I tunes problems

when i try to open itunes i get a message "itunes can not be opened" -1712
what can i do?

Try deleting your iTunes preference files (com.apple.itunesxxx.plist, in your user's Library -> Preference folder) and see if that helps.

Similar Messages

  • Qosmio G30 TV tuner problem

    Dear All,
    Notebook Model: Toshiba Qosmio G30
    I have formatted notebook and installed Windows XP pro, I did my best installed all drivers and programs. I began to test notebook, I have seen one problem TV tuner. As we know before in notebook was Windows Media center edition. There we can easily use TV tuner with default soft.
    My question is that, in WINXP PRO, how can I use TV tuner? Antenna cable and other issues already solved. When I am pressing TV button in notebook no reaction. Please assist me to use TV tuner. In Drivers CD I have installed all drivers and programs, but still no reaction.
    Waiting your feedbacks!

    Hello guys
    It is very interesting discussion and I just want to write my comment about that.
    I dont know Ilyas what are you doing and for what is your company specialized but I dont agree with you. I will not write now about Toshiba notebook but about notebooks generally because all notebooks manufacturers have the almost the same policy.
    All notebooks have sticker where is written Designed for Windows XP. That means all of them MUST work well with this OS. Microsoft has designed media center edition for multimedia units that allow watching TV and also many other functions. Notebook manufacturers are responsible for own hardware and it MUST work under WXP (in this case media center edition). You have bought MULTIMEDIA notebook and after first start I believe it was everything ready for use. Am I right? Or you have found something dont want to work?
    Every manufacturer (electronic, card or something else) support just delivered product. If you make some changes and there is no original condition you can not expect the product manufacturer is responsiblefor that. Last week I bought sport outside mirror for my car. It doesnt match 100%. What you think, who is responsible for this, car producer or tuning-company? Car manufacturer is not obligated to test all tuning parts available on the market. The same situation is if you use some third part applications and see it doesnt work properly with hardware.
    Please be a little bit realistic about that. I am pretty sure you can configure your Qosmio G30 to work well with WXP Pro but you will discover that some functions can not work like with factory settings. Sorry but you must live with this. If you find out which application for watching TV works well please let me know.
    Good luck!

  • EZ Vinyl converter to I Tunes problem

    Hello, I am converting my old LPs to MP3 using an ION turntable and EZ Vinyl converter software. The turntable combined with the software records the music fine, when I click to finish, the software automatically transfers to Itunes....so far so good. But when the Itunes program is opened a box comes up indicating that EZ Vinyl Converter is "UNABLE TO EXPORT TO I TUNES.PLEASE MAKE SURE YOU CLOSE ANY ACTIVE WINDOWS IN I TUNES"
    What happens next is that certain tracks are exported to I tunes, but some are missing and most of the ones that are exported are duplicated. Any ideas anyone ?
    Many thanks.

    Thanks for your input ed2345. As I explained Audacity is complicated but you can record simply without having to wade through reams of instructions, the only thing is that LPs are recorded as one file or song, so when you transfer to ITunes it is treated as one song, so you cannot search for each individual track as you can if you load a CD to ITunes.
    There is a ficility on Audacity to have a break between each song so you can then search each track individually, but then that means you have to learn the editing side of Audacity and here lies the problem for me. I have spent the last 4 nights in bed for at least 30 minutes each night reading the Audacity instructions and I am only 10% through them and to be honest I am no farther ahead.
    On the EZ vinyl converter software that is so simple, there is a facility when recording the make a marker at the end of each track so then a new file or track is started.....the only thing is EZ Vinyl converter software has a problem at the moment !
    Anyway, here I am with 100s of LPs and not able to listen to them yet.
    Many thanks.

  • Mythbackend and hauppage USB tuner problems

    I'm coming from using ubuntu for the last year and I've switched over to arch around a month ago. Everything on my server is running nicely and I've learnt more about Linux in the last few weeks than I did in a year of ubuntu, but I've got one last little problem I can't wrap my head around.
    Please bear with me because I'm no where near my pc ( and won't be untill the weekend, but I've got remote ssh access to it if needs be )
    with ubuntu I've been using a hauppage wintv nova T500 pci and a wintv USB stick. The pci card mounts itself as 2 USB tuners. I've loaded the firmware for the tuners (they both use the same firmware) and they show up when I check lsusb and dmesg.
    I've tried mythtv from the repo and mythtv .22 built from the aur, both are giving me the same problem.
    Mythbackend is loaded as a daemon in my rc.conf file and it loads fine but then errors out as it can't find any tuners.  the only way I can get myth to work is to unplug the USB tuner and pci card, remove mythbackend from my daemons and when I start the pc up plug the USB tuner in after I get to the command prompt then manually start mythbackend. This way it works fine everytime but I can't use the pci tuner as I don't fancy plugging that in while the pc's on
    any help would be Appreciated as it's driving me nuts, I can grab any logfiles anyones after once I finish work (posting this from my phone at work)

