I typed in data into the highlighted text box, and then tried to print my form. However, when printed, the copy only showed a portion of my answer. Is there a way to expand Adobe Reader's highlighted text to show my full response, or should I make my re

I typed in data into the highlighted text box, and then tried to print my form. However, when printed, the copy only showed a portion of my answer. Is there a way to expand Adobe Reader's highlighted text to show my full response, or should I make my responses only as long as the highlighted portion allows?

While printing any pdf file it will print the visible text only. To overcome this, the form needs to be dynamic so that it expands in layout while entering more data. Usually dynamic forms are developed by Adobe LiveCycle Designer.
~Deepak

Similar Messages

Is there a way to add Adobe Reader directly to my website for legal documents?

Is there a way to add Adobe Reader directly to my website for legal documents? It is on Wordpress. [link removed by moderator]

Technically, you CAN embed a pdf so that it opens within the page. Use <embed src="http://yoursite.com/the.pdf" width="500" height="375">
But you'll want to test it with all browsers (assuming this is something you are trying to accomplish).

How do I find the report server name, and then run paper report from forms?

How do I find the report server name, and then run paper report from forms?
I am having a problem running report 9i from forms 9i (see below thread). How do I find out the name of the report server? I checked my C:\ids\reports\conf directory but don't see anything that gives me the name of the reports server. I also don't have a iashome directory.
Also, I just want to run the paper report (not the web version).
Thanks.

Hi,
please read teh Forms / Reports integration paper in teh Collateral section for Oracle9i Forms at otn.oracle.com/products/forms
In summary, you have to create an external Reports Service that you can then give a name.
Frank

I closed apps following the "swipe up" method and it appeared all were closed. However, when I checked in "Apps" it indicated 13 more apps were still open. How do I close them?

I closed apps following the "swipe up" method and it appeared all were closed. However, when I checked in "Apps" it indicated 13 more apps were still open. How do I close them?

Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha

I Was updating my ipod touch and it was all going ok until the white apple with the bar came up and then itunes crashed out, it is still on with the white apple and i cant turn it off please help me

Was updating my ipod touch and it was all going ok until the white apple with the bar came up and then itunes crashed out, it is still on with the white apple and i cant turn it off please help me this has been like this for 30 minutes

Did you try to reset by holding the sleep and home button until the Apple logo comes back again?
If this does not work, try to connect again in recovery mode: http://support.apple.com/kb/HT1808

Changing a PDF with a text box, and then flatten the text box onto the underlying PDF before sending the document out.

I download PDF documents from municipalities, often and from numerous municipalities.
They have a scanned image of a form that I need to fill out,
I enter my contact info as a text box onto the form, along with other information,
but when I save the document, there seems no way to flatten the fields so that the person I send the document to has a true PDF and cannot change the document.
They could delete one of the text boxes or change the text in the box (by mistake),
which could case some major complications.
How do I flatten the document, so I can send it back to the municipalities as a PDF that cannot be changed.
I am using Acrobat X Pro, on windows XP machine

I doubt you could fix this. Generally a "garbled" file is considered unusable for copying, and that's that. If a PDF uses random mappings instead of standard ones it looks fine on screen, but text extraction is impossible.
Short of converting every page to bitmap and OCRing again.

Is there a way to force Adobe Reader to grab the sign on ID for a digital stamp?

I work for a state Agency and we want to use digital stamps as our signatures on our internal documents. I have created the form in LiveCycle and I know that in Adobe Reader by default the stamp will use the person's sign on ID for the stamp and then the person adds their name and other information.
However, if the person right clicks the stamp, and edits the Identity and puts in another sign on ID number, such as their supervisor's and stamps the document, there is no way to tell that both of those stamps, with different sign on IDs and names, were created by the same person.
If there is a script I can enter in LiveCycle, that when the form is opened in Adobe Reader, that would lock the Identity field of a stamp created in Adobe Reader from allowing a change to the sign on ID, then that would solve our problem and maybe the problem for other state agencies wanting to follow suit.
The digital signatures are even worse. I made one in my name, my supervisor's name and my dog's name, attached them all to a document, validated all the signatures and they look absolutely authentic. Why would Adobe make digital signatures like that? If we could just find some evidence within the data showing that all the signatures were applied by the same person or on the same computer, then we could use them. But the stamps at least grab that unique sign on number that we use and applies it to the stamp if the user doesn't alter it.
I'm on a time crunch as we hoped to launch this after the first of the year but our attorneys are saying, "uh, uh" until something can be done to prevent fraud. We have over 3,000 people in our agency so EchoSign would be out of the question.
I'd appreciate any suggestions.

