I unable to access SDN from my office network through Internet Explorer.

Hi,
I unable to access sdn site from my office network through Internet Explorer.
I can able to access using navigator or firefox..
Any setting need to be done.
Cheers,
Sam

Hi Sam,
check you connection settings in IE specially the proxie settings.
Regards
Bernd

Similar Messages

Unable to access hosts from outside local network

I have set up a few different name-based virtual hosts for a small client. DNS is set up correctly; sites can be accessed internally; everything is working OK.
However, none of the virtual hosts can be accessed from outside their internal network. I know for a fact that DNS is set up correctly as dig tells me so. Firewall port 80 is open and everything (mail, vpn, etc.) else is working fine.
I've looked over the httpd config files many times and just can't seem to find anything wrong. Any suggestions on where to look for problems?
Xserve Mac OS X (10.4.5)

What if you swap out your Apache config for a moment with the default one? Do you have reason to think that it's something in your name-based virtual host settings?
Can you access a web site from the outside if you only have the default config on there, accessing it maybe via IP address?
If so, we'll probably need to know more about your virtual host setup in order to troubleshoot this any further, considering you have other services running and accessible on the machine.
Are you getting any errors? What happens when you try to reach one of the websites? Have you looked at your error log for any of the sites?

Unable to access values from database in login page..

Hey all,
Friends I have a login.jsp page and I want if i enter username and password then it will be accessed from database and after verifying the details it will open main.jsp.I made a database as "abc" and created DSN as 1st_login having table 1st_login. But the problem is that I am unable to access values from database.
So Please help me.
Following is my code:
<HTML>
<body background="a.jpg">
<marquee>
                    <CENTER><font size="5" face="times" color="#993300"><b>Welcome to the"<U><I>XYZ</I></U>" of ABC</font></b></CENTER></marquee>
          <br>
          <br>
          <br>
          <br><br>
          <br>
     <form name="login_form">
          <CENTER><font size="4" face="times new roman">
Username
          <input name="username" type="text" class="inputbox" alt="username" size="20" />
          <br>
     <br>
          Password
          <input type="password" name="pwd" class="inputbox" size="20" alt="password" />
          <br/>
          <input type="hidden" name="option" value="login" />
          <br>
          <input type="SUBMIT" name="SUBMIT" class="button" value="Submit" onClick="return check();"> </CENTER>
          </td>
     </tr>
     <tr>
          <td>
          </form>
          </table>
<%
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection connection = DriverManager.getConnection("jdbc:odbc:1st_login");
Statement statement = connection.createStatement();
String query = "SELECT username, password FROM 1st_login WHERE username='";
query += request.getParameter("username") + "' AND password='";
query += request.getParameter("password") + "';";
ResultSet resSum = statement.executeQuery(query);
//change: you gotta move the pointer to the first row of the result set.
resSum.next();
if (request.getParameter("username").equalsIgnoreCase(resSum.getString("username")) && request.getParameter("password").equalsIgnoreCase(resSum.getString("password")))
%>
//now it must connected to next page..
<%
else
%>
<h2>You better check your username and password!</h2>
<%
}catch (SQLException ex ){
System.err.println( ex);
}catch (Exception er){
er.printStackTrace();
%>
<input type="hidden" name="op2" value="login" />
     <input type="hidden" name="lang" value="english" />
     <input type="hidden" name="return" value="/" />
     <input type="hidden" name="message" value="0" />
     <br>
          <br><br>
          <br><br>
          <br><br><br><br><br>
          <font size="2" face="arial" color="#993300">
     <p align="center"> <B>ABC © PQR</B>
</BODY>
</HTML>
and in this code i am getting following error
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:93: cannot find symbol_
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:93: cannot find symbol_
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:94: cannot find symbol_
C:\Project\SRS\build\generated\src\org\apache\jsp\loginjsp.java:95: cannot find symbol_
4 errors
C:\Project\SRS\nbproject\build-impl.xml:360: The following error occurred while executing this line:
C:\Project\SRS\nbproject\build-impl.xml:142: Compile failed; see the compiler error output for details.
BUILD FAILED (total time: 6 seconds)

As long as you're unable to compile Java code, please use the 'New to Java' forum. This is really trival.
To ease writing, debugging and maintenance, I highly recommend you to write Java code in Java classes rather than JSP files. Start learning Servlets.

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I fould a hack that makes the sites think you have the latest (Intel) version of Flash installed. So I installed it & it works with Firefox, TenFourFox & Safari. Here's the info.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
 Cheers, Tom

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

I am from India using my iphone4 with Vodafone and firmware version 5.0.1(9A405). I am unable to access 3G from my device as the CELLULAR DATA NETWORK option in the settings is missing. Any methods or options for fixing the same????

