I-tunes installed but cannot open in other users using Windows XP
I-tunes installed and works with no problem in original user AND worked with a subsequent second user with a second I-Pod. After downloading version 7.5, I-tunes will not open in any other user in Windows XP including the 2nd user. Opening I-Tunes from the Start menu produced an installation / configuration attempt when trying to open in other users with nothing opening at the end. Same with Quicktime. Using the desktop shortcut produces the same installation/ configuration attempt resulting in a "problem with shortcut / fatal error during installation" message. All users are Administrators.
I tried un-installing / re-installing, installing Quicktime alone, setting up a new user (same thing happens), tried MSCONFIG for any conflicts.
Any ideas to open I-tunes in other user desktops?
I have the same problem
Similar Messages
-
I HAVE ADOBE READER INSTALLED BUT CANNOT OPEN PDF FILES ON THE INTERNET
i HAVE ADOBE READER INSTALLED BUT CANNOT OPEN PDF FILES ON THE INTERNET
This could be the problem/solution: http://support.microsoft.com/kb/2716529
-
I upgraded from mountain lion to the OS X Mavericks and my EndNote X5 can not open.I re-installed it but cannot open. I keep on getting the message "Unable to load EndNote X5: Applications/EndNote X5/EndNote X5.app/Contents/Encore.bundle" can anyone help?
Please take each of the following steps that you haven't already tried. Test after each one. Back up all data before making any changes.
1. Make sure that the right volume is selected in the Startup Disk preference pane.
2. Disconnect all wired peripherals except those needed to start up. If there's no change, reconnect them
3. Reset the System Management Controller.
4. Reset the PRAM.
5. Start up in safe mode, then restart as usual. If you can't start in safe mode—for instance, if FileVault is active—then triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with an item named "folders" selected. Move the selected item to the Trash. You'll be prompted for your administrator password. Restart and empty the Trash. -
I installed Lightroom CC successfully but cannot open the program. What can I do?
Dear colleagues,
I installed Lightroom CC successfully but cannot open the program. What can I do?
Thanks for you help.Puttetorpa
The situation with Premiere Elements 8.0/8.0.1 and version earlier than it (in particular 3.0/3.0.2) is disturbing with regard to MPEG2 Activation.
Adobe document says that it no longer supports MPEG2 Activation for versions 8.0/8.0.1 and earlier and points the users of this group of products to a version later than 8.0/8.0.1, the current latest version 12.
But, I am not sure of the real answer. The doubts are cast by the findings of some who have claimed to have solved the problem using a uninstall/ccleaner/reinstall scheme when they have been met by the MPEG2 Activation issue.
But, I would ask....Do you have the latest version of QuickTime installed on your Windows 7 64 bit computer? And, are you working with version 3.0 as the 3.0.2 Update?
Is it still possible to run your Premiere Elements 3.0/3.0.2 on the prior computer on which it was installed?
Also, does your Windows 7 64 bit come with Windows XP Mode
Install and use Windows XP Mode in Windows 7
which is essentially a virtual Windows XP Professional SP3 32 bit.
As last resort, and highly experimental, but would you have time to experiment by replacing your latest version of QuickTime with the QuickTime Alternative 1.8.1 and then determining what happens with your Premiere Elements 3.0/3.0.2 Windows 7 64 bit situation? Do not bother with the MPEG Streamclip program download, just the QuickTime Alternative 1.8.1.
http://www.squared5.com/
Please review, consider, and do what you feel comfortable with. We will be watching for your progress.
Thank you.
ATR -
I am connected to Orange fr, I can download emails etc but cannot open any webpages. Ipod Touch 5th vers, latest IOS installed, any advice would be most welcome. This is the first time I have had this problem as my Ipod works immediately everywhere else. My laptop does not show this problem using the same orange provider, so its obviously some setting in the Ipod :-(
Try this:
1. Double-click the Home button to reveal Task Bar at bottom
2. Hold the Safari app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Re-launch the app and test
Note: If necessary close all apps in the Task Bar -
I have uninstalled itunes and all things "apple" re-installed itunes but cannot open it. It appears in my harddrive but not in list of programs HELP!!!!!
It appears in my harddrive
Could you describe what you're seeing in your hard drive in some more detail, please? -
I downloaded ADE today on my Mac but I cannot open it. It is showing up as a disk and is only giving me the option to install but not open. Help.
