I-Tunes Store VIDEOS TOO LARGE

Is it true that the new LOST episodes are much larger than the once from previous seasons-is there a way to choose between quality?
The downloads take far too long...

Yes, they are larger, no, you cannot choose the size/quality.
They are all 640x480.

Similar Messages

Exported video too large, quality poor

Hey guys. I'm starting with a 1440x1080 mts video, trimming it down (total trimmed length is about 7 minutes) and exporting it to a 1440x1080 mp4.
But sadly, I have to increase the bitrate very high in order to get quality that approaches the original, resulting in a much larger file size. I managed to get the size of the exported video (shown in the table below) to a reasonable size, but it was still lower quality than the original.. Can I get some help here? Essentially, I just want to export the video with the original resolution and around the same size but in something like .mp4 format.
PowerDirector11 achieved this with no fuss.
Starting File Info:
General
ID                                       : 0 (0x0)
Format                                   : BDAV
Format/Info                              : Blu-ray Video
File size                                : 287 MiB
Duration                                 : 7mn 22s
Overall bit rate mode                    : Variable
Overall bit rate                         : 5 439 Kbps
Maximum Overall bit rate                 : 13.7 Mbps
Video
ID                                       : 4113 (0x1011)
Menu ID                                  : 1 (0x1)
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 2 frames
Format settings, GOP                     : M=3, N=15
Codec ID                                 : 27
Duration                                 : 7mn 22s
Bit rate mode                            : Variable
Bit rate                                 : 4 959 Kbps
Maximum bit rate                         : 12.0 Mbps
Width                                    : 1 440 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 29.970 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Interlaced
Scan order                               : Top Field First
Bits/(Pixel*Frame)                       : 0.106
Stream size                              : 261 MiB (91%)
Audio
ID                                       : 4352 (0x1100)
Menu ID                                  : 1 (0x1)
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 129
Duration                                 : 7mn 22s
Bit rate mode                            : Constant
Bit rate                                 : 256 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Compression mode                         : Lossy
Delay relative to video                  : -67ms
Stream size                              : 13.5 MiB (5%)
Ending File Info:
General
Format                                   : MPEG-4
Format profile                           : Base Media / Version 2
Codec ID                                 : mp42
File size                                : 632 MiB
Duration                                 : 7mn 12s
Overall bit rate mode                    : Variable
Overall bit rate                         : 12.2 Mbps
Encoded date                             : UTC 2013-05-24 22:15:10
Tagged date                              : UTC 2013-05-24 22:15:10
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 3 frames
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 7mn 12s
Bit rate                                 : 12.0 Mbps
Width                                    : 1 440 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 4:3
Original display aspect ratio            : 16:9
Frame rate mode                          : Constant
Frame rate                               : 29.970 fps
Standard                                 : NTSC
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.257
Stream size                              : 619 MiB (98%)
Language                                 : English
Encoded date                             : UTC 2013-05-24 22:15:10
Tagged date                              : UTC 2013-05-24 22:15:10
Audio
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : 40
Duration                                 : 7mn 12s
Source duration                          : 7mn 13s
Bit rate mode                            : Variable
Bit rate                                 : 253 Kbps
Maximum bit rate                         : 320 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 KHz
Compression mode                         : Lossy
Stream size                              : 13.1 MiB (2%)
Source stream size                       : 13.1 MiB (2%)
Language                                 : English
Encoded date                             : UTC 2013-05-24 22:15:10
Tagged date                              : UTC 2013-05-24 22:15:10

