I tunes says cant read or write to disk when tryiing to sync to down load podcasts

I cant Download podcasts. It syncs and only downloads a small part then stops. Then gives me a message can no read or wwrite to disk.

Only with podcasts?  Does it sync completely when syncing songs? 
Do you use automatic syncing to load content, or do you use the manual method (drag items to iPod in iTunes)?
It seems like the iPod's disk does not stay mounted during the sync process.  As a test, try shutting down (powering off) the computer and disconnecting all USB devices, including hub (except for standard keyboard and mouse if normally used).  If your computer is a laptop, connect its power adapter (so that it's not running on battery power).  Do this to Reset (restart) the iPod
http://support.apple.com/kb/ht1320
Start up computer, run iTunes, and connect the iPod.  Try syncing podcasts as before, and note if there is any difference regarding this problem.

Similar Messages

  • Ipod will sync up once then says cannot read or write to disk.

    Is this normal? The IPOD shows up in Itunes after the first sync but when I go and try to update the ipod again it says it cannot read or write to disk. Tech support says this is normal but it does not make any sense as the IPOD still shows up in Itunes.

    the IPOd will sync up when I fiorst plug it in. the problem is when it is finished, Itunes says ipod update complete you can disconnect. I leave it connected, and if I try to update the ipod again after I download something or whatever into Itunes it comes back with the cannot read from or write to disk. I can unplug it and plug it back in and it work sfine. There is something with the software I guess that is not staying connected with the hardware after the first sync.

  • "cannot read or write to disk" when transferring itunes TV shows to iPod

    I have downloaded two TV shows from iTunes, but cannot get them transferred to my iPod. When I click "Update iPod," with one of the shows selected, it will begin to download to the iPod and get ALMOST to the point of finishing, and then I will get an error message stating that the iPod can't be read or written to. At first I thought I just had a corrupted video file (although it plays fine on my computer), so I downloaded a second TV show. Same thing. I have downloaded some music vidoes from iTunes, and they transfer perfectly to my iPod. I've noticed that since I downloaded the latest iPod updater and version of iTunes, that I've had the same problem getting a few songs to transfer to my iPod from CDs as well, with the can't read or write error. This only happens to maybe one song out of thirty, but it is still annoying. Maybe it is the updater??
    If anyone out there can help me, I would really appreciate it since I'm dying to watch these shows on my iPod! Thanks in advance!!
      Windows XP  

    I did the 5 R's last night, and now my iPod won't update any songs. The iPod is showing up in iTunes, but the "Update iPod" option is grayed out. Also, before when I had installed my iPod, it appeared in iTunes with my name...now it just says IPOD. I assume that's because it's back to the factory settings, but thought it was odd. (Yes, I know how to rename it.)
    Actually, after I ran the iPod updater to completely restore my iPod, it sat there frozen for hours with "Do Not Disconnect" on the screen, NOT flashing. Even after I disconnected the iPod (I had to turn off the computer completely to do this; otherwise, the USB port refused to stop running), the message just sat there. I had to reset it to get it to the point where I could select my language.
    Any suggestions? I'm considering just wiping out everything (backing up my files, natch) and starting over with the CD that came with the iPod in the first place.
    Windows XP

  • Rented Movie won't sync. "cant read or write to disk"

    I rented a movie, tried to movie it to my touch, and about 1/3 of the way thru, it says it cannot copy to the iPod, the disk could not be read from or written to" What. The. Heck. Why would it do that? anyone?

    Hi!
    Does you iPod Touch has the new free update (1.1.3). When you connect your iPod to the computer just click "Check for Update".

  • I purchased an audio book from I tunes but when I sync with my I phone it respond with error saying could not read or write the file. It only sync parts 2

    I purchased an audio book from I tunes but when I sync with my I phone it respond with error saying could not read or write the file. It only sync parts 2

    Those videos are probably not in an iPod-friendly format. It’s picky about that. You can try converting them, if possible.
    As for the audiobooks, are you sure they haven’t synced? You’ve enabled it to sync books and checked the “Audiobooks” section of your iPod?

  • Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

    hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
    iv unistalled flash, iv checked plug ins it just wont work,

    It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
    (If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
    * Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
    After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
    When you have installed the latest version of Flash, relaunch Safari and test.
    If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
    click Check Now. Quit and relaunch your browser.
    You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
    Use the FULL installer for 12.0.0.44:  Flash Player 12 (Mac OS X)
    And the instructons are here: Snow Leopard Clean Install.pdf
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
    Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • I am running windows 8 and have lightroom 5.5 and i have a error that says cant read from previous cache?  help

    I am running windows 8 and have lightroom 5.5 and i have a error that says cant read from previous cache?  help

    Using Windows Explorer, navigate to the folder that contains your catalog it's probably located in Pictures\Lightroom. In that folder you will find another folder with the extension .lrdata. You need to delete that folder and its contents, then start Lightroom again. And new previews folder will be created automatically, and you should be able to start using Lightroom normally.

  • Can't read or write some files, internet is failing, youtube won't load, software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar, etc. Malware?

