I-tunes will not install. even after i used all of the help offers.

Okay so, My computer has JUST recovered from a huge virus that decided to completely demolish everything but the computer was still able to be fixed. So i reinstalled windows and most of my drivers. Now i am trying to install I-tunes and it keeps giving me the message: An error occurred during the installation of assembly 'Microsoft.VC80.CRT,publickeyToken="1fc8b3b9a1e18e3b",type="win32",Version=8.0. 50727.762",processorArchitecture="x86"'.Please refer to Help and Support For more information. HRESULT: 0x80070424.
so if anyone has ANY idea what that means i would love for you to tell me cause its starting to anger me tremendously.

An error occurred during the installation of assembly 'Microsoft.VC80.CRT,publickeyToken="1fc8b3b9a1e18e3b"
,type="win32",Version=8.0.50727.762",processorArchitecture="x86"'
.Please refer to Help and Support For more information. HRESULT: 0x80070424.
Not the most common of iTunes installation error messages. That one often seems to be a side effect of the same problem that causes error 8007000b when you try to install Windows Vista updates.
To doublecheck, try getting some Windows Updates. If they error out with an 8007000b, try the following Microsoft troubleshooting document:
http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-8007000b
If that fixes your 8007000b, does your iTunes installation also go through properly afterwards?

Similar Messages

  • My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. What should I do?

    My iPod Touvh 4th Generation won't turn on. It will not charge even after I used a few chargers and will not connect to a computer. The Home button is broken and I don't know if the Lock/Sleep button is now broken or stuck as well. I believe there may be a problem with the battery or the backlight. I've had my screen replaced once by some stooges. What should I do?

    Try:
    - iOS: Not responding or does not turn on
    When it  says place the iPod in recoverymode use one of these programs.
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                  
    RecBoot tip
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Firmware 1.1 upgrade will not install - even after uninstalling Parallels

    I was asked to upgrade my firmware (on many occasions, actually). I go through the process and it will not install. It asks me to shut down the computer and continuing holding the button until the light blinks. It then makes a noise (high pitch tone), this stops, the mac screen comes up gray and a bar comes up and disappears immediately. The computer boots and then the firmware page opens and asks me to go through this again. I cannot get to "OK". I called Apple and was told this happens with Parallels installed and I should uninstall this. I have tried this and it makes no difference. There may be some files I should delete - but I wasn't instructed to do this.
    HELP!!!!
    Mac Pro   Mac OS X (10.4.9)   Parallels virtualization for XPpro

    Hi Tom,
    very easy by booting up from a Non-RAID-Boot Volume.
    This could be an internal or even an external Drive, doesn't matter.
    One of the reasons I have two external drives for my tow Macs.
    Regards
    Stefan

  • Charter Security Suite will not install even after they removed my existing antivirus

    This is important to me because I am a quadriplegic who relies on my laptop to connect me to the world outside my bed aND MY SMART TV for entertainment.I tried unsuccessfully to load Charter Security Suite,  I then contacted Charter tech support on 7/30 who took me through gotoassist - He confirmed that I had no existing antivirus on my laptop. He took down my firewall and again was unsuccessful at downloading Charter Security Suite. After that time I get a warning my computer has no antivirus and my windows 7 computer is unable to get automatic updates. He told me he would report the problem and I could expect a call from 24 to 72 hours from F-SECURE.I did not receive the promised call. i don't know if he did something to my computer that made anything better, but my situation is definitely worse after uninstalluing the working version of macafee. But I am really worried after he said, "It is not a real big deal, just don't go to any weird websites!" Now that I am vulnerable, i AM VERY CONCERNED AND HAVE NOT HEARD FROM F-SECURE ABOUT RESOLVING MY ISSUES AND SUBSEQUENT CHARTER TECH SUPPORT CALLS HAVE NOT RESOLVED MY ISSUES. ps - I'm getting two red flag notices since 7/30 - one regarding my lack of antivirus, and one telling me windows could not automatically check for updates! HELPDaniel.

