I turn my battery percentage on but it still doesnt show, it just turns back off, what do i do?
my battery percentage just stopped showing all of a sudden, so i turned it back on and it doesnt even show, it just turns back off, what do i do?
Is your iPad's storage nearly full?
Check Settings > General > Usage and see how much free space you have left. Is it at least 15% of your total storage space?
Similar Messages
-
i deleted my note by accident i do have notes on icloud. so i had half the note saved but the other half was very important and hard to right. i restored my ipod on i cloud back up but it still doesnt show i put so much time in that anyway to get it back?
How did you delete the Note? If you did a "select all" and "cut", open the Note and shake your iPhone to undo the cut action.
-
The stills in my i movie project will not allow me to edit the duration time. I change it in the clip inspector, but when I click done, it just reverts back to what it was prior to my attempt to change it?
Hi There,
I tried your workflow and some how I am not able to see your issue.
- Will it be possible for you to share your project(where-in you always see this issue) with us. You can upload your project and send the link to maanand (at the rate of ) adobe (dot) com.
- If sharing of project isn' t possible then please share the project details such as no of slides, objects etc.
-Manish
blogs.adobe.com/captivate -
HT5569 what do you do if you put in the correct password but the sign still doesnt show
what do i do if when i put in the correct wifi password but it still doesnt show the wifi sign?
Does the iOS device connect to other networks?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have installed Itunes 10.5 on my PC and I have turned photostream on on my Ipad2 and Iphone. The photos sync fine but they are not showing up on my PC. What's the problem? I can see my photos on my ipad and Iphone. I want to be able to see them on my PC when I take pictures from my Iphone and Ipad. How do I see Photostream on my PC?
You have to install the iCloud control panel for windows, then sign in with you apple ID, and check what you want to sync.
link: http://support.apple.com/kb/DL1455 -
my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help
Hello warhogs17,
After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
my imac G5 turns off on mi and dont want to turn back on at all but nex day tuns on normaly then tuns back off again
It could be several possible issues.
1) Your G5 iMac could be overheating. Depending on which model, you might be able to open the back by yourself (not on an iSight model), and using a can of compressed air, youcould blow the dust out of it.
2) The power supply could be going bad.
3) The hard drive could be going bad.
There could be several others.
If you have the original, came with the iMac when purchased new Install Disks, you can try running the Apple Hardware Test to see if it can determine any hardware issues. It can't always find the problem.
Good luck. -
I dropped my iPhone and i tried to turn it on but it only comes on at curtain times. And it turns back off when I drop it just a little bit. Sometimes it takes like three days to turn back on. How do I get it to work regularly again?? Please help!!!
Seems like there is some physical damage causing an intermittent issue of the iPhone being unable to power on.
You could try a reset:
- hold the home button and sleep/wake button down at the same time
- the iphone will turn off(keep holding) then when the Apple logo appears release both buttons
If the reset fails I would suggest next time it powers on to try and back it up to either iTunes/iCloud then you can try a restore to factory settings or just back up and book an appointment at an Apple Store to have the iPhone evaluated.
All the best -
i have restored my iphone 3gs and put my sim card in it but it will no longer activate. my power button is broken so i cannot turn it off. what can i do to fix this??
Then the SIM may have failed. Try removing and re-inserting it. If that doesn't fix it, you will have to get the SIM replaced by your carrier.
-
My computer was dropped yesterday and it will not turn on past this gray screen that tells me to reboot it, but everytime I reboot it, it just goes back to that same screen and tells me to do it again. Anyone know how to fix this?
When you jar or drop a hard drive when it's operating the heads strike the platters and ruin sectors and the data on them.
Your getting the spinning wheel because the OS has been damaged and/or quite possibly the drive.
You'll first have to determine if it's a hardware issue
Do #3 Hardware Test and #5 Disk Utlity Repair Disk/Permissions here (check the SMART status)
Step by Step to fix your Mac
If the drive is fine and you don't have a recent copy of your data off the machine then also do this
Create a data recovery/undelete external boot drive
Then proceed with fixing the damaged software, likley by #8 your problem will be fixed.