clanderson00
The answers are in the details. But, from what you offered above, whether you have Premiere Elements 10 or 11 Windows, here is what I am suggesting that you try.
Import your 1440 x 1080 HD anamorphic 16:9 @ 29.97 interlaced frames per second into Premiere Elements, using the project preset of:
NTSC AVCHD HD1080i30.
If you are using version 10, you do that in the new project dialog yourself.
If you are using version 11, the program is supposed to do that setting automatically based on your first drag of the clip to the Timeline. Check Edit Menu/Projects Settings to make sure that the program has recognized your video properties correctly and assigned the appropriate project preset. If not, open a new project and go to File Menu/New/Project and set the project preset yourself, making sure to put a check mark next to Force Selected Project Settings on This Project. After OK'ing out of there, then bring in your video via Add Media/Project Assets/drag to Timeline.
When you get around to exporting, give the following a try (in looks like that was the area that you were exploring already)
If version 10, Share/Computer/AVCHD
If version 11, Publish+Share/Computer/AVCHD
use the preset = MP4-H264 1920 x 1080p30
That preset uses default bitrates of Target 32 Mbps and Maximum 40 Mbps. Go with that to get a baseline for your video which appears to have an overall bitrate of about 12 or lower Mbps. If necessary, redo, Lowering for file size requirements.
Then let us know what that looks like.
Can you shoot at 1920 x 1080 at a higher bitrate with your camera? And does your camera shoot progressive as well as interlaced video?
Thanks.
ATR

How can i add videos,movies and tv shows episodes to my ipod nano?I want to know whether i can directly add them through my pc or not without downloading them from i tunes store?

how can i add videos,movies and tv shows episodes to my ipod nano?I want to know whether i can directly add them through my pc or not without downloading them from i tunes store?

Yes, you can add your own videos to iTunes, then sync them to your nano, subject to supported max resolution limit and file type. The specs for the 7th gen nano says (I don't know which nano model you have), Video Format Support
"H.264 video: 720 by 576 pixels, 30 frames per second; Baseline, Main, and High-Profile level 3.0 with AAC-LC audio up to 256 Kbps; 48kHz; stereo audio in .m4v, .mp4, and .mov file formats
MPEG-4 video: up to 2.5 Mbps, 720 by 576 pixels, 30 frames per second; Simple Profile with AAC-LC audio up to 256 Kbps; 48kHz; stereo audio in .m4v, .mp4, and .mov file formats"
http://www.apple.com/ipod-nano/specs.html
(earlier nanos have lower max resolution limits)
So, "HD" video is too high resolution, so iTunes will not sync such videos to the iPod (although they play in iTunes). If you are asking how to set up iTunes to sync videos in general (regardless of source), please post back.

I am having trouble with a video. I have tried to copy it to a flash drive because it is too big to fit on a DVD, it says it is too large for the volumes format. Please advise.

I have done many DVD's for seniors for graduation so I am familier with Imovie. I have just finished a projec that is a combination of video, music and stills. I shared it through idvd. Now I can't burn it to a dvd because it is too large. It is too big even for a two sided disk. I have researched it and i find that blue ray would be big enough. Does apple offer blue ray burner? if so, what is the cost? I tried another route and took my external hard drive to copy it to a PC. there computer wouldn't recongize my drive. I am assuming it is because it is formated for apple. I tired copying it to a flash drive and and it says that it can't be copied because it is too large for the volume's format. Suggestions? PLEASE!!!!!

Could the video be too big because of using too high a resolution? 480p is sufficient for a DVD. the thread at:
https://discussions.apple.com/thread/5868958?tstart=30
may be of help.
Apple does not support Blue ray - you have to use a thrid party application like Toast.
To transfer the video to a PC you need a FAT-formatted hard drive (or of course a sufficiently big memory stick).
You could also go via a network, via the cloud (eg Dropbox) or with 'Wetransfer" or similar.
Geoff.

Hi. I purchased Adobe Acrobat Xi Pro from a store (card). I submitted the number (under the scratch area on the card) on the adobe website, with my personal details etc. When I submitted the form, I got an error message: 413 header length too large (a

Hi. I purchased Adobe Acrobat Xi Pro from a store (card). I submitted the number (under the scratch area on the card) on the adobe website, with my personal details etc. When I submitted the form, I got an error message: 413 header length too large (and on top the page reads JRun Servelet Error). What does this mean? What should I do next?

