I-tunes gets hanged when connecting i-pad to 64 Bits Windows 7

Hi,
I have both new I-Pad and I-Phone, but none of these appears in my i-tunes. In fact i-tunes get hanged and i can't perform any action. This issue i only face with 64 Bits Windows 7.
I request help in this regard.

1. plug in IPAD
2. go to start
3. search bar type in: devmgmt.msc
4. open: portable devices
5. right click: apple Ipad, hit unistall
6. then hit reinstall
you should see in bottom tool bar your device being reinstalled.
open itunes.
If that doesn't work. Make sure you go in iTunes > Edit > Preferences > Devices and make sure to check: Prevent iPads, iPods, and iPhones from syncing automatically.
Then try to connect again

Similar Messages

CMS gets hang when configure TACACS

Hi
I have stack of 2950 switches. I have configure tacacs for login security purpose. but i am facing problem when i open CMS web interface. I am succussfully get authenticated. but its get hang when Discovering network information dialog box comes. If you close that session and reopen again then CMS working fine. Problem is that when I configure Network Access restriction group device for specific user. Then it halt at Discovering Network information. I am using Cisco ACS 3.0. Following my switch config.
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 1 default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated.
The only problem is CMS application getting hang with tacacs configuration . My IOS ver is 12.1(14)EA1A. Please help its very urgent.

I could not find any bugs related to the issue you are describing. There was one problem where the username/password prompt was appearing again and again which had to do with misconfigurations. Do let me know if you find a solution.

I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

Not all car systems are compatible with the iPod touch. Does the documentation/website for the car system say it is compatible with an iPod with iOS 5?

Can't get notifications when connected to Wi-Fi

My husband and I upgraded to the Galaxy S5 on Nov. 27th and both of our phones are having problems getting notifications when connected to WiFi. We can't get texts, calls, Facebook won't load, etc... We went to two different Verizon store and called tech support and no one has been able to give us an answer to fix this. On Sunday a Verizon store switched our phones for new ones and the something is still happening. We can use our old phones and the Wi-Fi works fine and we get all the notifications we missed.

Krissypaps wrote:
I was wondering if the library's router somehow gives preference to Windows computers over OS X and iOS devices and blocks Mac outgoing traffic when a certain number of Windows computers are online. Is that possible? It seems to happen only when there are a lot of people using their PCs.
It's possible I believe to identify a vendor by Mac address but I suspect that they'd never have gone ths far. I mean to what end?
Once on with your Mac can you even get software update to work?
At this point I would whilst there, create a new location in Network Pane of System Preferences and see if anything changes.

31.3.0 hangs when connecting to my IMAPS server (problem with intermediate certificates or SSL in general?).

After update to 31.3.0 Thunderbird hangs when connecting to IMAPS server aie.de (intermediate certificates in chain). No error message is given, Thunderbird just hangs with out updating the subject lines of the inbox.

It is a configuration problem of the courier imap ssl daemon, resolution is shown [http://xf.wiki.mithi.com/index.php/Error_observed_in_/var/log/messages_log,_imapd:_couriertls:_accept:_error:1408F10B:SSL_routines:SSL3_GET_RECORD:wrong_version_number#Resolution here]

ITunes 11.1 hangs when connecting to iCloud. How can I download 11.0.5?

Arrrrgh! iTunes 11.1 hangs on my system Windows 7 x64 when trying to connect to iCloud. It runs fine if I start it in safe mode (I have no third party plug-ins installed).
How do I download iTunes 11.0.5???? I've been searching on the Internt for the last 1/2 hour and it looks like Apple prevents users from downloading 11.0 once 11.1 (piece of crap) is out. WHY?????????

Hi,
I've been able to resolve the problem of iTunes crashing by emptying the SycServices folder - by following the steps described at the foot of this comment. I've also been able to sync my iPhone contacts with my Address Book ...but I cannot sync my Address Book with Outlook 2011 ... and thus my iPhone linking to Outlook 2011.
I'm aware that 'Sync Services' were depreciated in 10.8 and was hoping that this would be restored in full in v: 10.9.3. I understand that MicroSoft needs Sync Services to be reintroduced into the OS to enable the sync to work again for linking up with Outlook 2011 - which appear to be blank in my Sync Services preferences window as follows ....
I would be mighty grateful for any ideas/solutions on how to resolve this problem. Synching Outlook 2011 with my iPhone was so easy in the past!
Simon
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Application Support/SyncServices
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. Log out or restart the computer and empty the Trash. Test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Re: iTunes ver 11.2.1 hangs when connecting to iPhone

How do I get iTunes to connect to the itunes store in Windows 8.1?

