I tunes ll.2.0.115 into windows 8.1

Unable to install Itunes in 8.1 64 bit. Error entry point ADiAdID. Acquire Match Slot if necessary. Could not be located in the dynamic link library C: \ Program Files (x86) itunes.dll.

Hi toosar1,
If you are having issues installing iTunes on your Windows machine, you may find the following articles helpful:
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Regards,
- Brenden

Similar Messages

HT2688 trying to go into windows movie maker to make a photo disc with songs but it will not let me use the songs i bought in i tunes.it says i need to install codec but it has not worked

i am trying to go into windows movie maker to make a photo disc with songs from my i tunes but it tells me i can not do it because codec is not installed.i have tried to get codec but does not seem to have worked.

Go into your system profiler and tell us your Machine Identifier that says:
iMac x,y (give us the x and y values)
That will tell us whether you are Mavericks compatible or not.
Also tell us how much RAM you have installed.

Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?

Hi all! I was updating the software on i pad to ios6, update was interrupted(apple update server is unavailable...). iTunes Diagnostics shows that "secure link to I tunes store failed". I use Windows 7 Home Premium 64 bit. Can anybody help please?
The following was done so far:
1. Windows Firewall - new rule created for itunes.
2. iTunes - latest version installed.
3. LAN setting : automatic detection of proxy is enabled;
4. iTunes diagnostics shows:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
TOSHIBA Satellite L655
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003FB880034B7720
Current user is not an administrator.
The current local date and time is 2013-04-23 11:01:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {1CB5BBC2-8124-4664-899A-CE0A4683E3B4}
Description:          Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 08:00:00 1970
Lease Expires:          Thu Jan 01 08:00:00 1970
DNS Servers:
Adapter Name:          {8140112A-43D0-41D6-8B36-BE146C811173}
Description:          Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20)
IP Address:          10.5.7.196
Subnet Mask:          255.255.0.0
Default Gateway:          10.5.0.1
DHCP Enabled:          Yes
DHCP Server:          172.18.255.2
Lease Obtained:          Tue Apr 23 10:14:40 2013
Lease Expires:          Tue Apr 23 22:14:40 2013
DNS Servers:          121.97.59.7
                    121.97.59.2
                    121.97.59.3
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2013-03-22 10:05:31.
@@@. iTunes IS ENABLED THROUGH THE FIREWALL , even though diagnostics says "NOT enabled"

hours after the first post i somehow got this to work. dont know how, but i do tried the dns clear cache, the clear host file, oh and i did the check automatically detech dns AND THEN se-check it again before i got this to work.

TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

Here's what I get:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:11:24:7d:e7:1e
media: autoselect (none) status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
ether 00:11:24:28:2e:71
media: autoselect status: active
supported media: autoselect
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
lladdr 00:11:24:ff:fe:7d:e7:1e
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>

Can't boot into Windows 8 Single Language 64 bit or access the BIOS screen with the F1 key

