I Tunes View

i Tunes groups a lot of my albums as compilations and i want to remove them from the compilations file and have them as stand alone files.
for instance i have a Neil Young Greatest Hits album and instead of being grouped with my other Neil Young albums it is grouped as a compilation

Hey there,
Try this:
Highlight all the tracks that are a part of the compilation (hold down the control button to select multiple items at once). Right->click on them and choose Get Info from the menu. From there, head over to the Info tab.
Towards the lower right hand corner there should be a check box next to "part of a compilation." Go ahead and remove the check mark. Then hit ok to apply the changes.
Hope this helps.
B-rock

Similar Messages

  • Doubt about Tunning View Objects

    Hi !. I have the following doubt about tunning View Objects:
    If I have the following configuration on a VO:
    All Rows
    In Batches Of: 11
    As Needed
    Access Mode: Scrollable
    Range Size: 10
    Total Records On The Table: More than 100
    What would happen is that while the initial render, the view cache is fetch with 11 rows from the table and the ui table shows 10. In subsequent scroll events, more queries again will be done but not when the user scrolls back. My doubt is this one: Why, while the initial render If I put a breakpoint in this overrided method executeQueryForCollection, the execution reachs there but in subsequent scroll events (forward) the execution doesn't reach there ?. I understand thast this should happen as the required rows are not yet in the cache. I would like to know a way to test this access mode and what method is executed in every roundtrip to the DB. Thankx !.

    I don't think ADF needs to execute the query again - it just needs to fetch the next set of records.
    So if the cursor is already open, no need to issue another query.
    You can use the HTTP Analyzer to watch network traffic
    Monitoring ADF Pages Round-Trips with the HTTP Analyzer
    And you can use the logging features of ADF to see the queries being executed.
    Declarative View Objects (VOs) for better ADF performance

  • Broadcom crystal hd card

    hi there. just purchased a s10e and im wondering if this card will work.
    http://www.ebay.com.au/itm/190573260699?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
    or hopefully (cheaper) this one
    http://www.ebay.com.au/itm/300652294807?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
    if anyone has had success with either of these 2 cards i'd like to hear about it
    ie has it made any difference to watching youtube or avi files ?
    thanks in advance
    benjamin
    PS im running ubuntu and macpup linux
    although im still interested about how it runs on windows

    I have topic regarding S10-3t and the Broadcom card.
    http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/S10-3t-Tweaking-Blog/td-p/682965
    Hope it helps.
    In short you can use the card with most software avaiable. Media Player classic, Windows Media player/center, ProgDVB for TV tuner viewing, or XMBC.
    Lenovo S10-3t:
    Atom N550, 2gb Ram, OCZ Vertex 2E 180G, Avermedia A316, Broadcom Crystal HD, Samsung Blu-Ray USB drive, Edimax Wifi EW-7811Un.

  • Why does Firefox not allow me to access podcasts by clicking on the "view in i-tunes" link from a website?

    When I click on "view in i-tunes," Firefox starts opening multiple tabs at a rate of 4 or 5 per second. The only way to stop it is to turn off the computer & reboot. How can I fix this?

    See this support article. <br />
    https://support.mozilla.com/en-US/kb/Firefox%20keeps%20opening%20many%20tabs%20or%20windows

  • How do I view ipod music files with out using I tunes?

    I trying to view my Ipod music files without using itunes. But when I conect my Ipod to my pc I can only view contacts, notes, and caladar through the driver.
    How do I view ipod music files with out using I tunes?

    they should be under ur my music folder if u have windows

  • I can't view the pictures I've downloaded from my ipad to my PC. The only options I have is Tunes, TV, Movies or Apps. How do I view pictures on my PC.

    I can't view the pictures I've downloaded from my ipad to my PC. The only options I have is Tunes, TV, Movies or Apps. How do I view pictures on my PC.

    What happens when you try to play the actual film ? And have you tried deleting them and (assuming that they're still in the store) redownloading them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page - or going into Edit > Preferences and on the Store tab ticking the 'show iTunes in the Cloud purchases' tick box so that they show in the My Movies part of your library with a cloud icon against it for redownloading) ?
    (You can't store films in the cloud, whether they will show there for redownloading depends upon what country that you are in - and if you move countries or if the rights-holder removes them then you also won't be able to redownload them. Ideally you'd be taking a backup copy of all of your downloads, and not relying on being able to redownload them in the future.)

  • Do I need to tune the base query of my materialized view ?

