I-tunes is disabled
I am trying to buy songs on both my PC and I-phone and it says I-tunes is disabled. I enabled I-tunes store with no success.
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work.
Similar Messages
-
How do you re-able your disabled i tunes account?
i am furious because i just got a new i pod and i cannot download any of my music because my i tunes is disabled how do you re-able it?!
I don't know what pandora is, but to reset the iPhone you hold the sleep and home button down together until the apple pops up, then let go, then it's reset.
-
HT1212 how to unlocked my i pad through i tunes
how to unlocked my dissabled i pad through i tunes?
Disabled because you forgot the passcode?
You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
iOS: Wrong passcode results in red disabled screen
This will tell you how to restore
iTunes: Backing up, updating or restoring iOS software
If you cannot restore that way, you may have to use recovery mode
iPad: Unable to update or restore -
Cannot download music from I-Tunes Store (Error -50)
New to using I-Tunes Store.
When I try to purchase songs and subsequently when they try to down load, unknown error -50 turns up.
Have download new version of I-Tunes and disabled Norton Online with no success.
I am currently with Netzero and have asked if there is anything on their end causing the problem.
Any advice would be appreciated.
HP pavillion A250e Windows XPNetzero may use an internet accelerator, if so, accelerators are know to cause problems with a music store connection. If there is an accelerator, try disabling, then try to connect to the store. The following link will also give you some other information about troubleshooting a -50.
http://docs.info.apple.com/article.html?artnum=93447 -
i am making the abs mplayer. it compiled ok, but i got the following error when try to run.
MPlayer SVN-r29411-4.4.1 (C) 2000-2009 MPlayer Team
137 audio & 299 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing /home/chancho/Azureus Downloads/Monsters VS Aliens 3d trailer.1080p x264/Monsters VS Aliens 3d trailer.1080p x264.mkv.
[mkv] Track ID 1: video (V_MPEG4/ISO/AVC), -vid 0
[mkv] Track ID 2: audio (A_AC3), -aid 0, -alang und
[mkv] Will play video track 1.
Matroska file format detected.
VIDEO: [avc1] 1920x1080 24bpp 23.976 fps 0.0 kbps ( 0.0 kbyte/s)
==========================================================================
Forced video codec: ffh264vdpau
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
[VD_FFMPEG] XVMC-accelerated MPEG-2.
Selected video codec: [ffh264vdpau] vfm: ffmpeg (FFmpeg H.264 (VDPAU))
==========================================================================
==========================================================================
Opening audio decoder: [liba52] AC3 decoding with liba52
Using SSE optimized IMDCT transform
MPlayer interrupted by signal 11 in module: init_audio_codec
- MPlayer crashed by bad usage of CPU/FPU/RAM.
Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
- MPlayer crashed. This shouldn't happen.
It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
gcc version. If you think it's MPlayer's fault, please read
DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
won't help unless you provide this information when reporting a possible bug.
it also happen to the aur version.After building mplayer myself, I can confirm the problem. To start with, the liba52 patch that was necessary to compile mplayer with gcc 4.4.0, is not necessary when you compile with gcc 4.4.1. The bug fix was incorporated in the latest gcc release. Unfortunately MPlayer crashes again on ac3 files. Until a fix has come out, the only thing to get it back to work is to compile mplayer with a previous gcc (4.3 is a good example). You'll need to install a previous gcc besides the one you currently have installed. The best way to do so is to base yourself on the gcc-snapshot pkgbuild from aur. Here's the one I used myself:
# Contributor: Allan McRae <[email protected]>
pkgname=gcc43
_ver=4.3
pkgver=4.3.3
pkgrel=1
pkgdesc="The GNU Compiler Collection developmental snapshot"
arch=('i686' 'x86_64')
license=('GPL3' 'LGPL')
url="http://gcc.gnu.org"
depends=('glibc' 'binutils' 'gmp' 'mpfr' 'ppl' 'cloog-ppl')
makedepends=('flex' 'bison')
options=('!libtool')
source=(ftp://gcc.gnu.org/pub/gcc/releases/gcc-${pkgver}/gcc-{core,g++,fortran,objc,java}-${pkgver}.tar.bz2
gcc_pure64.patch
gcc-hash-style-both.patch
buildfix_new_bison.patch)
md5sums=('1739288c2c7b1472796b33d641dbdbbd'
'18428e313a9927d38b313e688c62219b'
'8771e6190dd4f3178b2a7978d2380a5d'
'125b75947c763ba59b7ea95d3739d431'
'068938366ee0be5b70112bdf485898b4'
'4030ee1c08dd1e843c0225b772360e76'
'bb420bc84b1104455b7230b1cd4b96c2'
'6895f128e905bfcb26e328899235e553')
build() {
cd ${srcdir}/gcc-${pkgver}
# Don't install libiberty
sed -i 's/install_to_$(INSTALL_DEST) //' libiberty/Makefile.in
if [ "${CARCH}" = "x86_64" ]; then
patch -Np1 -i ../gcc_pure64.patch || return 1
fi
# Don't run fixincludes
sed -i -e 's@\./fixinc\.sh@-c true@' gcc/Makefile.in
patch -Np0 -i ${srcdir}/gcc-hash-style-both.patch || return 1
patch -Np0 -i ${srcdir}/buildfix_new_bison.patch || return 1
mkdir build
cd build
../configure --prefix=/usr --enable-shared \
--enable-languages=c,c++ \
--enable-threads=posix --mandir=/usr/share/man --infodir=/usr/share/info \
--enable-__cxa_atexit --disable-multilib --libdir=/usr/lib \
--libexecdir=/usr/lib --enable-clocale=gnu --disable-libstdcxx-pch \
--with-tune=generic \
--disable-werror --enable-checking=release \
--program-suffix=-${_ver} --enable-version-specific-runtime-libs
make || return 1
make -j1 DESTDIR=${pkgdir} install || return 1
# Lazy way of dealing with conflicting man and info pages...
rm -rf ${pkgdir}/usr/share -
I know a lot of people are having problems with I-Tunes 7.6.