    Specs:
    iMac 10.8.5
    3,4 GHz Intel Core i7
    32 GB 1600 MHz DDR3
    Can't read or write some files, internet is failing, youtube won't load, security software I tried to install was in Slovenian, not dutch or english like in my systempreferences settings, pictures and files won't preview with spacebar and are randomly corrupted, when I entered something in the Youtube searchbar (when it was still working) it send me to a site with sexadds.
    I tried restart my iMac and when I was logged back in, my dock preferences were reset.
    Also tried to download some security software to check my Mac for malware, but when I did, I tried several, I got a notification that said something like 'dumpfiles (don't know if this is the right translation...) damaged'.
    I'm taking screenshots from all the weird notifications I get and even three quarters off the screenshots I took in the last three hours are already unreadable.
    It started this morning when I tried opening a Premiere Pro file on which I worked the night before.
    When I tried opening it, it said the file was damaged and could not be openend.
    I tried opening it with AE or importing the file in a new project but nothing helped.
    When I tried looking for autosaves, this is the really weird part, there were none.
    Even though there are autosaves from my other projects, this one was completely gone.
    It looked like the day before never happened on my computer.
    Also when I openend Premiere all the recent projects had been wiped.
    So at first I thought it was a Premiere Pro failure.
    But than, later on the day, I tried loading some RAW files from my compact flash card.
    This is where I would get an error (error -36) which said some data cannot be read or written.
    I tried importing the files with a view different technics, from dragging to importing via Lightroom and I succeeded with Image Browser.
    But when I tried moving the files to an other folder the same error occurred.
    While dealing with this issue I wanted to put on some soothing music on youtube.
    This is when the next weird thing occurred: youtube wasn't completely loading in Chrome. I refreshed a view times, checked the internet connection and still no difference.
    When I tried in Safari it did work but when I clicked enter on the searchbar in Youtube, a page with sexadds appeared (I didn't install AdBlock in Safari...).
    I read about this 'phishing' where you are redirected to a site were a possible malware installment can take place...
    I don't know if it's connected to any of the problems I've been having but I just never experienced this on a mac, I have been a Mac user for 10 years now.
    On top of it all, internet started working worse and worse and now it's not even working at all. I had to fill in the password over and over, normally it remembers.
    Just like my system preferences, all the preferences I had with Chrome where also reset.
    Also somewhere in between I got this notification: Mac OS X must restore library to run programs. Type your password to allow.
    To me this is all very weird and suspicious. I have clearly no idea what's going on. Could this be another sort of trojan horse or malware?
    Some background info which could be helpful for solving this mystery:
    two months ago the one year old Fusion Drive in my iMac just broke out of nowhere.
    I got it replaced by a qualified apple repair store.
    When I got my computer back, all the files where gone.
    I got on the internet without AdBlock installed yet.
    A game or whatever it was, can't clearly remember, got installed by accident.
    I deleted it immediately.
    Only two weeks later, I couldn't log in to my account. It didn't recognize my password and username. 
    So I brought my mac back to the store.
    Here the repair guy said it was a minor thing and he just needed to reconnect my account. He also mentioned he found a downloaded game name Sparta and it probably had something to do with the error.
    I asked him; could it be a virus? He replied no way.
    I don't know why I couldn't be a virus, just because it's a mac doesn't mean it cannot be done.
    So today I tried installing anti virus software (such as avast- was in a weird language looked like slovenian, clamxav - was in slovenian) but I couldn't install them.
    PLEASE help me! I don't know what to do anymore, I work fulltime and I need my computer, I have no time to bring it in for repair, are there other perhaps easier ways?
    Could this be the work of a virus or a malware? Or is it a disk permissions issue?

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • "Can't Read Or Write to disk" Video Won't Transfer To Ipod

    I have transfered videos to my ipod in the past but I have two tv shows from the Itunes story that won't transfer.
    They are in the correct mpeg 4 whatever format. My itunes is the most resent version, but for some reason I keep getting the same error.
    "Cannot Read Or Write To Disk".
    HELP??!!
      Windows XP  

    I've got this problem too. My 5g iPod 30gig syncs after about 3 minutes with iTunes then after loading songs and videos after 10 minutes i get the same message your getting - "Can't Read Or Write to disk". I think theres some kind of USB2 conflict or something. All my other USB devices work fine. All my drivers and software is up-to-date.

  • I downloaded a movie on itunes and turned my computer off and when i turned it back on the movie wasnt there so i went to re download and it says check for available download and it still won't let me down load it. what do i do?

    i downloaded a movie on itunes and turned my computer off and when i turned it back on the movie wasnt there so i went to re download and it says check for available download and it still won't let me down load it. what do i do?

    Hi runner_girl7585,
    Thanks for using Apple Support Communities.  If you weren't ever able to watch your rental movie, you can report this to the iTunes Store:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Cheers,
    - Ari

  • IMac G5 cant read and write DVD-R

    Hi. I have iMac G5 1.9 with Superdrive MATSHITADVD-R UJ-846 with Firmware Revision: FA0G. Everything was OK, I was able to burn DVD-R and DVD+R too, but now Superdrive ejects all DVD-R disks. I cant burn it, I cant read it. DVD+R are working correctly.
    System Profile is saying, that I can burn DVD-R and DVD+R:
    D-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW, +R DL
    but everythime I try it, the disk is ejected.
    What is a problem? Can anybody help please.
    Thank you.