How do I get iTunes to connect to the iTunes Store in Windows 8.1?

Hello, russ222.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles that I would recommend going through when experiencing issues connecting to the iTunes Store.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
iTunes: Advanced iTunes Store troubleshooting
https://support.apple.com/kb/TS3297
Cheers,
Jason H.

Adobe Connect gets hanged when enabling/disabling audio

Hi everyone!
My name is Dani and I'm from Spain.
We've just started using Adobe Connect but we are facing an unknown issue. (Art least, it's unknown for me )
I start a meeting as a host, then 2 or 3 people connect to it as guests, and then, everytime I enable or disable my own audio (through the direct icon) the entire platform gets hanged for 2 or 3 seconds. Very annoying!
We are using the adobe connect add-in in a computer with that configuration:
- Dell Optiplex 760
- Windows 7 x64
- 8 GB RAM
- Microsoft LifeCam HD
- ATI radeon graphic card (256MB)
- A DSL dedicated simetric line
Your help would be appreciated!!
Thanks in advance!!

Hi everyone!
My name is Dani and I'm from Spain.
We've just started using Adobe Connect but we are facing an unknown issue. (Art least, it's unknown for me )
I start a meeting as a host, then 2 or 3 people connect to it as guests, and then, everytime I enable or disable my own audio (through the direct icon) the entire platform gets hanged for 2 or 3 seconds. Very annoying!
We are using the adobe connect add-in in a computer with that configuration:
- Dell Optiplex 760
- Windows 7 x64
- 8 GB RAM
- Microsoft LifeCam HD
- ATI radeon graphic card (256MB)
- A DSL dedicated simetric line
Your help would be appreciated!!
Thanks in advance!!

Integration Directory is getting hanged when trying to do some changes

Hello All,
Ours is PRD XI 3.0 env...and when we try to do any changes(editing , activating , rejecting the changes) it gets hangs up with out throwing any error.
At the same time other java tools(IR,RWB,SLD) are properly accessible .
Some points to be taken into notice:
1>Even we tried to do a CACHE refresh SXI_CACHE , which is success with out any problems.
2>After entering into ID , when trying to do "clear SLD cache " also it gets hangup.
Can any one help us to fix this issue.
Best Regards
Rakesh

try the following;
1. close IR/ID.
2. open java web start
3. Preferences -> advanced -> clear folder
then try to open IR and ID.
this should do the trick
else;
XI start page -> Administration -> Java Web Start Administration -> Re-initialization

Sqlplus hanging when connecting by specifying user/pwd

Hi All,
Oracle 11G R2 on WIndows 2008 R2
I have cloned a server, serverA, and created a new server, lets say serverB. Two things i changed for this serverB:
1) edited tnsnames entry so that the alias TST now points to this new serverB hostname (previously it was pointing to serverA)
2) deleted and recreated the listener
Now when i try to connect to my instance using sqlplus and the username/pwd, it hangs here:
D:\ORACLE\DATABASE\ORA11G\database>sqlplus sys/blahblhablhar@tst as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Tue May 7 15:18:36 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.If i try to connect using
D:\ORACLE\DATABASE\ORA11G\database>sqlplus / as sysdba - IT WORKS.
I tried to recreate my pwd file using orapwd and no luck.
Any ideas as to why i cannot connect using the first method? Also, when i try to connect to this instance using SQL developer from my laptop, it also hangs when i do the 'Test' button..??
Thanks in advance.
Edited by: MSandico on 7-May-2013 12:43 PM
Edited by: MSandico on 7-May-2013 12:47 PM