    the output from that is:
    usbcore: registered new interface driver dvb_usb_dib0700
    dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
    usb 1-3: firmware: requesting dvb-usb-dib0700-1.20.fw
    dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
    dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
    dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
    dvb-usb: schedule remote query interval to 50 msecs.
    dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
    Modules linked in: cpufreq_userspace rfcomm sco bridge stp llc bnep l2cap it87 hwmon_vid ipv6 ext2 btusb bluetooth rfkill joydev hid_sunplus usbhid hid fan battery ac snd_hda_codec_realtek powernow_k8 freq_table snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_hda_intel fuse dvb_usb_dib0700 snd_hda_codec snd_hwdep snd_pcm snd_timer ohci_hcd dib7000p snd ehci_hcd dib7000m dvb_usb mt2266 tuner_xc2028 dib3000mc dibx000_common mxl5007t xc5000 s5h1411 mt2060 parport_pc ppdev lgdt3305 nvidia(P) lp thermal parport psmouse pcspkr i2c_piix4 serio_raw button processor agpgart usbcore r8169 miisoundcore snd_page_alloc dvb_core dib0070 wmi sg evdev i2c_core rtc_cmos rtc_core rtc_lib ext4 mbcache jbd2 crc16 sd_mod pata_acpi pata_atiixp ahci ata_generic libata scsi_mod
    thats just the usb tuner plugged in, i took the pci one out before i left for the week.
    to me it looks as if its registered properly and everythings fired in. But like i said im new to Arch and i was kinda used to just plugging stuff into ubunutu and it automagically working

  • I tunes problem driving me mad - please help

    Hi, I've just got a new laptop and have installed i-tunes on it. I have copied all my music to the hard drive from my previous computer and i-tunes has has automatically placed all of the music in the i-tunes library. The problem is that for some reason the library is showing 3 copies of each song even though there is only one of each on the hard drive. i have tried removing i-tunes and reinstalling but it is still happening. i have looked through the i-tunes settings but can't work out why it is happening. i dont want to have to go through the library deleting songs as it would take forever...
    Has anyone else had this problem? any help would be greatly appreciated
    Thanks

    sometimes different songs are placed under one name and also it looks through multiple directories.try to single the folder out for music and then it might work
    hope i helped.

  • TV tuner problems - can anyone help??

    I have recently bought a second hand MSI/Time Computers Media center, the operating system had been wiped by the seller. the machine is basically an MSI Mega 865 with an nVidia FX5200 graphics card with TV-out and an unidentifiable TV tuner card - more of that later.
    I have loaded to the machine a new/legal OEM copy of XPMCE 2005, and on startup it displays a notice that the Media Centre has experienced a problem with the TV capture device and is disabling it. I have tried TV tuner  drivers from MSI, nVidia and Time computers but all give the same response. a couple of them appear to fit and show no conflict in 'device manager', but they all elicit the same response.
    The TV tuner card is 'green' in colour as opposed to the usual MSI 'red' and bears the number MS 8610 (this also the FCC model number), it has a std coax TV, s-video and audio in sockets .
    Can anyone point to the correct driver for this card or is the whole thing a lot more labyrinthine than I realise.
    Yours bemused.
    Mark H.

    I wonder if the card is made especially for Time Computers? I imagine that the unit is made under contract by MSI for Time because the front is a modified version of  the standard Mega unit ie the knob is on the right. In that case the driver would be on the http://www.timesupport.co.uk site, but I have tried all three there to no effect.
    Is the setting up of the driver to card relationship more critical than I realise or should the XPMCE setup wizard take care of this.
    I will try the drivers you suggest.
    Thanks.

