I turned my iphone off to update and its stuck in the update screen!

I turned my iphone off to update and its stuck in the update screen its been 12 hours what can I do???

IF ios 8 is not working properly in iphone 5.,!! Then i should not update my iphone 4s to ios 8..!! If i do so that will be blast hahahah

Similar Messages

  • My iphones has frozen when updating and now is on the loading screen and i cant turn is off or restart it, help please? i need my phone

    help please, my iphone has frozen when updating and now its stuck on the loading screen, i have tried holding the buttons down : didnt work, i have taken the sim out : didnt work.... i really need my phone to be working i dont know what to do.. help please?

    http://support.apple.com/kb/TS1538
    http://support.apple.com/kb/HT1808

  • I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iPhone without iTunes an now i don't wad then it turned itf off and now its stuck on the black screen with the loading sign. So please how can i turn my phone on again

    I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iphone without iTunes and then it turned it self off and now its stuck on the black screen with the loading sign. So please how can i turn my iPhone on again?

    I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.

  • When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?

    When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?

    Anna...
    Could be the graphics card.
    Run the Apple Hardware Test

  • Hi my friend gave me his old Iphone 1 today and its stuck in the apple boot logo. Sometimes it automatically shuts off but about a second later it comes back on. The home button and the power button seem to not be responsive. Im hoping to restore it.. Thx

    Hi my friend gave me his iphone 1 today and its stuck at the apple boot logo. Some times it automatically shuts off but about a second later is comes back on. The home button and the power button seem to not be responsive. Thanks for the help.

    You bought a used iPhone. Amazon is not an authorized supplier of iPhones, nor are any of the 3rd parties that sell iPhones there.
    You can make an appointment at the genius bar and have it looked at.
    If you are very very lucky, it is still under warranty and it wasn't opened or otherwise tampered with before you bought it. In which case, Apple will replace it under warranty.
    If it's not under warranty, they will replace it for $199.
    If it has been opened or tampered with, they won't touch it.

  • HT4623 I am trying to complete the iOS7 update and it stalls on the updating of iCloud settings....if I skip this step what will happen?

    I am trying to complete the iOS7 update and it stalls on the updating of the iCloud settings, if I skip this step what will happen?

    Same issue here....somebody help?

  • Tried updating my phone to iOS 5 and it got to the restore screen then locked up and now its stuck on the itunes screen. how do i fix it?

    tried updating my phone to iOS 5 and it got to the restore screen then locked up and now its stuck on the itunes screen. how do i fix it?

    http://support.apple.com/kb/HT1808

  • I have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable

    i have a iphone 4s and its stuck at the apple logo to comes up then fades away and every time i try to restoring with iTunes it gives me a 4013 error i changed the charging port/dock and the battery ive also used a different computer and cable

    See: http://support.apple.com/kb/TS3694#USB
    However, the most likely reason is your self-repair of a device that is only factory repairable broke something. Note that Apple does not sell replacement parts, so whatever parts you used were not made by Apple's supplier and are of questionable quality.

  • My home button and lock button are both unresponsive. and its stuck on the settings pages.

    both home button and lock button are unresponsive but if i press both at the same time i can still take a pic. but pressing them individually does nothing. and its stuck on the settings page and i can go anywhere on the settings page but nowhere else. help please??

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have a macbook air and its stuck on the apple logo

    its o osx 10.8.4 its 126gb 13 inch screen and its stuck on the apple logo

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • Was looking at app and its stuck on the page wont move help

    can someone please help im desperate was looking at a game on the apps download and its stuck on the page cannot get it to move even tried downloading it and still wont go away

    iOS Reset -
    Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.

  • I bought an ipad from a friend but he doesnt know his apple id and password and is stuck at the activation screen what do i have to do to get it unlocked

    i bought an ipad from a friend but he doesnt know his apple id and password and is stuck at the activation screen what do i have to do to get it unlocked

    If you are trying to activate an iPad or iPhone and it is asking for the original owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. No must contact the original owner to get permission to use the device. Are you sure the "friend" who sold you this iPad was the primal owner? If you cannot contact the original owner return the device to "your friend" and get a refund. You will never be able to activate the device and no one can help you do it.

  • Why does my iPod keep crashing and get stuck on the apple screen?

    My iPod has crashed and gotten stuck on the apple screen multiple times now, I think three or four times. I take really good care of it and charge it alot. It's a generation 5 32 gig, but I have no idea how to fix it! I really want to save my pictures and contacts and whatnot so it is really annoying when it happens!!! Any help would be considered! Thankyou for any input!

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                              

  • I have an ipod nano and its fall down , the inside screen is broken..... can APPLE replace this(inside screen)???!

    i have an ipod nano and its fall down , the inside screen is broken..... can APPLE replace this(inside screen)???!

    Hello Alia A,
    Sorry to hear about your iPod nano screen.  I recommend reviewing the following link for service options (you can update the country selection to your location after accessing the link):
    Service Answer Center - iPod
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I turned on filevault but after restarting i got stuck at the login screen.

    I turned on filevault but after restarting i got stuck at the login screen. my trackpad is working but not clicking. i tried random keys and finally got to enter my password via keyboard. now i am afraid of shutting my mac , what to do?

    There is a known problem and I am having exact same issue. Power cycling and internet cache does not fix the issue. When a connection to a server fails it has nothing to do with caching issues. It is a network issue on AT&Ts end in a localized region. It works in multiple towers in various locations but does not work where I am. I have reported this to AT&T.

Maybe you are looking for

  • PreparedStatement space and empty String

    Hi, I have this problem: PreparedStatement bookedQtyPS = null; String qry="SELECT * from djwsearch where djwitem=?; bookedQtyPS = conn.prepareStatement(qry); if(item.equals(""){ //item is an empty String bookedQtyPS.setString(1," "); // I set space i

  • Flash SWF not appearing in RH

    I am using TCS 4 with FM 12 and RH 11. I have an animation built in Flash and published to a SWF file. The animation is added to a FM doc. Publishing to PDF shows the animation as expected. I link an RH project to the FM book and the animation is mis

  • Why I dont have facetime to my ipad mini

    Why I dont have facetime to my ipad mini

  • Bulk collections

    I have code like this FORALL i IN arr.first..arr.last LOOP update table set col=val where id=arr(i).id; insert into table values arr(i); END LOOP; Is it possible to do two(means more than 1) dml operation between forall loop. I get error in insert st

  • Focusing userObject of a Node

    Hi everyone! I have the following problem: my JTree has DefaultMutableTreeNodes. Every userObject of a node is a JPanel with a JLabel and a JComponent. Now I want to put the focus on the JComponent !!! it works, by clicking on the JComponent, but not