Here it is:
D:\ORACLE\DATABASE\ORA11G\database>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.3.0 - Production on 08-MAY-2013 13:32
:59
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SERVERA.corp.XXX.com)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.3.0 - Produ
ction
Start Date                07-MAY-2013 10:57:31
Uptime                    1 days 2 hr. 35 min. 28 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   D:\Oracle\Database\ora11g\network\admin\listener.ora
Listener Log File         D:\ORACLE\DATABASE\diag\tnslsnr\IDCORATST01\listener\a
lert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SERVERA.corp.XXX.com)(PO
RT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 4 handler(s) for this service...
Service "MMSPRD7XDB" has 1 instance(s).
Instance "mmsprd7", status READY, has 1 handler(s) for this service...
Service "mmsprd7" has 1 instance(s).
Instance "mmsprd7", status READY, has 1 handler(s) for this service...
The command completed successfully
D:\ORACLE\DATABASE\ORA11G\database>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.3.0 - Production on 08-MAY-2013 13:33
:22
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=SERVERA.corp.XXX.com)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 4 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
      "ORACLE SERVER" established:0 refused:0 current:0 max:25 state:ready
         CLRExtProc
         (ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\NTN_498_D98D5B78_8ADC.ORA))
      "ORACLE SERVER" established:0 refused:0 current:0 max:25 state:ready
         CLRExtProc
         (ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\NTN_498_D98D5B78_4773.ORA))
Service "MMSPRD7XDB" has 1 instance(s).
Instance "mmsprd7", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: SERVERA, pid: 2136>
         (ADDRESS=(PROTOCOL=tcp)(HOST=SERVERA.corp.XXX.com)(PORT=521
94))
Service "mmsprd7" has 1 instance(s).
Instance "mmsprd7", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:7 refused:0 state:ready
         LOCAL SERVER
The command completed successfully
D:\ORACLE\DATABASE\ORA11G\database>Anything strike y'all yet?

Report6i is getting hanged when i am using truncate command in srw.do_sql

Hi All,
I am using Reports 6.0.8.18.0 and oracle 9.2.0.1 on Windows XP with SP1.
I am having a report in which i have used "truncate table <tablename>" command using SRW.do_sql command. some times report is getting hanged and some times it is giving an error as given below
18:26:52 ERR REP-1425: 'afterpform': Error running DO_SQL package - 'Error parsing the SQL statement.
ORA-04021: timeout occurred while waiting to lock object <object name >
When i checked with the Oracle 8.1.7 database it is working fine.
is there any patches are requried at database side ?
Can any body help me in this.
Regards,
Gouri

First: you should get a new keyboard. Seems your shift-key is stuck.
Second: A header of a post is a header and not for a summary of your question
Third: This is the forum for the tool SQL Developer. Please mark this question as answered and post again in Forms
Forth: When you expect an answer, the least would be to include the errormessage and your forms version.
Regards
Marcus

Get error when connecting SQL 2012 Management studio to SQL Server 2012 database

I got this error message when I tried to connect to SQL Server 2012 using Management studio 2012.
Service 'Microsoft.SqlServer.Management.IRegistrationService' not found (Microsoft.SqlServer.Management.SDK.SqlStudio)

Did this get this resolved?
My SSMS 2012 was running without issue for several months until I installed VS2012. After the VS2012 I started getting "Service 'Microsoft.SqlServer.Management.IRegistrationService' not found" when connecting to database in SSMS 2012. I uninstalled VS2012
and SSMS 2012 started working again. Installed VS2012 and SSMS 2012 is broken again.
I tried the above suggestions without success. Here are the error details. Any help is greatly appreciated.
===================================
Service 'Microsoft.SqlServer.Management.IRegistrationService' not found (Microsoft.SqlServer.Management.SDK.SqlStudio)
Program Location:
   at Microsoft.SqlServer.Management.ServiceProvider.GetService[T](IServiceProvider serviceProvider, Boolean throwIfNotFound)
   at Microsoft.SqlServer.Management.SqlStudio.Explorer.NavigationService.Initialize()
   at Microsoft.SqlServer.Management.SqlStudio.Explorer.NavigationService.GetView(String urnPath)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.<GetColumnsFromNavigationService>d__11.MoveNext()
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.AddFields(List`1 list, IEnumerable`1 fields, IDictionary`2 allValidFields, AddFieldsFlags flags)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.GetParentFields(INodeInformation source, Dictionary`2& allValidColumns)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItemWithQuery(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, String urnQuery, Boolean registerBuilder, Boolean registerBuiltItems)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.BuildDynamicItem(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItemBuilder.Build(IList`1 nodes, INodeInformation source, INavigableItem sourceItem, IFilterProvider filter)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.NavigableItem.RequestChildren(IGetChildrenRequest request)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ExplorerHierarchyNode.BuildChildren(WaitHandle quitEvent)