Step by Step to fix your Mac -
My ipad 3 froze and now is not turning back on what should i do?
my ipad 3 froze and now is not turning back on what should i do?
Hi,
I have the same problem. My Ipad 3 was a bit slow/unresponsive, and then it just went blank. I pressed the home button to see if it would come back on, and it was extremely slow, but it did show me the home screen. However, then it went off and wont come back on at all now. I have tried charging, tried the reboot, connected to itunes (which cannot detect the ipad) and nothing is working.
The ipad is only 2 months old, and no damage!
Any suggestions? Thanks -
What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off., What's the deal with the swoosh sound when sending texts? IOS 5.1 needs to have an option to turn it off.
Trax and kirt are correct. I'm pretty good with technology, being an engineer and all, and I can tell you for a fact that this 'swoosh' sound (triggered by a successfully sent SMS) can NOT be disabled from ANY menu in iOS 5. The ONLY way to disable it is to flip the silent switch on the left hand side of the phone. This is extremely annoying for some people (like trax, kirt, and myself). For what we pay for Apple products and, in particular, this phone, we simply didn't expect to have to deal with such annoyances. That's why we're Mac users. Please fix this bug.
I feel like I shouldn't have to say this but it bears repeating: turning off message sounds from the 'sounds' menu does not fix his problem. It still emits the swoosh noise. Whoever suggested this clearly didn't try it because it obviously doesn't work. Who posts a solution to a problem without knowing for a fact that their solution is correct? I find that response condescending because he writer is assuming we're not smart enough to have tried it. In reality, it's vice versa. -
So last night before i went to bed my iphone 4 was charging and it was at 6%.the next morning i woke up the phone said it had still been charging but was still at 6%. so i took it off and it died.now it wont come on.it keeps saying the charging sign. i tried rebooting and the charging sign just shows up. how can i fix it?
sounds like a hardware issue with the battery
1. you can try different chargers if you have any
2. while plugged in, Hold the Home+Power at the same time for about 20 secs, if the apple comes up then release both buttons
3.if that doesn't work you may have to go into Apple store -
My computer won't fully load without turning back off completely. I also tried plugging it in to the charger but it still did not work. What does this mean? What should i do?
It looks as if there's a problem with your GPU. With a Retina machine, that would mean replacement of just about everything, except, perhaps, the flash storage drive.
Print you kernel panic when you go to your Apple Store appointment. I'm betting that it's a faulty GPU but they will be able to diagnose exactly where the problem lies.
Good luck,
Clinton -
i have a life proof case my phone was in a hot tub for 30 sec and it turned its self off and wont turn back on what do i do ??
You can try putting it in bag with rice for about 4 or 5 days and the try to turn it on. The rice will help the drying of the iPhone. Do not attempt to turn it until you take it out of the rice.
If it does not work after the rice, then you know you have to replace the iPhone. This is very likely so after 30 seconds in a hot tub, but do give the rice a try. If you can get a hold of some silica crystals, a better drying agent than rice, that would be good too.
Maybe you are looking for
-
Can't view my user control in the designer (An Unhandled Exception has occurred)
I'm using VS 2012, looking at some code I wrote some time ago. For some reason I cannot view the XAML in the design view, only the XAML view. I'm getting an error that says, "An Unhandled Exception has occurred". I can compile the solution fine, but
-
Implementing KM scheduler in WD application
HI All, Can anybody guide me on KM schedulers and how to implement the same in WD applications. We have a WD application where we are creating PDF forms. Now we need to schedule the process and want to run the job at a regular interval of time. Is KM
-
Is it Possible to Preview Sound While Scrubbing the Timeline Using Hotkeys?
If I have a sound in my timeline, I can scrub through the timeline by dragging the red box and it will preview the sound that plays on every frame. However, I have hotkeys set to scrub through my timeline (, & .), and when I use them, the sound does
-
Problem to connect database from Developer 6i
I have downloaded Developer 6i from oracle.com before that, I have already downloaded 9i database default_home directory is c:\orant. while i was installing develper 6i it was installed with forms_home, c:\orant\forms. I was using the forms builder t
-
Business catalyst API integration for products, customers, and orders?
can a BC site be used with a API program for feeding products, customers, blog posts, etc? Thanks, Michael