I have in my possession right now a Lenovo E49, Model name: 3464
I am unable to access the BIOS settings at POST by pressing the F1 key. Neither does it respond to the Enter key when it displays the message "To interrupt normal startup, Press Enter". I am also unable to boot into the installed OS Windows 8 Single Language 64 bit.
For your informtion, these are the events that led to this issue.
I accessed the BIOS settings at startup using the CHANGE PC SETTINGS option in the CHARMS menu in Windows 8 Single Languge 64 bit followed by GENERAL and ADVANCED STARTUP. Then I chose Restart Now. Windows restarted to produce the startup screen where I chose Troubleshoot, followed by Advanced Options and UEFI Firmware Settings, followed by Restart. This took me to the BIOS settings screen. Once there I changed the boot settings in BIOS so that SECURE BOOT was turnned OFF. It was in ON state prior to that. I also changed the BOOT MODE to LEGACY ONLY. I also changed the BOOT ORDER to boot from DVD drive first followed by the Hard Disk and USB Hard Disk. I saved the changes by pressing F10.
Now the computer is able to boot from the DVD Drive. I tested this by inserting a Windows 7 Repair DVD and also a Linux Live DVD. Mind you, I didn't mke any changes to the Hard Drive. I'm also able to boot from a USB Hard Disk. This too was tested by inserting a bootable USB HD that had both Windows 7 and Windows 8 OS installers. I used only the command prompt feature in the Repair option on the Windows 8 installer to ensure that I could access the partitions on the HD. I did not in any way install Windows 7 or 8 on the HD.
If there is no bootable DVD or USB HD inserted, the laptop is involved in a loop that restarts followed by a message that says the following:
"Intel Undi, PXE-2.1 (build 083)
Copyright (C) 1997-2000 Intel Corporation
This product is covered by one or more of the following patents:
US5, 307, 459, US5, 434, 872, US5, 732, 094, US6, 570, 884, US6, 115, 776 and US6, 327, 625
Realtek PCIe GBE Family Controller Series v2.41 (06/08/11)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM."
I am positive that the current state of the BIOS is such that it does not accept any input keys like F1 and F12 at POST so that the BIOS can only be accessed through Change PC Settings in Windows 8 as I had done prior to the occurence of the issue. Since I cannot boot up Windows 8 I cannot use this method to access the BIOS. And since it is not possible at this stage to access the BIOS settings through the F1 key, I believe Lenovo must have surely provided another alternative to enter the BIOS. Can you kindly tell me what other way is there to do this. In earlier days, one could reset the BIOS by shorting the BIOS through pins on the motherboard. Is that possible now? Or is there some Lenovo BIOS utilily that enables me to change the BIOS setting to boot with Legacy and UEFI? Or do I have to install Windows 8.1 64 bit in Legacy mode?

I'll see if another member of the team can jump in here and offer more help...
What I might imagine is that you can only access BIOS from a cold boot. Windows 8/8.1 have hybrid shutdown and don't completely shut down the machine normally, so even when it powers off, it isn't fully off and the next boot is not really a cold boot.
Please see this KB. I realize this assumes you can get into windows.
As you suggest, it also seems as though you have set legacy vs UEFI and that may be why your drive is not currently booting. Can you remove the battery on your system? If not, is there a reset hole on the bottom? Removing battery and AC and pressing and holding the power button several times, then re-attach AC and Battery and try to restart and press F1 to get into BIOS. (Not familiar with models that use enter for BIOS).
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can only boot into Windows 7. Can't even boot from Snow Leopard DVD.

I have no idea what prompted this. I don't recall installing any OS updates recently, other than some Windows Live apps in Windows 7.
I have an early 2009 Mac Mini with Snow Leopard, and have Windows 7 64-bit installed in a Boot Camp partition. When I installed Windows 7, I couldn't get the Boot Camp utility to install within Windows (I guess because it's 64-bit) so to switch back and forth between OSes, I just shut down the Mac and restart it with the Option key pressed, and select Mac OS X when I want to return to Mac. This has worked for about a month and a half now (ever since I got Windows 7). Suddenly I have problems.
I first had problems booting into Windows or Mac. I got to the grey screen with the Apple logo, with that spinning "progress" thing going for a while, then it would freeze up and get stuck on the grey screen with the Apple logo. I zapped the PRAM. No help. Then, after disconnecting all external drives (I have several) and extra USB devices, I was able to boot from the DVD install disk and reinstall Snow Leopard on my internal drive. Joy, or so I thought. Then I booted into Windows 7, and after some weirdness getting it to start, it did successfully start and ran just peachy.
Then I turned off the Mac and held down the option key (as usual) to return to Mac OS. But now all that happens is that I get a grey screen for a few seconds, then the Mac boots back into Windows 7, which seems to work fine. (I'm in Windows 7 right now.) I turned on one my external drives (Snow Leopard installed, connected via Firewire 800) in hopes that the Mac would boot into that, but same thing. Ignored and back to Windows 7.
Then I thought I'd boot from the install DVD again by putting it in the drive and holding down the C key as I restart, but the same thing--a grey screen for a few seconds, and then booting right into Windows 7. I can't seem to escape Windows 7! It's a bit disturbing when it won't even recognize the install DVD.
I tried to call Apple Care since I'm within my 90 day support window, but of course they are closed. I'm figuring that I'm going to have to take this into an Apple Store, but thought I'd see if anyone has any ideas. Any advice will be appreciated. Thanks.