    To Apple Discussions!
    Make sure you have enough storage space to burn.
    Make sure the DVDs are not scratched, smudged and/or dirty.
    http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
    If your drive needs cleaning, cleaning kits can be purchased from any store that sells CD/DVDs.
    Also, check your Mac OS Help Menu for troubleshooting tips. In the search field type dvd.
    You can also open up the "Utilites Folder">Disk Utility.
    At the bottom left of the window, click on the black ? mark inside the purplecircle.
    The help window will open up.
    Enter dvd in the search field.

  • Passport cant read and write on two Macs

    Hi guys
    I have 2 Mac computers. One is a Mac pro With Mavricks operating sistem and the other is an old G5.
    When I try to copy file to a Passport hard drive (that Im using on my Mac Pro) from the G5 it says it can READ ONLY.
    Why cant it read and write?
    Please help me with this .. Im going NUTs here.
    Thanks

    Mac OS X version 10.4.4 transitioned for the older Apple Partition Map to the newer GUID partition table -- to support drives larger than 2.2TB and support a new Apple booting scheme for Intel Macs. The older Mac cannot read the newer Mac's partition map.
    Save the stuff from the drive to another location, and re-Initialize on the older Mac (all files will be deleted when you do this), and the newer Mac will read it just fine (but will not be able to boot from it, which is no surprise).

  • ITunes saying cannot read and write on iPod Touch 3rd gen 64Gb

    I just got an iPod Touch 64Gb and synched with my iTunes 9 on my MacBook Pro running Snow Leopard. Getting error message after about 6Gb into the synch saying that it cannot access read or write to the memory of the iPod.
    Went already at the Apple Store to show and exchange the iPod... total surprise, my new iPod does the same. Do I have something wrong with my iTunes 9 (already reinstalled once)? My old IPod 80Gb with hard disk does all the synch without problem...
    Any ideas?
    Thanks

    Found the issue: 2 corrupted music files in my iTunes library. iTunes does not say much about files it cannot read. Just stops the synchronization but not tracking of error further than that!! If it happens, keep working in finding out which piece of music is being copied when the error occurs then try to read it. I downloaded a new version from my TC and all is right now!!

  • IPod qith no serial? cant read or write??

    hello well mi ipod is 5g and i have a problem sometimes when i plug it to itunes (sometimes) itunes shows me an ipod withe with no serial and doesnt match the colour of my ipod and doesnt shows my music and when i plug ipod it sync but i put more music to itunes and then i put sync again and says: the ipod seba cannt be written or readed.
    i have been restoring my ipod like 5 times this week and i dont know what to do. i think i should send to repair.
    if you can help my i will thank you .

    Have you had a chance to look at this troubleshooting page? It may be of some help: "Disk cannot be read from or written to" when syncing iPod

  • "unable to read or write to disk.."?

    when i connect my ipod to my computer to put songs onto it, it acts like it is working and then a window pops up that says something about not being able to read or write to the disk. i've upgraded the software and reset my ipod, but still nothing.. plus now my ipod is completely empty.. and i've had it for over a year so the warranty is expired..

    Does the message indicate any sort of "data error?" I don't remember how the Mac represents a data error, but my best guess is, sadly, a faulty hard drive. The Mini's hard drive is a tiny 1-inch Microdrive, which can be rather fragile especially if it's knocked around while it's spinning. You might try a disk utility that can perform a surface scan of th drive to see if this is the case; if it is, there's really no choice but to send it in for repair or get a buddy who's REALLY handy to put a new drive in. (mind you, it's NOT EASY!)

Maybe you are looking for

  • Return PO with delivery  (Movment type 161)

    Hi Guys, I created a Return PO (the Return indicator is checked in the PO) for an inventory Material. No Comfirmation Key is maintained, I tried VL10B and saw this PO appears there.Created an outbound delivery , Pick TO and Did PGI ( Generated a Mate

  • Will connect to router but not internet!!!

    If there is anything I absolutely detest about Apple, it's the fact that their wifi *****. I have never had problems with my PowerPC iMac, but my two intels, a macbook and my newest, a macbook pro, have ALWAYS had connection problems. One of the prob

  • Frustrated and seeking help with a custom sort order...

    I created a family photo album and arranged all of the pictures in a specific order and sync'd them with my iPad, unfortunately the pictures do not stay in the custom sequence. I tried Batch renaming with a Custom Name and Index, but the renaming is

  • Case Statement Help needed

    case when datepart(mm,[SDate]) between '9' and '11' and datepart(mm,[PDate] ) between '9' and '11' Then 'Q1_' when datepart(mm,[SDate]) between '12' and '02' and datepart(mm,[PDate] ) between '12' and '02' Then 'Q2_' when datepart(mm,[SDate]) between

  • Schema name required in scripts

    The oracle instance we are running requires the schema name in front of all db objects when running scripts. If I am logged into this schema, I shouldn't need to include it in the scripts. Can someone tell me how to disable this requirement?