  • I tunes problem

    i had the problem on itunes when i opened it it said 'the file i tunes library cannot read because it was created by the a newer version'. well, i looked up how to fix it, followed the steps and it didn't work. but now i had a mess of copied libraries in my folder.
    anyhow, today i fixed it by clicking on one of the i tunes library files, that created a new empty itunes, i was then able to import my music folder into itunes, the one i have previously copied to the desktop as a backup.
    my question is, what in my itunes folder can i delete now? i'm afraid if i do anything, i'll mess it up again. also, i have 2 i tunes the one that works and the old 'broken' one but only one folder. hopefully someone can help me out.

    Menahem:
    By "Home," I presume you mean the Library (the top most item in the Source column).
    Tracks may get mixed up because you don't have them sorted properly. Go to the Library and make sure you are not in the Browse function. You should see a bar across the top, with some or all of the following headings:
    Name - Artist - Album - Time - Date Added - Last Played - Kind
    If you click on Album, all of the tracks will sort themselves by Album, in track order.
    Unfortunately, writing to the iTunes Music Store will not get your problem solved. Right now, feedback for the Store is limited to asking for song titles, and even when it was geared towards user improvements, there was no mechanism for responsing to user queries. Your best bet for any question is to try to find an answer in these Discussion fora.
    Lita

  • Tv tuner problem!!!!  this is urgent please help....

    Hi,
    I'm trying to capture vidfeo from tv tuner I've done it before with several kinds of tuners
    I'm using " Ati All In Wonder 128 " -display adapter with tv tuner- now and it is giving strange colors on JMF
    studio although it runs fine on Ati software
    any help will be good even any wild guesses will be helpful
    duke

    thanks for your reply
    this problem is fixed now after I captured another format UYVY instead of YUV
    but there is a nother problem if capture with 16 pits per pixel the screen is fine but with 24 a thick black line is at the top of the screen
    the problem is I can change the pits per pixel parameter in jmf studio
    but in my code
    I query the CaptureDeviceManager with a VideoFormat object (it has no way to set the pits per pixel)
    and it is giving the black line
    and when I try to query the CaptureDeviceManager with RGBFormat object to set teh pits per pixel
    It returns a 0 length array of capture device info
    are you familiar with such a problem
    thanks in advance

  • NVidia Capture Driver VS Leadtek TV Tuner problem

    I previously have used Leadtek WInfast TV Tuner 2000/XP before I installed MSI Geforce4MX 460-VTP with VIVO.
    I never installed the capture driver for the Geforce card though, because I do not see the need. Besides I prefer to use the tv tuner to record my tv programs.
    Another reason why I didn't install the NVidia capture driver is because I realize that it will cause some conflicts with the Leadtek TVTUner card driver because both are actually installing the same device drivers for the same tv-chip hardware located on both card.
    NVidia Capture Driver will install these hardwares in Device Manager:
    - Nvidia WDM Audio Capture
    - Nvidia WDM Crossbar
    - Nvidia WDM TVTuner
    - NVidia WDM Video Capture
    while, the Leadtek TVTUner driver will install the same driver for its own hardwares:
    - Winfast TV2000-XP Audio Capture
    - Winfast TV2000-XP Crossbar
    - Winfast TV2000-XP TVTuner
    - Winfast TV2000-XP Video Capture
    Surely installing Nvidia Capture driver & Leadtek TV TUner driver will cause WinXP confused because it finds 2 sets of the same hardwares.
    As I previously explained, I currently didn't install the Nvidia Capture Driver, and relies mainly on the Leadtek TVTuner to watch tv programs.  The problem is when I tried to use some recording softwares like TVTools, these softwares will only find the NVidia TV Tuner hardware instead of my Leadtek TV Tuner.  
    How could I solve this problem ?
    Is there any way to make both hardwares (Leadtek tv tuner & NVidia capture driver) work together ?

    It's got to be either a configuration issue or an incompatability with hardware because I have installed several of those cards on friends and client PC's without a single problem. I will say they all had nVidia VGA cards and either the nvidia or via chipset. I also have one and I can't find a better card for the $ and the ease of use, nice clean straight forward GUI and stability.
    Have you tried the latest drivers and PVS from leadtek's website?
    This thread should be in the VGA forum with a link here just in case a user with your mobo has this card.
    It's not in a shared slot is it? Have you looked for IRQ conflicts? Try removing the bluetooth and modem temporarily so you only have that one TV card, then check the IRQ's. If you have to move the card to another slot. The best slots are the second and third one down from the top (where the AGP slot is) and not the first and the last slot. Try operation then. Does this fix the problem? If so then you have to find the best slots for the BT and the modem.
    Good luck.