OCIStmtExecute hangs when connection is lost

Hi,
If the connection to the Oracle server for some reason is lost, the call to OCIStmtExecute could hang for several minutes. When OCIStmtExecute finally returns a new call to OCIStmtExecute does not hang but of course it returns with error.
How can I prevent OCIStmtExecute from hanging several minutes first time when connection is lost?
I'm using nonblocking mode, but it obviously doesnt prevent OCIStmtExecute from hanging the first time after connection loss.
Can anybody help me?
Thanks in advance!
Br,
Ole Hansen

Although Bug 18336207 is still in status "80 - Development to QA/Fix Delivered Internal" - it seems that it was fixed in the final Release 3 (v4.121.2.20141216)
(at least I can't reproduce it anymore).
Thanks

Planning getting hanged when i change a member hierarchy

Hi,
When i try to change the hierarchy of a member by cutting and pasting it or through outlineload.cmd, planning is getting hanged. I get java heap space error. We have set the intial and max heap size in the registry as
1. Initial heap size = -Xms1024m
2. Max heap size = -Xmx1024m
Even the planning service is not responding. And planning web is not even opening now.
There is another entry in the registry named JVMOption10 = -Xss256k.
What has to be done?
Regards,
Ragav.
Edited by: ragavhere on Mar 25, 2011 6:52 PM
Edited by: ragavhere on Mar 25, 2011 7:01 PM

Hi John,
There was workflow enabled for a particular scenario. I've cleared it. Now i am able to delete. Thanks a lot.
But otherwise when workflow is enabled and if i have to change the hierarchy, how is this scenario managed? Is this the only way?
Regards,
Ragav.

ActiveMQ-CPP client hangs when connect ActiveMQ-CPP client & OpenMQ broker

I am trying to connect an ActiveMQ-CPP client with an Oracle OpenMQ broker via STOMP. Both manufacturers claim this will work, and I have been able to get an ActiveMQ-CPP client to connect to an ActiveMQ broker via STOMP, an OpenMQ client with an OpenMQ broker via STOMP, and an OpenMQ client with an ActiveMQ broker via STOMP without problems, but the only one missing is what I need- ActiveMQ-CPP client to connect with OpenMQ broker.
I am using Fedora Linux and am using the provided "example" script for ActiveMQ-CPP, changing the brokerURL to be "tcp://localhost:61613?wireFormat=stomp" instead, where the OpenMQ STOMP bridge is located at localhost:61613.
On the OpenMQ end, I receive the request to connect by the client and I start a connection:
INFO: Create JMS connection for user admin with client id ID:csa-nexus-57767-1281630228652-1:0
Aug 12, 2010 8:23:48 AM
INFO: Started JMS connection 8950669406784000768[ID:csa-nexus-57767-1281630228652-1:0] for user admin
This is where the ActiveMQ-CPP client hangs at "connection->start", or if this is removed, "connection->createSession".
Any help would be appreciated. Thanks!

