I tunes is not recognising my i pad have tried misconfig ?
I tunes does not now recognise my i pad, have tried misconfig still no joy.
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If you provide the exact wording ogf the error message a more specific answer is likely.
Similar Messages
-
My computer restarted while I was updating software from OS4.1 to OS 5. Now my Ipod touch is just frozen. All it shows is the usb connection to itune symbol. Itune does not recognise. I have done the reset but nothing happens after the apple symbol shows up and back to usb and itune symbol. Help please.
See if placing the Ipod in recovery mode will allow iTunes to see the iPod so yu can restore the iPOd.. For recovery mode:
iPhone and iPod touch: Unable to update or restore
Next try DFU Mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have recently purchased a used iPhone 4, when I pulg it into my pc a skull icon appears instead of the apple. The pc also does not recognise the iPhone. The phone was originally purchased in March of this year, so it is under 12 months old. Has anybody encountered this problem and or know how I can fix the phone? Thanks
You have apparently purchased a jailbroken phone. You can try to get it into recovery mode, then restore as new, but no guarantee it will work.
http://support.apple.com/kb/ht1808 -
My pc does not recognise my iPad in iTunes. The pc is clearly recognising a connection of some sorts because when I connect the iPad it makes n audible sound. Any suggestions? I have tried all the usual reboots and reinstalling of iTunes.
Universal Serial Bus controllers
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel(R) ICH9 Family USB Universal Host Controller - 2935
Intel(R) ICH9 Family USB Universal Host Controller - 2936
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel(R) ICH9 Family USB Universal Host Controller - 2938
Intel(R) ICH9 Family USB Universal Host Controller - 2939
Intel(R) ICH9 Family USB Universal Host Controller - 293A
Intel(R) ICH9 Family USB Universal Host Controller - 293C
USB Composite Device
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer. -
My ipod not recognisable by itunes i have tried everything suggested by app
ok, here is how it started. i wanted album art in my ipod, so i searched the web got all the album art i could and put in each album stored in my itunes. everything was going smoothly when it came to one particular album and from tat time i m having this problem. when i connect the ipod the "do not disconnect message" is displayed and it never goes away and itunes isnt opening either. when i open itunes the ipod is not displayed. and i have to disconnect the ipod with the "do no disconnect" still on. will ther be any problem pls help.....
my ipod is not displayed in itunes... so i have to shut down my comp everytime to disconnect my ipod. everytime i connect ipod to the comp, the do not disconnect message appears on the ipod, but my ipod is charging but it s not displayed in itunes. i m not able to manipulate my songs. i have been hearing the same set of songs for a lnog time..
-
I tried to download an upgrade that was recommended by APPLE, the upgrade stopped halfway through and the iPod Touch was turned off, now the iPod Touch has a BLANK WHITE SCREEN and is UNRESPONSIVE to the COMPUTER
I wonder if anyone can help
Thank you
BrizeyTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I-tunes does not recognise ipad to restore after failed update to ios 5
i-tunes does not recognise ipad to restore after failed update to ios 5. Connected i-pad to update to new ios 5. Back-upp went fine but update failed and now i-tunes does not recognise the devise and i-pad will not work so I have no known way to restore.
Copied from that article.....
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
Are you releasing the home button when you see the connect to iTunes screen? Does iTunes start on its own? If it doesn't - start iTunes yourself.
Also copied from the article.....
5. If necessary, open iTunes. You should see the following "recovery mode" alert: -
I-tunes does not recognise phone
restored i-phone 4s but i-tunes does not recognise phone
This Apple article might help ya out -> iOS: Device not recognized in iTunes for Windows
Is the Apple Mobile Device Service running?
You may want to try uninstalling the security software or following along with Apple's article. -
My i tunes will NOT recognize my I Pad 2 when I plug it in to sync. Any idea why?
My I tunes will NOT recognize my I pad 2 device when I plug it into my pc to sync. Any idea as to why this is happening? When I turn the I pad 2 on, this is the first thing it tells me to do. I am clueless.
thanksWow. You are confusing me. Your profile says that you are running Lion OS X 10.7.2 which is the latest Mac OS. Had I known that you were trying to use an OS that didn't meet the requirements .....
You may be able to still buy Leopard - but you can't download it for free. You may still be able to purchase Snow Leopard which would be the better choice - 10.6. You need to ugrade the mini in order to activate the iPad.
I am still mystified as to why the iPad will not work out of the box - unless you did not buy it from Apple. All of the iPads that Apple sells now run iOS 5 and you don't need a computer to activate them. -
my i phone 5 has frozen during the os ipgrade and will not reset and i tunes does not recognise the phone
What is showing on the iphone screen?
Try this:
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
Make sure itunes is updated to the lates version on the computer.
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/ -
I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???
You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
iPad: Unable to update or restore -
I am trying to personal hotspot but each time I go into it and tune it on the screen goes back to the Settings page and personal hotspot has disappeared and can not be found. I have tried restarting the phone and also a factory restore to no avail. HELP
I had a similar issue and it was password case sensitive issue
-
my phone will not pick up network, i have tried restoring on i-tunes and it comes up with error message -1
Here's what that error means:
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This comes from this article:
http://support.apple.com/kb/TS3694#error1 -
I have purchased a new iPod Nano and have tried repeatedly to set it up but iTunes will not recognise it. I have 5 other devices connected to my itunes account so is this the problem and what can I do?
There is no 5 device limit. There is a 5 computer limit.
Device not detected in iTunes -
As soon as i type a letter in fire fox it stops working, i get (FIRE FOX IS NOT RESPONDING, WINDOWS IS NOT INTERACTING WITH FIREFOX) I have tried all i can and now give up. Ive cleared all cookies and catch, etc i have gone in to help and tried out instructions for the not responding but no luck. I have windows 7 and have not had problems in the past with firefox. I have uninstalled and reinstalled still no luck.
go to '''TOOLS '''then '''OPTIONS''' then '''ADVANCED''' then '''NETWORK tab''' then '''SETTINGS tab''' and select the options '''NO PROXY''' click '''OK''' and '''OK '''again in the next screen. With that you have disabled the proxy settings.
''if you like to not disable the proxy settings choose'' : '''Auto-detect proxy settings for this network''' (it is in the same session)
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.
Maybe you are looking for
-
Hi, I just started development on SUP 2.1.2 and created an MBO for BAPI_FLIGHT_GETLIST successfully. I assigned an PersonalizationKey for Input parameter ARLINE and tested the MBO in Eclipse - it works like as expected. Then I followed the Sybase tut
-
Use old product number for new product.
Dear all, I have to manage the following case. From a defined date the engineering releases a new product that will substitute an old product. The marketing doesnu2019t want to change material number and would you like to use the old product number a
-
Calendar popup in WAD - Urgent
In web application designer - I need to incorporte date function which should have a calendar popup. I need to select date from the calendar. This is happening in bex - query level, but when use the same query in WAD , it is not showing the popup. G
-
Configuring a proxy server with username and passw...
Dear All, There is one thing which I have found in all the Nokia phones I have had until now which I find very disappointing: A proxy server can be set BUT a username and password for it cannot. In the case of trying to connect to the Internet outsid
-
How to read Crystal Reports Parameters
I am using vs 2010 ,Crystal Reports, VB.Net , ASP.Net 4.0 and Telerik control RADCOMBOBOX. I what to be able to read a reports parameter values and populate the RADCOMBOBOX with the values of the Crystal Report Parameters. How do I read; get access