  • [Athlon64] TV tuner problems on MSI k8t neo

    Hello,
     I used TV@nywhere Master. Since beginning it worked.
    After graphic card reclamation (MSI GeForce 6800 LE) I tried another graphic cards (at first Legend 64 [1 MB, PCI], later Riva TNT 2 vanta [16 MB, AGP], GeForce 5600 VIVO [128 MB, AGP]). With this Legend graphic card at first my PC beeps for a while, but Windows XP started (even without graphic drivers). I tried another graphic cards (with correct graphic drivers), but since then there was no video on my TV tuner (channels were recognized, sound was possible to hear, but only black screen). I got new GeForce 6800 LE card, but the problem was the same also with this card.
    I reinstalled windows XP several times, but always with the same behavior.
    Maybe similar as it is mentioned here:
    https://forum-en.msi.com/index.php?topic=27537.msg158205#msg158205 (TV@nywhere Master sound but only black picture.)
    I tested TV tuner at my friend's PC and it worked, so TV tuner is not broken.
    So I bought new TV tuner card (Sapphire theatrix 550), but this card was not even detected under Windows device manager.
    When I tried to install ATI drivers, I got BSOD and my PC was restarted.
    (there was no problem at my friend's PC [athlon xp 2200, nforce 2 chipset])
    Is it problem with PCI slots of my motherboard?
    My system:
    MSI k8t neo (k8t800 chipset)
    Athlon 64-3000+
    512 MB DDR
    MSI GeForce 6800 LE
    Windows XP SP2

    Just to note:
    there was also problem with network (not detected).
    Reclamation was necessary.
    There was no similar problem with returned motheboard.

  • TV tuner problems on Toshiba 40E220U

    I can only get 12 local channels using an UHF/VHF antenna, and because these are HD channels there are only really three channels.  I tried three separate antennas and got the same results.  I used the same antennas on two other TVs and got all (46) of the local channels. I even moved the Toshiba model 40E220U model to another room where the other TVs picked up the other channels and got the same 12 channel results.  Is there solution for this problem or is my tuner bad?

    Just to note:
    there was also problem with network (not detected).
    Reclamation was necessary.
    There was no similar problem with returned motheboard.

  • Airport Expres & Air Tunes Problem

    I have three airport express bas stations. Two newer ones (802.11n) and one older one (possibly first generation - certainly not "n" enabled anyway). I have them set to join my wireless network which is running through an Orange Livebox so I can have music played via airtunes in various rooms of the house. Whenever the microwave oven is used in the kitchen, the airport express unit that is in the kitchen immediately cuts out and goes to "blinking orange" mode, but it also takes out the base station in the lounge? Both of these are the newer "n" enabled units. However, the older airport express unit carries on fine?? It is equidistant with the unit in my lounge to the microwave and airport express unit in my kitchen. I also have a dual band II time capsule solely for backup purposes and this remains blissfully unaffected!
    My questions are as follows:
    1. Is the microwave oven interference a common problem and is there a way around it (other than not using the microwave!)
    2. If my older airport express unit remains unaffected, can I "down grade" the newer ones to say a wireless "g" mode to see if that helps?
    3. Am I being a complete techno spaz here and missing something completely obvious??

    Andy Eastwood wrote:
    1. Is the microwave oven interference a common problem and is there a way around it (other than not using the microwave!)
    You might try forcing a specific WiFi channel. For 2.4 GHz try channels 1, 6, or 11. In at least some countries the higher 5 GHz channels (>= 149) can use a much higher power level than the lower channels.

  • Dv7t - tv tuner problem

    Hello guys,
    I finally managed to get some channels after scan...but, when I click any of them it starts to play, but only for about 5 seconds. Then it freezes
    I have Win7 x64
    Any ideas?
    Thank you

    When I use  the antenna I have seen this, and the cause was not a strong enough signal. It was corrected by changing the location of the antenna. I also have an outdoor antenna that I can use. No problems with that antenna.
    Are you on cable or antenna when this happens ?

