.resolveInnerBean(BeanDefinitio nValueResolver.java:276)
    ... 31 more
    Caused by: org.jasypt.exceptions.EncryptionInitializationExce ption: java.lang.NoClassDefFoundError: javax.crypto.b (initialization failure)
    at org.jasypt.encryption.pbe.StandardPBEByteEncryptor .initialize(StandardPBEByteEncryptor.java:638)
    at org.jasypt.encryption.pbe.StandardPBEStringEncrypt or.initialize(StandardPBEStringEncryptor.java:532)
    at org.jasypt.encryption.pbe.StandardPBEStringEncrypt or.encrypt(StandardPBEStringEncryptor.java:585)
    at org.kablink.util.encrypt.ExtendedPBEStringEncrypto r.encrypt(ExtendedPBEStringEncryptor.java:105)
    at org.kablink.teaming.util.encrypt.EncryptedClassPat hConfigFiles.afterPropertiesSet(EncryptedClassPath ConfigFiles.java:169)
    at org.springframework.beans.factory.support.Abstract AutowireCapableBeanFactory.invokeInitMethods(Abstr actAutowireCapableBeanFactory.java:1571)
    at org.springframework.beans.factory.support.Abstract AutowireCapableBeanFactory.initializeBean(Abstract AutowireCapableBeanFactory.java:1509)
    ... 34 more
    Caused by: java.lang.NoClassDefFoundError: javax.crypto.b (initialization failure)
    at java.lang.J9VMInternals.initialize(J9VMInternals.j ava:175)
    at javax.crypto.SecretKeyFactory.getInstance(Unknown Source)
    at org.jasypt.encryption.pbe.StandardPBEByteEncryptor .initialize(StandardPBEByteEncryptor.java:597)
    ... 40 more
    Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
    at javax.crypto.b.<clinit>(Unknown Source)
    at java.lang.J9VMInternals.initializeImpl(Native Method)
    at java.lang.J9VMInternals.initialize(J9VMInternals.j ava:235)
    at javax.crypto.KeyAgreement.getInstance(Unknown Source)
    at com.ibm.jsse2.L.h(L.java:53)
    at com.ibm.jsse2.L.a(L.java:206)
    at com.ibm.jsse2.l$c.a(l$c.java:6)
    at com.ibm.jsse2.l.a(l.java:90)
    at com.ibm.jsse2.m.a(m.java:2)
    at com.ibm.jsse2.m.g(m.java:123)
    at com.ibm.jsse2.SSLServerSocketFactoryImpl.getSuppor tedCipherSuites(SSLServerSocketFactoryImpl.java:11 )
    at org.apache.tomcat.util.net.jsse.JSSESocketFactory. <clinit>(JSSESocketFactory.java:114)
    at java.lang.J9VMInternals.initializeImpl(Native Method)
    at java.lang.J9VMInternals.initialize(J9VMInternals.j ava:235)
    at org.apache.tomcat.util.net.jsse.JSSEImplementation .getServerSocketFactory(JSSEImplementation.java:47 )
    at org.apache.tomcat.util.net.JIoEndpoint.bind(JIoEnd point.java:388)
    at org.apache.tomcat.util.net.AbstractEndpoint.init(A bstractEndpoint.java:646)
    at org.apache.coyote.AbstractProtocol.init(AbstractPr otocol.java:434)
    at org.apache.coyote.http11.AbstractHttp11JsseProtoco l.init(AbstractHttp11JsseProtocol.java:119)
    at org.apache.catalina.connector.Connector.initIntern al(Connector.java:978)