    Hi gurus,
    We implement materialized view (FAST REFRESH ON COMMIT) on base table used in OLTP system. In fact the MV itself is also queried by the OLTP system itself, interactively.
    Currently user complain that after they input transaction, they see that the MV is not refresh as soon as they commit the transaction.
    (it takes 5 to 10 minutes before they see the update on the MV)
    The query of the MV is attached below, it consists of union all of two queries but actually the real query has 13 queries on a UNION ALL.
    The question is :
    Do I need to tune the query that forms the MV ?
    Does it impact the refresh time of the MV ?
    Thank you for your help,
    xtanto
    SELECT GRNH.DOC_CODE ||' '|| GRNH.GRN_NO, GRNH.GRN_DATE, GRNH.REGS_CODE,
    F_Convert_Qty_K(GRND.PRODUCT, GRND.QTY, GRND.UOM) QTY_IN, 0 QTY_OUT, 0 QTY_ADJ, 'N/A'.....
    FROM GRN_LOCAL_D GRND
              JOIN GRN_LOCAL_H GRNH ON GRNH.GRNH_ID = GRND.GRNH_ID
              WHERE GRND.PRODUCT IS NOT NULL AND GRNH.WH_CODE IS NOT NULL
    UNION ALL
    SELECT GRNH.DOC_CODE ||' '|| GRNH.GRN_NO, GRNH.GRN_DATE, GRNH.REGS_CODE,
    F_Convert_Qty_K(GRND.PRODUCT_B, GRND.QTY_B, GRND.UOM_B) QTY_IN, 0 QTY_OUT, 0 QTY_ADJ, 'N/A'...
    FROM GRN_LOCAL_D GRND
    JOIN GRN_LOCAL_H GRNH ON GRNH.GRNH_ID = GRND.GRNH_ID
    WHERE GRND.PRODUCT_B IS NOT NULL AND GRNH.WH_CODE IS NOT NULL
    UNION ALL
         ......

    Hi Justin & APC,
    Are they seeing a 5-10 minute delay in being able to commit their transaction?NO, the commit itself is completed normally, but after that when they go to the page (this is webbased app) that display data from the MV, the newly committed transactionis not there yet. Only after 5-10 minutes we can see the new data.
    What does the F_Convert_Qty_K() function do?It is a function that convert the quantity from whatever Unit Of Measurement (UOM) into the smallest UOM. Below is the code.
    So the question remains:
    why intermittently theere is delay before the new data visible in the MV ?
    Thanks you,
    xtanto
    CREATE OR REPLACE FUNCTION F_Convert_Qty (pProduct VARCHAR2, pQty NUMBER, pUOM VARCHAR2)
    RETURN NUMBER
    IS
    vQtyBase NUMBER(13,5);
    BEGIN
    SELECT CASE WHEN pUOM = ( SELECT UOM_BASE FROM PRODUCTS WHERE PRODUCT = pProduct)
              THEN pQty
         ELSE
                   SELECT ROUND(pQty * Coefficient / Divisor, 5)
                   FROM (
                             SELECT Coefficient, Divisor FROM CONVERT_UOM
                             WHERE PRODUCT = pProduct AND UOM_CONVERT = pUOM
                             ) tmp
              END INTO vQtyBase FROM DUAL;
    --RETURN (vQtyBase) ;
    RETURN ( NVL(vQtyBase,0) ) ;
    END F_Convert_Qty;
    /

  • I have purchased tv shows on my I pad in I tunes yet they don't show on my iPad anywhere!i have tried syncing to my pc and they show and can be viewed in there.how can I get them to show on my iPad?i have turned on home sharing as well!

    I have purchased tv shows on my I pad in I tunes yet they don't show on my iPad anywhere!i have tried syncing to my pc and they show and can be viewed in there.how can I get them to show on my iPad?i have turned on home sharing as well!

    Where are you looking on your iPad for the shows?  In iTunes?  If so, look under Videos.

  • Home sharing - view format for other users tunes

    When I home share with another user's tunes, I can't get a fully organised view format (e.g. under "view" menu, sort by list, cover flow etc are greyed out). I can only get a single long list which is pretty-not-useful... It looks like this is the only way to go, but does anyone know how to get a fully featured and formatted view of another library? Thx M

    Store the media files somewhere other than the standard location. Other users cannot access the files if they are stored in the standard location. Example c:\itunes media
    Within each users login, set the library location to the location you want. Each user can access all the files and the library for each user will be different.
    My wife and I do this with an external drive on our home network.

