I tunes & I Photo not recognising my I Phone. Help!

Hi just updated my mac and I tunes to version 11.0.4. and now it doesn't recognise my i phone (which is up to date re: software). Tried all the tips on Apples website but just can't get it recognised in either iPhoto or i tunes. Help please!

Phone is a 4s running on 6.1.3.

Similar Messages

  • I-tunes occasionally does not recognise my i-phone and i-pad

    ...anyone with an idea how to solve this on board...?
    Thnx.

    Are you apple devices still on the same network as the printer?
    To check this, go into settings and select WiFi. Make sure that it is turned on and you have a check mark next to the same wireless network that the printer is connected to.
    After that, go into "General" and make sure that bluetooth is turned off.
    If you are still having issues after completing these steps, please let me know and I'll give you some more troubleshooting steps that may help us get this issue resolved. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • My ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

    my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

    tmplHi pranoop,
    If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Pc suite dos not recognise the connect phone.

    I am receiving the error message "pc suite dos not recognise the connect phone.
    the connection between the pc and the phone failed, error code 0x80043605. Switch off your phone, switch it on, and try again."
    Any idea?
    Operative System: Windows XP SP 2
    PC Suite version: 6.80.20
    Mobile: 7250i
    Connection method: cable DKU5
    BR,
    Leandra

    Hi, did running PC suite cleaner 3.3 work for you? I am having exactly the same problem and tried this. PC suite cleaner didn't seem to run properly. I chose the "other" problem type and it said that it could not create a list of directories, please reboot and try again. I did this but no good. I then reloaded PC suite and got the same results.
    My phone is 6230i
    PC suite version is 8.80.21
    Thanks!

  • Hi,i was about to update my software version of i phone 4,but suddnley power went off.now my phone is not recognised ,and my phone doesn't work,how to reinstall operating system,please help me.....

    hi,i was about to update my software version of i phone 4,but suddnley power went off.now my phone is not recognised ,and my phone doesn't work,how to reinstall operating system,please help me.....

    Put the device in DFU mode: http://www.iclarified.com/entry/index.php?enid=1034

  • I tunes update does not recognise my nano

    I have just updated i tunes on my PC running windows 8 and now my nano is not recognised as a device any idea?

    Hello, chascaley. 
    Thank you for visiting Apple Support Communities. 
    I would try updating the Apple Mobile Device Driver.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver in the article below. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • 1000D and lighroom 4. RAW photos not recognised..?

    i have a canon 1000D and lighroom 4.  lightroom will not recognise the RAW files. any idea why?  thanks

    So LR says it is not supported, rather than “cannot be read” which is something entirely different.
    Can you upload one of these incompatible raws to www.dropbox.com <http://www.dropbox.com>  and post the public download link to it, here?  t is possible they are corrupted or taken in some different raw format like video stills or something else that Adobe hasn’t programmed for.

  • Iphone Windows 7 Photos not recognised

    I apologise as there are many questions reference the problems with iphones windows 7 & 64bit PC's but I cannot find a solution on here.
    I have a new PC at work, 64bit & Windows 7. I do not have itunes on this PC, I just use it for charging & downloading photos.
    On plugging the phone in, it see's it, but if I click on the import videos and pictures it says there is nothing on the phone... and there are. Honest!
    I've also looked under explorer, which shows me the DCIM folder but that also say's there is nothing in it.
    Any ideas? As it's confused the living biscuit out of me!
    Thanks
    Heidi

    Actually, this just appeared in the window next to my last post - and although its ref an XP machine, seems its the 64bit is the problem, not the windows 7
    Correct Answer by Dave Sawyer  on Oct 9, 2008 2:08 PM
    As you probably know by now, iTunes and the iPhone are not supported on the 64-bit version of Windows XP. Though I can't say for sure, my guess is that they never will be since even Microsoft seems to be running away from the 64-bit XP as fast as they can in favor of Vista.
    Well in that case - is there a way using itunes you can remove photos from your iphone? If there is, I might just have to 'annoyingly' beg work to allow me to install it. Meh.
    Thats irritating. I hate begging.
    Heidi

  • Replacement ipod touch not recognised by computer/itunes - help?

    Apple store replace ipod touch 4thgen.  New ipod not recognised by computer/itunes.  Can't figure out the problem - help please.

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Ipod not recognised by anything! Help!!!

    I am running Windows XP and have a iPod click wheel.
    iTunes (6.0.5.20) will now not recognise it; and neither will the updater. I have reset my ipod, but still no joy. When I try the updater, a pop up box called Autoplay comes up and it looks like it is searching for something.
    I then read some posts and put the ipod into Disk mode - this then made it recognisable by the updater and I tried to restore. However, after a while, it stopped and I got a message "Cannot mount iPod".
    Since then, the updater will not recognise the ipod, even in disk mode.
    I think the error started when i got a message saying that one of my files (can't remember which) was corrupt (at this point, itunes was recognising the ipod); i then took the cable out and put it back in again, and it looked like all the songs on my ipod were being updated (as if just being out put on). Perhaps foolishly, I took the cable out again, and although it looks like I have 12,000 tracks on the ipod, many of them just skip over as if they are not there....
    please help!
    thanks

    As you now realise unplugging the cable is not a good idea. What you should have done (in the first place) is to have either run the updater to restore (which wipes all the files on the iPod and should fix the filesystem) or run chkdsk (which may have prevented the problem getting worse). When a bit of a filesystem is damaged it tends to spread, if you fix it then it generally goes no further. Try putting the iPod into disk mode and use chkdsk to fix it. You need to use the /R (or at least the /F) parameter to fix it (e.g. Chkdsk I: /R, I: is the drive letter windows has allocated to your iPod).