    at org.apache.catalina.util.LifecycleBase.init(Lifecy cleBase.java:102)
    at org.apache.catalina.core.StandardService.initInter nal(StandardService.java:559)
    at org.apache.catalina.util.LifecycleBase.init(Lifecy cleBase.java:102)
    at org.apache.catalina.core.StandardServer.initIntern al(StandardServer.java:821)
    at org.apache.catalina.util.LifecycleBase.init(Lifecy cleBase.java:102)
    at org.apache.catalina.startup.Catalina.load(Catalina .java:638)
    at org.apache.catalina.startup.Catalina.load(Catalina .java:663)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:95)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:56)
    at java.lang.reflect.Method.invoke(Method.java:620)
    at org.apache.catalina.startup.Bootstrap.load(Bootstr ap.java:280)
    at org.apache.catalina.startup.Bootstrap.main(Bootstr ap.java:454)
    Caused by: java.lang.SecurityException: Cannot locate policy or framework files!
    at javax.crypto.b.c(Unknown Source)
    at javax.crypto.b.access$600(Unknown Source)
    at javax.crypto.b$0.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Access Controller.java:341)
    ... 33 more
    2015-04-23 14:25:03,690 ERROR [localhost-startStop-1] [org.kablink.teaming.web.servlet.listener.ContextLi stenerPostSpring] - Error during startup
    java.lang.NullPointerException
    at org.kablink.teaming.util.SpringContextUtil.getBean (SpringContextUtil.java:117)
    at org.kablink.teaming.web.servlet.listener.ContextLi stenerPostSpring.getZoneModule(ContextListenerPost Spring.java:145)
    at org.kablink.teaming.web.servlet.listener.ContextLi stenerPostSpring.initZones(ContextListenerPostSpri ng.java:137)
    at org.kablink.teaming.web.servlet.listener.ContextLi stenerPostSpring.contextInitialized(ContextListene rPostSpring.java:62)
    at org.apache.catalina.core.StandardContext.listenerS tart(StandardContext.java:4992)
    at org.apache.catalina.core.StandardContext.startInte rnal(StandardContext.java:5490)
    at org.apache.catalina.util.LifecycleBase.start(Lifec ycleBase.java:150)
    at org.apache.catalina.core.ContainerBase.addChildInt ernal(ContainerBase.java:901)
    at org.apache.catalina.core.ContainerBase.addChild(Co ntainerBase.java:877)
    at org.apache.catalina.core.StandardHost.addChild(Sta ndardHost.java:649)
    at org.apache.catalina.startup.HostConfig.deployDescr iptor(HostConfig.java:672)
    at org.apache.catalina.startup.HostConfig$DeployDescr iptor.run(HostConfig.java:1862)
    at java.util.concurrent.Executors$RunnableAdapter.cal l(Executors.java:483)
    at java.util.concurrent.FutureTask.run(FutureTask.jav a:274)
    at java.util.concurrent.ThreadPoolExecutor.runWorker( ThreadPoolExecutor.java:1157)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:627)
    at java.lang.Thread.run(Thread.java:801)
    Michael