According to Apple, Win 7 64bit is supported with Bootcamp 3.0. If bootcamp 3.0 is available; I could not find it anywhere on Apple's website. It appears the most recent version is 2.2. The only place I could find 3.0 is not on Apples website and it's a questionable source so I won't post it here.
It may just be a matter of time before Apple makes it available. I'm not suggesting you wait, however if the install disk can't be used, I'm not too sure where u could go from there. Calling Applecare might work.
If you do a simple google search using the terms 'download bootcamp drivers windows 7' u will see what I was referring too.
Here's what I found from Apple (It doesn't specifically mention 64bit however just win7): http://support.apple.com/kb/HT3920
This is not from Apple, but specifically addresses whether they support win7 64bit: http://www.macnn.com/articles/09/08/31/boot.camp.win.7.64.support/
Here is more info about bootcamp 3.0 and win7: http://www.apple.com/support/bootcamp/

When I boot up my iMac and hold down ALT it boots straight into windows 7 without giving me the option to boot OSX back up. Have I lost OSX and all my files completely? Please help

I set up boot camp for my iMac with windows 7. All was fine and it gave me the option to boot into windows.. I then used windows for a few hours and shut down the mac to boot back onto OSX when I was done.. This time my mac booted straight to windows 7 even with me holding down the ALT key it gave me no choice.
I'm assuming the boot camp set up was wrong somewhere but is there a way to get back on to OSX now?? Please help

1. Have you tried both Alt keys - maybe your Alt key is dead.
2. Do you have wireless keyboard? Have you tried to change batteries? USB Keyboard?
3. If your Win is installed correctly then you have also installed all windows support software.
There should be Startup manager like on the Mac (next to the clock little bootcamp app or in control pannel) to restart your Mac into the Mac partition.

Black screen when log into windows with microsoft account enabled

Hi everybody,
if i login into windows with my microsoft account enabled, then my screen is black for a while and then windows will show my desktop. Anyone with the same problem?

TC
Can we assume 9926 ? We could use more info. Did it do this since install? Was the install an upgrade? Did you have problems in the previous Os, etc, etc, etc.....
Wanikiya and Dyami--Team Zigzag

I am trying to transfer an old profile into Windows 7, but the AppData folder does not show up under my name folder in USERS. How can I find it?

When I go to Help & Troubleshooting & click Open Containing Folder I get a Windows Explorer window that shows the file path including Used-Edward-AppData, etc. But when I click on the little triangle to the right of Edward the drop down menu does not include AppData and if I just go into Windows Explorer and Users-Edward, there is no AppData folder. So I cannot overwrite the profile file with the saved profile info from my earlier laptop. The folder symbol next to Edward has a lock on it but I don't know what that means or how to unlock it.

%AppData% is the name of an environment variable.
On XP that variable points to C:\Documents and Settings\<user>\Application Data\
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders, use %APPDATA% in the File name field
See http://kb.mozillazine.org/Show_hidden_files_and_folders
You can use Help > Troubleshooting Information > Profile Directory > Open Containing folder
See also [[Using the Troubleshooting Information page]]

