I tunes is not installing... get a error message

My itunes is not re-installing keep getting an error message about the "C" library not working

I spent five hours yesterday messing with this issue. After uninstalling, trying to reinstall, restarting my computer, here is what finally worked for me. I uninstalled all of my apple products, including Quicktime and I-Cloud. At that point I kept trying to reinstall and couldn't get the software for ITunes to download. So I gave up and reinstalled Quicktime and I-Cloud off of the Internet. That part of the reinstall worked. I was about to give up for the night, but logged into my I-Tunes account and tried one more time to reinstall, and it worked! It seemed to be the combination of uninstalling everything, reinstalling the two software programs and then logging in before trying to reinstall I-Tunes.

Similar Messages

Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).

Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193). I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue. I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support. This also has not resolved the issue.
When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.” Verify you have sufficient privileges to start system services. I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2

Since I can not log in bug report page, not even getting an error message, I'll write all my issues with ios8 here...

Since I can not log in bug report page, not even getting an error message, I'll write all my issues with ios8 here... I have an iphone 4S and I did the last update. Now I am in trouble.
1. When I move the "sound on/off" button, I get it buzzing 10 times before the setting is changed and I can do anything else, just not reacting to the round button on screen touches.
2. Impossible to copy text from most websites into notes.
3. Impossible to delete an email account in settings.
4. Uses up the battery twice as fast as before. I have "update apps" setting turned off, just reading a couple of mails, making a couple of photos and open maps apps twice a day, and the battery is dead well before the evening.
5. Got extremely slow, and it was getting slower and slower with every system update.
I'm sure I forgot something... But well, that already a lot.

Well, actually number 3 in my list is not true any more, I just tried to delete my account 15 times, then I've written my post, then half an hour later my Settings finally updated my accounts list. Whohoo
I did not try restoring it yet, thank you for the link!

II have downloaded several Apps that state they work with iTouch but they will not install and give error message that I need updated software, while all my updates available are installed on both iTouch and my computer iTunesWhy will Mindtools app not

My iPod Touch will not function with certain updated apps ie MindTools, YP.com, Mint, Ymessenger etc and I get the error message that I need to install updated software to load these apps to my iPod Touch; however, I have double checked and all the software updates have been loaded in obht the iPod touch and my computer. There are no updates availabe; yet the error message on App is a software update is required for App. "was not installed because it requires a newer version of iPod software."
The iPod Touch is using 3.1.3 software and it tells me that is the current and updated software version.

You are correct in that your 1G iPod Touch has all the latest software updates. It can only be updated to version 3.1.
However that Apps you are trying to download and install likely require iOS version 4.0 or later, which is not compatible with your iPod Touch. So either you'll need to buy a newer iPod Touch or find other Apps that are suitable replacements if possible.
Sorry.
B-rock

ITunes will not start: Get same error message ever time...

I installed iTunes 6 and quicktime and now it will not start up at all. Tried uninstalling and reinstalling as many have. The only difference is I am actually getting an error message. I do not get an hour glass as many have. I have tried deleting the suggested file found at: C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info
This did not work either. I keep getting the following error window, and never see iTunes even try to launch: PLEASE HELP!!!!
"iTunes has encountered a problem and needs to close. We are sorry for the inconvienence. If you were in the middle of something, the information you were working on may be lost. For more information about this error click here"

hi Josh!
"iTunes has encountered a problem and needs to close. We are sorry for the inconvienence.
the first thing i check for with one of those is a broken quicktime. does your quicktime currently launch? if it doesn't, try these techniques:
b noir, "iTunes doesn't start... Quicktime not installed ERROR 2093" #5, 03:28pm Nov 8, 2005 CDT
keep us posted.
love, b

Aperture help not working - getting JavaScript error message

My Aperture 3 has been having a lot of strange issues lately, most, but not all of which have been cleared up by holding down command + option while starting up and going through all three of the choices there.
One problem that remains is the inability to open the Help files. I keep getting the following message:
“The Help Library requires JavaScript.
If JavaScript is not enabled, you will not
be able to view all the content.”
Help works in all other applications, like Pages and Final Cut Pro. I don’t get JavaScript error messages in any other applications.
I’ve already done an erase and restore from a Time Machine backup, and an archive and install. I reinstalled Aperture, although not by using the Terminal command suggested in the kbase article # HT3805.
If I go the Terminal command route, will I lose all my projects, albums, and editing? What about Mobile Me galleries?
I have a guest user on the computer, and when I log on to that user and open Aperture, the Help Library works fine. So, I know the problem is in my user account somewhere, but I don’t know how to address it. Any ideas?

