I tunes reads laptop memory when ipod plugged in

I have abn i pod nano which until today has worked fine... but from today when i plug my nano onto sync lead.. i tunes operns as normanl but then askes me to register nano... in the left field it seems to read the laptop memory when the ipod is higlighted.... i.e telling me i hav 40 gig of free memory
Any idea?? please help!!!!

Do you have any other networked drives or external drives? I have experienced the problem with a Shuffle on a PC that is connected to network drives.
The solution is fairly simple yet not obvious. You need to force a drive letter for the Nano because XP is getting confused. It is trying to assign the same drive letter as something else (your 40GB drive) and reporting the wrong info.
1. Go to Control Panel and open Administrative tools.
2. Click on Computer Management
3. In Computer Management highlight Disk Management at the bottom of the list.
4. Now you should see all of your drives, including the Nano. The Nano should have the short name you gave it. Click on the drive representing your Nano and right click. Select Change Drive Letter and Paths...
5. You will see a window listing your drive and the buttons, Add, Change, Remove, OK, and Cancel. Click Change.
6. Now there is a new window. Make sure Assign the following drive letter: is checked and use the drop down box on the right side to select your new drive letter. Select something far way from the rest of your drives - I, J, K etc...
7. Click OK.
8. You will see a notice about changing a drive letter. Click Yes.
9. Your drive should now have a new letter and iTunes will be able to read it properly.
You may have to do this twice before XP remembers to set that drive letter from then on. After that you should no longer have any problems.
Take care.

Similar Messages

  • HT204370 I downloaded an HD movie onto my laptop from i-tunes.  It plays fine on my laptop, but when I plug in my HD projector, the movie quits.  When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes mov

    I downloaded an HD movie onto my laptop from i-tunes.  It plays fine on my laptop, but when I plug in my HD projector, the movie quits.  When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes movie before this. Someone told me that i-tunes changed something so that movies can no longer be projected.  We have a home theatre and have watched movies this way quite regularly, so it would be a drag if Apple will prevent us from doing this in the future. 

    I don’t know about projection, but I’m unable to watch HD content in iTunes because my Apple 30-inch Cinema Display is not HDCP-compliant (which is part of an HD copy-protection scheme).
    The other movies you’ve projected, were they HD as well? If not, it could be the same problem: your projector is not HDCP-compliant.

  • Basically my laptop had all my music from my iPod on it however I now have a new laptop and when i plug in my iPod my music wont come up. How do I get my music library back onto my laptop?

    Basically my laptop had all my music from my iPod on it however I now have a new laptop and when i plug in my iPod my music wont come up. How do I get my music library back onto my laptop?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • When iPod plugged in it tells me it can't be used because the mobile device service isn't started. It is not a phone and I've updated before. Any thoughts?

    When iPod plugged in it tells me it can't be used because the mobile device service isn't started. It is not a phone and I've updated before. Any thoughts?

    See Here...   http://support.apple.com/kb/TS1567

  • I have recently purchased a new laptop. When I plug in my iPhone in, I cant sync my phone, back it up or access any of my music. iTunes doesnt even pick it up. It all worked fine on my old PC. What do I do?

    I have recently purchased a new laptop. When I plug in my iPhone in, I cant sync my phone, back it up or access any of my music. iTunes doesnt even pick it up. It all worked fine on my old PC. What do I do?

    http://support.apple.com/kb/ts1538

  • Itunes freezes when ipod plugged in, computer wont recognise it.

    I know it's a common problem but when I plug my IPod Classic into my laptop, it causes itunes to freeze and won't respond to anything unless I unplug the IPod.
    It started when I was playing a tune on itunes and plugged the ipod in. Itunes was still starting up and the conflict seemed to confuse it and caused the problem.
    If I plug the ipod in, my computer recognises it as a drive, not an ipod, but the device manager does recognise it and says it is working fine.
    I've tried to restore it on my computer but it doesn't do anything until I unplug it, then of course it can't find the device. Plug it back in and again, won't respond to any commands until the ipod is unplugged.
    The ipod seems to play ok on my dock so the problem lies with the communication with the ipod and the computer.
    I've updated itunes, checked the ipod is up to date, even bought a new cable. I've tried it in disk mode but I don't seem to be able to do anythng to either fix the problem, or restore my ipod.
    I am using Windows 8.
    Any help would be great.
    Thanks.

    Hello there, peteg1969.
    The following Knowledge Base article offers up some great trecommendations for the issue you're describing:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • ITunes 10.3.1.55 opens when iPod plugged in

    Hello,
    I have iTunes configured to not open automatically when I plug my iPod touch 4G in, but it still opens automatically when I plug it in.
    I am unable to enable or disable the checkbox to Open iTunes when this iPod is connected.
    Has anyone else been able to stop iTunes from opening when plugging their iPod or iPhone in?
    Thanks,
    Dave

    Thank you for your answer, but it's not really helpful since I need to manually manage my music because I don't use iTunes as my music program.  I was able to solve my problem by disabling the iTunesHelper process.

