I-Tunes update has corrupted system files

The latest version of i-tunes did not complete the installation process and now I am getting an error message "MSVCR80.dll missing from your computer" followed by "Error 7 (WindowsError 126). I cannot start i-Tunes. Tried to re-install but it will not complete the process. No i-Tunes or access to my library!

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Similar Messages

Windows 8 - Itunes update has corrupted itunes file and wont work! HELP!

Hello .. Im really hoping someone can give me some advice or help with this as I have been trying for hours to try and fix!
I have been using itunes on my computer with no problem at all..
Last night I down loaded a new version of Itunes [itunes64setup] - my itunes has since decided not to work and my computer now keeps restarting itself!
I have tried to uninstall itunes completley and I get various messages - basically it gets so far and then crashes advising that it cannot uninstall!!
I have windows 8 on this system and wondering if it is a compatability issue!!
Im totally at a loss - any help would be greatly appreciated!!

Then see if anything here works:
http://support.apple.com/kb/HT1808

Hello my question is why do i get a error message now that I have done alot of updating of my system it old, but I got it back up and running Itunes was working fine until in an update of the system files then Itunes can't burn the play lists to the

Hello
I recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time ..this has occurred several times on this sytem and and as well as other system this one has window vista 64 bit home prem. why is the itunes not working to burn my disks
it worked fine before the updates to the system and the itunes software is up dated as well...can someone suggest something
thanks for your time in this matter
sadeyesjlee

I recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time
The 2131 usually indicates firmware needs to be updated on a drive.
Head to your drivers and downloads page for your latitude at Dell, and check for updates to your firmware for your optical drives. If you're behind and you update, does that clear up the 2131?

16.0.4 Update has corrupted Illustrator

Just tried applying the latest 16.0.4 and it has corrupted Illustrator, which now crashes upon opening.
Error log is below, but if I try to run the updater again (it still shows up as an available update in Adobe Application Manager), I get the following error log:
Installation failed. Error Code: U44M1P7
How can this be fixed?
Complete Crash log:
Process:         Adobe Illustrator [828]
Path:            /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier:      com.adobe.illustrator
Version:         691 (16.0.4)
Code Type:       X86-64 (Native)
Parent Process: launchd [345]
Date/Time:       2013-01-24 09:49:34.844 -0800
OS Version:      Mac OS X 10.7.5 (11G63b)
Report Version: 9
Interval Since Last Report:          169177 sec
Crashes Since Last Report:           7
Per-App Crashes Since Last Report:   4
Anonymous UUID:                      48C1DF7D-0E42-49C7-882D-800A561FDE7E
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/AdobeCrashReporter.framework/Versions/A/AdobeCrashReporter
Referenced from: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Reason: image not found
Binary Images:
       0x100000000 -        0x101876fef +com.adobe.illustrator (691 - 16.0.4) <69AF39E9-A928-8769-94DE-AC579EB0FD84> /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
       0x101ab9000 -        0x1027feff7 +libicudata.40.0.dylib (40.0.0 - compatibility 40.0.0) <6211D655-ECF8-7378-CF68-3B07300D5A29> /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Frameworks/ICUData.framework/Versions/4.0/libicudata.40.0.dylib
       0x102811000 -        0x10287ffef +com.adobe.headlights.LogSessionFramework (??? - 2.1.2.1652) <25E6F475-1522-419C-2169-547FCF2FD97F> /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Frameworks/LogSession.framework/Versions/A/LogSession
    0x7fff69a55000 -     0x7fff69a89baf dyld (195.6 - ???) <C58DAD8A-4B00-3676-8637-93D6FDE73147> /usr/lib/dyld
    0x7fff8bf3c000 -     0x7fff8c255fff com.apple.Foundation (6.7.2 - 833.25) <F6584E06-7C8F-3422-AF84-3AA58EC67935> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x7fff8c404000 -     0x7fff8c404fff com.apple.ApplicationServices (41 - 41) <E23F1CED-C0FB-35A8-9657-484C5E6A32AE> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices
    0x7fff8f067000 -     0x7fff8f067fff com.apple.Cocoa (6.6 - ???) <9E3D4787-A2CE-38E0-BEF8-E5DA63B6E6A1> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    0x7fff8f774000 -     0x7fff8f774fff com.apple.CoreServices (53 - 53) <97E086D0-20B4-3BB4-BEE2-04EE5700D55B> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x7fff90a9b000 -     0x7fff90a9bfff com.apple.Carbon (153 - 153) <51D75B5A-3F04-32C9-BBA4-A96AF6E3FDFA> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x7fff935c3000 -     0x7fff941c9fff com.apple.AppKit (6.7.5 - 1138.51) <44417D02-6123-3FC3-A119-CE51BB4C3006> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, SMC 2.3f32
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: USB Ethernet, Ethernet, en3
Serial ATA Device: APPLE SSD SM256E, 251 GB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x1a120000 / 4
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52b, 0x1a124000 / 7
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc529, 0x1a123000 / 6
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0x1a121000 / 5
USB Device: Apple USB Ethernet Adapter, apple_vendor_id, 0x1402, 0x1a121400 / 9
USB Device: OWC Mercury Elite-AL Pro RAID, 0x23a4, 0xc425, 0x1a121200 / 8
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2512, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0262, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8286, 0x1d181300 / 6
USB Device: AudioQuest DragonFly, 0x21b4, 0x0081, 0x14100000 / 1

