I-Tunes wont work on my computer

i-Tunes wont work on my computer but it works on other computers , i tryed to install i-Tunes v8 but it says that i need XP or vista but i do have XP , i installed i-tunes 7.3 and it works but when i install the usb to my i-pod nano 4g it say i have to install i-tunes 7.6 or later . . ?
please help , any help will be useful . . .

Try b noir's user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows
tt2

Similar Messages

  • New digital camera wont work on this computer

    I have bought a new digital camera, but it wont work on this computer, it claims to be compatable, help!!

    Sorry but I think nobody will be able to help you without any further details.
    Check the user manual of this cam! Go through all the points!!!
    Check if the driver is necessary and if could be updated!!
    At the moment this is everything what I can say!

  • My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

    my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

    This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC.  So the first thing I would try and do is plug the iPod into a different USB port on your PC.  Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
    It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
    If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
    Lastly, plug the iPod into another PC to see if it's recognized there.  If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
    B-rock

  • Java just wont work on my computer

    i reinstllsd it more then 3 times alredy and tried using diffrent browsers
    i have the newst one instelld right now
    i have windows xp most updated
    but no matter what java applet i am tring to open online it just wont work
    it gives me three eror messges
    on after the ather and then the file just has a red x on it
    first this
    java.security.PrivilegedActionException: java.io.IOException: ???? ?????, ?? ?????? ?? ?????? ?? ????? ????? ?????? ??????
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sun.deploy.security.CredentialManager$CredentialPersistor.openInputStream(Unknown Source)
         at com.sun.deploy.security.CredentialManager$CredentialPersistor.getAllPersistedCredentials(Unknown Source)
         at com.sun.deploy.security.CredentialManager$CredentialPersistor.access$000(Unknown Source)
         at com.sun.deploy.security.CredentialManager.<init>(Unknown Source)
         at com.sun.deploy.security.MSCredentialManager.<init>(Unknown Source)
         at com.sun.deploy.security.MSCredentialManager.getInstance(Unknown Source)
         at com.sun.deploy.services.WPlatformService.getCredentialManager(Unknown Source)
         at com.sun.deploy.security.DeployAuthenticator.<init>(Unknown Source)
         at sun.plugin.AppletViewer.initEnvironment(Unknown Source)
         at sun.plugin.AppletViewer.initEnvironment(Unknown Source)
    Caused by: java.io.IOException: ???? ?????, ?? ?????? ?? ?????? ?? ????? ????? ?????? ??????
         at java.io.WinNTFileSystem.createFileExclusively(Native Method)
         at java.io.File.createNewFile(Unknown Source)
         at com.sun.deploy.security.CredentialManager$CredentialPersistor$1.run(Unknown Source)
         ... 11 more
    then this one
    java.lang.NullPointerException
         at java.io.ObjectInputStream$PeekInputStream.read(Unknown Source)
         at java.io.ObjectInputStream$PeekInputStream.readFully(Unknown Source)
         at java.io.ObjectInputStream$BlockDataInputStream.readShort(Unknown Source)
         at java.io.ObjectInputStream.readStreamHeader(Unknown Source)
         at java.io.ObjectInputStream.<init>(Unknown Source)
         at com.sun.deploy.security.CredentialManager$CredentialPersistor.getAllPersistedCredentials(Unknown Source)
         at com.sun.deploy.security.CredentialManager$CredentialPersistor.access$000(Unknown Source)
         at com.sun.deploy.security.CredentialManager.<init>(Unknown Source)
         at com.sun.deploy.security.MSCredentialManager.<init>(Unknown Source)
         at com.sun.deploy.security.MSCredentialManager.getInstance(Unknown Source)
         at com.sun.deploy.services.WPlatformService.getCredentialManager(Unknown Source)
         at com.sun.deploy.security.DeployAuthenticator.<init>(Unknown Source)
         at sun.plugin.AppletViewer.initEnvironment(Unknown Source)
    and then this one
    java.lang.NullPointerException
         at java.io.ObjectInputStream$PeekInputStream.read(Unknown Source)
         at java.io.ObjectInputStream$PeekInputStream.readFully(Unknown Source)
         at java.io.ObjectInputStream$BlockDataInputStream.readShort(Unknown Source)
         at java.io.ObjectInputStream.readStreamHeader(Unknown Source)
         at java.io.ObjectInputStream.<init>(Unknown Source)
         at com.sun.deploy.security.CredentialManager$CredentialPersistor.getAllPersistedCredentials(Unknown Source)
         at com.sun.deploy.security.CredentialManager$CredentialPersistor.access$000(Unknown Source)
         at com.sun.deploy.security.CredentialManager.<init>(Unknown Source)
         at com.sun.deploy.security.MSCredentialManager.<init>(Unknown Source)
         at com.sun.deploy.security.MSCredentialManager.getInstance(Unknown Source)
         at com.sun.deploy.services.WPlatformService.getCredentialManager(Unknown Source)
         at com.sun.deploy.security.DeployAuthenticator.<init>(Unknown Source)
         at sun.plugin.AppletViewer.initEnvironment(Unknown Source)
    the a red x where the applet shold be
    agein it happens to every java applet i see online