  • "USB device not recognized" when ipod plugged in???

    (ipod mini 4gb)
    When I plug my ipod into my laptop I get the message: "USB device not recognized." It says the device has malfunctioned!!! If I click on this error message it says my ipod is an unknown device and no drivers are installed for it???
    It was working fine until a few days ago. If i reset it I can charge it up but that's all, it still does not appear in itunes or on my computer.
    I've tried eveything on the help website but nothing works! Can anyone help?!
    patriot 3050   Windows XP  

    ok my question is do you have a mac or windows based laptop
    here is why and what happened to my ipod mini
    my ipod mini was connected to my macintosh charging while i was using my imac and it came up with a system update 10.4.3 i installed it and finished installing it and afterwards my apple wouldn't recongnize my ipod mini or even display it one the screen i found out by myself that when the apple update got to the end of the update it installed new hard drive drivers but also installed the drivers on the ipod mini which locked out the mini's internal hard drive and my mini then stop responding it would play music and charge but wouldn't connect to the computer
    so what i did to fix it was this
    i went into utilites in mac os x tiger or any version of os x has this and selected disk utility you will notice that the ipod will appesr in disk utility but not on the desktop this is due to a recent system update driver that isn't compatible with the internal drive on the ipod mini so in disk utility just select format the drive in a mac os partition standard works the best it will then format the ipod and the ipod will apear in the desktop again but not as a ipod let me explain when you format the ipod using the disk utility it formats and even erases the firmware of of the hard drive on the mini so when you are done formating the ipod run the ipod updater to reinstall the ipod's operating system and presto your ipod will now work again
    warning: i don't know how to fix this on a ipod in windows so if this is a windows based laptop you need to find someone witha macintosh to do this with sorry

  • ITunes 8 shuts down (error pop-up) when iPod plugged in.

    I recently updated to itunes 8 on a Windows XP. I can run iTunes and play music, except when I plug in my iPod. When I plug it in iTunes freezes and comes up with "iTunes has encountered an error and needs to shut down". Conversely, my iPod is recognised by Windows - it does the little sound when its plugged in; and its charging while its connected to the USB. Therefore the problem seems to be in syncing?
    I have tried so many things. I have restarted my computer, tried uninstalling and reinstalling iTunes (x2), I have restarted my iPod several times, and I have tried installing QuickTime separately (I read it might have been a glitch with QuickTime). I'm so frustrated, hopefully you guys will be able to guide me in the right direction
    Cheers.

    hi allimal!
    iTunes works alright until I plug in my iPod, then it shuts down saying something about iTunes has unexpectedly encountered an error and must shut down.
    what version of itunes do you have? to check, go "help > about itunes", and wait for the version number to scroll up from the bottom. for example, i have a 6.0.4.2.
    if you've got a 6.0.2.23, see:
    iTunes 6.0.2 quits unexpectedly when you connect ipod
    love, b

  • IContinual "recovery mode" cycle when iPod plugged in

    I'd be grateful for any assistance with this one, this is my 2nd iPod in 2 days as the first one had a broken screen so i'm getting a bit fed up.
    I have an 80Gig Classic and am running a PC/XP Home and the latest version of iTunes. I also have a Mac but it doesn't have a sufficently "new" version of the OS to support my new iPod so it isn't an option.
    When i plug the new ipod in i get the message "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes."
    I carry out the restore, the iPod disconnects and reconnects (in software, i don't unplug it) and up pops the same error message again. I've done the reset/reboot thing to no avail. I did once get as far as entering the name of the iPod etc. but my success was brief and as soon as i disconnected the iPod and reconnected it i was back to the recovery mode loop.
    I hope this is something simple and i'm not going to have to return yet another iPod so all suggestions are gratefully received.

    I have a similar problem with my 80 gig. Downloaded the 1.0.3 update. When the installation was finished, I got a message sayng I had to recover to use the iPod with iTunes. And so I did. Now all I see is the "do not disconnect". When I disconnect it anyway, it says "Ok, to disconnect", and when I reconnect it, the disconnect message reappers. No matter how many times I recover, the same message keeps popping up. Reseting the iPod does not work either.
    Now, the problem now is that when I use the guide linked to, the iPod doesn't show up when I go to Disk Management, which means I cannot reassign any letter. I should note that I can't access it as an HD from My Computer, I'm only given a message that says "Insert a disk in station K:" In addition, Windows seem to be unable to identify any specs of the iPod, such as size etc.
    So it seems like the update messed up my iPod. I have no clue on what to do.

  • Pm Quick silver freezes when ipod plugged in

    I have a power mac g4 quick silver 733mhz 768MB Ram running os 10.4.11  when i plug in ipod it freezes the computer.
    I do not have any anti virus software running.
    This also happens when i try to plug in 1gb flash drive  no matter which USB  port i use.
    I am baffled...any help would be greatly appreciated!!