It opens but hangs after I attempt to access libraries.
Very angry.
Any info yet.
I can't seem to downgrade because I am getting message saying that library is set to new version of I-tunes.Try disabling a/v software and turning off the Firewall.
Disable antivirus software
Turn Windows Firewall on or off
Disconnect the iPhone from your PC. Launch iTunes. From the menu bar click Store / Authorize This Computer.
Connect the iPhone.
See if that makes a difference.
If not, you may need to restart the AMDS.
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
my i tunes account says that my apple id has been disabled whenever i try to make a purchase how do i fix this problem?
Depending on why it's been disabled, you might be able to re-enable it via this page : http://appleid.apple.com
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ -
Why is my Apple ID still disabled when supposedly it was fixed by Apple ID support over the phone this am over 12 hours ago and they said it ( my Apple ID and password) would be disabled no longer then 8 hours and I still am unable to buy anything in the I tunes store or pay for any apps or games.
We are fellow users here on these forums. Have you tried logging out of your account on your iPad by tapping on your id in Settings > iTunes & App Store and then logged in and seeing if it then works ?
-
how can i fix my phone its a 4s.. disabled.. when i connect to i tunes to restore it wont allow me as it is not a trusted computer. obviously i cant access the phone to allow trust, it picks it up as my own phone but wont restore... please help!!!
Hello feeling dumb
You will need to put your iPhone into recovery mode by following the steps highlighted below.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Regards,
-Norm G. -
How to fix ipod when it tells u ipod disabled connect to i tunes
how can i fix my ipod touch when a friend put the wrong password in now it tells me ipod disabled connect to i tunes an it still doesnt work
Place the iPod in Recovery mode and then connect to your computer and restore via iTunes on your computer.
-
Streaming music from i-tunes to my PS3 w/out disabling firewall
I wanted to know if any of you have been able to stream media from your i-tunes library to an external server without disabling your firewall? Right now the only way I can do it is if I turn the firewall completely off. If I enable only the port directed at i-tunes it doesn't work. Any suggestions?
PS: I use EyeConnect to stream the media but is there something that works better or something that is free perhaps?VOB files are mpeg-2. I'll give them a try.
iPhoto worked fine, like iTunes it read all the albums + slideshows etc.
PowerMac here - may be different with intel.
I'm going to wait a few weeks before I tackle this again. I'd prefer to use EC so I can stream EyeTV without having to convert files.
Was just emailed this from Eyeconnect Support.
"Thank you for contacting Elgato Systems.
The new PlayStation 3 firmware does offer the opportunity for software like EyeConnect to send data to it.
However, EyeConnect is not yet optimized for the PS3. This would explain the problems a few users have seen.
So, we will test EyeConnect with the PS3, and adjust EyeConnect software as needed.
Hopefully we can have our tests done soon, but we have no specific data to share about when this additional functionality might be ready."
--------- -
i need help with my i pad which has become disabled. the screen is saying i have to connect with i tunes but that is not possible. i don't want to wipe everything out and lose my pictures. please tell me there is another way to open up my i pad without losing my pictures. thanks for any help!
Sorry, but you'll have to restore it. And if it's running iOS 7 with Find My iPad enabled, you'll have to force it into recovery mode in order to restore it, as explained here: http://support.apple.com/kb/ht1808.
If you have a backup to restore from, that will include your camera roll photos. -
can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to change the passwords, I haven't used the account since 2010?
Hi eddinchina,
You should have no need to use the Old Sync account.
As long as device or devices are Firefox 29 or later (They should all be Firefox 30 now) you should use the New Sync.
You may use the same email address with both accounts. -
I can't able to download my aps from I tunes, cause my apple ID is disabled, may I know how to re-activate my apple ID
Depending on why it's been disabled, you might be able to re-enable it via this page : http://appleid.apple.com
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
i am trying to download music from i tunes to my new ipod touch but i keep getting the message "apple id has been disabled." how long do i need to wait before it's "enabled" again? or what can i do to "enable" it again?
Have you tried the links on this page http://www.apple.com/support/appleid/ ?
Maybe you are looking for
-
How can I put a footer that links to the first page of a pdf from the other pages?
I am trying to create a pdf that has the option "Return to Table of Contents" at the bottom of each page from 2 to 23. I know how to add a footer, and I know how to add a link, but is there a way to put a link as a footer? I don't want to have to g
-
Struts and JSF Integration in OPDk-java based portlet
Hi, thanks in advance for your help. I'm developing a PDK java based portlet. For some reasons I cannot use the JSF bridge but I would like to integrate Struts and Jsf in my portlet, using Struts to manage actions and navigation and JSF (with ADF Fac
-
Does the iphone 4s have the split keyboard or can you only do that on the ipad
can you get the split keyboard on the iphone 4s or is that only on ipads?
-
Plugging in iPod dismounts USB drive-Finder copy
I have 3 USB and 8 FireWire drives in addition to 3 internal drive connected to my Mac Pro. I am running OS X 10.5.2 and when I plug in my iPod classic (160 GB), one of my USB drives dismounts. This happened when I was copying a large amount of data
-
Hi Gurus, another needed help.....I'm still in the initial download phase and I'm trying to download MATERIALS from ECC to CRM. After several, now resolved, errors about Tax Groups (missing coutries, sequence and values), I'm facing to another blocki