Hi. I purchased Adobe Acrobat Xi Pro from a store (card). I submitted the number (under the scratch area on the card) on the adobe website, with my personal details etc. When I submitted the form, I got an error message: 413 header length too large (and on top the page reads JRun Servelet Error). What does this mean? What should I do next?

Why can't I import anything? "File video dimensions (width/height) too large"

New to PP CS4 here (that will be obvious momentarily...). I can't seem to import any footage into any project (well, at least none of the bits I've tried, and I don't think there's anything 'wrong' with them). Every time I attempt to do so, I get the error:
Dialog title: File Import Failure
Error Message: File video dimensions (width/height) too large.
This occurs with every files I've thrown at it - admittedly, they all have a lot in common, but they're not particularly exotic.
The files are (mostly) AVI files (I know, I know...before I get jumped, I understand it's just a wrapper, etc.). The files come from two cameras:
1. A Sony DCR-TRV20. Opening up the AVI in QuickTime Player, I see it's listed as "DV/DVCPRO - NTSC 640X480"
2. Canon PowerShot A620. Opening up the AVI in QuickTime Player, I see it's listed as "MotionJPEG OpenDML 320x240"
3. I somehow managed to get the AME to spit out a FLV file. That failed to import with the same error message, too.
I tried running these files through AME, and got the same results (although never having used AME previously, I have a question on that, below).
New project, settings are all (I think) the defaults: Preset DV-NTSC/Standard 32kHz
New installation of PP CS4, with the 4.1 update, on a PC running Vista 32 with all the endless MS updates applied.
Related question: I've skimmed other threads here, and noted the advice to "always convert any non-standard footage to DV-AVI Type II" before importing....however, I see no such option for that output format in AME....only generic things like "Microsoft AVI" and "Uncompressed Microsoft AVI".
Codec issues? I'm a little skeptical, since these AVI files play just fine in Windows if I double-click them. Does that not suggest that there's a codec there for them? The files are from (what I believe to be) garden-variety consumer cameras (these devices are a bit old and certainly not high-end, but they're hardly exotic formats, I think). The files are small, short clips I'm attempting to use just to learn Premiere, but it gags on every one of them, every time.
PP is so insistent that every file I throw at it has improper dimensions, but these files appear to be perfectly reasonably sized, and I assume it's operator error (I'm withholding judgement on the quality and accuracy of the error string it's presenting me). But I'm not sure where to look for the right knob to twist. Pretty frustrating to be stuck on Square 1 (actually, Square Zero).
Can someone point me in the right direction?
Please be gentle, it's my first time....

Thanks, but....mmmm....maybe not.
I've tried multiple settings for New Projects. Just created a new one using the preset for DV-NTSC/Widecsreen 48kHz (frame size 720 x 480, 48 kHz audio). Exactly the same results.
You say "To point you in a certain direction, DV from a TRV is 720x480, not 640x480." However, according to QuickTime's Movie Inspector panel, the file is 640x480. This clip was captured through Premiere - that wouldn't change its aspect ratio, would it?
The files from the Canon still camera are AVI files, not still images (so I don't see how the reference to Photoshop applies, or perhaps I misunderstood your point). They are 320x240, according to QuickTime's Movie Inspector panel. If they're 320x240, wouldn't that be the same aspect ratio as 640x480? Attempting to import them, I get the same error....
While not exactly Hollywood quality, I just need files to play with as I attempt to learn the program, and it's not clear to me why these files should not work - other than the fact that NO files seem to work. Also, I'm not sure what your reference to "exporting" pertains to - I can't get anything imported, I'm not trying to export anything that (I'm aware of) - I'll worry about exporting once I've managed to get something, ANYTHING to import.
I've got some PP training videos (from "you-probably-know-who.com"). Following along using their project files and their video assets (MOV files in this case), I still get the exact same error.
So to summarize, so far, I've seen no evidence that this copy of PP can import ANY video file.
While I'm sure I would benefit from spending more time with the fine manual, I think there's something wrong here that's not going to be addressed in the introductory documentation. If I can't import any footage into any project, progress is going to be slow.
How about this: is there some known-to-be-good test file I can grab and try importing that? I've got very strong suspicions that I'll get the same error message.
Thanks again.