Process:         Adobe Illustrator [10720]
Path:            /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Identifier:      com.adobe.illustrator
Version:         ??? (???)
Code Type:       X86-64 (Native)
Parent Process: launchd [217]
Date/Time:       2013-01-25 19:06:48.754 +0100
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          4208821 sec
Crashes Since Last Report:           817
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      C8F7629A-E5BA-4292-8785-985A69E027D1
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/AdobeCrashReporter.framework/Versions/A/AdobeCrashReporter
Referenced from: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Reason: image not found
Binary Images:
    0x7fff5fc00000 -     0x7fff5fc3be0f dyld 132.1 (???) <29DECB19-0193-2575-D838-CF743F0400B2> /usr/lib/dyld
Model: MacBookPro4,1, BootROM MBP41.00C1.B03, 2 processors, Intel Core 2 Duo, 2.5 GHz, 4 GB, SMC 1.27f3
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS723232L9A360, 298,09 GB
Parallel ATA Device: MATSHITADVD-R   UJ-867
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0231, 0x5d200000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000 / 3

LR 5 has corrupted preview file

I have LR5 installed, but it has a corrupted preview file. Will installing LR from the cloud correct the problem?

You can try to delete (or move away and delete later) the preview folder that usually sits next to where the catalog is located and has the same name as the associated catalog. LR will recreate all the previews on its next start.

Corrupt System File

Hello Mac-o-Philes!
Just repaired Permissions prior to doing a System Upgrade. Got the following error message:
Repairing permissions for “Macintosh HD”
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Permissions repair complete
Any ideas? Thanks!

Mac MD wrote:
V.K.,
Thanks. I made a copy of the file, compressed it, and saved it to another location outside of the System Folder. Then I deleted the original. System seems to be running fine.
I will re=install it.
Please do reinstall it. and do not ever delete system files like this one! this is the wrong way to deal with permissions error messages.

Missing/corrupted system file in ..\system32\config and in ..\repair folder

Hello everyone,
   Could you please help me with this proble ? I have got Windows XP PRO SP3 OEM.
Today when I started pc i have got error meesage system file in Windows/system32/config missing. When I look into folder system file is here, but maybe he is broken. I said fine no problém I have got Windows/repair. I only need to copy default file to config
folder.
But..
When I wanted to copy system file from Windows/repair folder there is no system file only system.bak. So I copy this file into Windows/system32/config and rename it onto system. I tried reboot PC, I saw starting Windows logo I almost jump into air, but after
few seconds my smile disappear. I got automatic restart. I tried it again, again and again same. So I tried run pc in safe mode with same result.
On the internet I read its can be by oem version of system. But where can I get system file now. Its possible to take system file form another pc ? Thank you for your advice.