  • Excel wont start after upgrading to Office 2007

    just installed office 2007 now i get this error anytiem i launch BPC for Excel - SYSTEM ERROR &H8000405 -- i click OK and it says out of memory. Anyone encounter this before?
    Edited by: sapbpc70 on Oct 27, 2009 8:27 PM

    After the upgrade of Excel to 2007 did you reinstall the SAP BPC client?
    If not I suggest to do it because actually the SAP BPC is an add ins into excel.
    So in this case after the upgrade is possible that some register dll of SAP BPC to be into a bad status regarding registration.
    Also make sure you have installed into application server  Ofiice 2007 data connectivoty cpomponents.
    http://www.microsoft.com/downloads/details.aspx?FamilyID=7554F536-8C28-4598-9B72-EF94E038C891&displaylang=en
    Regards
    Sorin Radulescu

  • Wont start after upgrade

    Upgraded 1st gen ipad to iOS 4.3.2, then attemped to restore to factory. No issues previously but system was running slow.
    When connected to computer (PC running win7) itunes says that there may be an malfunction and to take it to an Apple store.

    just looked at "there is a problem with your device" thread, that seems to be my problem also so i will be following the updates on there

  • ITunes wont start After upgrading to 6.0

    I just updated to 6.0 and now when i clicked on the itunes icon it comes up with a send error report box. I tried downgrading to 5.01 and the same probume happens. i re installed 6.0 7 times and the same probume happens. So i currently have 6.0 installed. Again iTunes dosent even open up. Any ideas on getting it to work anyone?
    Thanks in advanced
    -Kyle
    EDIT:my PC crashed during instlliation if this could effect anything.

    hi y'all!
    first try a careful QT 7.0.3 reinstall. see:
    b noir, "QuickTime Installation FAILED!! "Error Code: -1"" #1, 09:31am Oct 22, 2005 CDT
    but if no joy with that, try the following more rigorous technique:
    b noir, "itunes won't open, tried all the suggestions here" #13, 10:08pm Nov 5, 2005 CDT
    keep us posted.
    love, b

  • My LaCie external hard drive connected to Time Machine for data backup drops it's connection and a error message displays tell me that I did not properly disconnect the device.  This started after upgrading to OSX10.6.7.

    My La Cie external hard drive drops it's connection after mounting on my iMac computer.  This problem seems to have started after upgrading to OSX10.6.7.  When I turn on my computer and than turn on the external hard drive the hard drive mounts to my disk top without any problem, but when I bring up Mail or Safari the hard drive drops its connection.  Is there a fix for this problem?  Hope someone can help.

    The connection to 10.6.7 may just be a coincidence.  I had a similar problem with a disk and was about to throw it out but decided to try a different USB cable.  That fixed the problem and the drive is still in use.
    Try a new cable if you have not already done so.
    Dave

  • IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?

    Had to upgrade according to screen.  iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
    I have restarted the computer. Brand new iMac intel. v 10.9.4

    You need to upgrade iPhoto for Mavericks. Download the upgrade using App Store.

  • Firefox 8 starts after upgrade but none of the windows are visible and it crashes on quit

    Firefox 8 starts after upgrade but none of the windows are visible and it crashes on quit

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    * https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes
    If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). You can find the IDs of the submitted crash reports on the about:crashes page. You can open the about:crashes page via the location bar, like you open a website.
    See:
    * http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)
    * https://support.mozilla.com/kb/Mozilla+Crash+Reporter
    * https://developer.mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

  • Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit)

    I can't reinstall Linksys Easy Link Advisor for WRT310N Wireless Router after upgrading to Windows 7 (64bit).  When I went to Linksys site for solution for new drivers, it asked me for Hardware Version Number.  This model doesn't show one.  Any thoughts?
    Thanks!

    Sabertooth is right. If you are able to go online from your Router then you don't need to install LELA software on your Computer.

  • Intel imac wont start after changing permission

    intel imac wont start after i changed my hard drive permission to let me read and write, then i clicked apply to all enclosed files.i turned it off no problem. then it never started up again in os x. the grey screen with apple logo appears,then after a minute it restarts, and will keep doing that if i let it. i can start up in windows xp, but i dont know how to do anything in windows xp that will affect os x. i can use the hard drive in target mode, but i cant figure out how that can help me. i use a macbook to view target disk. ive spent hours looking through help and support. finally i do not have the os install disks. PLEASE HELP!

    My apologies for the inept instructions.
    Restart normally. Open Terminal in the Utilities folder. Paste the commands in the Terminal application to avoid typos:
    sudo su
    Press RETURN. Enter your admin password when prompted.  It will not be echoed to the screen. Press RETURN again. Now paste each of the following at the prompt and press RETURN after each.
    chown root:admin /Applications
    chmod 0775 /Applications
    chown root:admin /Library
    chmod 1775 /Library
    chown root:admin /System
    chmod 0775 /System
    chown root:admin /Users
    chmod 0775 /Users
    chmod -R -N /Applications
    chown -R :admin /Applications/*
    Again, my apologies.

  • Portege Z930-118 wont start after BIOS update

    my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
    Any help please

    Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
    In such case you need professional help by authorized Toshiba service provider.
    On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
    Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

Maybe you are looking for