After installation, you'll be able to open ADE.
-
Pages 5.2 opens all kinds of other document formats (even old .doc Versions), but cannot open Pages 08 etc. of its own kind?
I have to use NeoOffice to open my documents of many years of work.
Is there an option to organize a corporate complain to Apple to be heard?We have been doing nothing but for 10 months.
Here is the response: -
I have installed CC but cannot open it
I have instaaled CC but cannot open it on my desktop
App doesn't open | Progress wheel spins continually
https://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html -
When attempting to download the new version of itunes I was able to complete the download without a problem but cannot open the icon when everthing is done. I unistalled everything and reinstalled, I followed all the trouble-shooting guides, I attempted to download an older version and nothing is working. Prior to attempting to download this "new and improved version of itunes" everything was working fine. Unfortunately I had to update when I got a new iPhone and wanted to sync it to my old library and needed an updated version of itunes.
Restart Computer.
Refer steps here to delete SC file(s):
Win7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your QuickTime. START > CONTROL PANEL
WinXP - Add n Remove Programs
Win7/Vista - Programs n Features
highlight QUICKTIME and click CHANGE then REPAIR -
For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone
mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR -
Installed, but cannot get Firefox to run. When I try, it crashes. Report contents give adapterdevice id - 0x0a3c and adaptervendorid - 0x10de
Have tried to uninstall and reinstall.Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you! -
Pogo website loads and displays but cannot open games; works fine on Internet Explorer.
For about two weeks now, have been unable to open games on the Pogo website; the main page opens but cannot open any games.
All works just fine on IE9.
No work on 8.0.1; installed 9.0.1---still no work as described above.Surely, am not the only one who cannot load games on Pogo.com. . . .the website loads in but I get a "connection reset" type message each and every time I attempt to load any game. W7Pro 64-bit Dell Studio XPS i7core. Was properly working in F8 and then just stopped doing so; upped to F9 but still have same problem.
Ideas, anyone?
BTW, Pogo works just fine in IE9. -
i used reliance dongle to browse internet on mountain lion, at first it gave me problems but after updating the reliance software it worked fine. Now i have upgraded my osx to mavericks. The reliance software gets installed but dosent open giving some error, Now i cannot use the internet !!! and itz the latest version of reliance software,,, plz help me !!!
At last i did some experiments and it solved my problem... heres the solution :
1. Install the reliance drivers and software from their website.
2. As the reliance software is not supported my mavericks it wont open, but dont worry.
3. Now after installation go to system preferences->network->and select "ZTE Wireless Terminal".
4. Configuration: Default
Telephone number: #777
Account name and password should be the owners number.
5.Finish ! press apply and click Connect...
Enjoy browsing !!! -
iPhoto will not load the iPhoto library. When I select "show all windows" the library does appear but cannot open it. I am on version 8.1.2 and using Maverick.
I was able to get it fixed. I had received some responses and they had me
recreate the library I believe. It's been a while so I cant remember
exactly what I did. I have since upgraded to the latest i photo version and
have had no problems with it.
Brian
On Friday, November 7, 2014, Apple Support Communities Updates <
Maybe you are looking for
-
Camera Raw editing is not enabled.Camera Raw editing requires that a qualifying product has been lau
Camera Raw editing is not enabled. Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature.This appears when the open in camera raw disc is clicked in bridge. any solutions??
-
ADF FACES : Document structure guidelines ?
Does a paper exists that presents the adf faces globally document structure and the possible and recommended adf faces components hierarchy. I have seen some time ago something like that for UIX (forget where) ... is it the same one ? does this paper
-
Data missing in PDF (external send - Medium 5)
We have an output condition record (ZSOR) that is configured for Medium types 1(print) & 5(email PDF). When a sales order is saved ZSOR medium type 5 is automatically determine and the user who created the order (VBAK-ERNAM) receives an email with th
-
The Java File ... Could Not Be Launched
I have X.jar files that whenever I launch java opens (as I can see in the dock) and then immidately quits. A few seconds later I get a popup: "The Java JAR file "Whatever.jar" could not be launched. Check the console for possible error messages." Typ
-
Adobe premier pro app just disappered
Adobe premier pro cc app just disappered