You will not get what you need using stamps, especially if you ever want to use dynamic XFA forms.
The digital signatures that were signed with a self-signed digital ID won't fully validate unless the user chooses to trust the corresponding digital certificate first. You should only trust a digital certificate if you trust its source. The problem is using self-signed IDs will be difficult to use on the scale you're talking about.
Digital signatures are the best approach for your needs. They can provide both nonrepudiation of document origin as well as document integrity. You just have to figure out how to implement a solution you can afford.
You agency can become its own certificate authority and issue certificates to its employees. You'd just have to find a way to implement and manage such a system.

Is there a way to set Adobe Reader X and Internet Explorer 10 integration on and off per website URL?

We have a Citrix environment where some web applications require pdf browser page integration, and others need the .pdf to open in reader itself.
thanks for any input.

Thank you t quinn for your reply as I do really appreciate the help.
I don't quite understand what your suggestion was and before I try to figure it out and play around with numbers, I thought I should clarify further. When i wrote I want to paste the content into the cell and have it limited to 100 characters I was mis-spoken. I actually have all the content already in the columns in a spreadsheet and would now like to just limit some of the columns to hold only 100 characters in a cell so that when its a CSV file it will be accepted to the program I'm trying to upload it to.
SO does that change the way you can answer my question?
Is there a way to just limit the content currently in a spreadsheet to 100 characters per cell?
Kindly

Can I switch out a hard drive for an SSD without having to clone the existing hard drive, and then install Yosemite from an USB Boot Drive onto the new SSD?

Can I simply replace a hard drive with a new SSD and just install Yosemite from a USB boot drive onto the SSD? I recently bought a used MBP and it has absolutely no files on it except for the OS, and so I'm assuming I don't need to clone the current hard drive as I can just reinstall the OS onto the new SSD.

Honey_Revenge wrote:
Thanks.
Just a quick follow up question, is formatting the SSD with HFS+ done in Disk Utility?...
It's possible that the SSD will be set up for use on a PC, which means it will have a Master Boot Record partition table rather than a GUID Partition Table, which is what Yosemite needs. In Disk Utility, select the SSD and click the Partition button. Create a new Partition Layout and click the Options... button at the bottom. You'll likely see MBR is selected. Choose GUID instead and Mac OS Extended (Journaled) for the Format.

Converting images that include text boxes and callouts in FM

Hello,
I'm on a new project (TCS 3.5, RH 9, FM 10) that requires me to include text boxes and lines (callouts) on top / in front of many of the images in FM. The reason they are not allowing me to add the text/callouts to the images themselves is because they want to keep the text boxes editable for translation.
The problem: After importing into RH, these images have white borders on all sides that they didn't have previously and I can't figure out what's causing it.
When I remove the text/callouts from over the images in question, then reimport, the problem resolves and the white borders disappear. When I view the original image files, there are no borders present. After I import, I view the image file in the RH folder and it does include the border. (So the border is on the image itself.)
Presently, the Object Properties for the images are as follows:
Offset From:
Top: 0.0"
Left: 0.0"
Border Width: 0.015 (which is lowest FM allows me to set... I get an error message when I try to enter 0.0)
Anchored Frame settings:
Anchoring Position: Below Current Line
Alignment: Left
Cropped/Floating: both unchecked
I've tried many different variations and tests; probably too many to list here. In short, the "border" appears when there is text/callouts on the image and it disappears when I delete the text/callouts. I was hoping that someone may have had a similar issue. Please let me know if you need more info to troubleshoot and thanks for reading.
Best,
Tom

I had the same problem with callouts, but my solution was to add them directly to the image, so that doesn't help you.
Another things you can try to is ensure that the edges of the image do not touch the edges of the anchored frame. Make sure there is a bit of white space. I don't know why, but when any of my images touch the anchored frame, the conversion looks awful.
Also, my images appeared best in Robohelp when I set the properties for the image in Robohelp as follows:
File > Project Settings
Import tab
Edit conversion settings for FrameMaker documents
On the left side, select Image
Set Width and Height to 0pt (this ensures that the image is not resized)

What's the difference between boxing and unboxing?

What's the difference between boxing and unboxing, I'm a bit confused?
Is autoboxing the same as boxing?
This is what I know so far:
-This is boxing, i think:
int []arrayset = {1,2,3};but I don't understand what unboxing is, can someone explain it to me.