    Britteney26 wrote:
    i bought a gatway computer with windows 7 on it and the linksys wusb600n wireless adapter-its supposed to be compatible with windows seven but its really not. does anyone know a good adapter that works? i have a linksys router too.
    Brittney26, A Windows Vista Driver should be compatible with the item in the event you cannot obtain a Windows 7 Driver for it. Have you also tried to perform an update through the Windows Update function of your operating system?
    *******DISCLAIMER********
    I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

  • ITunes wont work on my computer

    iTunes just does not work on my computer, it is fully installed and all that but when i go to open the program and error message appears telling me that "the folder 'iTunes' cannot be found or created, and is required. The default location for this folder is inside the 'My Music' folder" now i obviously have got a my music folder and there is also an iTunes folder in there from a previous installment of iTunes. Is there anything anybody knows that i can do to rectify this problem?

    hiya!
    the best place to start with that one is with this document:
    iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
    but if you run into the complication where "My Music" doesn't appear as an option in TweakUI, try the alternate technique in this Nigel Carpenter post:
    Nigel Carpenter: re: Itunes problem
    love, b

  • ITunes wont work since new computer

    I had iTunes on my old computer and I just got a new computer and downloaded iTunes. I logged into iTunes but none of my songs are showing up, and I'm scared that if i plug my iPod into the computer that all of my songs will dissapear. Is there anyone who can tell me how to get my songs back without deleting all of them off of my iPod?

    Your iTunes songs will be on the old computers hard drive, so you'll need to transfer them over to the new computer. You can plug your iPod into your new computer, it wont delete the tunes on it, but I dont think you can swap them from your iPod to iTunes very easily.
    Look at these two threads which are related to transfering the files from ipod to itunes.
    http://discussions.apple.com/thread.jspa?messageID=3386821&#3386821
    http://discussions.apple.com/thread.jspa?messageID=1510817&#1510817

  • Mountain lion download wont work on my computer..why?

    i have the mac book version 5.2 i think, the white one before the macbook now. i have snow leopard currently running on my mac, and i went into the app store and clicked to buy the mountain lion, and it said " OX S mountain lion is not compatabile with your computer" ... i meet all the requirements for the installation of it, why wont it work?

    No, it's not too old. A MacBook 5.2 is a MacBook introduced in early 2009, so, it should be capable.

  • My ipod has completly knackered it's self and the touch screeen has completely packed in, wont work on the computer when i plug it in also i cannot switch it off or on standby. What should i do?

    Well lately my ipod has just started playing up basicly the touch facility has started to not work it will not let me turn it of or on standby aswell when i plug it in to my computer so i can factory reset incase it has a virus on it but it does not show on the screen also i tried drayning the battery and then recharging in hope it will work but no it still does not work. I am really stuck and I need my ipod as soon as possible please help

    hard reset the ipod. IN THIS ORDER. plug in the ipod, turn the ipod off, open itunes, press the sleep button (top) for 3 seconds, continue to press the sleep button and also (at the same time) press the home button. Contunue to do this until 3 seconds after the screen flashes. Then release the sleep button and continue to press the home button until the ipod shows up in itunes. do a factory reset.