I need to use ActiveMQ-CPP because I need a C++ messaging client which supports failover, which OpenMQ's C client does not. I thought it was unlikely that it wouldn't be able to connect as well. I can't find a good way to debug the ActiveMQ-CPP client enough to know whether the problem is on the ActiveMQ-CPP client's end or the OpenMQ broker's end.
Here is the source code for installing ActiveMQ-CPP, that is how you install it: http://activemq.apache.org/cms/activemq-cpp-322-release.html.
The example comes bundled with ActiveMQ-CPP installation, but I'll show you parts of the main.cpp file that does all of the work:
class HelloWorldConsumer : public ExceptionListener,
public MessageListener,
public Runnable {
private:
this->brokerURI = brokerURI;
virtual ~HelloWorldConsumer(){
cleanup();
void close() {
this->cleanup();
void waitUntilReady() {
latch.await();
virtual void run() {
try {
auto_ptr<ConnectionFactory> connectionFactory( ConnectionFactory::createCMSConnectionFactory( brokerURI ) );
// Create a Connection
connection = connectionFactory->createConnection("admin", "admin");
connection->start();
connection->setExceptionListener(this);
// Create a Session
if( this->sessionTransacted == true ) {
session = connection->createSession( Session::SESSION_TRANSACTED );
} else {
session = connection->createSession( Session::AUTO_ACKNOWLEDGE );
// Create the destination (Topic or Queue)
if( useTopic ) {
destination = session->createTopic( "TEST.FOO" );
} else {
destination = session->createQueue( "TEST.FOO" );
// Create a MessageConsumer from the Session to the Topic or Queue
consumer = session->createConsumer( destination );
consumer->setMessageListener( this );
std::cout.flush();
std::cerr.flush();
// Indicate we are ready for messages.
latch.countDown();
// Wait while asynchronous messages come in.
doneLatch.await( waitMillis );
} catch( CMSException& e ) {
// Indicate we are ready for messages.
latch.countDown();
e.printStackTrace();
// Called from the consumer since this class is a registered MessageListener.
virtual void onMessage( const Message* message ){
static int count = 0;
try
count++;
const TextMessage* textMessage =
dynamic_cast< const TextMessage* >( message );
string text = "";
if( textMessage != NULL ) {
text = textMessage->getText();
} else {
text = "NOT A TEXTMESSAGE!";
printf( "Message #%d Received: %s\n", count, text.c_str() );
} catch (CMSException& e) {
e.printStackTrace();
// Commit all messages.
if( this->sessionTransacted ) {
session->commit();
// No matter what, tag the count down latch until done.
doneLatch.countDown();
// If something bad happens you see it here as this class is also been
// registered as an ExceptionListener with the connection.
virtual void onException( const CMSException& ex AMQCPP_UNUSED) {
printf("CMS Exception occurred. Shutting down client.\n");
ex.printStackTrace();
exit(1);
int main(int argc AMQCPP_UNUSED, char* argv[] AMQCPP_UNUSED) {
activemq::library::ActiveMQCPP::initializeLibrary();
std::cout << "=====================================================\n";
std::cout << "Starting the example:" << std::endl;
std::cout << "-----------------------------------------------------\n";
std::string brokerURI =
"tcp://localhost:61613"
"?wireFormat=stomp"
// "&soConnectTimeout=5"
// "&connection.sendTimeout=5"
// "&connection.useAsyncSend=true"
// "&transport.useInactivityMonitor=false"
// "&connection.alwaysSyncSend=true"
// "&connection.useAsyncSend=true"
// "&transport.commandTracingEnabled=true"
// "&transport.tcpTracingEnabled=true"
// "&wireFormat.tightEncodingEnabled=true"
//============================================================
// set to true to use topics instead of queues
// Note in the code above that this causes createTopic or
// createQueue to be used in both consumer an producer.
//============================================================
bool useTopics = true;
bool sessionTransacted = false;
int numMessages = 2000;
long long startTime = System::currentTimeMillis();
HelloWorldProducer producer( brokerURI, numMessages, useTopics );
HelloWorldConsumer consumer( brokerURI, numMessages, useTopics, sessionTransacted );
// Start the consumer thread.
Thread consumerThread( &consumer );
consumerThread.start();
// Wait for the consumer to indicate that its ready to go.
consumer.waitUntilReady();
// Start the producer thread.
Thread producerThread( &producer );
producerThread.start();
// Wait for the threads to complete.
producerThread.join();
consumerThread.join();
long long endTime = System::currentTimeMillis();
double totalTime = (double)(endTime - startTime) / 1000.0;
consumer.close();
producer.close();
std::cout << "Time to completion = " << totalTime << " seconds." << std::endl;
std::cout << "-----------------------------------------------------\n";
std::cout << "Finished with the example." << std::endl;
std::cout << "=====================================================\n";
activemq::library::ActiveMQCPP::shutdownLibrary();
// END SNIPPET: demo The places where the code will hang upon connection are "connection->start() and connection->createSession()". Again, this happens with any ActiveMQ client, no matter the language, and via Stomp, both should be supported. But using an OpenMQ client with ActiveMQ broker works perfectly. And using this code with its own ActiveMQ broker still via Stomp works perfectly as well.
Thanks!

I-tunes gets hanged when connecting i-pad to 64 Bits Windows 7

Similar Messages

Maybe you are looking for