It says video is too large on iPhone to be send to iCloud

When I tried to send a video clip taken on iPhone (duration - 13 min) to iCloud a notification appeared that the video was too large and I need to crop it. I clicked OK and then an upper line got out showing all the length frame by frame with a yellow marker supposed to be used as a cropping tool. When I started manipulating the tool all things got freezed and I had no chose but to press Main Menu button to recover it. Checking it concerning whether the video was too large I then got to Storage Manager and it estimated at 4.1 GB of unused space of 5 GB allowed free iCloud storage. So what's the trouble, why it all freezed and why it said "too large" for video?

Shared streams don't use your iCloud storage so it doesn't matter how much space you have. Because the storage for shared streams is free, there are limits on what can be included (see http://support.apple.com/kb/HT4858). For videos, the maximum length is 5 min.

Video Sharing - Videos upload issue to Vimeo because files are now too large post iOS7.

Videos taken prior to iOS7 update uploaded without issues to Vimeo. Vidoes taken after iOS7 update will not upload because videos are too large. I am videoing the same type of activities for the same duration post iOS7 as I was pre-iOS7. What has changed with iOS7 that is causing my videos to be saved as larger files? This is a HUGE issue for what I do! HELP PLEASE!!

You're going to have to edit them on a computer before uploading them, unless you can convince Vimeo to change their limits.

Premiere Pro CC 2014 Video is too LARGE

Hi all,
Just getting started with Premiere Pro CC 2014. I've imported a short clip to practice on, and the first thing I noticed is that the output video is too large for the screen:
Is there a way to fix this?
I don't know if this is related or not, but I also keep getting this:
It says the minimum screen resolution required is 1024 x 768. My screen resolution is 1366 x 768. Isn't that large enough?
Any help would be great - thanks!!

I think I've figured out the scaling issue. Any ideas on the screen resolution would be awesome.

HT1751 ;I rented a music/comedy video and watched about 1/2 of it that night. The next day i tried to finish the video but the itunes store wanted to charge me again. I still had 2 hours left on the 24 hour rental. Whats up I tunes store?

;I rented a music/comedy video and watched about 1/2 of it that night. The next day i tried to finish the video but the itunes store wanted to charge me again. I still had 2 hours left on the 24 hour rental. Whats up I tunes store?

Same issue. Free movie rental from Starbucks....."happy"

File video dimensions (width/height) too large

I cannot impoty any file of any type into my time line. I was having some issues with crashing, ended up upgrading my OS to snow leopard, and then reinstalling all my adobe products. Now all of my media is showing up as off line, when i try to relink anything, jpg, psd, ai, and all video files, i get the error "File video dimensions (width/height) too large". I really do not want to start over and re edit everything I have ever done, and i am not even sure i can do that at this point, as it also happens when i try to create a new file.
does anyone have any other fixes? Please Help, I am going insane.
I have CS4 Production Premium.
OS Snow Leopard.
Mac Pro, 8 core.

Hi,
What kind of video files are you working with ?
I did a google search using ---- file video dimensions ( width/height 0 too large --- and most of the info I looked at in the search results is about files ( still images mostly ) that are larger than 4000 x 4000 px.. which is a limit for the NLE....but some results were about using cineform codec and matrox graphic card and some stuff about nero and so on....so I would guess the more info you can give about what you have and have done the better...
Rod