Welcome to the forums.
The fact that you have access to java in another user suggests that it is a local setting or preference.
In the applications folder/utilities there is an application Java Preferences, try resetting this and seeing if it works.
If not, try deleting the java preferences file in your users folder
systemHD/Users/user/Library/Preferences/com.apple.java.JavaPreferences.plist
relaunch the app Java Preferences which creates a new preferences file for you, then try Aperture again.
Let us know how this goes.
Tony

After Upgrade to latest iTunes, it will not open.Uninstall and reinstall did not help Getting this error message '' Runtime Error R6034 '' An application has made an attempt to load the C runtime library incorrectly''. 3 windows PCs.1 vista, 2 windows7 7

I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned. But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, '' '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.'' That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
Jonas.
3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Ipod not recognized, getting odd error message

I've seen this posted a few times, but without any hints as to how to fix the problem.
I have a 4G 20GB iPod, just over a year old (meaning, no warranty), that has worked fine until this morning. I turned it on, and all of a sudden, it kept skipping through all of my songs, and wouldn't respond to the pause, play, etc. buttons.
I attached it to my computer via FireWire, and I keep getting this odd error message: "You have inserted a device that has no volumes that OSX can recognize" It asks me if I want to ignore, initialize, or eject the disc. I've been having it ignore it, or eject it (staying far away from initialization). After I ejected it, I noticed that all the songs on my iPod are now missing.
I reset the iPod, which didn't do much, and now I can't restore it, because neither the computer or iTunes recognizes my iPod. It shows up in Disk Utility, but I'm not entirely sure how to proceed.
What happened to my iPod? I can't seem to find anything in the Apple support pages that seems similar to my situation. Any suggestions on how to get the thing to work again?
Edit: I am using iTunes version 4.9; I have not updated to 5.0

This is the most frustrating tech trouble!
The same thing has happened to my iPod. It worked fine, then one day I plug it in and it says "Disc inserted is unreadable by this computer". As far as I remember, I didnt' update anything, make any changes, or adjust any settings to any of my hardware. SO WHAT HAPPENED?? And now I can't restore or doctor the iPod hardware bc my computer won't recognize it as actual hardware...
pleeeeease help, if anyone has a way to fix this.
The weirdest part, is that when I look at the information of the "unreadable hardware" it describes it with all the information, like how many gigs are available, how much space is used up, latest updates etc. So it can transfer information, but it pretends its unreadable? i dont understand.

Firefox will not open, getting an error message about max and min do not match....

error message detail:
XULRunner
Platform version'1.9.2' is not compatible with
min version>=1.9.2.10
max version<=1.9.2.10
this occurs after clicking the normal firefox open icon from my desktop

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.<br />
Don't remove personal data when uninstalling.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Will not install new update error message?

Runtime Error
Program:C:\Program Files (x86)itunes \itunes.exe
R6034
An application has made and attempt to load the C runtime library incorrectly.
Itunes was not installed correctly. Please reinstall itunes
Error 7 (windows error 1114)
Received this error. when loading new update. Tried to uninstall itunes to reinstall but the same error occurs. Anyone have any ideas??

See Troubleshooting issues with iTunes for Windows updates.
tt2

I just purchased an IPAD2 and am trying to install ITunes. Itunes will not install. My error message is 'Apple Mobile Device' failed to start. Verify you have privileges to start system services. This is an XP service Pack 3 and I am the only user.

I would like to be able to use my IPAD. Itunes will not install. It tells me it cannot start Apple Mobile Device Services I am using XP service Pack 3. I am the administrator. The message also says to verify that I have sufficient privileges to start system services.
Thank you,

http://tinyurl.com/3hs3g2u

Having trouble with Face Time app, get following error messages

Since having a new hard drive installed in computer my Face Time account no longer works. Everytime i try and sign into my Face Time account= get following error message
"the server encountered an error processing registration. Please try again later.
= when try and install the app from mac store error message says
"A newer version of this app is already installed on this computer
If you want to replace it with this version, move the existing app to the trash.
BUT WHEN TRY TO DELETE APP ON COMPUTUER (AS IT IS NOT WORKING)
Get following error message " Face Time.app" can't be modified or deleted because it is required by Mac OS X.
have MacBook Pro
mountain Lion
Software OS X 10.8.3
Hope you can assist, best wishes GG

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
Step 3
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 4
Back up all data, then take the steps suggested in this support article.
There are five steps in that article. Please take all of them. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 5
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 6
Reset the NVRAM.
Step 7
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 8
Boot in safe mode and log in. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
Step 9
According to one anecdotal report, Flash Player may interfere with iMessage, though I don't know how and can't confirm. To test this theory, select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane. If this action solves the problem, please post your results.
Step 10
Boot into Recovery and reinstall OS X.
Step 11
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

Getting the error message while logging through work place after upgrade

Hi,
C:\Documents and setting\YP80002\Local Settings\Temporary Internet files\Content.IE5\GTKFGH6L\tx[2].sap
Application not found
Getting the error message while logging through work place.
It is urgent
Thanks,
Sri.

After upgrading the Batch file it worked fine.
Thanks,
Sri.

I can't access my i tunes, getting message-System error-can't start because MSVCR80.dll is missing, also i tunes was not installed correctly-error 7(Windows error126)-What do i do to get into my itunes library?

Can someone please help me to get to my i Tunes library? I am getting the following message when trying to access i Tunes=i Tunes. exe-System error-can't start because MSVCR 80.dll is missing-Try reinstalling program. Also i Tunes was not installed correctly-Please reinstall i Tunes.-Error7(Windows error 126).

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I have removed and re installed I tunes and all related apple products. 5 times and still get message not installed correctly or error 7 or to install english version. I give up help

I have removed and re installed I tunes and all related apple products. 5 times and still get message not installed correctly or error 7 or to install english version. I give up help

Have you worked through the tt2 user tip:Troubleshooting issues with iTunes for Windows updates this is the best source on resolving iTunes for Windows issues.

I tunes is not installing... get a error message

Similar Messages

Maybe you are looking for