Problem solved.
There is solution which help me, so maybe it can help to others.
Its better when you can unplug disk from pc and connect it to another via usb or via ata/sata such as another disk in the pc.
1. At first at computer you need to see invisible files and protected files of operation system.
                      Computer > F10 > Tools > Folder options
2. Now on the "corrupted disk" in the root you can see folder called "System volume infomation", but I think you dont have permission for it, right ?
                       Right click > Properties > Security > Add your self and add rights
-now you can open system volume information folder
3. open _restore{hexa} folder. Now zou can see a lot of folders started RP<number>, try to open the folder with higher nubmer. Next open snapshot folder. Now you can see a lot of files. But we want
_REGISTRY_MACHINE_SOFTWARE or _REGISTRY_MACHINE_SYSTEM, choose what you need. Now copy file whant you need for example _REGISTRY_MACHINE_SYSTEM and rename it for SYSTEM.
4. Open this path Windows\system32\config and rename your corrupted file. For example "system" to system.bad
5. Last copy your new "system" file from SYSTEM VOLUME FOLDER which you created in step 3 to Windows\system32\config folder.
6. Plug your hdd back into your pc and start pc and hope all will be fine :) .
I hope this instruction will help someone, good day and smile :)

Corrupted System Files, No Longer Boots

Note: I am trying to fix my grandfather's computer, and I may not know some exact details about what happened just before the problems began occurring.
About a week ago, the computer would refuse to boot up. It would sit at the gray screen with the Apple logo without the loading dial showing. I booted off of the Tiger install disk, and ran the disk utility.
When I verified the disk permissions, it gave the error, "Disk Utility internal error: Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and relaunch Disk Utility." I get the same error message when I try to repair the disk permissions.
When I choose verify disk, I receive the error message, "First Aid failed: Disk Utility stopped verifying "Macintosh HD" because the following error was encountered: The underlying task reported failure on exit." Below in red, it says, "Invalid Key length
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit.
1 HFS volume checked
Volume needs repair"
If I tell it to repair the disk, I get the error message, "First Aid failed: Disk Utility stopped repairing "Macintosh HD" because the following error was encountered: The underlying task reported failure on exit." Below in red, it says, "Invalid Key length
Volume check failed.
Error: The underlying task reported failure on exit.
1 HFS volume checked
1 volume could not be repaired because of an error."
Is there anything I can do to save the computer?
MacBook Mac OS X (10.4.9)

looks like you've got a damaged hdd. take it to the apple store. im not sure if they can help you, they might replace the hdd for u but im not sure if they'll be able to save your files...not much else i can think of, sorry!

Firefox 26.0 update corrupts windows system files

I updated firefox mid-December 2013 on a pc running Windows 7. Everything was fine until I shut down. Windows would not start. Safe mode would not start. We eventually found that there were corrupt system files. We fixed those, uninstalled the firefox update and everything was fine. At that time I was not certain firefox was the source of the problem because I had installed other updates and programs.
I just updated to firefox 26.0 (no other changes made), shut down, and couldn't launch windows. Uninstalled the update and fixing my sytem again.

Hello,
Can you please try doing a complete clean re-installation of Firefox latest version.
Simply uninstall your Firefox and then perform a Full virus and Malware scan on your system.
You can try these free programs to scan for malware, which work with your existing antivirus software:
http://www.microsoft.com/security/scanner/en-us/default.aspx
https://www.malwarebytes.org/free/
Please see the article for more:
[[Troubleshoot Firefox issues caused by malware]]
after the malware and virus check please download a complete new Firefox from :
http://www.mozilla.org/en-US/
please reply back to us
Thank you

System file corruption-alternatives to erase&install?

