I Tunes wont even dowmload to my laptop
Just bought a new i pod Nano and have tried many times to download i Tunes 7.0.1 and it wont complete the download.It starts the process by asking do you want to save or run i Tunes.setup?which should i do?and then it gets to 99% completion and says something is invalid?
Any help with solving this problem would be much appreciated.
Steve-uk
Sony VAIO Laptop Windows XP
Try downloading AND SAVING it. If it does not complete or says the file is "An Invilid Win32 program" Try downloading it with a different Browser or a download manager
Similar Messages
-
help what do i do
my i tunes wont open on either my laptop or my home computer laptop says error 7 windows 1114 computer says error 7 windows 126 what do i do?Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/APSDaemon.dll/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
My ipod says that it is locked out for 22,696,574 minutes. ive tried putting it in recovery mode and DFU mode but nothing works AND itunes wont even recongize my ipod and when i plug it into my computer it says UNKNOWN DEVICE, SOMEBODY PLEASE HELP ME I NEED PICTURES OFF OF IT FOR MOTHERS DAY
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New -
I tunes wont download on to my laptop
hi there i have been trying to download the new i tunes to my laptop but as i get near the end a msg box comes up saying windows installer is not working contact support or vendor is this a problem with i tunes or windows any help will be greatly appreciated many thanks dave
How are you connected to the internet - through a wireless router and cable modem?
Are you downloading from the itunes DL page, and choosing SAVE instead of run? -
ok, so my itouch 2nd gen starts up only to the apple logo but stops there with the loading thing that looks like a flower. it doesnt connect to my laptop either. it got unplugged while trying to restore it on my laptop and now its not rly working. any help? i alredy tried holding both buttons down like more than 100 times and it still doesnt work. so any solutions?
Try placing the iPod in recovery mode and then try restoring the iPOd via iTunes. For recovery mode see:
http://support.apple.com/kb/HT1212 -
I tunes wont detect Ipod touch on laptop
Just bought a new Ipod touch, the desktop will detect it but the laptop won't. I also have a Ipod nano, so yes I do have itunes on both.
Check this...
http://support.apple.com/kb/ts1567
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
not responding
Try:
iOS: Not responding or does not turn on
If not successful, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I did update on phone and now it wont even turn on... It shows the charger being plugged into I tunes.... At this point I am not sure if I need to just do a factory reboot or what....AT this point I cant do anything through phone... It has to be done by my computer ... Anyone know how... I am so stressed I am on call with no phone just a pager....Not good..... Please help thanks heidi
Scroll down to "Update your device using iTunes" here:
http://support.apple.com/kb/HT4623
If that doesn't work, you should restore your iPhone as described here. Note you may have to try to get into the restore state more than once to succeed.
http://support.apple.com/kb/HT1808 -
I tunes wont download to my laptop
I have just bought a new i pod Nano and have tried on many occasions to download i Tunes 7.0.1 to my laptop,and every attempt comes with the same result download failed.could anyone help please.
go to the download section of the i pod web site and select download i tunes ; it then comes up with run or save itunes.setup.exe?what should i select?and i have selected both and it gets to about 98/99% completion an says it has failed .It says "the publisher could not be verified.are you sure you want to run this software?i select run and it says C:\Documents and settings\Steven\Desktop\iTunesSetup.exe is not valid Win32 application>whats going on?
Any help would be much appreciated
Steve-ukHow are you connected to the internet - through a wireless router and cable modem?
Are you downloading from the itunes DL page, and choosing SAVE instead of run? -
I finally fixed the installer error for itunes 5.1 and now it wont even start up can anybody help me out!!!!