  • My new charger wont work for the computer but will work in the wall charger

    So recently, the charger for my Ipod touch 5th generation broke(my puppy chewed it) so I went to get a new charger. I found that the new charger was not working when i plugged it into my computer. After i returned the charger, and got one that seemed a little better, i plugged it into my computer and found that that one also didnt work. I was extremely angry and confused about why they werent working. I was wondering if the problem was my ipod or the charger or the computer. So i plugged it into a wall charger in the wall and that did work! So now im assuming its just my computer but it has always worked before when i plugged it into my computer untill the last charger i had broke. Any idea how to fix this? Or is this unfixable?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod      
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    If iTunes does not see the iPod:
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • My itines wont work on my computer since updating

    My itunes will not work since updating on my computer , I keep getting runtime messeges on my laptop

    Britteney26 wrote:
    i bought a gatway computer with windows 7 on it and the linksys wusb600n wireless adapter-its supposed to be compatible with windows seven but its really not. does anyone know a good adapter that works? i have a linksys router too.
    Brittney26, A Windows Vista Driver should be compatible with the item in the event you cannot obtain a Windows 7 Driver for it. Have you also tried to perform an update through the Windows Update function of your operating system?
    *******DISCLAIMER********
    I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

  • My adapter wont work on my computer

    i bought a gatway computer with windows 7 on it and the linksys wusb600n wireless adapter-its supposed to be compatible with windows seven but its really not. does anyone know a good adapter that works? i have a linksys router too.

    Britteney26 wrote:
    i bought a gatway computer with windows 7 on it and the linksys wusb600n wireless adapter-its supposed to be compatible with windows seven but its really not. does anyone know a good adapter that works? i have a linksys router too.
    Brittney26, A Windows Vista Driver should be compatible with the item in the event you cannot obtain a Windows 7 Driver for it. Have you also tried to perform an update through the Windows Update function of your operating system?
    *******DISCLAIMER********
    I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

  • I tunes wont work after i updated it...

    So I downloaded the new iTunes. And now it will not open on my computer, I don't know what to do to get it to open. Any help would be appreciated! Thanks.

    Yeah, I'm not sitting here all day either...I didn't see your post either.
    and why did you not post your resolution so someone else can benefit?!

  • My i tunes wont work

    i click on it and this think flashes then it juss stops. the same thing is happening to my quicktime.Somebody tell me wat to Do!

    Do you have at least a 867 Mhz processor?
    " Minimum specs for Leopard:
    A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
    512 MB memory or more
    A DVD drive for installation
    9 GB of available disk space or more
    Some features require a compatible Internet service provider, fees may apply.
    Some f

  • I tunes wont work

    ugh i call the **** numbers and they put me on hold!!!... i go on itunes and press download ENTIRE music library then i press aply and look at the audio bar that say 291 songs!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! then i press sync and it then says 10 songs!!!!!!!!!!! ***!!!! help!!! im like one step away from taking this ****** thing back to the store

    First a few tips if you have not renabled these items
    Ctrl B puts back the Top Menu
    View > Show Sidebar makes it look and work like itunes 10
    View > Show Status bar puts the grey bar back at the bottom where song stat are displayed
    Click on black arrow in search box and Untick Search Entire Library
    Now to what I think is your issue. Generally if a song is unchecked it will not sync or play as part of a playlist.
    So Select your Music and choose songs view. Is there a column with the tick mark at the top of it?
    If not then click View > View Options and select the checked option this will display that column.
    Do all songs have a tick? If not then select all songs ctrl A and right click. Select Check Selection.
    Try resynching does that work?

  • I tunes wont play songs on computer

    just started happening. everything else seems to be working fine, but if i click on a song it will not start to play. the timer on song remains at 0:00 and thats it. Music seems to work fine on ipod. any suggestions?

    I have the same problem - did you find a fix?
    Thanks

Maybe you are looking for

  • Automatic convert of planned order to purchase requisition with latest info price

    Dear Friends, Our client want to convert planned order to purchase requisition through background job,but they want to pur requisition picking price should be latest info record price. how can i map in to sap,is that possible in T.CODE MDUM, pl help

  • Free Programmed Search Help Question

    I want to use the free programmed search help interface to make my own search help.     But the problem is, I want to embed SAP's search help into my own search help.How can I do that?     Thank you.

  • Howto build e17 the right way with the help of takhis PGKBUILDs

    hello! first of all, thank you takhis for packaging e17! you offer the PKGBUILDs for e17, so i decided to build them by myself to have the newest version, because i need it for the new simply-white theme (0.8.3). with the version from 2008-12-22 i do

  • Cant see my full contacts list

    I have lost approx 300 contacts when I search a contact I know is in there (ie when they call my iohone their name is displayed) it isn;t displayed. Is this a setting problem? Any suggestions much appreciated - ps not backed up to iclous :-(

  • Liveview and android 2.3

    I have recently been gifted a Liveview, and my intention was tomconnect it to my Nexus One, whic has been recently uptdated to android 2.3 gingerbread. Although it connects correctly with liveview, there have appeared a lot of problems that prevent m