  • Query Tunning Problem

    I am using oracle Db 9.2.4 ,
    Beloq query is taking lot of time ie.5mins, can anybody help me to tune the query....
    SELECT    LTRIM
                 (RTRIM (   DECODE (tit_name,
                                    'MR.', 'CA.',
                                    'MS.', 'CA.',
                                    'MRS.', 'CA.'
                         || ' '
                         || mrh_first_name
                         || ' '
                         || mrh_middle_name
                         || ' '
                         || mrh_sur_name
                         || ' '
                         || DECODE (mrh_appr_uid,
                                    NULL, NULL,
                                    DECODE (mrh_mem_status,
                                            2, NULL,
                                            DECODE (mrh_fellow_status_yn,
                                                    'Y', 'FCA',
                                                    'ACA'
                         || DECODE (mrh_resi_status,
                                    'A', '                         AIR - MAIL'
                         || CHR (10)
           || DECODE (mrh_cop_status,
                      1, DECODE (mrh_cop_type,
                                 13, 'CHARTERED ACCOUNTANT' || CHR (10),
                                 NULL
                      NULL
           || LTRIM (RTRIM (mrh_prof_addr_line_1))
           || DECODE (mrh_prof_addr_line_1, NULL, NULL, CHR (10))
           || LTRIM (RTRIM (mrh_prof_addr_line_2))
           || DECODE (mrh_prof_addr_line_2, NULL, NULL, CHR (10))
           || LTRIM (RTRIM (mrh_prof_addr_line_3))
           || DECODE (mrh_prof_addr_line_3, NULL, NULL, CHR (10))
           || LTRIM (RTRIM (mrh_prof_addr_line_4))
           || DECODE (mrh_prof_addr_line_4, NULL, NULL, CHR (10))
           || LTRIM (RTRIM (   city_name
                            || '-'
                            || mrh_prof_zip_postal_code
                            || DECODE (mrh_resi_status,
                                       'A', CHR (10) || cou_name,
                                       NULL
                    ) l_common,
           DECODE (mrh_appr_uid, NULL, 'T', 'P') p_t_flag
      FROM cadata3.om_mem_reg_head, cadata3.om_city, cadata3.om_country, cadata3.om_title
    WHERE cou_code = mrh_prof_cou_code
       AND city_code = mrh_prof_city_code(+)
       AND mrh_title = tit_code(+)
       AND NVL (mrh_clo_status, 0) != 1
    164245 rows selected.
    Elapsed: 00:04:26.09
    SQL> select * from table(dbms_xplan.display);
    PLAN_TABLE_OUTPUT
    | Id  | Operation                |  Name                  | Rows  | Bytes |TempS
    pc| Cost  | Pstart| Pstop |
    |   0 | SELECT STATEMENT         |                        |   164K|    25M|
    PLAN_TABLE_OUTPUT
      |  2332 |       |       |
    |   1 |  HASH JOIN               |                        |   164K|    25M|
      |  2332 |       |       |
    |   2 |   TABLE ACCESS FULL      | OM_COUNTRY             |   676 | 12168 |
      |     3 |       |       |
    |   3 |   HASH JOIN OUTER        |                        |   164K|    22M|    2
    3M|  2296 |       |       |
    PLAN_TABLE_OUTPUT
    |   4 |    FILTER                |                        |       |       |
      |       |       |       |
    |   5 |     HASH JOIN OUTER      |                        |       |       |
      |       |       |       |
    |   6 |      INDEX FAST FULL SCAN| IDM_OM_CITY_CITY_NAME  | 24226 |   449K|
      |    11 |       |       |
    |   7 |      PARTITION LIST ALL  |                        |       |       |
      |       |     1 |     7 |
    PLAN_TABLE_OUTPUT
    |   8 |       TABLE ACCESS FULL  | OM_MEM_REG_HEAD        |   164K|    18M|
      |  1155 |     1 |     7 |
    |   9 |    TABLE ACCESS FULL     | OM_TITLE               |     8 |    88 |
      |     2 |       |       |
    PLAN_TABLE_OUTPUT
    Note: cpu costing is off, 'PLAN_TABLE' is old version
    17 rows selected.
    SQL>
    SQL> select index_name, COLUMN_NAMe,column_position from  dba_ind_columns where
    table_name='OM_MEM_REG_HEAD' and column_name like 'MRH_PROF%';
    INDEX_NAME
    COLUMN_NAME
    COLUMN_POSITION
    IDM_MRH_PROF_CITY2
    MRH_PROF_CITY_CODE
                  1
    ABC
    MRH_PROF_REGION_CODE
                  1
    INDEX_NAME
    COLUMN_NAME
    COLUMN_POSITION
    ---------------After using an index hint in the query of the table OM_MEM_REG_HEAD, timing of the query goes down to 3.5 mins,pls suggest me to tune the query so that the timing of the query goes down.....