  • I tunes match will not work on my computer. help

    I tunes match does not work on my compaq presario. help. I have uninstalled an reinstalled itunes.

    A great way to flag such an issue is to include a Screenshot of the point at which you find iTunes Match does not work - simply find PrintScrn key when the error is on the screen, hit the key, paste the result into simple accessory such as Paint, save as JPEG and using the camera icon to import the image alongside your supporting text.
    Certainly Windows 7 both 32 bit and 64bit work very well with the latest version of iTunes and iTune Match.

  • Photos not saving on my phone after i updated my phone

    So i did the update on my phone a couple weeks ago, so i can now go to the camera even while my phone is locked. right? well so ive been doing that but now all of a sudden when i went to do that it didnt save the photos i had taken, and now i cant even go look at my photos, send a photo through a text or anything with photos because those couple pictures didnt save correctly. i can still take pictures but there not showing up as saved and when i go to photos and go to the albums and try to open the album with all my folders it wont open and it will just close the photo app. i dont know what to do, i love my iphone but im not great with technology. please help me, the camera is my life on my phone, i have many pictures on there and many of them are backed up but some recent ones havent been. if you need more info i will try to give it to you. Thanks.

    All apps are DRM protected & tied to the account used to originally obtain them. They cannot be updated using another iTunes account/Apple ID, nor can they be transferred to another iTunes account/Apple ID. You'll have to contact iTunes support, explain the situation & request they add your apps to the download queue of your new Apple ID:
    http://www.apple.com/support/itunes/contact/

  • HT4623 4s hung showing apple icon continuously blinking every 10 seconds. itunes not recognising the device please help?

    my iphone suddenly stopped working. only apple icon is showing blinking once for every 10 to  15 seconds. Itunes is not recognising my device on my lap top. I can  not do anything. please help me.

    How did you get the VMWare sync to work? I hate Apple at this point.

  • Ipod photo not recognised

    Today I updated to itunes 10.2.2 Now my Ipod photo is no longer recognised and will not even reset. It was working fine under 10.2.1 after an initial struggle.
    I can nget it into disk mode but it sill doesn't appear when plugged in. Any ideas?

    When you have the iPod in Disk Mode and connected to your PC, does it appear in as a mounted drive in My Computer (or just Computer)?
    If so, try reformatting it using the tools provided by Windows.
    Have you considering re-installing iTunes as well?
    You may want to take a look at this article for more troubleshooting assistance.
    http://support.apple.com/kb/ts1496
    B-rock

  • I tunes is not recognising the renamed phone?

    My wife is now using our daughters old Iphone 4. We've got a new sim card and created a new Apple account etc. When we connect the phone to the lap top to sync (my wife is signed into I tunes etc) the store says she has 16 updates. But these are for our daughter account. If we try to do the updates the are wanting our daughters ID password. How do we overcome this. Everything on the phone is signed in as my wife. Ideas?

    You can either Delete those Apps Off the Phone and Not Resync them back...
    Or Erase the phone and Start over...
    Go to Settings > General > Reset > Erase all content and settings
    Then Connect to iTunes and just Sync what your Wife requires.

Maybe you are looking for

  • MacBook Air, no access to an external drive or any other computer with one. Just Internet.

    I bought a cs 6 design standard but i want to install it on my MacBook Air with no cd drive and I have no access to a computer with a working one so I can't transfer it to a flash drive. Can I just download it from here and if yes, where exactly? Tha

  • Paging issues using a dynamic view object...

    I am working on an application that uses JAG to generate JSP pages, i had the requirement to use dynamic view objects where the view object query is generated at runtime. The rest of the application is more or less the same... I used the defult funct

  • Cisco Aiornet 1042 with MAC address

    Hi, I have a Cisco Aiornet, model  AIR-AP1042N-E-K9. I need to configure the AP to only certain MAC access.  I'm doing the configuration through the console.  The wireless network is not showing up in devices, anyone know why? version 15.2 no service

  • Font looks much differnt on PC

    I recently made a website on iWeb and used the courier font size 72. Everywhere this font was used in this size looks completely distorted and pixelated on any PC that opens my site. Does anyone know why? The site can be found at http://web.mac.com/a

  • Non-Present Hidden Devices are Shown Automatically. No Need for DEVMGR_SHOW_NONPRESENT_DEVICES Anymore

    Hello, I noticed that non-present devices that were previously used on the computer to which Device Manager snap-in is connected to are currently shown automatically should you choose Shown hidden devices item in the View menu without you have to set