Looks like I might have found the solution on a youtube comment:
R.O:
"Plug into you laptop first, whichever set up you use that has iTunes, i know it won't read it, don't even open iTunes as of yet. Do the typical reboot "Menu +Center button at the same time" and hold it, DONT LET IT GO like we were told, when the apple pops up.. KEEP HOLDING IT it will make a new ding sound I've never heard before. and since its hooked to you laptop already an error message pops up and says apple will need to download something to repair your iPod. I when u see that that when i let reboot buttons go. hit ok on the laptop something downloads for like 20 seconds then the iTunes icon hops around when you open it it has a screen with an iPod classic on it and says "Software version blah blah, iTunes will check for an update on such n such date" AND FINALLY there's a "Restore" button. click that and you will be back to square one with your iPod. Renaming , adding all the music on it, but it will work again, finally. "
I had to do it twice, because my mac froze the first time, but its recognized it now and is downloading the software as we speak...
Now I've clicked the restore button and it's restoring... I'll post again if its a success, otherwise assume failure. -
I have a very old (refurbished, bought over 4 years ago) macbook pro 15". It's been running ok on OS X 10.5.8 until very recently. It started ejecting disks, and then the new adobe flash player update wouldn't work. Lots of other little things have been happening as well.
I had been considering buying a new macbook, but one of the Apple store people suggested I update instead (a much cheaper alternative!). So I bought Snow Leopard, and it arrived in the post today. But now my macbook wont even accept the dvd. It takes it in, whirs and complains a bit (for less than 60 seconds) then ejects it again. I have tried cleaning the disk, cleaning the disk area with a credit card + lens cleaner (a trick I saw recommended on this forum). But no luck.
Any advice?
I am a trainee teacher and actually will be gutted to have to get a new laptop (as I really cant afford it). BUT obviously if I have to I will. I just need to extend the life of this one for as long as possible, until I have more money to get a better one!Bring your MBP to an Apple store genius bar and see what they say about your MBP optical drive.
Look on the OWC web site. They sell optical drives for older MBPs. Perhaps there is one that will fit yours. Installing one is not brain surgery.
Otherwise examine the iFixit.com and Powerbookmedic.com web sites for replacements.
Ciao. -
Ipad wont charge when connected to laptop but charges when connected to wall outlet
ipad wont charge when connected to laptop but charges when connected to wall outlet
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
Itunes wont even open. Double click = hour glass spin then nothing..
I'm having a problem with itunes8. When I doubleclick on the desktop icon, or access itunes from any shortcut or the direct EXE the mouse cursor turns into the hourglas for about 3-5 seconds, goes back to normal cursor, then nothing happens. itunes wont even pop up. I get no error messages, and I DONT get the BSOD like most are reporting problems getting. I get NOTHING at all.
I've uninstalled and reinstalled with the newer updated itunes8 installer and that still will not work. I also had itunes 7.7 downloaded from the other week before 8 was released, it does the same thing. It wont run either..
I was on the line with tech support last night (iphone tech, not itunes tech; they were closed) and we tried removing ALL startup items, installing, ect and it still did not work.
Does anyone have any idea whats up?Yes, I've tried that guide..
I spent 3 hours with tech support over the last few days and they have no idea what it could be
I've also:
disabled firewalls completely PLUS adding all Apple applications to exception list just in case
done COMPLETE uninstall of ALL apple products plus used microsoft install cleaner then reinstalling
tried booting up with NO startup items whatsoever and no services except microsoft services
Installed quick time separately first, then itunes
tried installing itunes 7.7
I thought MAYBE it was because I'm running a custom version of XP (Bariski edition) so I installed itunes 8 on my other computer which is running the plain old XP SP2 from MS and it actually did the exact same thing. It "pretended" (as i like to say) to load itunes then never popped up. -
My IPhone4 keeps buzzing randomly and now it wont even charge
My IPhone4 keeps buzzing randomly and now it wont even charge !! Please "HELP"
Info:
IPhone 4
Version : 5.1
I was having this problem with the vibration IPhone keeps vibrating randomly with no notification don't know what's the problem with it !!
And currently when I tried to charge it it wont charge I tried to do some research about this issue and have read some of the same problem
here in the forum with same issue and done almost everything changed the cable , core , usb did the hard reset still nothing !!!
Any idea would be appreciated . Thanks
Updated:
I discovered that its not a battery issue
The reason is that it's chargeable while the phone is switched off completely !
after a while you can see the battery charge is full 100%
but when it's switched on the phone wont charge or recognized
the cable from wall charger or usb so I the ITunes won't sync or see the device !