    Pls find a tkprof report
    TKPROF: Release 9.2.0.4.0 - Production on Mon Aug 18 11:53:08 2008
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.
    Trace file: G:\oracle\admin\hotest\udump\hotest_ora_3216.trc
    Sort options: prsela  exeela  fchela 
    count    = number of times OCI procedure was executed
    cpu      = cpu time in seconds executing
    elapsed  = elapsed time in seconds executing
    disk     = number of physical reads of buffers from disk
    query    = number of buffers gotten for consistent read
    current  = number of buffers gotten in current mode (usually for update)
    rows     = number of rows processed by the fetch or execute call
    SELECT    LTRIM
                 (RTRIM (   DECODE (tit_name,
                                    'MR.', 'CA.',
                                    'MS.', 'CA.',
                                    'MRS.', 'CA.'
                         || ' '
                         || mrh_first_name
                         || ' '
                         || mrh_middle_name
                         || ' '
                         || mrh_sur_name
                         || ' '
                         || DECODE (mrh_appr_uid,
                                    NULL, NULL,
                                    DECODE (mrh_mem_status,
                                            2, NULL,
                                            DECODE (mrh_fellow_status_yn,
                                                    'Y', 'FCA',
                                                    'ACA'
                         || DECODE (mrh_resi_status,
                                    'A', '                         AIR - MAIL'
                         || CHR (10)
           || DECODE (mrh_cop_status,
                      1, DECODE (mrh_cop_type,
                                 13, 'CHARTERED ACCOUNTANT' || CHR (10),
                                 NULL
                      NULL
           || LTRIM (RTRIM (mrh_prof_addr_line_1))
           || DECODE (mrh_prof_addr_line_1, NULL, NULL, CHR (10))
           || LTRIM (RTRIM (mrh_prof_addr_line_2))
           || DECODE (mrh_prof_addr_line_2, NULL, NULL, CHR (10))
           || LTRIM (RTRIM (mrh_prof_addr_line_3))
           || DECODE (mrh_prof_addr_line_3, NULL, NULL, CHR (10))
           || LTRIM (RTRIM (mrh_prof_addr_line_4))
           || DECODE (mrh_prof_addr_line_4, NULL, NULL, CHR (10))
           || LTRIM (RTRIM (   city_name
                            || '-'
                            || mrh_prof_zip_postal_code
                            || DECODE (mrh_resi_status,
                                       'A', CHR (10) || cou_name,
                                       NULL
                    ) l_common,
           DECODE (mrh_appr_uid, NULL, 'T', 'P') p_t_flag
      FROM om_mem_reg_head, om_city, om_country, om_title
    WHERE cou_code = mrh_prof_cou_code
       AND city_code = mrh_prof_city_code(+)
       AND mrh_title = tit_code(+)
       AND NVL (mrh_clo_status, 0) != 1
    OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        4      0.01       0.05          2         16          0           0
    Execute      5      0.00       0.03          0          0          0           0
    Fetch    10258      4.78      23.62      12420      12157          0      153818
    total    10267      4.79      23.72      12422      12173          0      153818
    Misses in library cache during parse: 3
    Misses in library cache during execute: 1
    OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        9      0.00       0.00          0          0          0           0
    Execute     10      0.00       0.00          0          0          0           0
    Fetch       10      0.00       0.06          5         21          0           8
    total       29      0.00       0.06          5         21          0           8
    Misses in library cache during parse: 2
        5  user  SQL statements in session.
        9  internal SQL statements in session.
       14  SQL statements in session.
    Trace file: G:\oracle\admin\hotest\udump\hotest_ora_3216.trc
    Trace file compatibility: 9.00.01
    Sort options: prsela  exeela  fchela 
           1  session in tracefile.
           5  user  SQL statements in trace file.
           9  internal SQL statements in trace file.
          14  SQL statements in trace file.
           6  unique SQL statements in trace file.
       10522  lines in trace file.here we can easily seen rows/call is much greater than elapsed/call......
    pls suggest...