HT4623 unable to access itunes from ipad

I am unable to access itunes from remote devices which include my ipad and iphone. When I try to purchase apps etc, I am advised "Cannot connect to itunes Store"

Hello marie-louise,
I recommend taking a look at this section of the article Can't connect to the iTunes Store found here http://support.apple.com/kb/ts1368.
Troubleshooting on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure that your iOS software is up to date by connecting your iOS device to iTunes and clicking on Check for Update in your device's Summary page in iTunes.
Check and verify that you are in range of a Wi-Fi router or base station. If you are on a 3G capable device, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to 3G, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Check to make sure you have an active internet connection. You can check the User Guide for your device for help with connecting to the internet.
Check to make sure other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the internet.
Try resetting (turning off and then on again) your Wi-Fi router
If the issue persists, see troubleshooting Wi-Fi networks and connections.
Note: All iPhone, and iPod touch models support 802.11b/g Wi-Fi networks. In addition, iPhone 4, and iPod touch (4th generation) support 802.11n Wi-Fi networks (2.4 GHz only).
And if that does not resolve the issue take a look at this article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
All the very best,
Sterling

Unable to open login page through internet explorer

Hi,
Configured Reverse proxy external tier. We are able to access login page through Mozilla but unable to access through IE8.
Raised SR, but they have reverted saying it's browser problem & not in their scope.
Please help for the following error message when redirecting to login page.
You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed.
Thanks in advance

Please post the details of the application release, database version and OS.
Configured Reverse proxy external tier. We are able to access login page through Mozilla but unable to access through IE8.
Raised SR, but they have reverted saying it's browser problem & not in their scope.Do you meet the requirements in these docs?
Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
Recommended Browsers for Oracle E-Business Suite 11i [ID 285218.1]
Please help for the following error message when redirecting to login page.Can you find any errors in the application/apache/database log files?
You are trying to access a page that is no longer active.
- The referring page may have come from a previous session. Please select Home to proceed. Please see if these docs help.
Session Error Raised Direct After Login when Using Two-Letter Domain Segments [ID 420573.1]
Login Issue via Internet Explorer after EBS Upgrade from 11.5.10.2 to 12.0.4 [ID 828534.1]
R12 Login Fails When A Cookie Using Comma Separated Values Is Set First [ID 946807.1]
R12: Error "You are trying to access a page that is no longer active" When Attempting to Access Through Internet Explorer [ID 968839.1]
Thanks,
Hussein

Unable to use all the feature of my email service (Juno on the web) like; font size/color, bolding, italics, highlighting etc why? Those features work through Internet Explorer but not Firefox.

When I go to my Juno on the web through Firefox, I am unable to use the tool features such as:
Font size / Color
Bolding
Italics
Bullets
Highlighting
just to name a few. Yet when I bring it up through Internet Explorer these features work, plus the way Firefox reads my Juno the tabs are distorted (the page is not formatted correctly, I contacted Juno they said I should contact my modem company AT& T they said no so you are my last resort.. Please help resolve my issue, THANK YOU in advance for assisting with this matter.

It is up to Juno to enable Midas, the Rich Text Editor which is built into Firefox, with one little line of code on every web page that has RTE for IE. There's nothing that you can do to turn that feature on your self, it has to be coded on each web page that has Rich Text Editing.
http://www.mozilla.org/editor/midas-spec.html <br />
http://kb.mozillazine.org/Midas
Their ignorance probably lies with their staff programmers only knowing how to do it for IE ''(their training and certificates are probably from the Microsoft cabal)'', and not realizing that Gecko and WebKit apps each have their own Rich Text Editor's, which require their own small line of code to enable those Editor's.

After upgrade to firefox 5 my webmail inbox has message stating,you have undefined mails in your inbox,but there seems to be no way to access these mails.Works perfectly well with internet explorer.

system goes to talktalk website as normal,click on my mail,then on login,and up comes message you have undefined mails in your inbox.normally the message would say ,you have X No of new mails.No matter what I try I cannot gain access to my messages.If i use internet explorer i get my messages no problem

I found my own solution to this one after many more hours of frustration. I found that there was a toolbar applet installed in Internet Explorer that started its own private JVM, and that JVM was being seen by the plugin code for 1.3.1_07. Apparently there was some conflict between what the plugin code expected and what that private JVM (not sure what version it was, the code had no mention of it) had to offer, which caused the crash dialog. Uninstalling the toolbar (and its parent application) solved the problem. I may do further testing to see if there are any plugin versions that do work with this particular applet.
It is also still a mystery why this problem only cropped up after installing and uninstalling 1.4.x version of the plugin, but I didn't keep close track of the whole sequence so it may have been coincidental.
Hope this helps someone.