To make a long story short(er) I restored from (SuperDuper) backup after the HD failed and Apple gave me a new one. Then problems occurred with the system being slow (hesitating a lot) and having trouble connecting via wireless and finally not connecting at all, and then the machine ended up in "limbo" (according to the Mac Genius.) Now I've been told to erase and install, but I'm reluctant... There's a years worth of tweaks, updates, and installs on my MacBook! (After all, that's why I was so fervent about backing up...) And Boot Camp too.*)
Evidently "some" corrupt system files made their way into my backup before the old drive failed. (There was no warning; one day it was just gone.)
My question is, is there a way to figure out/diagnose which system files are corrupt and to replace only those? Or, alternatively, is there a way to "erase and install" only the system? Please forgive my "lack of Mac," I come from many years with Windows.
*)I'm assuming I can use Winclone to restore Windows (if I really have to erase the drive) once I repartition using Boot Camp. Um, all I have to do is remember how big I made that partition...

I suggest that you start with an Archive and Install (checking the box to preserve settings). The last time I did this was in an upgrade from 10.2 to 10.3 on our little iMac G3, and after it finished, everything was just exactly the same as it had been under 10.2, except for one thing: those little pictures were gone by the users' names on the login screen (it was trivial to reconnect those pictures with the names). So I would try that, and see if your issues are fixed. If they are not, then there is another step you can take, which is to delete your preference files that are associated with the problem (i.e. wireless, airport). and if these things are not effective, then I would proceed with the full erase and install. I haven't done the Archive and Install with Tiger but I don't think it gives you a lot of options about what setting to save ... I think it's either all or none.
By the way, before doing any of these things, you should make at least one complete backup or clone of your entire disk.
Also, before doing Archive & Install or Erase & Install, create a new user and login as that user to see if the problem goes away. If it does, then there is not much point in doing a new system installation because the problem would have been pinpointed to your local user files/preferences, not the system-wide software.
I am not surprised that the Apple Genius suggested Erase/Install versus Archive/Install. The Erase/Install is guaranteed to fix any software issue, so the Genius won't need to deal with you in a follow up anymore. They have people lined up and want to just get you on your way, even though it might cause you a lot of work to recover all your settings and installed software (that's your time, not his). The Archive/Install is also highly likely to fix almost all software problems, but if it's something corrupted in your user settings, then it might not, in which case you'll be back and he'll have to deal with you. So he's suggesting killing a fly on a window with a sledgehammer, when maybe a flyswatter would work just as well (and cause less collateral damage to your house). I understand the motivations of a busy Apple Genius, but from your point of view, it would be better to try the other things before finally going to the erase and install.
Remember to do that backup before trying any of these things.
In general Macs do not need to have system software reinstalled. In fact I have never had to do it as a repair/diagnostic step on any of my machines using Mac OS X (except that one Archive and Install I did, but that was on a healthy system to go from 10.2 to 10.3).

My Vista system crashed due to a corrupted windows file. When I reformatted C:/ & reloaded firefox & tbird, my bookmarks were gone. I have an image of the drive , but I don't know how to recover them and get the data back where I can access it.

Vista system crashed due to a corrupted system file. The C drive was reformatted, and windows reloaded, along with the rest of my programs.
Before the drive was reformatted, an image was made of it on a USB drive to save all the data. Now I need to know how to get the Bookmarks back for Firefox, and the Address Book back for Thunderbird.
Thanks

Thanks for the quick response. It worked very well, for both Firefox and Tbird.
One hitch, until I remembered: those are all hidden files, in hidden folders. I had a devil of a time finding the "roaming" folder, until I found out how to unhide everything. In years past, I used DOS for that kind of thing. Explorer is much less user-friendly. Now that I know how to do it, it's simple.
Thanks again for the guidance

Since updating iBooks has corrupted my hotmail download??