  • How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    Hello,
    I apologize for submitting this question.  Soon after I posted it I saw a similar question that had my answer..
    Again, my bad for not looking first.
    Ron Morris

  • How to tune a view?

    Hi all,'
    yesterday i found one query which is taking long time. when i checked the explain plan for that query it shows for onr table cost is around 16132..
    but in that query oracle its not using the table rather than table oracle itself created i guess inline view. so they are trying to fetch the values from that. is there any way to tune the view? or i shall remove the view and mentioned the table name wil it works?
    Regards
    M.Murali..

    SELECT DISTINCT CVR_CODE FROM BV_NEWTABLE T A ,BV_TBALE B WHERE A.CONTRACT_ID= B.CONTRACT_ID AND B.MASTER_CONTRACT_ID =:1
    AND B.MASTER_FLAG ='C' AND A.CLAUSE_YN IN ('Y','W');
    i just give the query with changing table name ..i cant paste the explain plan here.since its not able to paste it from toad.
    The below are two views
    BV_NEWTABLE T A
    BV_TBALE B
    pls suggest,
    Regards
    M.Murali..

  • Having a view of the bitrate of ALL tunes on mi

    Is there anyway to use the software that came with the micro, or WMP, or Musicmatch, or Napster - whatever. to see the bitrate as a column in all of the songs on my micro? I haven't found this anywhere - I can get columns on just about anything but bitrate - of course for the songs on my puter WMP Musicmatch and Napster show it fine. They even did with my iri'ver since it showed as a separate dri've...
    I know I can check the songs individually - but I'd like to see them as a column like most music programs is this possible.
    Realplayer has a quality column under devices - but it doesn't show any values in it.
    Thanks for any help.

    On all the hard dri've players, you can view Track Details of a playing tune, which shows bit rate.
    The key is a Playing Tune not one from the library. Keep in mind all Nomad's and Zen's build their index and display from the original id3 tags. Bit rate is not specifically stored in the id tag, it is a property of the file. So that would need to be deri'ved by the player. Windows and various softwares do this as the file system is being backed by the host processor ... A player would need to process the file in some similar manner.
    It probably could be something that could be added to the firmware, but no doubt it would affect the total indexing and result in a lower 'Dark Limit' (important for those with large collections trying to get all those tunes on the player).
    jake

  • Problem viewing I-Tunes 8

    When viewing I-Tunes 8, the music library list background is purple and the left hand menu bar is very dark gray, making it almost impossible to read. If I click on the full screed icon, it goes back to white but only until I do something else. Does anybody know what might be going on here?
    Message was edited by: Bill@NYC

    On your display properties, change the colour settings to Highest (32 bit). This should fix the problem.

  • Tunning Custom View Definition

    HI All,
    I have a custom view which i have to tune. That view itself is built over two other
    views.
    Since I am new to tunning, can anyone please tell me how to actually start for tunning ? For what all factors I should look for..?
    I tried Explain Plan of Toad to recognize a view query which is having higher cost..
    But dont know whether only this factor is enough to decide which Query I need to tune...
    Please help
    Thanks In Advance..

    You could also try to gather the real execution data with SQL trace and TKPROF as recommended in following thread:
    When your query takes too long ...
    and compare it with the explain plan.
    In the explain plan, you should try to identify the steps that are likely the longer steps because, for example, they are doing a full table scan on a large table.
    It can be easier to work on TKPROF output because it will display physical and logical reads for each query step (EXPLAIN PLAN doesn't do this).
    If you post your explain plan and/or TKPROF output, please post also:
    - full Oracle version
    - number of rows of all involved tables
    - description of indexes on all involved tables
    - how you compute statistics on database objects involved in the query
    (10g default, customized DBMS_STATS script, ANALYZE statements).

  • Before downloading the latest version of I-Tunes, I used to be able to view the ALBUM ARTWORK at bottom left when clicking on a song.   I am now unable to see the artwork.   Is it no longer possible with the updated software ??

    before downloading the latest version of I-Tunes, I used to be able to view the ALBUM ARTWORK at bottom left when clicking on a song.
    I am now unable to see the artwork.
    Is it no longer possible with the updated software ??

    Correct, Apple have removed that feature. However, you can still see the artwork of the song that's playing; it's shown in the Now Playing indicator at the top of the iTunes window. It is small, but if you click on it, a larger version pops up.
    Also, in Albums View, you can see the album artwork.

Maybe you are looking for