I tunes says files are missing, have deleated and reload still same

I tunes will not work since loading firefox, it said files were missing, so I re-installed, still did not work, deleated firefox but that did not cure it

I tunes will not work since loading firefox, it said files were missing, so I re-installed, still did not work, deleated firefox but that did not cure it

Similar Messages

  • ITunes won't launch after upgrade - says files are missing

    I had trouble upgrading to version 6 but disabled my anti virus software (McAfee) and the upgrade seemed to run OK. After restarting my computer iTunes won't run as it says files are missing and I need to install them. It was all working fine before. I have over 4200 tracks and I'm worried I've lost them although they are all still on my iPod. What do I do next? Please help.

    Sorted! Panic over. I ran the download again and everythin seems OK.

  • When opening says files are missing

    Have just reinstalled itunes and when I try to open the application it says that thereare files missing. My wuestion is what files. I had a previous problem with missing and msi file. Now I'm not sure what is wrong. Have uninstalled and reinstalled several times.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Can't figure out why FPGA code won't compile, says files are missing

    Hey guys, I get the following error, sorry for the big vomit of error code. As near as I can tell from reading that, it thinks a number of the files it requires to run some of the subvi's I'm calling are missing. I don't understand how to fix this when these are LabView native files, for example, the high-throughput rectangular to polar converter?
    Help much appreciated.
    Error code follows:
    Error 7 occurred at Open VI Reference in nirviOpenVIRefByNameOrPath.vi->niFpgaRemapObjsAndListIfUnderXNode.vi->niFpgaRemapObjsHandleXNodeSubErrors.vi->nirviMassageErrorList.vi->nirviParseAndMassageErrors.vi->nirviReloadErrorList.vi->nirviGenerateErrors.vi
    Possible reason(s):
    LabVIEW:  File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
    =========================
    NI-488:  Nonexistent GPIB interface.
    VI Path:
    All text parsed:
    <CodeGenErr>
    <ErrorCode>-61160</ErrorCode>
    <DynamicText><TreeLineInfo><LineInfo><DiagramObject><VIPath>C:\NIFPGA2009\clntTmp\FPGAImagi~2C_FPGATarg~A7_2Tap8bit~6A_nagEfsCz~08\MungedForFPGA\NI.Munge.2 Tap 8 bit RT Image Processing Initial.vi_FPGACompileCopy00000001.vi</VIPath>
    <UID>5485</UID>
    <ObjectName>High Throughput Rectangular To Polar</ObjectName>
    </DiagramObject>
    </LineInfo>
    </TreeLineInfo>
    </DynamicText>
    </CodeGenErr>
    <CodeGenErr>
    <ErrorCode>-61101</ErrorCode>
    <DynamicText><TreeLineInfo><TreeInfo><TreeID>1</TreeID>
    </TreeInfo>
    <LineInfo><DiagramObject><VIPath>C:\NIFPGA2009\clntTmp\FPGAImagi~2C_FPGATarg~A7_2Tap8bit~6A_nagEfsCz~08\MungedForFPGA\NI.Munge.2 Tap 8 bit RT Image Processing Initial.vi_FPGACompileCopy00000001.vi</VIPath>
    <UID>5036</UID>
    <ObjectName>SubVI: &apos;Butterworth Filter&apos;</ObjectName>
    </DiagramObject>
    </LineInfo>
    </TreeLineInfo>
    </DynamicText>
    </CodeGenErr>
    <CodeGenErr>
    <ErrorCode>-61101</ErrorCode>
    <DynamicText><TreeLineInfo><TreeInfo><TreeID>1</TreeID>
    </TreeInfo>
    <LineInfo><DiagramObject><VIPath>C:\Program Files\National Instruments\LabVIEW 2009\vi.lib\rvi\Analysis\utilities\niFPGA I32xI32 Dot Product - 3 elements I64.vi</VIPath>
    <UID>63</UID>
    <ObjectName>Timed Loop</ObjectName>
    </DiagramObject>
    </LineInfo>
    </TreeLineInfo>
    </DynamicText>
    </CodeGenErr>
    <CodeGenErr>
    <ErrorCode>-61101</ErrorCode>
    <DynamicText><TreeLineInfo><TreeInfo><TreeID>1</TreeID>
    </TreeInfo>
    <LineInfo><DiagramObject><VIPath>C:\NIFPGA2009\clntTmp\FPGAImagi~2C_FPGATarg~A7_2Tap8bit~6A_nagEfsCz~08\MungedForFPGA\NI.Munge.2 Tap 8 bit RT Image Processing Initial.vi_FPGACompileCopy00000001.vi</VIPath>
    <UID>5036</UID>
    <ObjectName>SubVI: &apos;Butterworth Filter&apos;</ObjectName>
    </DiagramObject>
    </LineInfo>
    </TreeLineInfo>
    </DynamicText>
    </CodeGenErr>
    <CodeGenErr>
    <ErrorCode>-61101</ErrorCode>
    <DynamicText><TreeLineInfo><TreeInfo><TreeID>1</TreeID>
    </TreeInfo>
    <LineInfo><DiagramObject><VIPath>C:\NIFPGA2009\clntTmp\FPGAImagi~2C_FPGATarg~A7_2Tap8bit~6A_nagEfsCz~08\MungedForFPGA\NI.Munge.2 Tap 8 bit RT Image Processing Initial.vi_FPGACompileCopy00000001.vi</VIPath>
    <UID>5036</UID>
    <ObjectName>SubVI: &apos;Butterworth Filter&apos;</ObjectName>
    </DiagramObject>
    </LineInfo>
    </TreeLineInfo>
    </DynamicText>
    </CodeGenErr>