As always I click email,if it has a PDFs attached,tap to download,tap it iBooks flashes up and stops downloa, please help,this is only on pad not iPhone????????

No i didn't want to just moan i couldn't post any more as my phone totally shut down again so have had to swap to my ipad. The problem i'm having is that the phone keeps totally shutting down from anywhere from 5 minutes to 13 hours then it will suddenly come back on and tell me the battery is almost dead when it is actually full. When it shuts down it shows the charge symbol but does not recognize the charger being connected. Have been told that the new update has corrupted all my software.

How do I install a new system file to replace the damaged one

I am tring to repair the permissions on my computer and am getting all of these types of errors. Computer is dragging. I reinstalled my operating system and this is what is happening. Any suggestions. Happening on my desk top I Mac and on my Mac Book. I did google search and Error 23 is "These errors indicate that the Mac tried to access one of the standard routines in the system file and couldn't find it. In all probability, that means you have a corrupted system file. Try installing a new system file to replace the damaged one."
Here is a sample of what disk utilities says
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/cdesc-Con versions.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_format ted_s-i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_param- i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_query- i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_senten ce-i.yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/Conversions/to_xml-i. yaml
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/ExtractOptions
Open error 23: "Too many open files in system" on System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/gems/1.8/doc /activesupport-2.3.5/ri/ActiveSupport/CoreExtensions/Array/ExtractOptions/cdesc- ExtractOptions.yaml"
It says it should be done in 6 minutes and I am going on hours!
Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib".
Permissions differ on "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib", should be drwxr-xr-x , they are -rwxr-xr-x .
Repaired "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib"."
Any suggestions?

I would apply or reapply the 10.6.8. Combo Update from Safe Boot (hold Shift down at startup -- give it much more time to boot than usual and leave it in SB for a few minutes before doing anything.)
http://support.apple.com/kb/dl1399
The messages you are seeing beginning with "Permissions differ on...." can be ignored.

How can I repair Vista system files with only a Toshiba recovery disc??

I have pretty much come to the conclusion that the reason I can't install Vista service pack 2 is due to some corrupt vista files. I ran the program that checks that system files and it said some are corrupt. There are some things I can't do, like turn on the Windows firewall even from that special adminostrar screen, or if I schedule a check disc scan, when I reschedule it for start up, it doesn't do it at startup. I had a Red Screen about a year ago, and it did a bunch of stuff and at the end, it said you had a major event and contact your administartor. Well, I am the administartor, lol. Anyway, it worked fine and I attribute these problems to that event.
Vista discs come with a repair option. All I have is the Toshiba disc that lets you reinstall the Toshiba and Vendor applications OR reformat the hard drive. I am not going to spend days trying to get my system back to where it is by tracking down everything I have installed especially when its working. Is there a work around? I will buy a Vista Home Premium disc if I have to before refortmatting. I have an x205-S9349 with Vista Home Premium. THANKS!

Satellite X205-S9349
I ran the program that checks that system files and it said some are corrupt.
Sounds like System File Checker.
   How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows...
To follow up...
   How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program ge...
can't install Vista service pack 2
Maybe this helps.
   How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
Notice that you can get free support from Microsoft.
   Free Unlimited Support Vista Service Pack 2 sp2
-Jerry

Edit System File name

I purchased my iMac at a Naval Exchange. It was a display model and it still has a system file named "nex." As I understand, the only way to edit that name is to perform a complete new OS X setup. I'd obviously prefer to simply change the system file name. Help!

I'm not sure what you are calling the "system file"... do you mean the user folder name? If so, it is possible, though not particularly easy or advisable, to change the user name (and thus the user folder name). See:
http://support.apple.com/kb/HT1428?viewlocale=en_US
Since this sounds like a used machine, and could for all you know have something malicious installed by the previous user, you would be wiser to erase the hard drive and reinstall the system from scratch.

I-Tunes update has corrupted system files

Similar Messages

Maybe you are looking for