File video dimensions (width/height) too large, importing AVI

I'm testing Windows 7RC and Adobe Production Premium CS4. Both CS4 and Windows are fully updated with all updates available through today. Premiere Pro CS4 is at 4.1.0.
I have hundreds and hundreds of AVI files captured from tape and from memory cards created by the capture process in Adobe Premiere Pro 1.5.1. if I create a new project, HDV 1080i (60i) and try to import my AVI files I get the error message about 'file video dimensions (width/height) too large'. These files were created with the Cineform HD codec that came with 1.5.1. I have the CFHD codec "CineForm 10-bit-visually Perfect HD" loaded on this computer, and G-spot verifies that and can render and play the avi files. Since these are from HDV their actual dimensions are 1440x1080. I've also tried to import standard def AVI files with the same result.
I just picked a few random projects to attempt to open, and none of them will open. Not SD not HDV. I get the 'too large' message.
Suggestions?
Hawkeye

Throwing out wild guess here, but I think things changed with the way Premiere handled HDV with 2.0, at which point it went 'native' - meaning it no longer uses the Cineform codec. I wonder if it's possible the two versions just don't mix, despite the Cineform codec being installed.

How handle Add Media Failure Error: File Video Dimensions (Width/Height) Too Large?

I am a brand new user of Premiere Elements. I am using it for stop gap animation, bringing in digital still photos from my Nikon D3200. I just attempted to bring in the first set of photos from the SD card. I'm running Windows 7. After loading the photos, an "Add Media Failure" box came up with the message "Error: File Video Dimensions (width/height) too large". Is something wrong with the width and height of the photos and if so what do I need to do to make it work? There were 763 photos, but the message seems to refer to the height/width of each photo and not the total file size so to speak - right? During the import process, the program prompted us to bring the photos in as images and not as videos -- so that is what we selected. Thank you for any assistance.

Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935

"Error Message: File video dimensions (width/height) too large"

Hello,
I believe someone else had a similar problem and posted to this forum, but here it goes...
I have a project in Premiere CS3 that uses MPG files. The files open just fine in CS3 at work. At home I have CS4, but those MPG files do not import. I've tried converting the files to a MOV file but I just get the same result:
"Error Message: File video dimensions (width/height) too large"
I'm using Premiere CS4 version 4.1.0 on a Mac. My work computer is a PC.
I've tried running the file through MPEG Streamclip a couple times with different settings, but so far no luck. I realy have no idea what I'm doing there or what setting could work, but I've got another conversion cranking away now. We'll see how that goes.
Thanks

A handheld 4K camera with exchangeable lenses with 1" sensors, standard with a 20-600 mm equivalent zoom range, with extender, with a simple battery that lasts at least 12 hours, that records on $ 25 SD 128 GB cards, available at every streetcorner and does 4:4:4 color space uncompressed I-frame with a weight of less than 4 Lbs and with a dynamic range over 60 dB, all under $ 1 K?
Take out the prices and you've fairly accurately described the forthcoming Scarlet.
It also describes somewhat well AVC-I cameras.
But overall, I would not argue with your description as a goal to be achieved in 5 years. In the interim there would have to be compromises, of course. But there are three things that should never be compromised in any video camera anywhere - the imaging devices should always be full resolution, the recording format should always record the full raster, and only using I-frame compression.
This was the norm for standard definition. Only with HD have camera makers mucked things up. It's time they got back to basics and made proper cameras.

"file video dimensions (width/height) too large" is the exact message, what is the solution please?

Trying to make a slideshow in Prem Pro CS4 with full size D800 jpegs, but the message "file video dimensions (width/height) too large" appears
I have checked the FAQ and found that the res of the D800 at 7000x5000ish is well below the 25,000x25,000 Prem quotes,
Can anyone help please?
Thanks

4,096 X 4,096. See this:
http://help.adobe.com/en_US/PremierePro/4.0/WS92DAB4F5-E46F-46fb-B2D8-71813E6A3AE4a.html
The newer versions explained here:
http://blogs.adobe.com/premierepro/2010/07/maximum_dimensions_in_premiere.html

I-Tunes Store VIDEOS TOO LARGE

Similar Messages

Maybe you are looking for