    GotRobotFriends,
    Hello! First of all, can I get the following information from you? 
    1.) LabVIEW and LabVIEW FPGA Versions
    2.) FPGA Target you are trying to compile code for.
    Typically errors 61101 and 61160 are thrown when a Single Cycle Timed Loop (SCTL) has elements within it that won't allow it to finish it's execution in 1 clock cycle.
    Looking through the error codes below, do you have any of the following items in a Single Cycle Timed Loop?
    High Throughput Rectangular To Polar 
    Butterworth Filter
    Also, are you using xnodes? Problems have been seen when items that would normally return an error when placed in a SCTL do not return errors if they are used with xnodes.
    Ben Sisney
    FlexRIO V&V Engineer
    National Instruments

  • When i ran itunes latest update i got a virus from it and now itunes will not open as it says files are missing. i was able to get rid of the virus.

    When I ran an itunes update yesterday it downloaded a virus with it. Was able to remove the virus but itunes will not run now as it says certain files are misssing. What do I do now?

    Where did you download the update from?
    You may have to uninstall iTunes and re-install it from apple.com/itunes
    Here is the article for uninstalling iTunes for Windows XP:  http://support.apple.com/kb/ht1925
    And the article for Windows Vista/7: http://support.apple.com/kb/ht1923

  • How do i reload elements 9 when it says files are missing

    it tel me to reload but all the disc does is try to remove it and says i do not have right aurthrity

    What OS are you on? If on Mac, go to //Applications/Utilities/Adobe Installers/Uninstall Adobe Photoshop Elements 9. On Windows XP, go to Control Panel > Add/Remove Programs and find Photoshop Elements 9 on the list. If on Windows Vista/7, go to Control Panel > Programs and Features and find Photoshop Elements 9 on the list.
    Once you have uninstalled the software, reinstall using the disk.
    If you are getting errors about authority, this would have to do with the user account you are currently logged in as. Make sure you are logged into an account that has full administrative privileges.

  • HT201077 hi my itunes wont open itunes store and my icloud uploads some then stops . i have deleated and reloaded both and still the same i am using a pc on windows 8

    I am using windows 8.1 my itunes close down if i try and go into the itunes store. my icloud works for about 5 minnutes then stops. i have deleated itunes and cloud and reloaded both and they still fail.

    Check these tips:
    iOS: Device not recognized in iTunes for Windows

  • I have had itunes for years on my computer now it says it cant open itunes cause files are missing so i went to repair same thing so i went to download itunes and it want me to pay for it, is it no longer free

    i have had itunes for years when i try to open it, it says i have missing files so i repaired it, then it said the same thing. so i went to download it again to fix the problem and it wants me to pay for a membership. is itunes no longer free?

    iTunes is free... there is no membership fee.
    Try providing some specifics about what is going on and others might be able to provide a resolution.

  • ITunes won't open, says files are missing. reinstall?

    I've been using iTunes for a couple years now today I can't open it. A message keeps popping up saying I need to reinstall iTunes due to files missing. Is there a way to do a "repair install" What do I need to do to not loose all of my music.

