I tunes says my 5th generation is corrupt
Itunes said my5th gen nano was corrupt, and I would need to restore it. I held off awhile as My ipod was still fully functional, it just couldnt sync to itunes. I finally decided to restore my nano, now it wont work at all, after restoring it, an image appears on the nano, to restore using itunes, then goes into disk mode. I have tried many times to restore it, and tried many of the solutions I have found online with no luck. I dont believe its an issue with the hardware as it was working great and nothing was done to cause it to malfunction.
Any advice would be greatly appreciated.
commodore128 wrote:
If this is the original iPhone, you can unlock it via the IMEI with a third party service or with AT&T.
Unless the poster lives in one of those little places outside the US....
Similar Messages
-
Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked. I have tried on a windows and a mac and noticed no change. I have tried restoring to a backup but that didn't help. I haven't had time to do a full restore but I will try if the problem persists.
An "other" larger than about 1 1/2 GB indicates corrupted files.
What is the Other on my iPhone and How to Remove It
What is "Other" and What Can I Do About It?
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software -
My second iPod is a 5th generation and when I try to buy something it says it needs make sure I am who I say I am and it makes me answer security questions. But the problem is I don't know the answers to them. I did not choose them. And if I can't find an answer I can't buy anything!!! Help!!!!
You need to log in to your Apple ID and change you security questions. Take a look at this link, http://www.apple.com/support/appleid/
-
On my iPod touch (5th generation) it won't let me watch any video's off any Internet sources eg Facebook twitter and YouTube. When I click on the video it just comes up saying 'this operation could not be continued'?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I have an ipod touch 5th generation 64g . Just bought a new laptop and authorised it to use itunes library. When i try and sync my ipod it says it can't do it because there isn't enough space on my ipod to hold everything in the itunes library. I already know that i can't fit everything on my ipod but when using my old laptop i was able to choose what i wanted to sync. Now i don't seem to have the option of choosing what i can sync, it just refuses to do it as there isn't enough space. Why is this???
Hello, peppertwist.
Thank you for visiting Apple Support Communities.
When receiving the not enough space alert, he is the best article to go through.
iOS: "Not enough free space" alert when trying to sync
http://support.apple.com/kb/ts1503
Cheers,
Jason H. -
My iPod Touch 5th generation says disabled connect to itunes but when we connect to itunes it says on itunes that the ipod is locked with a passcode and to go onto the ipod and type in the passcode to proceed but the ipod is still locked. what do i do?
http://support.apple.com/kb/HT1212
-
I have a 5th generation IPod Nano that I have registered to my ITunes account. I recently bought my daughter a 7th generation IPod Nano and have attempted to sync this new IPod to my ITunes account. A message continues to appear saying that it does not recognize the (new) device... Any suggestions ??
How to use your iPod to move your music to a new computer
-
What is the provisioning feature in the settings under, general>profile? It says something about "provisioning". What does that mean and what does it do?? (It's on my 5th generation iPod touch, black, iOS 6.1.3
A profile is used on iOS device to add specific settings and similar things to an iOS device. Tryically, they are added when the iOS devices is controlled by a company or school.
However, some apps install a profile. If your iPod is not controlled by a company or school then it seems an app added the profile. You can good the title if the profile and see if that gives any info. -
I have an iPod Classic. I think it is a 5th generation. I would like to know if I can download games from the App store that say they are for iPads, iPhones, and iPod Touch. Will these work on my iPod Classic?
No, they won't.
(58155) -
My iPod touch 5th generation says: iPod is disabled, connect to iTunes. When I try to connect to iTunes it says: cannot connect, please put pass code in iPod... Please help!!!!
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
hello, i have lost my ipod (5th generation) and i have tried to use ' find my iphone' but it says my ipod is offline so i think its dead....what should i do?
No app is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have to iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Bought lots of music last night. Tried to sync my 5th generation nano.It's been saying something like, "step two, attempting to sync a***'s ipod for about 8 hours. It won't let me stop it. I can't disconnect at this time. Please help.I thought about using control. alt delete and stopping it. It says I will lose any unsaved data. The music appears to be in my library, so I should be safe, right? However even if that works and I can disconnect my ipod, why isn't it syncing? I have a 2nd one to sync as well. I am frustrated. Thank you!
Thanks you for replying planb77! My husband got home and told me to just disconnect the ipod. It had been at least 12 hours by then, The music was in my library but not on my ipod, He had me shut down, unplug my computer, take a rest from it and restart. I reset my ipod following instructions on the itunes site. I tried syncing again and was successful syncing both ipods. I really think it was great of you to take the time to help someone else.
-
I have a 5th generation iPod nano. I downloaded an audiobook on Itunes. It will not let me sync saying this computer is not authorized. Anyone know what to do?
Move the cursor to the very top of the computer's screen, click on Store in the menu bar, and choose Authorize this Computer.
(119441) -
I just received a iPod Touch 5th generation for xmas and it acts like it is locked, when you slide the slider it says unlock button and nothing happens. Can't slide the power off either. It tells you the time, unlock button, power off button but nothing happens. Voice just tells you the unlock button, time, poweroff button.
Please help also itunes says I need to enter on iPod the passcode to reset to factory. I can't get it open to enter passcode, slider doesn't work. It is one day old and this happen xmas afternoon. PLEASE Help someoneTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I Am having a problem with syncing 5,000+ songs onto my IPod 5th Generation. Everytime I sync, some songs will either go away or ALL of them will come off my iPod. I have iTunes 12 for Windows, and it has a slow syncing process and it will take days for songs to get on the iPod. It will even say that any of the songs "we're not synced to my iPod because the file wasn't converted..
I Need help please, I would appreciate it.Hey Bryce,
Welcome to Apple Support Communities.
It sounds like some songs aren’t being synced to your iPod touch because they aren’t in a compatible format. Can you play those tracks in iTunes? Try selecting the tracks that won’t sync and creating a new version of them with iTunes as shown in the article below.
iTunes 11 for Windows: Save a copy of a song in a new file format
Take care,
-Jason
Maybe you are looking for
-
Can't get Z_EASYDMS_SHOWPOPUP to work
Hi all, I'm working with a customer that uses EasyDMS. When changing s document to a certain status they would like a popup window to confirm this change. The badi DOCUMENT_MAIN01 is allready implemented and so is the function module Z_EASYDMS_SHOWPO
-
Match code result not copied in the transaction
Hi there, I had a request to check the following problem : in transaction VF02 (billing doc change), when finding a document through custom match code using the reference field, double clicking on the document in the result box does not copy the docu
-
Moment type in delivery based on PO
Hi Gurus, Please guide me that in the replenishment delivery based on PO, how the moment type is coming in to delivery document. Thanks & Regards, Savi
-
OIM - starting two process tasks simultaneously
Hello, I have a process definition with many process tasks. If a certain trigger/event happens (eg. Change Last Name) I want to run two particular process tasks. How do I achieve this? My guess was to use the option to generate new tasks based on the
-
How to uninstall lion 10.7.4
how to uninstall lion 10.7.4