Qosmio F - Unable to load into Windows or anything

Yesterday, while studying other day outside another student bumped the table I was studying on. I would say "tapped" as it was not that hard. The normal message appears where it says the laptop will move the harddrive to a safe location etc.
Shortly after maybe 10-20mins, I get a message on the laptop screen asking me to "backup the laptop" as there was some major error or failure. I clicked on the "additional information" and it basically said all my drives C:, G: and whatever I had disk failure or something. Unable to backup the laptop as I did not have CD's present to back it up with I took it home to do i today.
The laptop is refusing to even load into windows at the moment. Unable to back up or anything. Keeps loading into options about system repair, restore, memory diagnostics etc. nothing fixes it.
I've only purchased the laptop since oct/nov of 2010. Didnt start using it till jan/feb of this year also. Should I attempt to open up the HDD as it might have loosen out at the back or? Should I send it back to manufacturer to look at? It's critical exam time for me and this is devastating! Also flying overseas late June after exams and wishing to take the laptop over there. Please help! Thanks advance for all advice and suggestions.

Hi Kyo,
Your posting is a little bit hard to understand and a screenshot of this error message would be useful but if you get an message about defective HDD and all partitions you should contact an authorized service provider in your country.
Your notebook should be still under warranty so the guys can replace the HDD for free. If you need some important data you can ask if they can rescue some files and do a backup. Alternative you can try it yourself if you buy an external HDD case for example. Then you can connect the HDD via USB to another computer.

Blue screen when logging into windows server 2008 r2

when logging into windows server 2008 r2, all I have is a blue screen and the mouse.
I tried looking for solutions on the internet, then I found a microsoft hotfix "http://support.microsoft.com/kb/2590550" I run the hotfix in command line but it gave me nothing, no error or success messages.
I tried to reboot but I still have the same problem.
Is there any solution to this problem ??

Hi,
Thank you for posting in Windows Server Forum.
Did you face this issue during remote session or console session?
In addition, have you try to change or install any driver\software which cause this problem?
Have you use any debugging tools from Microsoft to find respective error cause?
You can refer following article for memory dump.
How to read the small memory dump file that is created by Windows if a crash occurs
http://support.microsoft.com/kb/315263/en-us
Hope it helps!
Thanks.
Dharmesh Solanki

I'm also getting the dreaded Blue Screen Of Death when I boot into Windows

This happened right after I upgraded to the most recent version of iTunes. Everytime I initially boot the computer, it would get into Windows, crashes immediately, then my system reboots and I'm able to get into windows no problem.
Reading the help section it says to go and download & reinstall the previous version of iTunes. Ok simple enough, but where on earth can I find the previous version?? The link it provides takes me to the latest version. Maybe I'm looking in the wrong place?
Can someone please direct me to where I can download the previous version?
Thanks very much.

Hi,
Thanks very much for the reply. I'm glad somebody was able to give me this information!
So I went to the website and I downloaded 8.0.0.35, BUT when I tried to install it, I got an error message that said: "A later version of iTunes is already installed on this computer."
I'm afraid if I uninstall my current iTunes, then I will lose all my playlists and stuff. There's no way to just install the old version on top of the new one? If no, is that the proper procedure to uninstall first and then reinstall?
Thanks.

I have plugged my iphone 5s into windows computer, the computer picks up that its there and starts charging but keeps coming up with error message when i try connect to itunes... HELP!!!

I have plugged my iphone 5s into windows computer, the computer picks up that its there and starts charging but keeps coming up with error message when i try connect to itunes... HELP!!!

What does the error message say? (Precise text, please.)

IMAC will no longer boot into Windows 7 with Boot camp

I can see the partition on the Mac destop and can access it.
The windows options is available when I hold down the option key when booting but the computer appears to just hang.
I have been unable to get the Imac to boot off the Windows 7 dvd or a repair disk. I just get a white screen.
I could sure use some help trying to get the computer to boot back in Windows.
Thanks in advance.

Oddly enough I turned off the computer for a bit and turned it back on and it boot right into windows.......
I did have my Samsung phone plugged into the usb hub.....I wonder if that was causing some issues...weird.

My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

Hope this helps:
http://www.apple.com/support/iphone/assistant/itunes/

I tunes ll.2.0.115 into windows 8.1

Similar Messages

Maybe you are looking for