I did little research, but please correct me ifI'm
wrong:
Is this similiar to unboxing:
System.out.println(intArray[0] + intArray[1] +
intArray[2]);
Only if intArray is declared asInteger[]
intArray ...Then the Integers at intArray[0] etc are unboxedinto
int primitives before adding.Did you try that before you posted it? Autoboxing is
applied only to an individual primitive/wrapper.
Arrays and collections aren't subject to
autoboxing/unboxing. Basically, the compiler will
fill in constructs such as Integer.valueOf() for you,
it doesn't go as far as generating loops and new
arrays for you
OP, as Peter said, the difference between boxing and
unboxing is merely one of direction. Autoboxing wraps
a primitive up for you, auto-unboxing extracts the
primitive from a wrapperAm fully aware of that, the OP's example contained references to array elements but it was not clear whether that array was declared as Integer[] or int[], hence my answer.
And just for the recordInteger[] intArray = new Integer[] {1, 2, 3}; // autoboxing
System.out.println(intArray[1] + intArray[2]); // autounboxing
// while ...
int[] intArray = new int[] {1, 2, 3}; // no boxing
System.out.println(intArray[1] + intArray[2]); // no unboxingis what i meant.

Adobe Reader 9 highlights text when scrolling in terminal server

Running a terminal server with WIndow 2003. Have Adobe 9 Reader installed. When a pdf is opened, it will look correct. However, when one uses the scroll bar on the right to see more of the document, text can be highlighted and change colors constantly when scrolling.
Test it outside of terminal server and it works fine. This issue did not happen with other versions of Reader. I have attached two samples one clean and one highlighted.
Any help is appreciated

Very cool. Thanks for the info!
Date: Fri, 16 Oct 2009 10:42:24 -0600
From: [email protected]
To: [email protected]
Subject: Adobe Reader 9 highlights text when scrolling in terminal server
Okay. Here is what I found. These settings are changed\saved under the User settings in the registry. Here is the key the changes are made to:
HKCU\Software\Adobe\Adobe Reader\9.0\Originals
When "NONE" is selected from Adobe Reader - Edit - Preferences - Page Display - Rendering, three DWORD values are added to the above mentioned registry key. These are:
Value Name - Value Data
*bAntialiasText - 0
benableDDR - 0
iAntialiasThreshold - 12*
I have added these lines to a login script that adds the necessary DWORD values to default the "Rendering" to NONE.
*reg add "HKCU\Software\Adobe\Acrobat Reader\9.0\Originals" /V bAntialiasText /T REG_DWORD /F /D 0
reg add "HKCU\Software\Adobe\Acrobat Reader\9.0\Originals" /V benableDDR /T REG_DWORD /F /D 0
reg add "HKCU\Software\Adobe\Acrobat Reader\9.0\Originals" /V iAntialiasThreshold /T REG_DWORD /F /D 12*
Cheers!
>

Powershell script - how to read a registry hive and store the value in text file and then again read the text file to write the values back in registry

Hi All,
powershell script Method required to read a value from registry and then taking the backup of that values in some text file.
For example the hive is
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment\Path
and under path i need to take back up of values in some text file and then put some value in the registry after back is taken in text file.
Also how to read the text file values so that we can again write to registry hive back from the back up text file.
Your help is much appreciated.
Umeed4u

I think you need to read this first:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/a0def745-4831-4de0-a040-63b63e7be7ae/posting-guidelines?forum=ITCG
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Is there a way to expand the text area of the login/lock screen for the warning message?

I put our company's standard warning message in the Security & Privacy system preference ("Show a message when the screen is locked.") and it overflowed the allotted text area for the warning message text on the login screen and lock screens. It seems that the area allows about 250 character messages and I need to provide about 500 characters. Is there any way to expand the text area allotted for this purpose?
Bob Reed

To be a little more specific about the challenge I'm facing, I want to increase the allotted text space for the field I've outlined in the attached image. Seems like there ought to be a NIB file that could be edited to accomplish this task:
I would appreciate any advice on which file should be edited to expand the text field.
Bob Reed

What is the best way to create a read more/collapse text box on the homepage of a site?

What is the best way to create a read more/collapse text box on the homepage of a site?

I figured this out by using a lightbox. I set the trigger at the top of the box, hid all initially and added a close button. In the box that would have linked to the first thumbnail for the lightbox, I added a text box that said "read more"

I typed in data into the highlighted text box, and then tried to print my form. However, when printed, the copy only showed a portion of my answer. Is there a way to expand Adobe Reader's highlighted text to show my full response, or should I make my re

Similar Messages

Maybe you are looking for