Unable to allow traffic from remote office - Cisco RV220W

Hi there,
I have just bought the RV220W Cisco router firewall because my DLINK-1600 got broken and now I am unable to allow access to the machines located behind this router from the machines located at a remote office. Any help would be much appreciated!!
This is the situation:
1. Two remote offices A and B connected by a VPN tunnel (this connection is managed by an external provider and it is properly functioning)
2. IP range A office: 192.168.236.0/24
3. IP range B office: 192.168.237.0/24
4. Office A: CISCO RV220W router/firewall (the one that I´ve just bought as the old dlink has broken). This RV220W is connected to a cisco router (managed by provider) that is the one with the VPN tunnel to the other office. The CISCO router does not do NAT. On the other end (Office B) there is another CISCO router managed by the provider.
5. Everything was working smoothly until our old router/firewall got broken and that is when I bought the rv220w. I have set up the CISCO RV220W at office A and the machines can ping the machines located at office B and can browse the internet, i.e., the traffic going out is OK and in that sense everything works smoothly.
6. The problem is that the machines located at office B cannot access the machines located behind the CISCO RV220W and I know it is a problem of the firewall as if I capture traffic coming from office B, I can see that it is dropped by the CISCO RV220W.
7. I have tried to enable an access rule in the firewall to allow traffic from office B (see picture below) but it does not seem to work. In the field, Send to Local Server (DNAT IP) I have entered the WAN IP of my router (you cannot leave it blank) … this rule does not work at all. I think that is not properly configured but I don´t know how to do it.
8. As you see, the problem is that I don´t know how to set up a rule to allow specific traffic coming from the WAN (traffic from remote office – 192.168.237.0/24) to the LAN at office A - 192.168.236.0/24.
In the old router/firewall I just had to create a rule specifying the source interface (WAN) and network (Office B) and the destination interdace (LANOfficeA) and network (Office A). It does not seem that here I can do the same. i mean, you always have to point to a server ip inside the LAN??
I know it has to be a very easy thing to do but at this moment I am completely stuck. If anyone can give me some advice would be great.
Thanks a lot for your help in advanced!
Eva

Hi Eva, the default inbound policy cannot be changed. It will block all inbound traffic. To my knowledge there is not a way around this. Access rules are the only way to 'poke' a hole through the firewall but as you note, it is for a specific host. Values such as .0 and .255 do not work.
-Tom
Please mark answered for helpful posts

Why am I unable to access my new Post Office Account they state that you will not allow and I will have to use Internet Explorer why?

I have just opened a new account with the Post Office but I am unable to access this on the net. Telephoned Customer Services but say that I will not be able to access through Firefox and will have to use Internet Explorer. Going back to Internet Explorer is not something I want to do because I like Firefox, please explain why Firefox is blocking access if this is true. I have clicked 'allow' but it made no difference and the only message coming up is "timed-out" when I have been much less than 5 mins putting security details. Please advise. Paula

I doubt if Firefox is blocking access. More than likely, that website is made to use ActiveX, or other proprietary Microsoft code, that only Internet Explorer can handle.
If you post the address of that "Post Office" website, maybe one of us support helpers can figure out the exact reason for that.

SharePoint 2013 - Unable to open Office documents in Internet Explorer - cannot access file

In SharePoint 2013 some of our users receive an error message when trying to open an Office application from Internet Explorer 11. Other users on the same browser don't have this issue.
Any ideas on how to resolve?

HI Greg,IE11 is having some issues with the SharePoint 2013.
http://expertsharepoint.blogspot.de/2014/08/issues-with-sharepoint-2013-and.html
Since
SharePoint 2013 fully support IE 32-bit version above 7, there might be compatibility issue with other browsers. I’d recommend you use IE 8,9,10 32-bit for optimal
Performance.
3.
Make sure the IE (Internet Explorer) Version should be 32-bit and not
a 64-bit
- See more at: http://expertsharepoint.blogspot.de/search/label/Known%20Issues?updated-max=2014-08-19T17:33:00%2B08:00&max-results=20&start=4&by-date=false#sthash.a2N14nDL.dpuf
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Recently I have been unable to access hyperlinks from my email account. How can I fix this?

Recently I have lost the ability to access hyperlinks from my email. Need help fixing this issue.

Try quitting Mail and then reset the iPad. Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

How do you access files FROM a home network TO a CLIENT computer using "internet sharing" from a mac ?

Hi.
I just created a small network: 2 pcs and 1 mac.
2 pcs are using windows XP
1 Mac is using OS X
I would like to know how to access files from my pc1 to pc2 from my network.
Pc2 obviouslys is a client behind the intenet sharing my mac is providing.
I tried looking for the info online but most of the search brigns out "internet sharing" or "file sharing."
Any help would be great.

The following may help with the file sharing issues: OS X Mavericks: Share your files

How to Access data from SAP Content Server through SAP Portal

Hi Experts,
I want to aceess the data from SAP Content server through portal. Currently I am working on LSO business package. The SAP content server should work like Webdav as we uses KM as webdav.
I am trying to use this URL into the CMS address but it is not working
http://XXX-XXX-XXXX:1090/ConTentServer/ContentServer.dll?adminContRep&operation=docIdList&contRep=ZADGAS_LSO
Is there any other procedure for acceesing the DATA from SAP content server. ?
Thanks,
Ahmad

If your Content Server is being used by DMS, then you can use the DMS Connector for KM. This connector allows all documents stored in DMS to be accessed in Portal as if they are stored in KM. For more info see this:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/42/d289b446076bb2e10000000a1553f6/frameset.htm
Andrew

I unable to access SDN from my office network through Internet Explorer.

Similar Messages

Maybe you are looking for