I think its something with the software !
I tried to update to IOS 5.1.1 but after downloading
it wont install the new update I got this message;
"Unable to Install Update"
An error occurred installing IOS 5.1.1
So that only chance which I think it might hwlp solving the problem is dead now
I really have no idea what to do other than taking this phone to Apple
:If you have similar issue you can write here or you can check the following post
https://plus.google.com/u/0/109937970144676369628/posts/Hrv43wnzREE
keywords:
IPhone keeps buzzing , IPhone4 keeps buzzing
IPhone4 keeps vibrating , IPhone wont charge
An error occurred installing , Unable to Install Update ,
IPhone wont connect to iTunes .UPDATE: 2
My IPhone4 keeps buzzing randomly and now it wont even charge !! Please "HELP"
https://plus.google.com/u/0/109937970144676369628/posts/CrAi9u9PZz7
https://plus.google.com/u/0/109937970144676369628/posts/Hrv43wnzREE
https://plus.google.com/u/0/109937970144676369628/posts/a2TeUdCHoQs
OK folks I started my deep research about this issue ( MY problem )
Don't know if some one out there is even got similar issue
The battery is charging well while my phone is switched off so last night
my Iphone runs out of charge completely 0% so I plugged the cable
and switch it on after a while and all the sudden it shows that the battery
is charging while its switched on !!
If you want to do this you have to plug the charging cable first then turn off
your Iphone and wait for a while then turn it back on ( sipmle off ) no need
for the (Hard) Reset or recovery mode / DFU mode .
Just as a normal way to of switching off your Iphone by
Holding down the sleep/wake button at the top right-hand corner of the iPhone for a few seconds.
This will bring up a screen asking you to run the slider across the screen to turn off the iPhone.
Wait few seconds and repeat that with holding that same sleep/wake button at the top right-hand corner for like a Sec and it will turn on , Then you can
see that your phone is charging while its on !
If you unplug your charging cable this will ruin the whole plan and if you
you plug it again it wont show anything and will not be able to charge
while its on and you have to repeat that procedure.
Now we are sure that out Dock and Charging Port and battery are working fine , So whats the problem here and why my PC wont detect my Iphone ??
Well I assume its from a part called ( PMU IC ) Power Management Unit IC
http://www.buyforapple.com/product_images/j/iphone4_power_management_un__72870.j pg
Check this out :
http://youtu.be/MJPKuLy7XQQ
So I think my main problem is from that tiny part that makes all that
problem I have now so I have to replace it first just to make sure before
replacing any other parts so this is the start I hope this was the problem
that caused all this !!!
If you have any similar issue to mine I really appreciate any advice ,
suggestions regarding this matter .
Thanks for reading
Have a great time -
I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.
When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.
Maybe you are looking for
-
Alert for new business partner
I am a novice at programming, what would the code be for an alert that would trigger when a new client is added? I have one but but it keeps on picking up all of the clients created each day when I only want those that have not been sent before (in o
-
Update of Business Partner Master Data
Greetings. I am wondering is there any way you can configure the standard system so that the analyst responsible for the business partner will receive a notfication when the business partner master data is updated in SD. Currently its linked to the c
-
Production transports referring to Dev Source system
Hi All, We have Dev -> QA -> Prod setup for both BW and R/3. In BW corresponding source systems are created in each server. Transport Connection Source sytem mapping : In BW QA , I have mapped the source systems R3DEV to REQA. In BW PRD ,I have mappe
-
Client Copy Error - (Dictionary Error)
Hi, We tried to do Client-local copy(SCCL)with login as SAP*. We choose SAP_UCSV (SAP_CUST with user master data)as copy option. We tried initially TEST run. We got error/warning as follows: Table/object - NKUK Component-FI Error-DDIC Error ( See SE1
-
I am new to the FMS....I have down loaded FMS3....I am also trying to get other to view me on my webcam through a website. My question is, do I need the Media Encoder for FMS3 or is that already included in it? Any help will be great. Thanks