    Yes, run DU first.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport in 10.4 & below, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons
    If it does it in both then it would seem to be a Hardware problem... iPod, cable, Mac???

  • Screen freezes right when iPod plugged in to charge

    Hey guys. my iPod screen froze, right when i plugged it into my mac. Screen shows 'Connected - Eject before disconnecting' I've tried removing it, replugging it. Screen's lit up. Nothing works. The blessed thing is only 3 weeks old. Help anyone?!

    This Apple knowledge-base article may help address that issue.
    Windows confuses iPod with network drive.

  • ITunes Freezes when iPod Plugged in

    Hi All,
    I'm trying to help someone out who has owned an iPod mini 4gb for 5 months now, but still hasn't got it working!
    1) Initial problem was that iPod, when switched on displayed the folder and exclaimation icon
    2) This was resolved by doing a firmware update and a restore (10/01/2006 release) which we had to do on another PC
    3) Following this, the iPod worked OK on a different machine. Original machine recognises iPod, but doesnt load iTunes automatically. Also if we load iTunes before plugging in the iPod iTunes freezes - Unplugging the iPod releases the freeze.
    4) We then deinstalled and reinstalled iTunes (v6.0.1.3) which didn't help.
    5) The same problem is apparent when I plug my 30gb 5G iPod into the original machine. (Which works AOK else where!)
    6) We've also tried removing all USB drivers and letting XP redetect them - Didnt help!
    - Other USB devices seem to work AOK
    - Windows XP SP2 running on a Dell Dimension 3100
    - Have removed all unrequired software from startup
    - No firewire port
    Any ideas anyone? Please?
    Cheers!
    Simon

    Hi,
    Thanks for the reply, do you mean uninstall the updater software first, or iTunes?
    Also, do you know what causes this problem? As you suggest using an earlier firmware, I'm guessing some aspect of a later version is to blame?
    Any idea what version I should try?
    Thanks again!
    Simon.

  • ITunes Freezes When iPod Plugged In. Please Help!

    Two years ago I got a 2nd Gen. iPod nano. It worked for a while, but then it started freezing iTunes when I tried to sync it. So I got a 3rd gen. nano. It worked on one computer, then I wanted to put iTunes and start syncing it on another computer. So i transferred all of my songs to the other computer.Which was the same computer I synced my old iPod. I synced my new iPod once and all of my songs went to it. The next day I tried to sync it and as soon as the computer reconized my iPod, iTunes froze. As soon as I unplugged it it unfroze. That was what happened when I plugged my 2nd gen nano in. So now i cannot sync my new iPod because iTunes keeps freezing. Do you know what I could do to fix this problem??

    Hi,
    Thanks for the reply, do you mean uninstall the updater software first, or iTunes?
    Also, do you know what causes this problem? As you suggest using an earlier firmware, I'm guessing some aspect of a later version is to blame?
    Any idea what version I should try?
    Thanks again!
    Simon.

  • Computer restarts when iPod plugged in

    When I plug in my iPod to update it, windows/my computer restarts itself, turning off momentarily and then having to restart windows. When it does, iTunes opens and everything works fine, but I'm just wondering WHY this is happening and if there's a way to fix it??

    are you getting any sort of blue screen? if so, what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
    if the blue screen mentions a specific file, let us know what that is called too. (exact spelling, please.)
    here's a reference on the sorts of things i'm asking about:
    Troubleshooting Windows Stop Messages
    if you're not seeing a blue screen (or just a flash of one), we can use this technique to make hidden blue screens appear for us:
    1) Open your system control panel (Start->Control Panels->System).
    2) Select the "Advanced" tab.
    3) Click the "Startup and Recover" section's "Settings" button
    4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.

Maybe you are looking for

  • Sound output choices don't always stay fixed

    On my mac pro, when I select headphones as my output for sound in my preferences, some things do not respect this and instead play sound through my external speakers, most noticeably in flash player videos. In fact, playing some videos in a flash pla

  • File - XI/RFC - Idoc

    My scenario is I get a file with multiple records. I need post these into R3 using Idoc. Since File doesn't have all the fields required, I have to get missing fields from R3 to which I'm ultimately posting. I get StateCode from inpu file record. Bas

  • 2+ months and X220 replacement still unresolved

    I bought a X220, and after a few months it developed a hard drive 2100 error.  It seems to be a problem in the motherboard, as several working HDD and SSD would not work, but it just works fine with my other Thinkpads.  So now I arrange it for a retu

  • Autoscrolling in the DropTarget (Drag and Drop)

    I have implemented Drag and Drop using DropTargets and a DragSource And DragGestureListener. The DropTarget I have is a customized JComponent. How can I make the DropTarget autoscroll for Drag and Drop events??

  • Need help in finding the position of a SubString in a String

    Hi All, I have a VARCHAR2 column in my table which has data similar to '152-425-3265-8-5623-45'. I want to find the position of the numbers in the column. For example: If i give 8 - query should return me 4. If i give 425 - query should return me 2.