  • Still need help i tunes problems

    this is what i have so far
    ok first off i know a good amount about comps so please dont treat me like a noob
    where to get started...ok well my computer updated one night and then i tried to update my itunes and it wouldnt up date...then i tried to go to my desktop to open itunes and it wouldnt open. So then i went to start-all programs-itunes and it still wouldnt open. So then i when to my computer program files and tried to go in there to get it to launch and it still wouldnt. Then i tried to do what most people that have windows do i tried a uninstall reinstall of itunes and it wouldnt uninstall it was saying that it was missing the itunes msi file or some crap like that im really starting to get frustrated with this crap so if any one can help me please do so also if any one knows of any other programs that are compatible with the ipod so i dont have to use itunes please inform me of that program thanks
    cuztom Windows XP Pro
    Rachyl
    Posts: 2,699
    From: Carrboro, NC
    Registered: Sep 13, 2005
    Re: apple+windows=bad(itunes problems)
    Posted: Mar 16, 2007 6:30 PM in response to: cwhittaker06 Reply Email
    Hmm...I was having just a bit of trouble following what you were trying to say. It seemed to kinda ramble on. So, what exactly did the error message say when you re-installed? The first time when you noticed the iTunes trouble, did you just get an hourglass that flashed away or was there some sort of error message that said iTunes has encountered a problem...? I Kinda need to know what exactly happened when so I can get a grasp of what's going on.
    Thanks,
    Rachyl
    Just an Aussie in America!  iMac G3;  iMac G4;  iBook  Mac OS X (10.4.7)  Mac OSX Panther  Mac OSX Tiger80 gb iPod
    cwhittaker06
    Posts: 2
    From: florida
    Registered: Mar 15, 2007
    Re: apple+windows=bad(itunes problems)
    Posted: Mar 16, 2007 10:33 PM in response to: Rachyl Reply Email
    when i try to install/uninstall it says this--The feature that you are tring to use is on a network resource that is unavailable...then it comes up with another error and says
    the path
    C:\DOCUME~1\CWHITT~1\LOCALS~1\Temp\IXP133.TMP\Itunes.msi cannont be found.Verify that you have access to this location and try again, or try to find the installation package 'Itunes.msi' in a folder from which you can install the product Itunes
    then i click ok then i have to click cancel and it comes up with another one and says the installation source for this product is not available. verify that the source exsist and that you have access to it.
    then i have to click ok so please tell me what i can do
    cuztom Windows XP Pro
    cuztom   Windows XP Pro  

    it wouldnt uninstall it was saying that it was missing the itunes msi file
    with that one, let's try the following procedure.
    first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
    next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
    Description of the Windows Installer CleanUp Utility
    next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
    Removing iTunes and QuickTime for Windows
    now try another itunes install. does it go through properly this time?

  • Mega 865 TV-tuner (the "optional" MSi-tuner) problem, XP media center

    I've built a MEGA 865 pro setup, with the optional TV-tuner from MSI.. And installed Windows XP Media Center edition. But the XP media-center doesn't recognize my tv-tuner. Doesn't it support it ?
    And does anybody know if the Microsoft Media center keyboard will work with this computer ?

    MediaPortal
    a good free alternative, but if you have spent money on WinXP MCE, then better to spend a little more getting that working correctly
    get a compatible TV tuner and the Microsoft MCE Remote & receiver, forget about InstantOn, and you'll have a nice HTPC system there#
    Windows XP Media Center Edition FAQ

Maybe you are looking for

  • Unstable system - Apps crashing

    Hi, from few days, some applications crashed. It happened with Lightroom and Safari. No update perfomed on application or osx. From console log start like this Process:         Adobe Photoshop Lightroom 5 [410] Path:            /Applications/Adobe Ph

  • Problem in Create Routing

    Hi folks, I have using BAPI_ROUTING_CREATE for routing creation. Its working well for all conditions.But in case of Component Allocation i am getting the below error msg, i have passed the following fields Activity,BOMTYPE,BOMNO,ALTERNATIVEBOM,QTY,UN

  • Problems with the "INSERT" button.

    Hi, I have a problem in my homework. I am required to do the following: 'original numbers' array contains zeros. Let LabVIEW fill an array "original numbers" by random integers from 10 to 90 at a rate 1 number/0.5 seconds by replacing each zero at a

  • Which router do you use for AppleTV?

    So I got to thinking the other day that maybe there are just certain routers that no matter what will not work with AppleTV. The only one that I have gotten to work EVERY time and consistently is the Airport Extreme Base Station. My gf had a belkin (

  • Hyperion Business rules

    HI All, The scenario is such that I have two set of data forms. One is for monthly level budgeting and the other set of forms is for Yearly budgeting data. Now, when I punch the data into the Yearly values, it has to evenly distributed into the month