I turned my MacBook Pro and got an error message with lines and lines of code and then it turns off
I turned on my MacBook Pro and got an error message with several lines of code and then it turns off
Were you able to see any of the error codes? Have you tried resetting NVRAM (booting while hold cmd+option+p+r until the second chime)?
Similar Messages
-
While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store.
The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
Good luck,
Clinton -
I deactivated Acrobat 9 Pro from a Windows 8 laptop and installed it on a new Windows 8 laptop and got the error message "Invalid Serial Number." I am entitled to this installation, can someone help?
I see that the number in my Adobe Account is a MAC serial number – I purchased both the Mac and Windows versions of the program. I tried to enter the serial number of the Windows version into my account and it says it’s already registered. But when I installed the Windows version on a Windows computer I got the invalid serial number message. They have two different serial numbers! Can you help me with this?
-
I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.
"/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
(with thanks to Yuengdog1983):
This issue may be a result of the Computer Name being left empty:
Open System Preferences and choose Sharing.
Enter a name for your computer.
Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print! -
Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
This in SharePoint 2013 Farm.
What should I do?
1- I did a DisableLoopBack and set the value to "1".
For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
P.S. I fixed this issue once, long time ago and I forgot how it ... be done.Hi,
For troubleshooting your issue, please take steps as below:
1.Go to IIS, make sure the web application is actived.
2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
Reference:
http://support.microsoft.com/en-us/kb/926642/en-us
http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
My iPad is not recognized by Finder or iTunes when it is plugged into the computer. i ran the Restore sequence and got an error message stating "The iPad could not be restored. An unknown error occurred (1611). Can this be fixed?
iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes
Security software issues covered in: iTunes: Troubleshooting security software issues - http://support.apple.com/kb/TS3125 -
Wanted to sync up my new IPhone4, and thought that I should make sure I had the most up to date version of ITunes on my desktop first. Tried to get on site, and got an error message saying; "The folder ITunes is on a locked disk or you do not have write permissions for this folder." Cannot get on ITunes at all now. Help! Thx.
In my case its a new computer the old one was stolen and the time machine disk did not work for a restore but did for copying the info to the new mac
-
Tried to update my iphone 4 and got an error message. Now I can't update my phone or even restore it!!
Hi phaniemae528,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...
Now iTunes will not recognize my phone as a device...
-
When trying to sync my iPhone/iPad with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device". How to I adjust the access privileges?
Hello magestecal,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you're getting a permissions error when trying to sync your iPhone, I'd like you to please follow the steps in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Take care,
Alex H. -
I recently tried to update iTunes to 12.0.1 and got this error message:
The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link library iAdCore.dll.
After that, I get: iTunes did not install properly. Reinstall iTunes.
I tried downloading iTunes again (without uninstalling it) and it won't download.
Any suggestions?Thanks so very much, I have been looking for an answer to this for
almost a week and just thought i'd look again and in 2 minutes my iTunes opened YIPPEE
I must have installed deleted everything in order at least 15 times
Is there anyways this cane get pinned to stay at top as it works and save people ploughing
through post after post which is just asking the same question.
Off to back up and I Cloud back up and see how it works without sidebar
again thank you -
I was trying to back up my phone and got an error message and cannot use my phone at all... There is a picture of an itunes icon and a cord. I cannot get to my phone or any settings or icons.... HELP. I'm not sure of my operating system or which iphone 4 it is....
Open current iTunes on your computer. Connect iPhone to the computer with USB Cable. Follow directions or click the Restore button of iTunes.
-
Hi. I recently got a new computer and transferred all my files across using TimeMachine. Whenever I try to sign into any CC program (including CC) the program instantly shuts down and an Apple error message comes up. I have uninstalled and reinstalled CC twice with no avail and deleted every Adobe product on my computer and nothing is working.
I have seen similar discussions before... transferring does not work, you must install
Discussions of RE-installing
-http://forums.adobe.com/thread/1408331?tstart=0
-http://forums.adobe.com/thread/1398961?tstart=0
-and http://helpx.adobe.com/creative-cloud/help/install-apps.html
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html -
Tried to buy Aperture 3 and got an error message Aperture can’t be installed on “Macintosh HD” because Mac OS X version 10.7.2 or later is required. You can update Mac OS X using Software Update. Problem is, I had already updated my IMac to Lion OS
iPhoto 9.3 requires OS X 10.7.4 now. You can use your actual version of iPhoto or upgrade to Lion (or wait to Mountain Lion)
-
I just tried to download and install an update to Creative Cloud and got an error message that the operation was unable to be completed. Now I cannot access Creative Cloud at all. Please advise.
Run the cleaner tool and reinstall everything from scratch.
http://www.adobe.com/support/contact/cscleanertool.html
Mylenium
Maybe you are looking for
-
My iPhone 5s's voice memo app is glitching - how can I fix it?
I've tried resetting my phone, plugging it into my laptop, force quitting it, and nothing has worked. When I open the voice memo app, all my voice memos start scrambling frantically, then it closes itself, then they all disappear. Over and over again
-
PLease help me in wrirting this query
Hi all, i want to write a query using standard emp table.But output required is like deptno ename 10 smith alen mark 20 ram hanuman Thus if deptno is same for some employees it should be printed once only Any help is highly appreciated
-
How do i run 4 different firefox profiles simultainously?without them having no memory of themself.
i currently have 2 different profile running now with no memory of themselves so i can play online games. i need to run 2 more but the last time i tried i messed it all up,can u help?
-
Hi, I am Using Abode Flash Player 11 ActiveX 11.1.102.63 and it Crashes several times a day on FireFox. It has never done that before. How can I fix it Please and Thank you. Confirm you have received this Message and e-mail me back Please. Thank you
-
My computer is not reading my ipod and its not showing in itunes
my computer is not reading my ipod and it does not appear in itunes