    Hi Daniel, Sorry you're having hassle with this.  I'm not familiar with the Charter Suite, but I assume from what you've said, it's a rebranding of F-Secure, so the advice I am suggesting below is based on that premise. The guy who said it's "not a big deal" having no anti virus was probably just trying to put your mind at rest, but in essence, he does have a point that if you stick to known safe websites, don't open any unexpected email attachments, and don't click on any popups, banner ads, or anything else which may look suspect, you should be fairly safe, as viruses don't tend to just appear out of nowhere, without any interaction from the user.  That said, while this issue is ongoing, I would suggest that you download Malwarebytes and have that running as a backup.  This is compatible with F-Secure so shouldn't cause any further installation issues, and will hopefully give you some piece of mind. The next thing I would suggest is to download and run the full McAfee uninstaller, which you should find linked to on this page of Uninstallation Tools. Once you have run the tool, then run the F-Secure Uninstallation Tool to fully remove any part installations of F-Secure, and try your installation again. As I said, the above is based on the assumption that Charter is the same as F-Secure in all but name - if this is incorrect, then I apologise in advance for any mis-information, but I don't think any of the above will do any additional harm to your computer. Let us know how you get on. 

  • Flash plugin will not install even after installing the latest version Flash

    When I go to a site that contains Flash content, it says "A plugin is needed to display this content" and there is a link to install the plugin. Additionally, there is a message at the top of the page that says "Additional plugins are required to display all the media on this page" with an option to "Install Missing Plugins." I click the link to install the missing plugin, and a dialog box pops up that says "The following plugins are available:" and lists "Adobe Flash Player 11.0.1.152" with a check box next to it. The box is checked, and I click "Next" to install. It goes through the motions, and then tells me that "No plugins were installed." There is a link to manually install the plugin, which takes me to Adobe's Flash download page. I unchecked the box to pair McAfee Security with the download, and downloaded the latest version of Flash (to be honest, I've actually downloaded this exact same version about 10 times today). The dialog box pops up, I save the file, and once it has downloaded, I open the containing folder (my downloads folder). I then close all programs (including Firefox) except for the Windows Explorer folder that I'm going to run the installer from. I double-click on the Flash installer to run the installation. The installation process completes, the installer tells me that the download is successful, and my browser opens back up with an "Installation Successful" message from the Adobe website. Yay! My installation is successful... Orrrrrr not. Navigating back to the page with the Flash media - still have a message saying I need the plugin. Attempt to download plugin again...no dice.
    THEN, I go to "Manage my add-ons" thinking maybe I need to enable the plugin. There is no Flash (or Shockwave) plugin listed on any of the menus - it's like it doesn't exist.
    I downloaded the latest version of Java because I read somewhere that Flash requires Java to work; I installed the "Add-On Compatibility Reporter" so I could force Java to be enabled. It made no difference whatsoever, as best I can tell.
    I also went to Adobe's page where you can see what version of Flash you're running (http://www.adobe.com/software/flash/about/) and it doesn't even show that I have Flash installed. In Internet Explorer, it does show that I have Flash installed, but it's the previous version (but that is likely due to the fact that I downloaded Flash from Mozilla, not IE, and they use different modes in each browser - so an update that you download from one browser does not necessarily apply to the other browser).
    So in summary: I do not know what on earth is wrong here, but I am about as frustrated as I have ever been in my life. I don't know why the Adobe Flash installation is saying it is successful (is it lying to me??), but there is no plugin showing up in my Manage Add-Ons menu, and I have googled every possible combination of the content in this post and have not found a solution that works yet.

    NOTE: Just discovered that Adobe is making a bigger mess than any previously.
    They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
    *32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
    *64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe

  • App will not open even after reinstallation

    How do I resolve this?  Reinstalled multiple times, tried shuttting iPad down, is it a settings issue??  Running iOS 5.1.1 still, is that the issue?

    I'm sorry to hear that you have trouble running
    PS Touch.  Please try to install via iTunes. This normaly helps.
    -Guido
    Am 02.02.2013 um 06:34 schrieb "seankelleher" <[email protected]<mailto:[email protected]>>:
    Re: App will not open even after reinstallation
    created by seankelleher<http://forums.adobe.com/people/seankelleher> in Adobe Photoshop Touch - View the full discussion<http://forums.adobe.com/message/5041972#5041972

  • Got a new ipod touch 4th generation but i tunes will not recognize it after i updated my itune, help

    got a new ipod touch 4th generation but i tunes will not recognize it after i updated my itune, help

    What happens when you try to install the iTunes update? Error messages?
    You might have better luck posting in the iTunes forum sinc you have an iTunes problem, not an iPod problem.

  • CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from

    CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps).  So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens.  What next?

    Try...
    Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html

  • My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

    My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.

    After pressing restore and after l5 minutes or so It comes up with the error 1611 and I followed all the steps but it still won't work.

  • My ipod will not open even after following instructions online

    my ipod will not open even after following instructions online

    Do you mean you can't unlock it?
    We have no way of knowing exactly which online instructions you may have tried.
    Apple - Support - iPod touch - iPod touch Troubleshooting Assistant
    iPod touch: Hardware troubleshooting

  • TS3274 My Ipad will not come on after reset. All i get is the little white apple to appear that is it. Any suggestions ?

    My Ipad will not come on after reset. All i get is the little white apple to appear that is it. Any suggestions ?

    Hi Dawg70,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281?viewlocale=en_US
    Cheers,
    Judy

  • My itunes wont sync with my iphone at all, even after i did all of the steps given to me by apple. what should I do?

    my itunes wont sync with my iphone at all, even after i did all of the steps given to me by apple. what should I do?

    A wet phone is out of warranty. This is considered user damage. Even if you were able to get it to start now, the chances of it working for long are slim. I suggest going to Apple and see about an OOW replacement. One for the iPhone 4 is only $149USD and it would come with a short warranty. It is a refurbished device and you would not be worried about encountering additional problems.

  • Black ink cartridge will not print even after installing a new cartridge

    my black ink cartridge is brand new and will not produce any print.    The other 3 color cartridges are also new and they print fine.  The set up cartridge is out of ink.  Is it needed once the printer has been set up?

    Hello rhergnal,
    Welcome to the HP Forums.
    I see that you are having some issues with printing in black.
    Just so you are aware, you do not need to keep the starter ink cartridge once it has been used.  It will not be needed again.
    Please click on the following link that deals with when the Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart Premium e-Al....
    Please feel free to write me back if you have any other questions or concerns.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Spoken work files will not play even after importing/converting?

    I have some audio files recorded on my Android phone with the basic recording app and the files play when I press the spacebar to preview them in Mavericks. However, after importing them into iTunes using various import settings, including the podcast spoken word ones, they just will not play. When I double click on the file it looks like it is about to play, the apple icon at the top switches to what looks like a progress bar, though it is different from other tracks that do play, and then it immediately switches back to the apple icon and does not play.
    Any ideas of anything I can do?
    Thanks.

    I've found an issue with movies when the audio is IMA format. Is that the format of your audio?

  • Permissions will not set, even after using terminal commands?

    Hey,
    I found a thread on here for using the terminal to type in commands for the user permissions and for the PSIX permissions on Leopard (10.5) server.  These commands are supposed to clean the server of all underlying(hidden) permissions that you cant see and then you are supposed to be able to then set the permissions again and finally, to hit "Propagate Permissions" so that all the permissions set for the shared volume then get farmed out to all sub files/folders.  This did not work when I tried it in the terminal, it said "Command not found" even after I typed in the admin password.  Is there anyone out there who can tell me the actual way to fix the old permissions and get new ones set?
    The story is:  We had an old server on a G4 when i first took control of the server, I took the shared hard drive out of the G4 and inserted it into a G5 and started using it with the leopard server.  the permissions did not really need to be set on that volume because they had carried over from the last time they were shared.  But we recently just got a Drobo unit for our server and I recently transferred all the shared files and folders over to the new volume, but ever since I cant get the permissions to farm out to all the stations, it shows me that its done on the server.  But when I go to access the files I am able to delete faculty folders where I had set the permissions to "read only" so I am wondering if there is a streamlined way of going about this or if I should just start from scratch and use all brand new HDD's?
    Please Help!

    Hi ..
    Try the tips mentioned here > Mini-tutorial: Force-deleting stubborn or problematic files in Mac OS X

Maybe you are looking for