    You should not loose any music if iTunes was maintained properly.
    In most cases it is so no need for concern. But to verify.
    Go to My documents - My Music - iTunes - iTunes Music - Inside this folder you should see all your music, videos, podcasts, etc.
    If you get the chance right click on iTunes Music folder, select properties. This will show you the file size. The file size should be pretty big depending on how much music you had.

  • Downloaded Itunes to Windows 8. When opening Itunes error message 'Apple Application Support is required to run ITunes. Please uninstall Itunes, then install ITunes again.' I have uninstalled and reinstalled still same error received.

    I downloaded ITunes onto my computer with Windows 8. Each time I try to open it I get the same error of "Apple Application Support was not found. Apple Application Support is reuired to run iTues. Please uninstall ITunes, then install ITunes again. Error 2 (Windows error 2)". I have tried uninstalling it and reinstalling it multiple times and continue to get the same error. I am unsure of how to fix this.

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Tried to delete an FM book, but won't delete; however files are missing

    I'm using RH7 in TCS1 in Windows Explorer.
    I imported FM book files by reference into my project. I had forgotten to check abook file prior to import and didn't notice that the book file did not have the necessary graphics.  So I fixed the file, then tried to update the book file in RH7.  The graphics did not import into RH, so I thought I would start over from scratch and delete the book file in RH.  It will not delete and causes RH to crash.  The delete option is available, but it doesn't delete them.
    So I went into Windows Explorer and deleted the files from there.  Then I get a message that says files are missing, and that I need to delete them from Project Manager which is what I was trying to do in the first place.
    Can someone please help me delete these files?

    Just an update to this posting.  I did not have the latest RoboHelp patches installed.  For some reason, RH wouldn't let me install
    them.  So I had to have a complete uninstall of RH, then reinstall it.  Once I did
    that I installed all of the patches and my book files were deleted.
    Case closed

  • AAC/MP4 track saying they are missing

    I've just reinstalled Windows and iTunes (latest version), I've also coped over my iTunes library so I can keep everything the same and all my playlists etc
    I've done this loads of times before (I normally re-install Windows every 3 months) and not had problems
    this time though, all my AAC/MP4 tracks say they are missing in iTunes and I have to manually find each one individually even though they are where they are supposed to be. It's also done the same for a few music videos
    All my other music videos and all my MP3's are fine
    anyone got any ideas?

    http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=%22offline+or+missing%22

  • I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system som

    I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system some how. How can I retrieve these images? Is there a re boot for lightroom? Need help ASAP!

    You have probably moved the files outside of Lightroom. The images you see in LR are previews that were made before you moved the files.
    Do a search for the files/folders using your computers operating system. (Explorer/Finder)
    Once you have found them, you can point LR to the right location.

  • "I am constantly getting a message which says Itunes cannot run because some of it's required files are missing.  Please reinstall iTunes."  I've reinstalled a number of times and re-booted but it only seems to last a short time.  How do I fix it?

    I am constantly getting a message which says "iTunes cannot run because some of it's required files are missing.  Please reinstall iTunes."  I've reinstalled a number of times and re-booted but it only seems to last a short time.  How do I fix it?

    HI daddio,
    Ok some things first I need to know...Did you use Microsoft cleanup utility to clean up all those uninstalls you have done?
    I hate Norton and anyone who reads my posts will know that. I have seen way too many infected PC's by Norton users. Did you try the EWIDO and AdAware scan? I see you said you read lots of posts. That is helping folks remove the malware in order to get iTunes and quicktime back to health.

  • Windows XP i-Tunes wont open.Message comes up "i-Tunes cannot run because some of its required files are missing.Please reinstall i-Tunes. Tried reinstalling but quits midway thru installation

    I have Windows XP & until recently i-Tunes was working fine.Now when I try to open I get this message "i-Tunes cannot run because some of its required files are missing. Please reinstall i-Tunes. So I did. Midway thru ,installation stops & same message is repeated. So I uninstalled i-Tunes, Downloaded new one,went thru installation process for the same result & same message. Have tried procedure 4 times,resulting in same result each time. HELP!!!!!!!!!!!!!!!

    I did try to uninstall and reinstall.  It messed up my computer.  I had to "RESTORE" from the prior days backup.  This was not helpful at all.  I'm used to losing all my stuff when I connect to iTunes, that's a whole other issue, but now I'm completely banned from any updates to my phone at all.  Geeze.......

Maybe you are looking for